HP 8600 All-In-One Printer - How to Replace Encoder Cables Inside

Does someone out there have a PDF file that has a picture of where the encoder cables go inside Hp 8600 Pro Plus? These encoder cables are about 6mm wide/10mm long and 5mm wide/10mm long. I accidentally pulled them out when I thought that they were pieces of paper causing the jam. Now the error message about the jam can not be cleared since I pulled the cables out.
I already called HP support and I was told that I have to look for my receipt.
Thank you!

Hi - I know this is late, but just came across your post. If you still need instructions, try following the detailed instructions in this post by Bob Headrick - while the printer may not be identical, it should be close.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Similar Messages

HP 8600 all in one Printer Scanner to Computer with Windows 8

i can not get the printer to reconize the Computor i want to scan to i Have HP Printer 8600 all in one printer and HP computor with Windows 8 (wireless)

Hello Stringfield, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would like to help.
I would suggest performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then recommend downloading and running the HP Print and Scan Doctor.
Please let me know the results. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Do I need to download drivers for an HP 8600 all in one printer after upgrading to Mavericks from Mountain Lion?

I am about to upgrade my Mac's OS from Mountain Lion to Mavericks. I recently networked to my Mac on our home wireless network an HP 8600 all in one printer/scanner and an HP LaserPro 127. I saw a note posted in a non-Apple forum stating that the Mavericks upgrade should include the drivers needed to run these products on Mavericks. Is that correct or will I need to download a new set of drivers from HP after I upgrade to Mavericks?
Any guidance would be appreciated.

Hi mcubed33,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link below for more information:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/HT3669
Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
OS X Mavericks: Set up a printer
http://support.apple.com/kb/PH14143
Cheers,
- Judy

Hi I have a Lexmark all in one printer how do I get it to work with my ipad mini

Hi I have a Lexmark all in one printer how do I get it to work with my mini ipad

It depends upon the model. It's wifi-enabled ? And is it listed on this page as supporting AirPrint : http://support.apple.com/kb/HT4356 ?
If not then do Lexmark have their own app in your country's store that supports that model ? If they don't then there are a number of third-party printer apps such as Print n Share and PrintCentral Pro which might work with it.

Hp officejet pro 8600 all in one prints but won't scan

I have recently moved house and changed my wireless router from BT to Virgin.
I am running OS X 10.9.5
I am able to print from my mac without issue, however, it has stopped scanning. I have managed to get it to work twice on isolated instances but it won't work consistently.
I have unistalled the software and reinstalled via the HP download page but when I open HP Scan and click scan it asks me to choose which scanner - mine is selected, it then says preparing to scan and it does that for ages until it says it can't get a connection.
My printe r is a HP Officejet Pro 8600 All-in-one N911g - I am not bothered that much about scanning from the printer to the computer (I have tried to enable this option and it won't let me) I just want to be able to open HP Scan and press scan and it scan on my computer.
Any advice appreciated - thank you

Hi there @Steph390 , welcome to the forums!
I have some suggestions for you to hopefully correct the scanning issue you are having. Please feel free to reply back and let me know the results!
1. Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer.
2. Mac OS X: How to reset the printing system
3. Repair disk permissions
4. Restart your computer.
5. Re-add the printer
Once the printer is connected on the network, follow these steps to maintain the wireless connection, normally a static IP will help out quite a bit: Printer Does Not Maintain Wireless Connection
Good luck to you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Hp 8600 All in one printer problem with scanning through wired network its very slow!

Hi
i have problem with scanning thru network which takes almost more than 2minutes very slow compared to scanning when printer connected locally with USB. i need some solution to fix this issue. Plz advise me what needs to be done prior to scanning?

Welcome to the community @Larrypat
I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
Also let me know which model from the C7200 series you have:
HP Photosmart C7250 All-in-One Printer
HP Photosmart C7280 All-in-One Printer
HP Photosmart C7288 All-in-One Printer
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
Let me know how it goes and the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I have a hp deskjet 3050 all-in-one printer how can i setup for wireless printing my os is windows7.

how do i setup my hp deskjet 3050 all-in-one printer for wireless printing my operating system is windows7

Unplug the USB cable. Now go to Start > All Programs > Hewlett-Packard > Deskjet 3050 > Add a Device. Run the program and choose Wireless as the installation type.
Follow the directions. It will ask you to connect a USB cable temporarily. Do not connect until it asks and remove it when it tells you.
Finally, when you are done, go to Control Panel > Devices & Printers and delete the USB instance of the printer so you don't get confused when printing.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet Pro 8600 All in One printer - printing wirelessly from an IPAD

I'm trying to connect a HP Officejet Pro 8600 to our university campus wireless network for the purposes of printing wirelessly from an IPAD. The printer finds the wireless network when going through wireless wizard setup but gets a message that the wireless network is using security that is not supported.
The campus wireless network uses:
Security type: WPA2-Enterprise
Encryption type: AES
Can anyone tell me if these are supported by this model printer?

Hey ibebry,
The printer is designed to be used with WPA2 - Personal and not the Enterprise version. From the wiki artricle on WPA encryption:
WPA-Personal Also referred to as WPA-PSK (Pre-shared key) mode, it is designed for home and small office networks and doesn't require an authentication server. Each wireless network device authenticates with the access point using the same 256-bit key generated from a password or passphrase.
WPA-Enterprise Also referred to as WPA-802.1X mode, and sometimes just WPA (as opposed to WPA-PSK). It is designed for enterprise networks and requires a RADIUS authentication server. This requires a more complicated setup, but provides additional security (e.g. protection against dictionary attacks on short passwords). An Extensible Authentication Protocol (EAP) is used for authentication, which comes in different flavors.
If the network is using WPA-Enterprise, then most likely the 8600 will not be able to connect. Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

HP Officejet Pro 8600 all-in-one printer Cancels Print in Middle of Job

My Printer began working fine, now it is suddenly stalling and cancelling the print job in the middle of printing. Please let me know what I can do to fix this issue.

Hi @mgsamuel,
I would be happy to help you with your Officejet 8600. I understand it was working well, now suddenly it is stalling and print jobs are cancelling on their own.
Running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly diagnose and resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> >>>>> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
Please use the thumbs up below if you happy with my efforts to help. If the issue persists, I will do all I can to help works towards a solution. Thanks, I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Officejet pro 8600 all in one printer

I have windows 7 on an hp pavilion p7 desktop. I am trying to install an officejet pro 8600 on it. I have had this printer hooked up for months and working right but when it was unplugged it stopped doing what I want. I have it hooked up by a USB cable directly from the printer to the pc. I have 2 papers in the queue to print and I can't get them out..This pc is not on a network. I have uninstalled & reinstalled it 5 times and tried to remember how I finally got it to work for me before...But No luck...Can anyone help? Also wouldn't let me download Driver & update features from H.P. It does print out a test page when I try it and will print stuff that the PC says to but will not let me print anything...Thanks

Hi @Normill
I will do my best to help you print with your OJ 8600
When you said "It does print out a test page when I try it and will print stuff that the PC says to but will not let me print anything" are you meaning that it will print PC test pages but not from say Word?
I'd recommend that you download and run the HP Print and Scan Doctor and let me know if it finds any issues. If it does, please follow any suggestions it may make to get a resolution.
Hope to hear back from you soon!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

HP 8500 All-in-one printer - how can I print in black and white only (to save color ink)?

I want to be able to select the option of printing in black and white only to save color ink. How can I do that?

What operating system? You can generally find an option for "Print in grayscale" and "Black ink only" in the Color or Advanced tab of the Printer Settings.
Some color ink will still be used to keep the printheads from clogging, see here for information. (The Officejet 8500 is an IIC printer in the vocabulary of that page.)
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

My 8600 all in one printer wireless not working

Dear Sir or M'am
The computer had been working properly until now. This am I have already printed today with no probs).Now it shows wirelees is off and locked says system administrator needs to correct. I am the only one who uses this computer

Welcome to the forums @captainpatty ,
I saw your post and I would like to help you! I am first looking for some more clarifying information from you, just to make sure I understand the situation you're in.
Where are you seeing that the "administrator needs to be correct"?
Are you seeing this message on the computer screen or the printer display?
Is it asking you for a password?
Have you tried any troubleshooting, and what have you tried?
Please let me know what you're seeing and I will do my best to help.
Have a great Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How do i reduce the size of a document when printing on my HP8600 all in one printer

I want to reduce the size of a document when I copy it on my HP 8600 all in one printer. Can it be done?

Hi,
Yes, from the printer control panel:
Various settings available from the printer's control panel, including the following:
• Number of copies
• Copy paper size
• Copy paper type
• Copy speed or quality
• Lighter/Darker settings
• Resizing originals to fit on different paper sizes
Touch Copy, Settings, Resize, Custom ... then Done.
Back to Copy menu then touch Black or Color to copy.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP All-in-One Printer Remote App For Windows Phone 8.1 Troubleshoot

Dear HP,
Device Nokia Lumia 520
OS Windows Phone 8.1
Printer HP Officejet Pro 8600 All in One Printer
I have installed HP All-in-One Printer Remote on my smartphone as well as on my PC having Microsoft Windows 8.1. The PC app is running
fine but on my smartphone, app can't find my HP Wireless printer. All Devices(PC, Smartphone, Printer) are connected to same wireless LAN Network.
Regards
Sahyog Vishwakarma
Mob.: +91-7206369455
Yamuna Nagar
Haryana

Hi,
The app for Windows phone is a BETA version. In my case (also a Nokia) it can find my printer but when sending something to printer, printer won't print. Again, it's only a BETA version.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP OfficeJet 8600 All-In-One cannot be connected

I just bought a new HP OfficeJet 8600 All-in-One printer. It's a wireless unit and initally connected to my home
network no problem and I could print from several puters in the house fine. I have Bell internet with a wireless
home router that uses DHCP.
Today, my wifes win7 laptop is unable to print to it for some reason. I tried to delete the printer from her computer
and re-add it however, the computer when I run the HP installer software to reach the printer, it isn't able to connect
to it. During the installation, it say:
Discovering Device....
and never leaves there.
However, I can define the printer in Windows "Add a Printer" using the HP OfficeJet K8600 printer driver.
One thing on the IP address that the printer is using. I checked it on the printers configuration vs what the windows
printer definition had and it was wrong on the printer driver configuration. I used the HP utility to update the printer IP
address to what the printer is currently using.
Any ideas on why the printer cannot be re-added using the HP all-in-one installer?

I would bet it is your router. Its supplied by your ISP, right?
First, restart the router by pulling its power cord momentarily.
Next, set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP 8600 All-In-One Printer - How to Replace Encoder Cables Inside

Similar Messages

Maybe you are looking for