Hp 8600 All in one printer problem with scanning through wired network its very slow!

Hi
i have problem with scanning thru network which takes almost more than 2minutes very slow compared to scanning when printer connected locally with USB. i need some solution to fix this issue. Plz advise me what needs to be done prior to scanning?

Welcome to the community @Larrypat
I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
Also let me know which model from the C7200 series you have:
HP Photosmart C7250 All-in-One Printer
HP Photosmart C7280 All-in-One Printer
HP Photosmart C7288 All-in-One Printer
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
Let me know how it goes and the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

HP Deskjet 3520 e-All in one printer trouble with scanning network, connection and very slow print

Dear all
I bought two days ago HP Deskjet 3520 e-All-in one printer serie, but i have some really bad issues with the scanner! I have searched on the internet and i couldn’t find anything to solve the problem.
I have installed the printer according to the book of the printer, so everything did go well(i think), except that i can’t connect the scan to my computer, a Mac OS X (i am connected with the printer). I get directed to the website where i can connect the scanner, but every time i try to connect it with wi-fi, i get two notification, one from my computer (from HP Itility (Dutch) program) that the connection is off and second from the website that i have to make sure that i’m connected with internet (which i am) and to check the IP address if it is the same with my computer (which is the same).
Obesely something did go wrong, but i can’t find the problem.
Beside when its copy or prints a document (no matter how many pages) it’s very slow. It takes 10 -15 minutes till the printer starts. Has it something to do with the problem i’ve got with the scanner or is the printer always so slow? Because the very first time, when i installed the printer, it printed very fast.
By the way i also print the test-results to check if there is a problem, but according to test-results there are no problems at all.
I hope that someone recognize this problem and can help me to solve it.
Regards,
Esra

Hello chesterpascual,
Welcome to the HP Support Forums!
Regarding the Deskjet 3520 and the error to use setup cartridges, you will need to call HP's Technical Support to see about sending some to you.
Click here to locate the contact information.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP C309a All in one Printer - Problems with printing documents the correct size.

Hi I recently purchased an HP 309a as a replacement for an EPSON printer which had to be replaced a couple of times so I thought I would change manufacturer.
The HP printer prints well in post places but when I print from Excel on an A4 scale it only prints 3/4 size on an A4 page. I tried everything to get it to print the correct size. I have adjusted the settings to scale to A4, print boderless etc and it just will not print correctly.
It seems to be ok in Word and many other programs so I don't know why there is an issue with Excel. Iam I missing something, please help.
Also is there any way to default the printer to A4 automatically instead of 8" x 11".

I also have issues using this printer with Excel/ Word.
When I am using Excel or Word I have to remove the HP 309a as my default printer.
when set as default, excel and word just "hang" for up to 3 minutes when opening or saving.
I called HP who said the printer works with all other files so basically it's tough. One of their tech guys tried to sort it out but couldn't.
Has anyone else had this same problem? If so, how was it resolved?
£300 for a printer that doesn't work with MS. It's not funny and I won't buy HP product again.

HP 4622 All in One Printer: Problem with Printer or Ink System

Problem with Printer or Ink System Error OXC19a0027.

charleshia wrote:
Thanks so much for replying to my post. I tried the fist suggestions and they did not work. So, I attempted to move on Dow to the cleaning of my printer. I am the the first to admit that I'm not the genius when it come to electronics buys, my printer do not seem to have what is described in the photos. I'd like to upload a photo of my ink cartage but do not know how.
Charleshia, you can upload a photo here to reply. Click Reply, then on the window you'll see the image below..
click the one which has the red box, it's where you insert the photo
Going back on your issue.. the basic step would be.. take out the inks then close the door... what error message you got? If it's saying "Missing Ink Cartridge" just hit OK. Unplug the power cable at back of the printer, plug it back in.. Clean the copper contacts on the ink cartridges using a lint free cloth then reinstall them. Let me know if it resolved it or not.. I can only give basic troubleshooting here

7410 All in one printer problems with working all of a sudden.

My printer seems to have disappeared from my printer list. I have removed the software and re-installed, it sees the printer but nothing shows up in the printer list like it used to. I have set it on a static IP on a wired network. I started running the HP tech assistant and it failed on the Windows item 3rd in the list. The first 2 items passed. It said to power cycle both printer and computer. Did that and same error again. I can't re-run that thing right now but it starts doing things with the scanner when I try to run its fix part of the program and that is where the error comes in. I can't scan, print or fax from the computer any more. I have other computers here and the software works on them so it is something within this machine. Only software added was PC Speedup from the web. Seems to match that time frame when it was put in. It resolved other problems I was having but seems to have screwed up the HP software.
When I try to re-install the software file (latest from the web site) it sees the printer IP, asks if it is the one I want to install which I answer yes to and it goes on its marry way finishing the installation but nothing shows in the printer list after it is done or after it is rebooted.
Any ideas on what to do next?
Don.

Hello dh-agi,
It sounds like that PC Speedup certainly messed something up (probably in the registry). You may have to do a system restore to a point in time before you did so.
However, before you do that, I recommend 'scrubbing' the existing printer installation(s) and starting 'fresh'. To do this, follow the instructions below:
If you are installing from Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open My Computer, and then right click on the CD drive and chose open
3. Open folder Util
4. Open folder CCC
5. Run the L4uninstall (unless you have an HP PC, then run L3uninstall)
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player using the link below
Adobe Flash Player
9. Download the latest full feature software and drivers using the link below
http://goo.gl/q2hE0
10. Run the download to reinstall the printer
If software was downloaded and extracted to your system:
1. Hold the Windows key + r key, type %temp% in the run field, then hit Enter
2. Look for, and open a folder starting with 7z (Example: 7zS2356)
3. Open folder Util
4. Open folder CCC
5. Run the L4uninstall (unless you have an HP PC, then run L3uninstall)
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Windows System Tools
8. Download and install the latest version of Adobe flash player using the link below
Adobe Flash Player
9. Download the latest full feature software and drivers using the link below
http://goo.gl/q2hE0
10. Run the download to reinstall the printer
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP 8600 all in one Printer Scanner to Computer with Windows 8

i can not get the printer to reconize the Computor i want to scan to i Have HP Printer 8600 all in one printer and HP computor with Windows 8 (wireless)

Hello Stringfield, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would like to help.
I would suggest performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then recommend downloading and running the HP Print and Scan Doctor.
Please let me know the results. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Do I need to download drivers for an HP 8600 all in one printer after upgrading to Mavericks from Mountain Lion?

I am about to upgrade my Mac's OS from Mountain Lion to Mavericks. I recently networked to my Mac on our home wireless network an HP 8600 all in one printer/scanner and an HP LaserPro 127. I saw a note posted in a non-Apple forum stating that the Mavericks upgrade should include the drivers needed to run these products on Mavericks. Is that correct or will I need to download a new set of drivers from HP after I upgrade to Mavericks?
Any guidance would be appreciated.

Hi mcubed33,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link below for more information:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/HT3669
Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
OS X Mavericks: Set up a printer
http://support.apple.com/kb/PH14143
Cheers,
- Judy

HP8500A all-in-one can no longer scan thru wireless network but prints fine.

HP8500A all-in-one can no longer scan thru wireless network but prints fine. Have used this device several times over past 2 years on different wireless networks (at home) but usually at some point I lose wireless scan function but maintain wireless Printing. I used to be able to reload the software and resolve the issue but now in this "new network" cannot get wireless scanning to work. Setup software; original software (CD) and current download as well as "Print/Scan Dr" hangs-up at "network check" for hours. Compaq laptop, Dell Laptop, Cell phones and Roku work fine thru network. Scanner works fine with USB to Laptops.

Which model Epsons are they?
I'm assuming you're using Yosemite (OS X 10.10), and that the problem developed when you upgraded from a previous OS.
(Your profile says 10.6.7 BTW).
Maybe the scanning function is not compatible with Yosemite.
You could try a few things:
reset your wifi system:
power down everything: modem, router, computer, printer/scanners.
wait a minute.
power them all up again, in that order: modem, router, computer, printers. Let each power up completely before going on to the next.
try a factor reset on your printer/scanner (if there is such a function). You'll have to check your manual for how. If you do that you'll have to enter the wifi password in your printer/scanner, assuming you have security on your network.
uninstall any printer manufacturer "utilities" that are on your Mac, and try Image Capture again.
If it is a compatible software issue, you could try VueScan, but I've never needed to use it.

After upgrading to Mac OS 10.9 My HP Deskjet F4580 all in one printer no longer scans. How can we fix it?

Hi All,
I recently upgraded to Mac OS 10.9 Mavericks, but now my HP Deskjet F4580 All in one printer will not scan any documents either as PDF or as JPG, how can we fix this?

I have simialr problems, after i scanned the ducuments or pictures, i can save it for only once, but the file is just black pictures with many lines through them. When i try to save it again, then it says ''An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.', which then doesn't allow me to do anything of saving the file or even just to print it out.

1350xi All-In-One Printing problem

I've had a 1350xi All-in-One printer for a long time, and just recently it began printing the test page (for aligning a new cartridge) every time it is turned on. It doesn't seem to matter if it is connected to a computer or not. How can I change this?

scan the alignment sheet immediately after it prints, and that should complete the alignment process. then, the print will stop printing it until you replace the cartridge again.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Looking for an All-In-One Printer Rec. with Mac

Hello,
I'm looking for a Color Laser All-In-One printer, with ADF and Networking capability for under $600. Any recommendations of printers that work well with Mac? I know the HP's are good, but my concern is with their software. I've had nightmare experiences with them.
Thanks!

Bought the HP Color LaserJet 1312nfi for 399.99.

Deskjet 2540 all in one printer - does the scanning work with Mac OS Yosemite 10.10.1 ?

I was trying to scan a document using this new printer and my Mac OS Yosemite 10.10.1 and I cannot even find the page that allows me to scan since now it is all through the computer. Is this printer compatible with this operating system? and if so, what can I do to see the page where the file actually shows up to scan?
thanks,
Natali

Hello NatDeskjet2540,
Welcome to the HP Support Forums!
Regarding your inquiry into scanning with 10.10 and the Deskjet 2540, I would like to help. The software you need to install is here: HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. Once installed, you can access the the walk through here: Scan from OS X v10.9 Mavericks With the Full Feature HP Software for HP Multifunction Printers.
Hope this help, let me know.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

All in One printer issue with Windows 8.1 update

Hi all,
Hoping someone out there may be able to help with the following.
I have a Canon MG8250 all in one printer/scanner. All was fine on Windows 8, but then upgraded to 8.1 a couple of weeks ago. Just got round to using the printer and scanner and the printer wouldn't work (scanner was fine). Uninstalled MP drivers and reinstalled from Canon site and all seemed fine with the printing. Alas the scanner now would not work. Did the same, uninstalled MP Navigator Ex and reinstalled from Canon site, but no fix this time. PC says "Cannot start MP Navigator Ex" and printer says "Set PC to start scanning".
Anybody know how to fix?
Thanks,
Peter

Hi @louielou581 ,
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the email address in your post. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Hp officejet pro 8600 all in one prints but won't scan

I have recently moved house and changed my wireless router from BT to Virgin.
I am running OS X 10.9.5
I am able to print from my mac without issue, however, it has stopped scanning. I have managed to get it to work twice on isolated instances but it won't work consistently.
I have unistalled the software and reinstalled via the HP download page but when I open HP Scan and click scan it asks me to choose which scanner - mine is selected, it then says preparing to scan and it does that for ages until it says it can't get a connection.
My printe r is a HP Officejet Pro 8600 All-in-one N911g - I am not bothered that much about scanning from the printer to the computer (I have tried to enable this option and it won't let me) I just want to be able to open HP Scan and press scan and it scan on my computer.
Any advice appreciated - thank you

Hi there @Steph390 , welcome to the forums!
I have some suggestions for you to hopefully correct the scanning issue you are having. Please feel free to reply back and let me know the results!
1. Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer.
2. Mac OS X: How to reset the printing system
3. Repair disk permissions
4. Restart your computer.
5. Re-add the printer
Once the printer is connected on the network, follow these steps to maintain the wireless connection, normally a static IP will help out quite a bit: Printer Does Not Maintain Wireless Connection
Good luck to you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

All in one printer compatible with Mavericks

I have an Epson Stylus NX 430 which I've been unable to use since "upgrading" to Mavericks. Tried my HP Scanjet G3010 - also not compatible. I just need the name of an all in one printer/scanner that *is* compatible with Mavericks.
Thanks for any suggestions.

Judith,
It says in this Doc that the NX430 Printer driver is available. - so I think it will work for printing.
http://support.apple.com/kb/ht3669#epson
You'll have to check with Epson about scanner driver.
Have you been able to print? Do you get some error message? Most common one is "unable to download driver from the server." That just means you need to Reset the Printing System, then Add the printer:
http://support.apple.com/kb/PH14141

Hp 8600 All in one printer problem with scanning through wired network its very slow!

Similar Messages

Maybe you are looking for