Hp 8600 quits in the middle of a print job

I have an HP 8600 that when I send a large print job stops printing in the middle when I print from mail merge.  I get no error message on the computer, it just stops printing.  When I check the print job status it gives me an "error - sent to printer" message, but there is no error message on the printer.  I restart the print job from where it left off and it will print a few more and give me the same error message.  So I restart again from where it left off and it will print for a little bit more and stop with another error message.  Each time I restart the printer prints less and less of the job.  Say I have 100 entries to print, I'll get 50 the first time, then 25, then 15, then 5 then...well you get the idea.  Its more than a little frustrating.
I forgot to mention I am working on a 32bit Windows 7 premium system loaded on a Toshiba Satellite
I also forgot to mention that when it stops, the last page it prints is blank.

Hi hp_issed & TXGabe,
I understand that both of your HP Officejet Pro 8600 printers are not able to print correctly and quit in the middle of jobs.
What is the firmware version of the printer? click here to find out how to retrieve it.
Which Windows operating system are you running?
Is the printer connected via USB, ethernet or wireless?
Is the power to the printer connected directly into a wall outlet or a surge protector?
Thank you,
I worked on behalf of HP.

Similar Messages

  • HP DeskJet D1660 hangs in the middle of a print job?

    My HP DeskJet D1660 occasionally hangs in the middle of a print job.  No error message appears but the light in the power button is blinking.  I have tried opening the printer queue and deleting the job.  The queue switches from status "printing" to status "deleting" and hangs with the queue never deleting the print job.
    Solutions tried: turning off printer, unplugging printer, unplugging and replugging the USB cable.  None of these clears the queue or restarts the printer.  Restarting the machine also did not unclog the queue initially, however, after a lot of cable unpluging I got it cleared and was able to use the printer again.
    Today It stopped in the middle of a print job again this time with an Excel spreadsheet (the first was printing a web page).  After trying some of the same fixes again but before powering down the computer I somehow got the HP Guided Solution up (I"m not sure what I did to trigger it).  Using this help system I managed to get the queue unclogged and the printer up and running following about ten different steps.
    Why is this problem starting to reoccur.  Is there a permanent fix or will I have to struggle thru the process of stopping and starting the print spooler every time it happens.

    Hi hp_issed & TXGabe,
    I understand that both of your HP Officejet Pro 8600 printers are not able to print correctly and quit in the middle of jobs.
    What is the firmware version of the printer? click here to find out how to retrieve it.
    Which Windows operating system are you running?
    Is the printer connected via USB, ethernet or wireless?
    Is the power to the printer connected directly into a wall outlet or a surge protector?
    Thank you,
    I worked on behalf of HP.

  • Strange characters and symobls print in the middle of a print job. Help.

    In the middle of a print job, whether one page or several, it starts printing strange characters and symbols until the end of the job.  It will do this in the middle of the page, or after printing one line of English and the rest of the page in gibberish.
    It usually does this while printing off bank statements from the internet or a pdf file pulled from the internet.  I don't think it has ever printed any of my documents.
    However, it has done this while printing a bill received as an attachment to an email from a friend.
    The next print job will usually be back to "normal".  But one day, it did this many times during the day.  Frustrating!
    Appreciate any help.

    I had this happen to me with a PDF file once.  I called Support at HP, 
    and they told me it was because I had labeled the PDF as "text" when
    it actually has (technically) "pictures" in it -- the printer didn't know how
    to print those "pictures" (symbols?) as "text," so it came out as gibberish.
    Perhaps there's a teckie here who can tell you more eloquently.  [And
    what to do about it!]
    HTH!

  • IPhoto video record quit in the middle of recording. Help!

    The app quit in the middle of recording a video. I can locate the incomplete file in finder but cannot seem to get it to convert or open....help please!

    iPhoto has no ability to record video - or anything else. Perhaps you mean PhotoBooth? Ask about that on the Using OS X forum for your version of the OS.

  • Song quits in the middle on 4th generation iPod touch - HELP

    My iPod touch 4th generation quits in the middle of a song.  Then it will play a song all the way through once or twice before it quits in the middle again.  How can I stop this?  Please help

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, and it does not connect to other networks, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • IPad quits in the middle of many apps

    My I pad seems to quit in the middle of a variety of apps making the unusable.
    The most recent was the John Stewart show and the Colbert report. Also a PDF form filler
    quits among others.does anyone else have this problem? I have reset it a number of times as suggested.

    Hello and welcome.
    Try restarting your iPad when this happens, not the same as resetting. Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
    If apps continue to quit unexpectedtly, connect your iPad to your computer. Launch iTunes. Make sure iTunes recognizes the iPad under Devices on the left side of the iTunes window. Then click: *Check for Update.*
    quit in the middle of a variety of apps making the unusable.
    If the iPad software is up to date, click Restore then click *Don't Back Up*. The reason being is there might be one or more apps causing the problems.
    Once you have restored the iPad, sync several apps at a time from the Apps menu in iTunes then try those apps on the iPad. If it's ok, then try 3 more apps and so on.
    And while you have the iPad connected to your computer, look at the bottom of the the iTunes window under any of the tabs and check to make sure there is enough free storage space.
    Carolyn

  • Ipod touch quits in the middle of reading an article or watching video. only since I downloaded the latest software upgrade, any suggestions?

    ipod touch quits in the middle of reading an article or watching video. only since I downloaded the latest software upgrade, any suggestions?

    Have ylu tried the standard fixes:
    - Reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • TS1538 iphone5 went in recovery mode after replacing power button, everything went well in the repair  ,try to restore but it quit in the middle of the process

    iphone5 went in recovery mode after replacing power button, everything went well in the repair  ,I try to restore but it quits in the middle of the process and go back to i tunes logo please help I been without my phone for a week.

    Hi
    did you get any reply?
    I have the same problem I dont know what to do..
    Regards

  • TS1362 some songs quit in the middle of the track even though there is time showing. It goes right to the next song.

    Songs quit in the middle of the track even though there is time showing. It goes right to the next song. Can I fix this or recover the full song?

    I just found out how to solve the problem today
    Go to the original location of the song. Meaning, if the song file is on the desktop then go there and individually click the songs and they'll play on Itunes perfectly fine
    I'm not sure why this happened but I hope that works for you!

  • My iMovie quit in the middle of editing a movie.  I have    got the movie back but w    ithout all the editing I had already done. I can't find the semi-edited version.

    My iMovie quit in the middle of editing a movie.  I have been able to get the movie back, but without all the editing I had already done.  I don't want to have to re-edit it all again (hours) and can't find it anywhere.  I have 809 GB free of 999.35 GB on the hard disk.  Please help!

    Go to your purchase history, click on "report a problem" and report the problem. Apple will respond and they will likely provide a free re-download.

  • How to stop itunes quitting in the middle of playback

    Hi everyone. Does anyone know how to set my iTunes or Mac up so that iTunes won't quit in the middle of playback? I'm streaming to my TV using Apple TV, and after a while, my screen goes blank and when I go back to my computer to check, I find that iTunes has logged out or quit. I've already set my energy saving preferences to 'never sleep' but this still happens and there is no iTunes preference to prevent it from happening. Any help would be most helpful. Thank you!

    Pages version? Number, please!

  • Desktop Manager quits in the middle of sync

    Desktop Manager just quits in the middle of a sync. I've isolated the offending application to calendar sync with MS Outlook. No warnings, no errors, Desktop Manager just stops running. I tried upgrading to the latest version of Desktop Manager 5.0.1.28, no change. I've tried deleting the Intellisync directory and the problem just reappears after recreating the sync settings.
    Bold 9700
    Windows XP
    MS Outlook 2007

    Hi and Welcome to the Forums!
    You might try turning on advanced logging to see if that provides you with any more data.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Iphone 4 quits in the middle of apps / games / ipod -

    New Iphone 4 (4.2.1) continuously stops in the middle of any app and returns to the home screen. I've closed all safari windows and shut down all apps as well as turned the phone off then back on with no luck. Any suggestions?

    Same problem here, iPhone 4, with 4.2.1 using the iPod app that comes with the phone, music quits after 4-5 minutes. Other apps quit as well. I have shut down all apps, rebooted the phone, still have the same problem.

  • HT201263 so i followed the instructions but i have to update first and when i try to update it cant it quits in the middle please help me for the sake of my ipod touch 4th gen

    please help my ipod out of this rebooting loop the update doesnt work

    as in the loop it shows the apple logo on the screen and right as it gets out of reboot it flashes white and goes back to the apple logo and does it none stop its not in DFU mode because ive tried, and by it quits it has to update before i can restore and in the middle of the update it gives me a notification with a number on it the number is really long and has alot of 0's and i think one 7 so i hope that help your question for my question

  • My iPad Air will suddenly quit in the middle of an application and return to home screen.

    Can anyone tell me why my iPad Air will suddenly stop in the middle of an application, (usually a game), and return to
    my home screen?  Thanks

    (A) Try reset iPad
    Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
    Note: Data will not be affected.
    (B) Close all apps in the multi-task window
    1.Double-click the Home button.
    2. Swipe the app's preview up to close it.
    3. Preview will fly off the screen.

Maybe you are looking for

  • Mentioning the index in the select query?

    Hi All, I want to write a query on AUFM table having where condition for AUFNR field. This table has 2 secondary indexes. 1st one on {MATNR,CHARG,WERKS, BWART,BUDAT} and 2nd one on I want to specify 2nd index in my select query . How can I mention th

  • How to transport the changes of lsmw "Read display Program" changes to prod

    Hi, i have made some changes in the SAP generated program /1CADMC/SAP_LSMW_READ_<>. i.e., in step : Read display program the issue is that i made changes...but the changes are stored in $tmp. now how to move these changes to Production. when i assign

  • Can I work in ID CS3 from version 4?

    I am a student and currently have CS2, I am looking to upgrade to CS4. I have to go to CS4 because I can no longer get CS3 at a student price, however everyone I work with and the university mac labs all still use CS3. I understand when using InDesig

  • Boot camp not working in windows installer

    When I install windows 7 I get to the select partition section. I get a message after selecting the right one saying "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more informati

  • Netflix quit streaming on new Mac Mini

    Hi... I just purchase a new Aluminum Mac Mini last week. I was able to stream Netflix the first night I had it. Two days later, I upgraded the RAM to 8 GB and updated Silverlight, Perian and Divix. Now I get a connection error when trying to stream c