Hp 932c printer sends a blank page after printing. Win7. suddenly started doing this.

This suddenly started a couple of days ago.

Hi there lonelyshepard,
Just to make sure this is not software related lets try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

Printer sends extra blank pages

I have an HP all in one Photosmart C7280. Recently, the printer started sending a blank page after ever printed page. This happens whether I am sending a single page document or a multipage document. It happens whether I am printing from any of my software products or from a downloading web document.
Any ideas??

This may be overly simplistic, or not apply.
The same thing has happened to me in the past within office, and I realized what was happening. If I was to create a document, and thereafter remove text, I would get a blank page as supplemental to the printed one. What I realized was that I needed to set the cursor at the end of the text, and delete everything beyond. This way, in some instances, I had one less page than I started with, and the printer only produced pages with text and no extra. I don't know if this will help you or not. I'm waiting for someone to help me with my issue and happened to run across yours. Good luck either way.
Tom

OK! I am unable to type into any pages documents ... just started doing this. Tried opening new page ... no luck ... thries to edit a current paper... no luck!!! Help, anyone have an idea what I have done?

OK! I am unable to type into any pages documents ... just started doing this. Tried opening new page ... no luck ... thries to edit a current paper... no luck!!! Help, anyone have an idea what I have done?

Try a new post in the Pages forum. They would know better then us.
DALE

Firefox 17 on Windows 7 prints blank pages after printing selection

I need to be able to highlight text on a webpage and print only that text using the print selection inside the file/print tab. However, instead, I am getting only that highlighted text AND then blank pages (with headers and footers) keep printing (how many pages that print depends on the actual size of the webpage).
I have Windows 7, 32bit and Firefox 17. I updated Firefox this morning and restarted but the problem still exists. I did not have this problem when I had Windows XP.
The print selection works properly in IE9.

Firefox's Print Selection feature has always left much to be desired...
What I get is blank pages ''before'' the selection but not after. You get blank pages for the entire document? That's especially unhelpful.
I am aware of two ''workarounds''. Each isolates the selection by itself so you can print it normally, i.e., without choosing Print Selection.
'''[https://addons.mozilla.org/en-US/firefox/addon/nuke-anything-enhanced/ Nuke Anything Enhanced]'''
After installing this add-on, when you have a selection and right-click it, you can choose "Remove everything else" to isolate the text for printing. Note that you need to reload the page to see the rest of the content again.
'''Bookmarklet'''
Before learning about the above, I wrote a small script to isolate the selection for printing. I wouldn't use it if you are filling in a form, making a purchase, etc., since the script duplicates part of the page and this may break the form. On the other hand, at least there is some level of undo without reloading the page.
If you want to try it, here are the steps:
(1) Select and copy the following line of script (it's all one long line):
javascript:var sel=window.getSelection(); if(!sel.isCollapsed){var rng=sel.getRangeAt(0); if(!rng.collapsed){var docfrag=rng.cloneContents(); if(!document.getElementById("divHideMe")){var rng2=document.createRange(); rng2.selectNodeContents(document.body); var myContainer=document.createElement("DIV"); rng2.surroundContents(myContainer); myContainer.setAttribute("id","divHideMe"); rng2.detach();} myContainer.style.display="none"; if(document.getElementById("printFrag")){var myFrag=document.getElementById("printFrag"); while(myFrag.firstChild) {myFrag.removeChild(myFrag.firstChild);} myFrag.style.display="block";}else{var myFrag=document.createElement("DIV"); myFrag.setAttribute("id","printFrag"); document.body.appendChild(myFrag);} myFrag.appendChild(docfrag); rng.detach(); var myP=document.createElement("P"); myFrag.appendChild(myP); myP.setAttribute("id","killBtn"); var myBtn=document.createElement("INPUT"); myP.appendChild(myBtn); myBtn.setAttribute("type","button"); myBtn.setAttribute("value","Return to Page"); myBtn.setAttribute("onclick","document.getElementById('divHideMe').style.display='block'; document.getElementById('printFrag').style.display='none';"); myStyle=document.createElement("STYLE"); myFrag.appendChild(myStyle); myStyle.setAttribute("type","text/css"); myStyle.setAttribute("media","print"); myStyle.innerHTML="#killBtn{display:none}";}} void 0;
(2) Right-click the Bookmarks Toolbar and choose New Bookmark. (If you do not ordinarily display the Bookmarks Toolbar, you can add it to the menu instead. Whatever will be convenient.)
(3) Click in Location and paste the script.
(4) Click in Name and name it whatever you like (I call it Crop4Print) and then click Add.
Now after selecting text, click the bookmarklet button to hide the rest of the page.

New hp envy all in one printer shows a blank page after scanning

I just went through this problem with my old printer and hp sent me a refurbished (new) one. I go to scan something into my computer and it won't scan. It shows a blank page on preview. I checked the settings and they all seem to be right. I am not wanting to spend 3 hours with support and another 3 weeks to get a new printer. Can you help me?

Please check the copying function. Is that blank.
If the printer is copying blank there could be something else wrong with the Envy 120
We have had reports of pages being placed upside down.
The Envy 120 scans with the original facing up.
Russ@HP
Say thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution
(Although I am employed by HP, I am speaking for myself and not for HP)
+++++++++++++++++++++++++++++++++++++++++++++++++++++++

Why does my HP LaserJet 4 Plus put out blank page after print page?

why does my laser Jet 4 Plus put out a blank sheet after every print page

This sounds like an issue that could result from having A4 sized paper but having the printer settings set for A size. Please check the paper settings.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Cannot print -- random text & blank pages when printing -- HP Color Laserjet 3600N

Apple Support Community,
I'm having some trouble connecting my computer and printer via a network connection. The printer functions fine among other computers (Mac, PC) connected via a network connection, but one particular MacBook is giving me trouble.
I can get the printer and laptop to connect, however when I try to print, it gets buggy on me. Usually it will print a page with some random text, followed by an excess amount of blank pages, then another page with text similar to the first. The text usually has information including font types and other formatting data, but not what was "printed."
I have tried to update the printer drivers, but I cannot get the printer utility to utalize them. After installing the most recent drivers, it will continue to suggest the generic laser printer drivers (1.0 verison), or I can choose other printer drivers (including "base" 3000 model drivers), but the 3600N drivers are not avalible on the list. Both the generic drivers and the HP drivers give me the random text upon printouts.
The laptop is a MacBook Pro with 10.6.
What is the best course of action to remedy the printer problem?
Thanks!
Jel.

Over the holidays, I spent a couple of hours on the phone with HP, a couple with Microsoft, and previously with Apple. Microsoft said they are working on updates, should be fixed by the release of Office 2008. Apple says there's a compatibility issue among the HP printer and Leopard and "some" programs. HP tells me it's an "old" printer (which they were happy to sell me in April 2007) and they may not release new drivers. HP also says Apple knows there are printing issues.
In the meantime, I'm using Pages and shopping for a new non-HP printer.

Printer dispenses a blank page after every printing!

Suddenly my printer is dispensing a blank sheet of paper after almost every printing. Oddly, the only thing unusual I've done, relating to the hp printer, is downloading the HP Printer Assistant and the HP Printer and Scan Doctor! I've checked all relative settings and nothing seems out of the ordinary or different.

Hi @ibgb
Another user recently posted what he/she tried to resolve this same issue. Perhaps it might work for you too;
I reset my top and bottom margins and test printed and scanned and it did not put out any blank sheets. - Source
If this doesn't resolve the issue, please try the following;
1. Touch the Windows key on the keyboard to get to the start screen, then without clicking anything type Devices and Printers, and tap or click the Devices and Printers icon.
2. Right click on the printer icon and click on printer properties.
3. Then click on Advance Tab, and click on the Separator Page tab.
4. A small windows open with the location of the file. Delete the path, click ok to save the settings.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Urgent: Oracle Reports : Blank Page Should print after each Group of record

Hi all,
I have a different kind of requirement, in my report I have 1 block and I want to generate a blank page after every group of records. This is because the printer is printing both side of the paper and we are giving multiple group at same time.
Cannot touch the printer setup since it is a common one. Anybody can help me in this for a fast and simple way ? "Maximum records per page" property for the repeating frame give the next group to a fresh page but there will not be a blank page in between.
Please help ..
Thanks,
Ani.

Thank you for your attention.
Empty frame with page break is not helping me since it will not hide the rest of the items which are outside the repeating frame. Like Report caption, Group Name, Page footer etc...
If I am using the empty frame, is there any way to hide all other items ?
Thanks,
Anish

LASERJET 1160 PRINTER RUNS A BLANK PAGE BETWEEN EVERY PRINTED PAGE AFTER UPGRADING TO WINDOWS 8.1

Laserjet 1160 printer runs a blank page between every printed page after upgrading to Windows 8.1

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printer just started feeding a blank page after some, but not all printed documents

Printer just started feeding a blank page after some, but not all printed documents

Hi @cam21 ,
I understand that you are having issues printing, after some documents you are getting blank pages. I would be happy to help you.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
What application are you printing from?
It may be a setting in the application.
Does this happen from all applications?
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
How is the printer connected? (USB/Ethernet/Wireless)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Double sided printing, adding blank page after two different groups

Post Author: adepper
CA Forum: General
I have created a report that is structured as such:
Group 1 - Based on formula, groups by type
Group 2 - Based on formula, groups by use
Group 3 - use (pulled directly from Database)
Group 4 - ID
I have the report printing an extra page after group 3. I used this formula in the Section Expert - New Page After
remainder(pagenumber,2)=0
I also use that formula to reset the page number
What I would like to do is print a second blank page if group 2 does not start on the top of the page, meaning I do not want either group 3 or group 2 to start on the back of a page, so that this report can be placed in a binder, with dividers.
I have group 3 giving me a blank page with no issues, it is just group 2.
Any help and/or suggestions would be appreciated. If I did not give enough details, I am sorry.
Thanks!

Post Author: adepper
CA Forum: General
After a lot of blood, sweat and tears, not to mention a lot of curse words directed at the computer, I was able to get this to work. Now I just have to do it for three groupings instead of two (deliver the impossible to your bosses, and they turn around and move the brass ring right out of reach again!)
In case anyone is interested in how I was able to manage this (I found many sites where people asked this question, but not one complete answer), this is what I did:
In the footer section:
Group 4 - ID (database field)
Group 3 - PrimeUse (database field)
    3a - Contains data
    3b - Contains data
    3c - New Page After, Keep Together, and Reset Page Number After are all checked. In the condition for Reset Page Number After I also have this formula:
    remainder(pagenumber,2)=0
    3d - New Page After, Keep Together, and Reset Page Number After are all checked. In the condition for New Page After I have this formula:
    remainder(pagenumber,2)=0
Group 2 - Suppressed
Group 1 - Grouped by Store Type -
    1a - Suppressed, New Page After and Keep Together are all checked.
    1b - New Page After and Keep Together are checked. In the condition for New Page After I have to following formula:
    remainder(totalpagecount,2)=1
If anyone sees any errors, or if you think you can get it so that I get another page blank, after Group 1, if the Group starts on an even numbered page, I would appreciate the help.
Thanks!

HP 3510 All In One only printing blank pages after cartridge replacement

Recently replaced my blank ink cartridge after supply level showed low, and printed output looked faded.
Using genuine HP product - check
Cartridge supply level good - check
Powered on and off twice - check
Installed, removed, re-installed cartidges - check
Good paper - check
Alignment prints blank page - does not print partial or low quality, just produces a blank page.
Printing from my computer, a word document, also produces a blank page - not parital - blank.
Was printing before the HP cartridge change.
Did I buy a bad HP cartridge?
Any help would be appreciated.

Forgot to mention that I am not getting an error message either, except when I go through the motions of scanning the (blank) alignment page. That error is related to the fact that it is blank though.
Thanks for any assistance.

Kodak printer printing blank pages after upgrading to OS X Yosemite

Since updating to OS X Yosemite last year, I have been having trouble printing to my Kodak Office Hero 6.1. Print message sends perfectly to printer but the page is just printed as a blank. The printer head moves as if it was printing but no ink comes out. I have done the following:
1. Changed printer cartridge
2. Reset printer and the WIFI network is prints through
3. Updated the software settings through Kodak
4. Removed and re-added print drivers through apple
I am at a loss to know what to do now. Any ideas?

This worked for me-
Do the following steps to address the issue:
Go to Spotlight, then enter Terminal and press Enter.
The terminal window/program opens.
Enter sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf' in the terminal.
Enter your system OS login password when prompted.
Note: The password you enter will not appear, which is normal. Be sure to enter the correct password.
Enter sudo launchctl stop org.cups.cupsdYour screen will look similar to the following:
Last login: Mon Nov 10 16:34:57 on console
Macintosh:~ lindaterry$ sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
Password:
Sorry, try again.
Password:
Macintosh:~ lindaterry$ sudo launchctl stop org.cups.cupsd
Macintosh:~ lindaterry$
Try to print again.
If the issue continues, contact us for further support.

HP 6510 printing only blank pages after changing print cartridges

Hi,
My HP 6510 is printing only blank pages after I installed new print ink cartridges. I tried cleaning the print heads, aligning the printer... which did result in some pages printing with a little color (but it seemed "off" to me). That said, when I try to print a regular document from my PC it only prints a blank page.
I can't seem to figure this one out on my own - please help!
Thanks!
Chloe

The document here may help resolve black not printing on your Photosmart 6510. Be sure the cartridges are vented as shown in solution two.
Is your printer still in warranty? You can check with HP's warranty tool here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp 932c printer sends a blank page after printing. Win7. suddenly started doing this.

Similar Messages

Maybe you are looking for