Hp 9500 printer configuration on solaris 10 on vmware server

hi,
i installed solaris 10 on vmware server when i am going to configure the network printer 9500 hp (its having print server that also i am giving in the print server properties ) , but still i am unable to give print out from staroffice application,
can you write me steps in details Please as soon as possible,
Thanks,
Zubair.

> Please, can somebody give me the way, step by step to
configure a DNS server on solaris 10. i want to have
the directories and files that it is necessary to
modify and the modification to have a domain name
"deptech.lan" with ip adress of the DNS
server 192.168.100.2.
>
> thankDo this in this way,
1. unconfig your system
# sys-unconfig
2. Then press " Y" after that it wil reboot..
3. Then it will start config.
4. you can see like that,
Network ( y/n)
Network Interfence ( acc. 2 ur NIC , e.g. rstl0 /nge0 etc..)
select it. If you have two NIC in your system. then you choose any one..
5. Enter your " Host name"
6. then system ip
7. Then some stpes wll appear, it shows,, DHCp, Enable Ipv6 etc.. select acc. 2 ur configartion.
8. Then it will appear ' name service"
then select " Dns"
9. Give your DNS server name
10 . enter " server ip "
then search domain ( enter acc. 2 ur config/ may leave blank)
N.B: for going next stages / contiues you have to use " F2" key..
then it will configured..
Let me know if its ok or for any problem..
Thanks
Partha

Similar Messages

VMWare Server and SBS2011 Essentials

Trying to configure SBS2011 Essentials on VMware Server (was told it can be done) first I notice there is only the option to install Win Server 2008 / R2 and lower operating systems, is it possible to install SBS2011 on VMWare Server? If not which VM platform is needed?

Welcome to the Community,
I assume you are aware of the fact that VMware Server is already out of support for more than a year!? (see http://www.vmware.com/support/policies/lifecycle/general/index.html) Anyway, SBS 2011 is based on Windows Server 2008 R2 so you may try to install it with the appropriate OS selection.
If this is intended for production use, I would suggest you consider to use another product (e.g. ESXi 5) if your hardware is supported (see VMware Compatibility Guide: System Search). Do you have other virtual machines too?
André

Error in vmware server 1.0.4 & solaris 10

After I add a scsi disk, then network can not work. Why ?
Error is:
Failed to plumb IPv4 interface(s): pcn0
Failed to configure IPv4 DHCP interface(s): pcn0
this is the VMX:
config.version = "8"
virtualHW.version = "4"
scsi0.present = "TRUE"
scsi0.virtualDev = "lsilogic"
memsize = "1024"
MemAllowAutoScaleDown = "FALSE"
ide0:0.present = "TRUE"
ide0:0.fileName = "Solaris 10 (experimental).vmdk"
ide1:0.present = "TRUE"
ide1:0.fileName = "G:\Software\Sun\Solaris 10 for X86\sol-10-u4-ga-x86-dvd.iso"
ide1:0.deviceType = "cdrom-image"
floppy0.fileName = "A:"
ethernet0.present = "TRUE"
ethernet0.virtualDev = "e1000"
sound.present = "TRUE"
sound.virtualDev = "es1371"
sound.fileName = "-1"
sound.autodetect = "TRUE"
displayName = "Solaris 10 (experimental)"
guestOS = "solaris10"
nvram = "Solaris 10 (experimental).nvram"
ide1:0.autodetect = "TRUE"
floppy0.startConnected = "FALSE"
sound.startConnected = "FALSE"
ide0:0.redo = ""
ethernet0.addressType = "generated"
uuid.location = "56 4d 1e dd 23 f8 b6 7f-90 e9 b2 f6 f3 d3 26 d8"
uuid.bios = "56 4d 1e dd 23 f8 b6 7f-90 e9 b2 f6 f3 d3 26 d8"
tools.remindInstall = "TRUE"
ethernet0.generatedAddress = "00:0c:29:d3:26:d8"
ethernet0.generatedAddressOffset = "0"
scsi1.present = "TRUE"
scsi1:0.present = "TRUE"
scsi1:0.fileName = "D:\Virtual Machines\Solaris\share\datadisk1.vmdk"
scsi1:0.mode = "independent-persistent"
scsi1.virtualDev = "lsilogic"
priority.grabbed = "normal"
priority.ungrabbed = "normal"
scsi1:0.redo = ""

I have faced a similar problem, but I was testing a lot of things simultaneously (not very smart obviously), of which was adding SCSI and IDE disks.
Anyway:
I am running VMware server 1.0.4 on Windows XP.
I have a Solaris 10 8/07 virtual machine installed.
The VM is NATing through the host os's network.
I have two network adapters (physically on my laptop), one wireless and one wired, I can have any combination of them being enabled or disabled according to where I am working, and sometimes I start the virtual machine with neither of them enabled.
When I installed the Solaris VM, the network interface was configured as pcn0. At some point (don't know exactly what i was testing then) pcn0 was no longer available and pcn1 suddenly appeared. Later on this happened again and pnc1 disappeared and I got pcn2.
As far as I can tell this happens when I start the VM with a different combination of NIC's enabled / disable , i.e. for some reason, having a different physical interface enabled causes Solaris in the VM to configure a different instance of the pcn interface.
I am not sure yet if this is really what is going on, but for now I am focusing on testing what is running on the vm rather than giving in to my technical cravings to get to the roots of this problem, so for a quick fix, just grep for pcn in /etc/path_to_inst, and try plumbing the instances you find there. The one that does not return an error is the one that is currently working.
Just change your hostname.pcnx or pcnx.dhcp file to reflect the correct instance number and do an "svcadm clear physical" this will get your network started and start all the dependent services.
Hope this helps.

How to avoid print configuration screen

Hi everybody,
I'm executing a program which has to print two smartforms, one followed by the other, but I don't want the printing configuration screen before printing each one, I want it only to appear in the first one and then inherit printing parameters in the next smartform and avoid the screen.
How can I do this? I think that is by using output_options parameter but I don't know exactly how.
Many thanks,
Cristina.

hi,
I understand that you have your own program that triggers both Smartforms, one after the other, right?
Try this:
In your program trigger the first smartform (and have the print config screen popup)
WITHIN that smartform you trigger the second Smartform and suppress the the config screen.
Since the output options are know at this point you can pass them to the second smartform.
I hope it helps,
regards,
Joris Bots

ORARRP doesn't print to a printer configured through TCP/IP.

Could any one using ORARRP pls. help ? I am pasting the TAR contents I opened with Oracle Support.
Oracle Support doesn't support ORARRP. They referred me back to discussion forum.
Thanks,
RK
Resolution History
22-MAY-02 19:25:05 GMT
Can you easily recover from, bypass or work around the problem? = NO
Does your system or application continue normally after the problem occurs? =
YES
Are the standard features of the system or application still available; is the
loss of service minor? = YES
### Problem Description: ###
I am using windows 2000. I found an article which said there is a new release
of ORARRP for windows 2000. Can I obtain the latest release of ORARRP.exe ?.
I am having trouble printing with ORARRP. I select the output file from the web
by clicking it. and it opens the printer dialog.. I hit O.K and nothing is sent
to the printer.
Need help.
### Upgrade or New Install?:###
Neither
### Error numbers/messages:###
no error messages.
###Log files faxed/emailed or uploaded ###
Uploaded
###Any workarounds ###
none
###Name & Version Details ###
none
### Were you able to complete this process previously? When? ###
no
### Can you duplicate the issue? What is the navigation path? ###
yes
###Is the problem in all environments? If not what's the difference?:###
Not Sure. Need to check with some one else who uses windows 2000.
###Any patches applied recently?:###
none
Contact me via : E-mail -> [email protected]
23-MAY-02 00:09:27 GMT
Issue needs to be addressed with Oracle Reports Developer. XFR->TOOLSREP
23-MAY-02 01:06:04 GMT
New info : Hi Oracle Support,
I found that the ORARRP works fine and submits report to the Printer if the
printer is defined through Novell Netware Network.
But if the same printer is defined through I.P address directly as a local
Printer it doesn't work. ( Add new port , Standard TCP/IP port method in
Windows 2000).
Does it give us any clue to solve this issue ?.
Pls. Help.
Thanks,
RK
23-MAY-02 13:19:58 GMT
Investigating this issue...
23-MAY-02 13:32:25 GMT
Hi,
My understanding is that you where trying to print using ORARRP utility on the web
Since you are trying on an muti-tiered server(that is web is 3-tier)
by default this report will be printed out to the default printer assigned to
the application server machine , NOT to the client machines default
printer.
For example,
Machine 1 - the application server machine
Machine 2 - the client machine
Machine 2 submits a request to run a report to the multi-tier server with
DESTYPE set to PRINTER; DESNAME is left blank.
Printing will be on the default printer of Machine 1(Application server)
and not on Machine 2(Client PC)
If I am wrong inmy understanding, please eloborate
Best rehards
Chandru
23-MAY-02 13:32:44 GMT
Email Update button has been pressed -- Sending email.
23-MAY-02 15:08:03 GMT
New info : A Big No. We are running the 10.7 version of Oracle applications and
there is no middle tier per se.
All we have done is to define a new printer called "LOCAL_PRINTER" and when
users select this printer the initiaization string which the Print command
sends to the printer before sending the file gets added to the output file and
the output file is stored in a directory which is accessible through a web
server.
Users invoke the browser and point to the website where the output files are
avaiable. and then click on their request ids. Since the extension of the file
is .rrpt the ORARRP utility brings the Printer dialog where we have select the
printer.
This setup was working sucessfully till so far. ( Past 1 year).
Now it suddenly didn't work for a user's printer which was connected to her PC.
Since I had windows 2000 on my laptop and I tried the same and found that the I
select a PC which is defined through I.P Address then it is not working. But
if I select the same printer defined through Novell Netware it is working.
Please let me know if you are getting the picture. if not may be we can do a
webex session or something like that.
Thanks,
RK
916-630-3508
23-MAY-02 15:51:40 GMT
Hi,
Sorry, I do not find any related notes on this issue
Possibly the PDF by name orarrp1.3.4.pdf in the ZIP file [downloadale at http://otn.oracle.com/sample_code/products/reports/files/Orarrp_1_3_4.zip] could show some pointers on this issue.
This PDF about this utility and is the only document I could find on this issue
ORARRP is a sample supllied "AS IS" to customers and is currently not supported by Oracle Support
Users facing any issues with this utility are encouraged to share their experiences in OTN forum at http://otn.oracle.com
This forum is being monitored by Product Management who can help customers as well as provide fixes for this utility
Please close the tar and post in OTN forum
Thanks
Chandru
23-MAY-02 15:51:51 GMT
Email Update button has been pressed -- Sending email.
23-MAY-02 10:24:13 : CHANGES MADE VIA MetaLink
NOT YET FORWARDED TO OUR INTERNAL SYSTEMS :
Closed by customer
Closing the TAR

Hi Radhakrishnan,
ORARRP doesn't actually do any printing itself. Via COM/Active-X, it calls the appropriate program that corresponds to the type of output, and then this program does the actual printing. For PDF, it calls Acrobat Reader to print the document. Acrobat Reader displays the printer dialog to let you choose which printer to use, and then when you click OK, Acrobat Reader prints the document and sends it to the printer.
I expect that you'll find that when you use Acrobat Reader yourself on this machine it has exactly the same problems with this particular printer configuration. If so, you'll need to contact Adobe for further assistance.
regards,
Stewart

How to printing oracle report by specific printer name on solaris?

When running reports
-http://host/reports/rwservlet?destype=PRINTER&desname=printername&desformat=dflt.prt&report=test.rdf&userid=test/test@TEST&MODE=CHARACTER
report with destype=printer desname=printername, the report fails with REP-50159 Executed successfully but there were some errors when distribute the output
if set default printer by add PRINTER=printername export PRINTER; in uiprint.txt
it can print to printer.
i found document id 394554.1 in metalink but it can't fix problem.
https://metalink.oracle.com/metalink/plsql/f?p=130:14:342229662272785964::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,394554.1,1,1,1,helvetica
To fix the problem, execute the following steps:
1. Take a backup of opmn.xml
2. Edit opmn.xml and include the path information of the new printer:
For In-process report server add the path information within <OC4J_BI_Forms>
Eg:
<process-type id="OC4J_BI_Forms" module-id="OC4J">
<environment>
<variable id="DISPLAY" value="localhost:0"/>
<variable id="LD_LIBRARY_PATH"
value="D:\Oracle\product\FRHome_1\lib32:D:\Oracle\product\FRHome_1\lib"/>
<variable id="PATH" value="//printserver;D:/Oracle/product/FRHome_1/bin;................./>
</environment>
Here //printserver is the network drive where is printer is installed.
For standalone report server add the path information within <reportservername>
Eg:
<ias-component id="standalonerepsvr01" status="enabled" id-matching="false">
<process-type id="ReportsServer" module-id="ReportsServices">
<process-set id="standalonerepsvr01" restart-on-death="true" numprocs="1">
<environment>
<variable id="DISPLAY" value="localhost:0"/>
<variable id="LD_LIBRARY_PATH"
value="D:\Oracle\product\FRHome_1\lib32:D:\Oracle\product\FRHome_1\lib"/>
<variable id="PATH" value="//printserver;D:/Oracle/product/FRHome_1/bin;........../>
</environment>
3. Reload opmn : opmnctl reload
4. Restart opmn: opmnctl stopall , opmnctl startall
5. Run the report with destype=printer and desname=newprintername
my config (solaris)
oracle application server release 2 (10.1.2.0.2)
i used axis printserver name is SZ_R02.
<process-type id="OC4J_BI_Forms" module-id="OC4J">
<environment>
<variable id="DISPLAY" value="localhost:0"/>
<variable id="LD_LIBRARY_PATH_64" value="/data/app/mid/lib:/data/app/mid/network/lib32:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib::/data/app/mid/jdk/jre/lib/sparcv9"/>
<variable id="LD_LIBRARY_PATH" value="/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib32:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib::/data/app/mid/jdk/jre/lib/sparc"/>
<variable id="PATH" value="/SZ_R02:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib32:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib::/data/app/mid/jdk/jre/lib/sparc"/>
</environment>
how to print to printer by specific printer name?
thank you very much
khun

if submit url with parameter
http://hostname:7778/reports/rwservlet?destype=PRINTER&desname=lpSZ_R02_2&report=sticker.out
error
REP-50159: Executed successfully but there were some errors when distribute the output
How to Solution?

SAP on SOLARIS on VMWare -- DELL ?

Friends, I noticed that Dell does not have hardware certified to run SAP on Solaris -> http://www.saponsolaris.com/hwlist.html
However I have a quest that requires SAP -> on Solaris -> on DELL
One of the solutions was virtualized Solaris and install SAP on Solaris: SAP -> on Solaris -> on VMWare -> on DELL
In the topic below there is a mention that SAP does not support this type of installation, but without any reference to any SAP Note:
ERP6 EHP4 SOLARIS 10 Sparc,Oracle 10g in a virtual envirn swap size requir
Do you know any case that could help me?
thank you

If I understand the license policy of Oracle Solaris properly, the only valid way of running Solaris entitled is on hardware you bought by Sun/Oracle.
There is no note because it is not supported. There are no Solaris specific VMWare tools available, there will be no integration in the monitoring becaues of that and hance it's not supported officially.
We had likewise problems and we will switch all Solaris boxes to Linux subsequently.
Markus

VMware Server 2.0.2 and Solaris 10 10/08 x86 doesn't install

Hi,
I'm having trouble installing Solaris 10 using Server 2.0.2. I need Solaris 10 for dev/testing purposes. I don't have a spare 64-bit machine to run the latest vSphere Hypervisor 5.1 so I thought I would try Server 2.0.2 since it co-exists with Windows and supports Solaris 10.
I have a Intel Core i5, 8GB, running Win 7 Home Premium 64-bit. I'm able to create a Virtual Machine in Web Access. Event log says the VM is powered on and I see some DVD disk access but Solaris never gets installed. I've tried using ISO image and DVD-ROM disc. Same results. Also tried creating 32-bit and 64-bit Solaris 10 installation. Nothing. I was under the assumption, OS installation would start once the VM was powered on.
Since Web Access doesn't show any major failures alerts, I'm assuming there isn't a hardware issue???
I've included the VMware log file for reference. Hopefully I'm not missing something obvious.
Thanks kindly for your help,

I figured it out. Gotta used a "supported" browser. Either Firefox 2 or 3. Or IE 6 or 7.
Things get outdated real fast. I'm on Firefox 19. The Web Access UI wasn't showing anything in Firefox 19 under the VMs. Screen wasn't garbled or messed up which threw me off, just blank.

Document on 10g RAC setup on solaris using vmware

Hi All,
I am planning to setup "Oracle 10g RAC setup on Solaris using vmware", but I am strucked up at installation of Soaris 10 in VMWare.
Can any body please help/provide me the document on Solaris 10 installation for RAC setup .
The main problems I am having during the SOlaris 10 setup is
1) Setting up the static public and private addresses required for RAC
2) Partitioning the disk space.
Thanks in advance,
Mahipal Reddy

Refer these,
http://www.scribd.com/doc/15650880/Install-Rac-on-Solaris-Vmware
http://www.disperu.com/using-vmware-server-install-10g-rac-on-solaris/
http://nayyares.blogspot.com/2008/11/step-by-step-rac-10g-r2-solaris-10.html
Thanks
Edited by: Cj on Dec 13, 2010 2:38 AM

Installation Of Solaris In VMware

Hi,
I have a query.
What is the advantages and disadvantages of running any operating system (for eg: SOLARIS) in VMWARE(virtual machine) running on other Operating System(for eg: Windows XP).

I would suggest that you simply lump / and /usr together into at least an 8-10GB space. This assumes that you are installing an entire distribution cluster (SUNWCall or SUNWCXall). I have built some security hardened loads that require < 2GB and I'm sure I could get the footprint smaller if I had to.
I don't recall the size of an entire distribution on x86, but thought it was around 5GB for Solaris 10 for combined root and /usr.
Cheers,

Is there any best practice for printer configuration for test environment?

My Oracle ebs test environment has a scheduled refresh period where it will be refreshed with production test data and configuration time to time for BA, Dev to work on their enhancement.
However, all the printer configurations are still pointing to production ones after refreshed, which means whenever there is a testing on-going, the doc / label / invoices will be printed to production printer.
May I know if there is a way to globally change all the printer setup for the test environment, so that nothing will be directly to production?... Please assist.
(currently, the only way is to change one by one and only if you are aware of it...)
In case your organization has any other strategy on this matter, pls share also... Thanks a lot.

user6775047 wrote:
My Oracle ebs test environment has a scheduled refresh period where it will be refreshed with production test data and configuration time to time for BA, Dev to work on their enhancement.
However, all the printer configurations are still pointing to production ones after refreshed, which means whenever there is a testing on-going, the doc / label / invoices will be printed to production printer.
May I know if there is a way to globally change all the printer setup for the test environment, so that nothing will be directly to production?... Please assist.
(currently, the only way is to change one by one and only if you are aware of it...)
In case your organization has any other strategy on this matter, pls share also... Thanks a lot.If you do not want to use same printers then you have to it to point to the (TEST/BA Printers) after you are done with Rapid Clone. Any new printers need to be added manually (just the same way you defined you PROD printers) -- Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
If you want to edit the configuration, you could use FNDLOAD to download printers definition from the source instance, update the ldt file and use FNDLOAD to upload printers definitions.
Is It Possible To Download/Upload Printer Definitions Using Fndload [ID 432616.1]
Tips About FNDLOAD [ID 735338.1]
Thanks,
Hussein

How to save the print configuration

Hello, in my business, employees need to print multiple documents per day.
But for these specific documents, they need to print with a size of 105%.
My question is how to save the print configuration because they need to remplace the size by 105% every time ...
Please help me
(Sorry for my bad english, i'm french)

it was here : http://www.hostingpics.net/viewer.php?id=684187301.jpg
this screen appear after i press File -> print
and i need to put 105% every time i want to print document, how to save this ?
edit : this is not in the printer configuration

Error when I generate a PDF file - Can't parse printer configuration file:

I am receiving an error "Can't parse printer configuration file: uiprint.txt" when try generate to PDF file. The pdf file is generated but when I open the forms builder and show canvas the same error appears and canvas is shown in crazy way.
My uiprint.txt has the follows:
REPORTS_TMP=/tmp; export REPORTS_TMP
REPORTS_NO_DUMMY_PRINTER=TRUE; export REPORTS_NO_DUMMY_PRINTER
REPORTS_TAGLIB_URI=/WEB-INF/lib/reports_tld.jar; export REPORTS_TAGLIB_URI
REPORTS_CLASSPATH=$ORACLE_HOME/reports/jlib/rwbuilder.jar:$ORACLE_HOME/reports/jlib/rwrun.jar:$ORACLE_HOME/jlib/zrclient.jar:$ORACLE_HOME/j2ee/home/oc4j.jar:$ORACLE_HOME/j2ee/home/lib/ojsp.jar;export REPORTS_CLASSPATH
TK60_UNKNOWN=$ORACLE_HOME/guicommon6/tk60/admin; export TK60_UNKNOWN
TK60_PPD=$ORACLE_HOME/guicommon6/tk60/admin/PPD; export TK60_PPD
LE_HOME/guicommon9/tk90/admin/AFM; export TK90_AFM
TK60_FONTALIAS=$ORACLE_HOME/guicommon6/tk60/admin; export TK60_FONTALIAS
PRINTER=testprint;export PRINTER
TK2_PRINTER=echo;export TK2_PRINTER
testprint:PostScript:2:HP printer:hp4si3_1.ppd
Can someone help me?
Thanks

Hello,
The file uiprint.txt must not contain environment variables definitions.
Put the lines :
REPORTS_TMP=/tmp; export REPORTS_TMP
REPORTS_NO_DUMMY_PRINTER=TRUE; export REPORTS_NO_DUMMY_PRINTER
REPORTS_TAGLIB_URI=/WEB-INF/lib/reports_tld.jar; export REPORTS_TAGLIB_URI
REPORTS_CLASSPATH=$ORACLE_HOME/reports/jlib/rwbuilder.jar:$ORACLE_HOME/reports/jlib/rwrun.jar:$ORACLE_HOME/jlib/zrclient.jar:$ORACLE_HOME/j2ee/home/oc4j.jar:$ORACLE_HOME/j2ee/home/lib/ojsp.jar;export REPORTS_CLASSPATH
TK60_UNKNOWN=$ORACLE_HOME/guicommon6/tk60/admin; export TK60_UNKNOWN
TK60_PPD=$ORACLE_HOME/guicommon6/tk60/admin/PPD; export TK60_PPD
LE_HOME/guicommon9/tk90/admin/AFM; export TK90_AFM
TK60_FONTALIAS=$ORACLE_HOME/guicommon6/tk60/admin; export TK60_FONTALIAS
PRINTER=testprint;export PRINTER
TK2_PRINTER=echo;export TK2_PRINTER
in the file reports.sh
and keep only
testprint:PostScript:2:HP printer:hp4si3_1.ppd
in uiprint.txt
Regards

Print Configuration Dialog Box

Hello all,
I want to enable the print configuration dialog box pop up when a button is clicked in vi.
This is standard windows printer configuration dialog box which pops up when any file (xls,txt etc.)
is tried printing.Any suggestions please ?
Also i have attached the standard windows print dialog box, just incase.
Thanks in advance,
Nalin
Attachments:
print.JPG ‏33 KB

In general use a property node with nothing attached to it in LabVIEW with the property Printing >> Default Printer or Printing >> Avalaible Printers to return the printers configured with Windows. One of these string items can be wired into the printer input of the report generation Print Report VI to select a printer.
In regards to the Microsoft Common Dialog 6.0 ActiveX controls, the printer selection from the dialog seems to be determined by the hDC output, which stands for hardware device context. If you modify the demo posted above to send in the appropriate flag value, either an informational or a direct hardware device context handle is returned in the ICommon property hDC. Input the flag value 512 to the ICommonDialog property Flags to return an hardware device context handle from the hDC property, or 1024 to return an informational device context.
More information about how to extract any meaningful information from this I32 number can doubtlessly be found at msdn.com, but I'm not sure personally how to do it. Specifically, here are a few posts to start your search at:
Using the Print Dialog Box
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/vbcon98/html/vbconusingprintdialogb...
Common DialogControl Constants
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cmdlg98/html/vbidxCommonDialogContr...
Alternatively, consider avoiding the Common Dialog Control calling a dll that will directly return the selected printer name from a dialog:
http://support.microsoft.com/default.aspx?scid=kb;en-us;322710
Hope this helps!
Jarrod S.
National Instruments

Printer Configuration for PDF Display in New NWBC Window

please am implementing SAP Note 1069540 -Printer Configuration for PDF Display in New NWBC Window
and when i finished the configuration i the pdf tab was still not created..
i decided to trace the error and i noticed that in service /sap/bc/webdynpro/sap/WDK_SPOOL_TO_PDF
when i right click and test service i get an error
Client error
Host name lookup for 'dv1sap.mis.com' failed
guess thats why my pdf tab was not created in my NWBC..
can any one help..please...ASAP

do you have maintained the host and ip adress in the hosts file of your system
It seems it is not able to recognize the host
just define an entry and then try
Rohit

Hp 9500 printer configuration on solaris 10 on vmware server

Similar Messages

Maybe you are looking for