Hp a1230n reboots and vertical lines problem

Hi
I'm completely new so this may even be in the wrong place but yeah basically what it says in the title. It keeps rebooting on its own. Sometimes the screen will only show vertical lines that are the same color as what was on the screen. I've scanned it for viruses with first Macfee and then Avast and they've said its clear, and it runs fine other than the rebooting and lines problem.
Thank You

Hello mnstrzero00,
You’re having problem with the computer rebooting.
Your problem could be software problem of hardware.
How long has this problem been happening?
If it has not been happening for very long you might just try a system restore back to before the problem started. This should correct the problem without affecting any of your files.
Here is a link to do a restore.
Before the restore run the following command in command prompt.   SFC /scannow.
Click start -> click run -> type CMD -> hit enter.
This will check system files and correct them if it can.
Also to make sure that it is not hardware.
Turn off the computer and the n turn back on, at startup tap the F2 and run hardware diagnostics.
Let me know if this helps.

Similar Messages

  • Hello' I am having an issue with my iPhone 5 display. 2 days before i've noticed some horizontal and vertical lines on the display. Minor but noticeable. Specially in dark wallpapers and on full brightness. Is it normal?? Please Help!!!

    Hello' I am having an issue with my iPhone 5 display. 2 days before i've noticed some horizontal and vertical lines on the display. Minor but noticeable. Specially in dark wallpapers and on full brightness. Is it normal?? Is this a software bug or Hardware problem?? Please Help!!!

    Hello,
    No, it is not normal. Follow this article:
    http://support.apple.com/kb/ht1414
    If this doesnt solve the issue your iPhone will need service.
    Burcu

  • Satellite 3000 screen vertical line problem

    my laptop is Satellite 3000 , it got vertical line problem now, i wanna use a outside CRT screen to replace the current damaged LED screen.
    I have tried to use FN-F5 swap key, but it is still doesn't work, i tried to log in the system to check it, (the system (windows xp) is normal), but i can't see anything because the screen is black, it won't get in the system even if i connected it in to the LAN, because the laptop network function configuration is not allow connect with internet,( i did ghost before it completely damaged), the question is :
    1, do i need to configure something so as to it can use outside screen in windows XP system? or just use FN-F5 swap key?
    2, how will i do next step if i wanna use the outside screen ?
    thx a lot

    Hello
    If the notebook is preinstalled with all Toshiba designed tools and utilities FN+F5 key combination should work. Of course the external monitor should be connected properly.
    If you are missing some tools FN+F5 key combination will not work.
    What I want to know is what happens exactly when you use FN+F5 key combination? Stays the LCD screen black or switch to the right picture again? As far as I know if you use FN+F5 key combination and LCD on the notebook stays black that means the signal is send to external device but if the monitor is not connected properly or there is some contact problem you will not see the content on external monitor.
    Believe me it is not easy to say what is wrong there but if possible try to test it with different monitors. Satellite 3000 is pretty old notebook model and maybe is RGB port defective.

  • One of first versions of macbook air with black horizontal lines on bottom one third of screen and vertical line also one third of left side of screen

    one of first versions of macbook air with black horizontal lines on bottom one third of screen and vertical line also one third of left side of screen

    Hi
    I've recently notice I have a thin black line in my screen.. I went to Apple store and was told it’s a hardware problem (400$+ to fix as no warranty).
    This is the second time I’m having hardware screen issues with a Macbook Air (last time it was 3 months after I bought it, and it was replaced with this one)
    Looks like the Macbook Air screens are very problematic!  Anyone experience something like that?
    Thanks,
    Eyal.

  • Pdf files print with horizontal and vertical lines

    All of a sudden, today, when I print pdf files, they print with horizontal and vertical lines.  I thaught it was the computer or printer. So I printed from another computer on the network, and printed to a different printer with the same result.  It is not just that one pdf file either, I have tried multiple files.  HELP.  Does anyone have any ideas?

    It is not clear how you are creating the files. It appears that they were created by Distiller from PS files that were created in some way. I also noted that you are using AA8.1.0. You may want to try to update (do all the updates in order) as a possible fix. It may be in the creation process also. Several packages will split large graphics into parts and create the image. I think this is a characteristic of OFFICE 2007 (docx) files - but I am not sure yet. Tell us how you created the files - step by step, including the scan.
    If you have the original documents, why not simply print to the Adobe PDF printer. The result would be smaller and a lot cleaner.

  • Table data needs to be displayed with horizontal and vertical lines

    Hi,
    I need to display the data of the table in the SAP script which is having both horiziontal and vertival lines.
    the out put needs to looks as it in Excel...where there are multiple records with 5 fixed coulmns each seprated from one another by horizonalt and vertical lines..
    Can you let me know how to proceed in SCRIPT ,,,, where the number of records might vary ..and also ..it might continue to second page..
    Regards
    Senthil

    well it is possible but quite tricky.
    All you got in SAP-SCRIPT to achieve this is the BOX-Statement.
    The BOX statement works with variables for XPOS, YPOS, WIDTH and HEIGHT. what you need to do is:
    - calculate those variables during runtime
    - add box-statements with those variables.
    to calculate those variables you need to count used lines and so on. i hope i showed you a way, rest is a lil brainwork then.
    regards

  • Dyanamic table is SAP Script with horizontal and vertical lines

    Hi,
    I need to display the data of the table in the SAP script which is having both horiziontal and vertival lines.
    the out put needs to looks as it in Excel...where there are multiple records with 5 fixed coulmns each seprated from one another by horizonalt and vertical lines..
    I thinking about useing the Box with XPOS and YPOS who value changes dynamicaaly..
    But again as the number of pages might be more than one..i think there will issues,
    Can you  let me know how to proceed in SCRIPT ,,,, where the number of records might vary ..and also ..it might continue to second page..
    Regards
    Senthil

    well it is possible but quite tricky.
    All you got in SAP-SCRIPT to achieve this is the BOX-Statement.
    The BOX statement works with variables for XPOS, YPOS, WIDTH and HEIGHT. what you need to do is:
    - calculate those variables during runtime
    - add box-statements with those variables.
    to calculate those variables you need to count used lines and so on. i hope i showed you a way, rest is a lil brainwork then.
    regards

  • CRXIR2 - A chart with horizontal and vertical lines?

    Good morning,
    Is it possible to create a chart with horizontal and vertical lines?
    I have a chart where the Y-Axis show the percentage and the X-Axis shows a timeline.
    The horizontal line shows the percentage for the points in time.
    Now I would like to mark some special points in time on the X-Axis with a straight vertical line.
    Is there a way to do that?
    Thank you very much in advance
    Christoph

    Hello Usama,
    unfortunatelly I couldn't find that that feature in the basic chart features.
    Also the webpage www.3DGraphics.com doesn't exist and I had no luck to google for 3DGraphics.
    It's a little strange, that it seems to be possible to draw one additional horizontal line with the basic features, but no additional vertical line.
    for example.
    If the main chart would be y=3x+1
    It seems to be possible to draw e.g. y=5
    But I see no chance to draw x=5
    In addition, to make it a little more complicated, I would need to have that dynamically, based on the values of a sql-statement.
    thx
    Christoph

  • Can someone help me with my 27" iMac's Gray screen with 5 Pink Vertical Line Problem?

    Hi there,
    I'm new to the forums, but I have a serious problem with my nearly 4 year old iMac 27" model.
    I was using my iMac one evening and then suddenly everything displayed on the screen gets immediately pushed to the left of the computer screen. Then after a minute, my screen turns a solid gray, displaying no dock, no header bar, no options, and the keyboard and mouse suddenly disconnect.
    When I turned back on my computer, it seemed to boot up perfectly normal. The normal gray start-up screen displays:
    Then it displays the Apple logo and begins to spin the loading circle icon below it. But this time it adds 5 vertical pink lines down the screen from left to right. They stay in place the entire time:
    And then when the login screen finishes loading, instead of bringing up my Account and my Password text box, it displays just a solid gray screen with the same 5 pink vertical lines on it, as shown below:
    I've let it set for a half hour and nothing changes. During this time the keyboard and mouse seem to be disconnected, nothing seems to work with the screen or the computer itself. I hold the on/off button on the rear, turning it off and then on again. The same process happens with the boot up, the Apple logo appears, then the spinning loading icon below it, and then the vertical bars appear and the Apple logo and spinning icon disappear.
    Is this a problem with the screen that an external monitor hooked up to it might fix, or is it a graphics card problem? I didn't buy the extended warranty package for the computer and it's roughly 3 1/2 years old.
    Any idea what might cause this and how it could be fixed in the cheapest way possible?

    I have the same problem since yesterday evening.
    My google research found this:
    iMac (27-inch): AMD Radeon 6970M Video Card Replacement Program - Apple Support
    Maybe this is our problem. My iMac fits into this category.

  • IMac won't go past apple logo screen and vertical lines on display

    I have an old white iMac that won't boot. When booting up the screen has vertical purple lines and I can see the Apple logo. The little "dial" just spins and spins. Does anyone know how to fix this? thank you for any and all help.

    The vertical lines are indicative of a hardware problem. It is possible (likely) that this is also related to the inability to start up as well. It's almost impossible to diagnose and explain repairing hardware in these forums, so I think it best if you take the computer to a repair shop that is familiar with Macintoshes.

  • 30" HD Apple Monitor leaving ghost images and vertical lines

    I have a Mac Pro Gen 1 with ati 5770 HD video card runing Snow Leopard. My 30" HD Apple Monitor will flicker and leave verticle lines and perstent ghost images from closed windows, even during shut down.  Some times it will flicker back to normal, but then it will flicker back to leaving verticle lines and ghost images.  I have tried using a different video card, same issue, nothing changes.  I have tried instaling new video drivers and using old ones. I have been using the ati 5770 HD for months now without any issues.  How do I fix this?

    If two different cards produce the same results then I would think its your 30" display which is failing.
    Update:
    I just noticed in your sig you are using 10.6.8.  There are some threads about video problems (flickering, not sure about vertical lines) with 10.6.8 (google "10.6.8 flickering site:discussions.apple.com").  So if you boot from your installer dvd which presumably has an older version of OSX (10.6.4 maybe?) do you still see the display problems?
    Another thought - would an smc and pram reset affect anything?  You might give it a try too.

  • Reply opens with indent and vertical lines. How to avoid them for good.

    In TB when I click reply, a message that I am replying to opens with vertical blue lines on the left and right (indent vertical lines) and with a heading like this:
    On 05/12/14 11:21 AM, [email protected] wrote:
    Is there an easy setup to avoid getting the lines forever and always get senders' headers in my replies like this:
    From:
    To:
    Sent:
    Subject:
    I honestly spent almost 3 hrs but found some rather complicated and uncertain solutions. In my mind it should be as simple as putting or removing a check mark in some set up tabs.
    if you can help, pls give detailed step-by-step info so even I can manage to do it.
    thx a lot

    Matt. thank you
    you are right, those vertical lines have disappeared but I got
    >
    >
    >
    instead.
    Is there an easy setup to avoid getting the lines and/or > > on each line of recipient email forever and always get full senders' headers in my replies like this:
    From:
    To:
    Sent:
    Subject:
    I was a happy user of outlook express, but now I got a new PC with windows 8 which does not support OE.
    I am a Thunderbird newbie and it is extremely strange and frustrating.
    Why not to offer all possible choices, options, and settings to make it adaptable and easy for each user with particular needs or preferences?
    I would gladly pay $50 or $100 instead of wasting 20 or 30 hours trying to find a way to bypass weird (to me) restrictions or missing settings.
    If OE resolved the problems, it should be possible to resolve for Thunderbird creators too.
    I am grateful anyway for the free app but I may need to waste even more days experimenting with other email clients.
    Trying to solve the problems I found that other Thunderbird users have been looking for the same solutions on the internet for over 8 years or so!!!
    Another huge problem of the TB is difficulty of getting a full HTML source, editing it and easily switching to text mode back and forth.
    And finally why not make every piece of text in any spot of the entire TB copy-able (let us copy any words or text anywhere in the TB and then paste it to a message). For example I can set up and see all headers ( view ... headers..... all ) but I can not copy/paste them into the message from which they were removed (why?).
    If Thunderbird creators ever read this, here is an offer or kind request. Pls create a better Thunderbird version with features and options given above, consult other users, search the Internet to accommodate a few wishes of many others. And offer a paid version of the Thunderbird. I think hundreds of thousands of unhappy users would buy a better mousetrap, or in this case, a better Thunderbird. The news will spread like a thunder all over ....
    It is a win-win-win opportunity to make everybody happy, cut wasted time, improve experience and satisfaction, and make $$$$$$$ at the same time!

  • Matrix report vertical line problem

    Development tool:
    Report Builder 11.1.2.2.0 (64-bit) on Windows 7
    Solaris app server with the following software versions:
    Oracle Forms and Reports 11g 11.1.2.2.0
    FMW is 11.1.1.7
    WLS is 10.3.6.0.8
    This is a report with a matrix.  The rows across have multiple fields and some of those fields may wrap depending on the amount of data in an individual field.  The matrix portion contains a single data item that does not wrap (basically just a single word status with some conditionally color formatting).  I have added a vertical line to the matrix item so there will be grid lines between each column.  All the frames are set to vertical-expand and horizontal-fixed.  I have also tried setting all the frames to vertical-variable and horizontal-fixed.  The problem is the vertical line does not expand when the data items in the across row cause a wrap and expand the height of the row vertically.  I've tried setting the vertical line to stretch with the same frame that encloses the across rows.  When I do this the vertical line disappears.  As soon as I set any value in stretch with frame the line stops showing.  I've tried all the combinations I can think of for printing on first, last, all and base printing on anchoring or enclosing and nothing works.  The line will only show if I leave the stretch with frame as null but it looks terrible when it is the height of one row but the actually row of data across may be a larger size due to field wrapping.
    Any suggestions?

    You will need to include an additional column of your date column to your SQL statement.
    e.g Your original column - to_char(your_date_column,'Month') "Months Name".
    Add a new column - to_char(your_date_column,'MM') "Sort Column".
    In the Matrix Row, include this new column field also. In the Data Model, move this new column field to the top. Remove the Break Order property to NONE for your original date field (Months Name).

  • Horzontal and Vertical Lines won't get thinner then 1pt

    I've been working with illustrator for years and never came across this problem. If I make perfectly horizontal or vertical line I can't get line weight lower then 1pt. If I rotate the line just by 0.1 degrees then I can make the like less then 1pt. When I rotate the lane back to perfect 0 or 90 degrees then it automatically changes the line weight back to 1pt. Has any one else had this problem?

    Wow, I was messing with this problem for hours and didn't think of that. Thank you

  • Vertical lines - problem on new macs?

    I have about a 4  year old iMac. In this past year colored vertical lines started appearing on the screen, and they kept multiplying. I'm looking to buy a macbook or a macbook pro but I am worried that it will have the same problems. Has this issue been resolved?

    Never had the problem on any of my Mac laptops.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Maybe you are looking for