HP Advisor Dock - Customize Width and Scroll no longer working.

Hi there,
I've seen quite a few posts about not liking the Advisor Dock because it takes up space but I on the other hand quite like it. I put a lot of my shortcuts and icons there because it saves space and I could scroll between different icons just by swiping.
Without going into too much detail, my HP advisor just updated itself and now the slide to scroll feature doesn't work. it just picks up an icon and drags it.
Is there any way I can reenable this ? is there a config file somewhere?
I noticed they changed the size of the bar as well, possibly to fit their new lines of products but I'd like to resize it back to the way it was also.
Can you help?

Hi eg1978
Welcome to the HP Forums! I see that you are having issues with your two finger scrolling. I have a couple of things for you to try. This HP document Using and Configuring the TouchPad has a section on Turning individual gestures off and on and make sure that the two finger scrolling is enabled. If that does work then reinstall your Synaptics TouchPad Driver.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

  • Why does the mouse scroll no longer work in Firefox 4?

    I upgraded to Firefox 4 and suddenly my mouse scroll no longer works. It works fine for other programs and IE also Chrome, just not Firefox 4. How do I fix this? If this cannot be fixed, how can resort back to the old version?

    Spoke too soon. It worked fine for 10 minutes then died again. Closed and re-opened Firefox and it's working again. If this keeps up I will end up back with Chrome or IE. Way too inconvenient for me to stay with a browser and lose this functionality.

  • Hello! I have an older 20G ipod where the "circle" to scroll no longer works! any suggestions??

    Hello! I have an older 20G ipod where the "circle" to scroll no longer works! any suggestions??

    Considering the age of the iPod, it's likely been through quite a bit of useage and needs to be replaced.  There really isn't much else you can do to troubleshoot this issue.
    If you would like to have it repaired, there are several 3rd party repair companies out there who can do the job at a pretty decent price.
    B-rock

  • I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result

    I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result

    What OS version? What's the exact error? Exactly when does the error occur? What previous versions? What is on the screen when the error displays? Does Photoshop get fully open?
    Try opening Photoshop holding down Shift key immediately to turn off plug-ins. Lots of good suggestions here: Photoshop: Basic Troubleshooting steps to fix most issues

  • I have downloaded the most recent version of Iphoto and it no longer works period. I lost all photos, and the app crashes every time I try to open it. How can this be fixed?

    I have downloaded the most recent version of Iphoto and it no longer works period. I lost all photos, and the app crashes every time I try to open it. How can this be fixed?

    Post the first 50 lines only of the crash report
    Regards
    TD 

  • Divx and other media related plugins always crash and/or no longer work, please help

    Why is nothing of divx seems to work anymore? Every time i try to watch a video online using a divx site or site that uses a divx player, i get the message
    "divx plus web player pluging has cashed, send crash report"
    I send it - then am offered the option to reload the page once reloaded a press play the player then says connecting and then crashes again!!!
    FF this is ridiculas!!
    None of the divx plugins are recognised anymore and the divx web player add on is marked as incompatible, and there is not an option to enable it! When i click on the '''bold text'''more '''bold text'''option all that apears is the link to website where you download the exact same up to date version that you already have.
    im using windows vista home basic 32-bit operating system, & the new version of firefox.
    Its really annoying that these extensions and plugins no longer work crash and/or are no longer recognised espcially considering firefox insisted we upgrade for security issue etc and that 3.6 wont be kept up to date any more, I want reinstall the 3.6 version but am worried about security issues now.
    will the divx plugin and addon/extension be added to this new version anytime soon if not what can i do to enable me to watch videos without the plugin crashing ? (i have updated all the pluggins but the problem still occurs) ?

    I am having the same problems as well. Every time I turned around there was a new version of Firefox 8.0. Prior to the constant updating of Firefox I was able to watch movies from Stagevu and Veehd and now because of the new Firefox I cannot watch any movies. I also tried the VLC plugin and that constantly crashes as well as the DivX Web Player. I read so many complaints and no one from Firefox or any of the other browser is giving any of their constituents or customers whatever you want to call us any solutions to the problem and I am beginning to get a little frustrated. I have tried all of the other browsers like the Internet Explorer and Google Chrome and I still come up with the same problem.

  • Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshpp onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a p

    Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshop onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a password... any ideas how to get it working again?

    You can never, never migrate an installed copy of PSE. It's just too complex and you can't get to all the bits and bobs.
    First you will have to download and run this:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    which will not seem to do anything, but is necessary to break the links within PSE so that you can pitch the bits manually. Then you will have to go around, not only to applications, but also to your username>library>preferences and most importantly to the library at the top level of your hard drive>application support>adobe, and remove everything you can find. Spotlight will not help with this kind of search, so don't try that.
    Then you can install PSE from scratch.

  • Recently bought a new HDD, and encrypted it, and it no longer works on any machine, help?

    Recently bought a new HDD, and encryped it and it no longer works...
    Does anyone have any idea how or why?
    I can't seem to press anything except repair and verify...

    I followed what it said on another one of these discussion forums, by going onto the disk and changing it to encrypted, created a password then pressed erase, and it no longer will open at all, even on normal windows
    Sean

  • I recently updated my iPhone to the new iOS and it no longer works with my inbuilt car bluetooth. Is it possible to restore to my previous iOS system?

    I recently updated my iPhone to the new iOS and it no longer works with my inbuilt car bluetooth. Is it possible to restore to my previous iOS system?

    Delete the pairing and then re-pair the devices.
    There are no supported methods to downgrade the iOS.

  • After using my iPod classic in my infinity G35 a few weeks ago, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But wont work anywhere now

    After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But won't work anywhere now.  I tried re-setting but has not worked.  Any ideas would be appreciated.

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • Keyboard and mouse no longer work when booting into Rhapsody

    I still have a bootable partition with the last release of Rhapsody (aka Mac OS X Server) on my Power Mac G4 but it's been a while (years!) since I actually booted it up. The G4 also has bootable partitions with Mac OS X 10.2, 10.3 and 10.4 (and is in daily use running 10.4.11).
    I used to boot into Rhapsody occasionally, mostly for interest's sake, occasionally to test Unix software on legacy systems; I haven't tried to do so since installing 10.4 until now.
    When I booted up from the Rhapsody partition today, all went well -- the system started up fine, and the login screen appeared -- but the keyboard and mouse no longer work. I even got out the original keyboard and mouse that came with the G4, with no luck.
    I assume that recent firmware updates have bypassed support for Rhapsody. I guess I'm not surprised -- it was a developer-only release, after all. But has anyone a solution?

    Adding to the above: I also tried plugging in an Microsoft USB keyboard at the point when Windows freezes at the Windows log-in screen. The keyboard is not recognized and the only way I can leave this screen is to power-off the computer.

  • I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions?

    I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions and not have to pay to have the entire main board replaced. Preferably something under $100.

    I don't think you're likely to find a set of external speakers that come with a microphone and plug directly into a USB port. There are USB audio cards that look like tiny flash drives but have microphone and headphone ports in them, to which you can connect a typical two-plug Windows PC headset with a microphone, or else you can connect external speakers and a stand-alone microphone. Those adapters typically cost under $10. I don't know anything about the quality of sound that can be expected from them.
    I have a Griffin iMic, which is much the same idea but larger, a bit more expensive (retail~$40), and perhaps delivers somewhat better sound quality (I hope so, but I don't know because I've never had occasion to try one of the little ones).
    http://www.google.com/products/catalog?oe=UTF-8&hl=en&client=safari&q=usb+sound+ card&um=1&ie=UTF-8&tbm=shop&cid=9618463009759678039&sa=X&ei=tgQoT5zYOMfZ0QHkiICw Ag&ved=0CHcQ8gIwAQ
    http://compare.ebay.com/like/320779457703?var=lv&ltyp=AllFixedPriceItemTypes&var =sbar

  • I have upgraded to ios5 and Facetime no longer works.  I have tried turning off Facetime under settings and back on, but it still does not work.

    I have upgraded to ios5 and Facetime no longer works.  I have tried turning it off under Settings and then back on, but it still doesn't work. The symptoms are the same as what I read but the solution that has worked for some has not worked for me.

    Hi,
    Try restoring your iPad.
    If not speak to someone at the genius bar in Apple

  • After updating to iOS 8.2 on the iPhone 4S, iMessage and FaceTime no longer work properly.

    After updating to iOS 8.2 on the iPhone 4S, iMessage and FaceTime no longer work properly. constant hovering and disconnect from the service.
    Also, I noticed that going to the settings section is disabled service "Find iPhone".
    To get to the point tinctures "Messages" and "FaceTime" takes a few minutes.

    Hello Greg,
    Welcome to Apple Support Communities.
    This article should explain why the Volume slider isn't always visible on your iPhone 4s, and it also provideds tips that can help you resolve the issue.
    If you don't see the iPhone Volume slider - Apple Support
    Take care,
    -Jason

  • I need an application that will turn off my iPhone on the home screen just by a one click since my power button has sank and is no longer working--anyone have ideas?? I don't like having to use assistive touch and hit three buttons to lock my screen

    I need an application that will turn off my iPhone on the home screen just by a one click since my power button has sank and is no longer working--anyone have ideas?? I don't like having to use assistive touch and hit three buttons to lock my screen

    No such app exisits or can exist.  Apple doesn't allow 3rd party apps to access core functions of the phone.  Time to get your phone replaced or repaired if assistive touch doesn't needs your needs.

Maybe you are looking for

  • How do I link a new printer to my MacBook pro

    I would like to add a kodak esp series 5250 to my MacBook Pro via WiFi. How do I do it?

  • How can i read the text files and buffer the data in Vector?

    hi. I have been running into this problem for days, but with no luck and losing right direction. The problem is : I am trying to read a text file and buffer the data into a Queue for each user. the sample text file is as below:( 1st column is timesta

  • Can't play songs on iPod 80Gb Classic.

    Newbie to iPod. Former PC/Windows 2nd level support officer. Have brand new iPod bought duty free. Tried to load iTunes, but couldn't. Error message "The installer encountered errors before iTunes could be configured." It goes on to tell me to try la

  • Display Mirroring Problem

    I am running OSX 10.6.8 on a 27" iMac. I have my HDTV connected via the Mini DisplayPort. The only way I have been able to use my TV as a monitor (e.g., to play a movie on the iMac and watch it on the TV) is to mirror the displays. The problem with t

  • STOP is shown as obselete -- any alternate

    Hi all, I have STOP used in my code which is shown as an obsolete Error during Extended Syntax Check in ECC 6.0. Can any one tell me if we have an alternate. Surya Kiran.