HP AiO on iOS7 document capture not working with iPad2?

Has anyone else found that the Document Capture does not work with the latest version of HP AiO Remote on iOS7? The app grumbles about "The document capture feature is only available if the camera on your iPad is over 5 megapixels" - any solutions to this problem as we have about 95 iPads out in the business that need to use this function regularly

Hi VijayJois,
I understand that you are getting an error message when trying to use the capture feature in HP's AiO Remote app.
The capture feature in the most recent version of the app will give the error message that you are seeing. A work around to this is to take a photo instead of using capture. The photo is now available in the AiO app in your camera roll to send to the printer, or send via email.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

Image Capture not working with Canon LiDE 500F

Image Capture version 6.0.424 and CanoScan LiDE 500F 11.2.5.0 does not work properly.
Regardless the resolution, the resulted file has a very small size.
As a test I scanned a 9x20cm document at different resolutions and for all resulted files 'Get Info' reported small dimensions: 69x147 pixels. It is interesting that the size of the file varies with resolution, but when opened in Preview or Acrobat Reader, the small size is used.
As for other reports, CanoScan Toolbox works properly.
Regards,
Liviu

Hello Liviu,
There has been a couple of posts regarding the same issue with Image Capture. Have a look at this one for example.
http://discussions.apple.com/watches!add.jspa?forumID=1344&threadID=2272250
As I stated in this thread, I do not have this problem with Image Capture and my LiDE 200 or my MP980 AIO. So there must be something with the drivers used by these older model of Canon scanners when using Image Capture.
I haven't seen anyone provide a solution as yet so you may need to escalate this to Canon if you have a need to use Image Capture.
Pahu

"Restore last view settings when reopening documents" option not working with all documents

Said option (found under Edit/Preferences, category Documents), which works like an automatic bookmark in that it takes you back to the same place you were at when you last closed a document, is very useful, but apparently doesn't work with *all* documents.
- Does anyone know what determines whether a given document works with this option or not?
- Is this by design or a bug? A matter of PDF format version?
- Is there a way to work around the problem?
I've compared two documents, only one of which works with the option, to determine what the relevant difference may be, and found two suspects (under File/Properties): the PDF version (1.5 in the document that works, 1.4 in the one that doesn't), and 'Fast Web View' ('yes' in the document that works, 'no' in the one that doesn't).
Thanks,
Michael

This seems to be a problem with some PDF files.
Suggested workaround: If the PDF you have allows "Save As", then try save-as to a new file. The "Restore last view settings when reopening documents" option should then work as expected (in the new file).
(Original post: Restore last view setting not working in version XI)

Camera connection kit not working with ipad2

I have had no problems using my camera connection kit, and have downloaded plenty of pics and films, but it now seems that since I have updated to recent IOS it now no longer works and just comes up with the 'this accessory is not supported by ipad' message.
Anyone got any ideas? I have tried several SD cards and several cameras, so it is a problem with the ipad itself by the looks of it. I have tried a soft reset, turned on/off etc.
Many thanks in advance.

I have a 5 in 1 (not Apple) connection kit and like most others was pulling what little hair I have out trying to use the SD card reader on my IPAD 3 (probably the same with the Ipad 2), it simply does not work since the recent software upgrades. However I have just discovered that my camera USB connection lead DOES work when connected to the USB socket of the 5 in 1 connector. You will need to move the little black switch on the connector to the USB position. Once connected it shows an import icon which then allows scroilling through every photo on the camera. I can now import selective or all photos and it saves spending out £25 plus on an 'official' connector. Hope this helps.

Wireless Keyboard not working with iPad2

I've already wasted way too much time on a Apple product that has changed my mind about the company. I jumped through all of the necessary hoops to engage my wireless keyboard with my iPad2 but the keyboard will not type a single word. It says it's connected but it's not working. I got it to type twice for about 5 seconds each time but that was it. If anyone has any suggestions I'm all ears. I hope there is a simple fix.

The key lag or delay seems like it's a setting in the keyboard settings/ipad keyboard settings itself. Witness the keyboard preference pane in mac os x. I wonder if it's a accessibility setting...
To rule out third party apps:
1. Launch the Notes app. Type. If the notes app does not have the issue, it is the specific third-party apps you are using. I notice that some apps do not support bluetooth keyboards. Normally, they don't type at all.
But who knows?
2. Look for something in setting that controls keyboard delay?
Shut down any "open" apps. (I know that multiple apps cannot run at the same time on the ipad, but humor me.) [Note: just replicating what apple sometimes has people try.]
Turn off wi-fi and cellular data. Test again.
If this works, some syncing or downloading activity is happening in the background and creating lag.
Given that entering the code works fine, I doubt the hardware or bluetooth connection is faulty.
Post back with results and we'll decide what to do.
P.S Have you tried pairing the keyboard to a computer? Does this work ok?

I bought a digital av adapter and it does not work with ipad2, what do i do?

Bought a digital av adapter and it is not supported by ipad2. What do i do?

Mine works fine with both my iPad and my iPod Touch. Been using it for two years. I recently replaced it with an Apple TV.

Image Capture not working with 10.6.6

I use a Canon MP780 printer/scanner with my Macs. I have no printing problems. However, when I upgraded to Snow Leopard the Canon MP Navigator scanning software stopped working and Canon's downloaded driver update didn't resolve the problem. Despite conversations with a helpful Canon engineer they seemed unable to offer a solution. However, I started using Image Capture as a satisfactory solution and this has worked fine until I upgraded to 10.6.6. Now this has stopped working too - I just get the message 'No camera or scanner selected'. I tried installing the recent Apple Canon download (Dec 14th 2010) but it hasn't resolved the problem. I see that the MP780 scan function does not seem to be supported by Apple on a list they publish on the site, however.
I can still scan by using the printer dialogue box but it is very long-winded and not very satisfactory. Is there any hope of me being able to use Image Capture again with my scanner?

fordwich wrote:
I use a Canon MP780 printer/scanner with my Macs. I have no printing problems. However, when I upgraded to Snow Leopard the Canon MP Navigator scanning software stopped working and Canon's downloaded driver update didn't resolve the problem.
The MP Navigator application requires the [Canon MP780 scanner driver|http://support-au.canon.com.au/contents/AU/EN/0900205301.html] to be installed. The Canon driver update from Apple does not include this full scanner driver, only a mini driver that lets you use the scanner via Image Capture/Preview.
However, I started using Image Capture as a satisfactory solution and this has worked fine until I upgraded to 10.6.6. Now this has stopped working too - I just get the message 'No camera or scanner selected'. I tried installing the recent Apple Canon download (Dec 14th 2010) but it hasn't resolved the problem. I see that the MP780 scan function does not seem to be supported by Apple on a list they publish on the site, however.
The mini driver mentioned above is known as an ICA driver. Canon provides this package to Apple for software download and also has it for various models on their web site. Checking the Canon Australia web site, the MP780 does not list the ICA driver. And checking the Canon IJSCanner1 package located in Library > Image Capture > Devices, which is where this information gets copied to, the MP780 is not in the devices list. So this confirms what Apple has listed on the web but makes no sense how you were able to scan on 10.6.5 or how you are still scanning now via the Print & Fax section, which uses the ICA driver. I would not think that the .6 update would remove the MP780 from the device plist. I need to check a previous build when I get back to the office.
But in the meantime if you can still use the MP780 in Print & Fax then this is the same as what you get in Image Capture. If you click the Show Details tab in the scanner preview window then this may be what you were used to with Image Capture.
And I believe that if you install the full scanner driver then you will be able to use [MP Navigator v2.0.8|http://support-au.canon.com.au/contents/AU/EN/0900182001.html].

Image capture not work with ios5

Image capture/iphoto couldn't recognize my iphone4 after update it to ios5.

I WAS having the same problem. With the introduction of photo stream, Apple currently is not allowing you to use the photo stream option concurrently with the manual import option with Image Capture. You have to choose one. My situation was that I had old picture on my iphone which were not being streamed and I hate using iPhoto.
This is what you have to do to use Image Capture on Mac... again...
1. Disable photo stream on your iphone
2. Connect iphone to mac
3. Open image capture
4. Your iPhone will show up under devices and proceed normally
5. Voila!
Rationale: Like I said, since Apple does not give you the option to use both features (manual import via Image Capture or photo stream) you have to choose one, and by disabling photo stream on iphone, it lets you import images via Image Capture as you would normally.
You can use Keaggy's method, but I hate iPhoto. iPhoto does not let you choose your own directory which is annoying.
So those who want to go back to your regular ways, use the method above.
Message was edited by: schandi

Log and capture not working with Apple intermediate Codec

Hi,
I just got my copy of Final Cut Pro 6.
I'm trying to capture HDV footage using the apple intermediate codec, but when I try to open the log and capture window, it just comes up with a window saying 'HDV capture', but with no logging options at all. It just captures from that point onwards from the tape.
Tom

You need a video IO card to transcode the signal to another format on capture - you're just connecting the camera via Firewire, yes?
(Incidentally, even if you could get this work, AIC is almost certainly the 'wrong' codec for whatever you're doing. What's your worklow reason for choosing that format? And finally - are you really running OSX 10.3.9? You need to be on 10.4.9 to run FCS2)

Airplay does not work with Ipad2, with my Iphone 5 no problems...

I bought AppleTV 3. Airplay works perfect with my Iphone 5 (ios 6.0.2) but is really having problems with my Ipad 2 (ios 6.0.1), nothing, or just sound when using game apps. Photo apps seem to work. What could be the problem, and more important what is the solution.

Problem seems to be resolved. Should have thought of it myself ;-) thanks so far!

Add new document link not working in upgraded sharepoint 2013?

Hello there,
Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
is working fine with environment Office web apps not configured with Sharepoint.
Looking resoluion /suggestion, thanks in advance.
Regards,
Sushil

Hi Sushil,
According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
from 2010 to 2013.
For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
1.In SharePoint 2013 Central Administration, click Manage web applications.
2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
it using claims-based authentication, or you can change the authentication method of the web application.
Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
To do this, run the following command on the SharePoint Server:
Get-SPWopiZone
The result will be one of the following:.
internal-https
internal-http
external-https
external-http
Next, run the following command on the SharePoint Server.
Get-SPWOPIBinding
In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
the WOPI zone to match the result from Get-SPWOPIBinding.
If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
For more information, please refer to the article:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Image capture not working in lion

Well! After 10 years or so of OS X my Kodak DC 5000 no longer works in image capture after upgrading to OS X Lion. After connecting the camera and trying to import images, Image Capture says "no device connected".
Went to the loca shop and using the same camera and cable, successfully imported picts to the desktop under Snow lepard, so I know it's not the camera or cable. Been a mac user for decades! never had a problem with "plug and play" until this update!
Do I need to get a card reader now? New camera? Not happening as long as this one works(ed). Already lost Photoshop, but didn't mind as I bought Pixelmator. However, the Image Capture not working is a showstopper. Is this Apple's version of Vista? Help please!

Yes, I have iPhoto 9.1.5, I also used the prefs and this still is not working. The upgrade to OS X Lion broke my driver and I am not able to do transfer any pics from the camera.
I assume I will now need to buy a card reader.

HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
Maps took me to the completely wrong side of town for a long standing business in town.

Hello margmcarlson,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
Best of luck,
Mario

Sharepoint send to button not working with document mode 9

Hi All,
We are using document mode 9 for HTML 5 in the master page but the SharePoint send to button is not working with ie 9.
Can anyone help me to resolve this issue.

SharePoint 2010 doesn't use HTML 5, so its possible that the browser is running in quirks mode. Try the default compatibility mode and see if that works for you.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

What has happened to the iPad 2 finger select and drag technique? Since upgrading to iOS7 it does not work? I used this all the time to select multple images, approx 75 from an SD card containing 1000 images. Its painful indvidually selecting the images

What has happened to the iPad 2 finger select and drag technique?
Since upgrading to iOS7 it does not work?
I used this all the time to select multple images, approx 75 from an SD card containing 1000 images. Its painful indvidually selecting the images

What would you like us to tell you? If it doesn't work, there is nothing that we users can do about it.
Please submit your feature request to Apple at this link: http://www.apple.com/feedback

HP AiO on iOS7 document capture not working with iPad2?

Similar Messages

Maybe you are looking for