HP All in one 1110 not scanning

Hello all. I recently picked up a new Macbook Pro as my old one decided to kick the bucket.
While I've managed to get most of my software and hardware working, my HP1110 wont scan. It prints fine but refuses to find the device as a scanner.
I've downloaded several drivers and software packages to try and counter this, but to no avail.
Please help as I would like to avoid having to spend even more money on a new scanner.
Thank you.

Start at http://h10025.www1.hp.com/ewfrf/wc/searchResults?tmpqt=%22snowleopard%22&product=90787&tmpproduct=HP+PSC+1110+All-in-OnePrinter&lc=en&dlc=en&cc=us

Similar Messages

My HP LaserJet 3055 All In One does not scan using Windows 7 - 64bit.

My HP LaserJet 3055 All In One does not scan using Windows 7 - 64bit. I can copy and print only. Thanks.
This question was solved.
View Solution.

Hi,
Is the printer connected to your PC by USB or network?
By using USB connection, you may scan using the Windows Fax and Scan software integrated into your OS.
Scanning through a network connection unfortunately supported on Windows7 32 bit only, as you may find listed within the About network scanning section below:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02539136#A2
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Office Jet J6480 All In One - will not scan with Mac OS 10.8 .3

I have been unable to get my HP Office Jet J6480 All In One to scan after upgrading to 10.8.3.I have followed other posts and have installed the most up to date driver (http://support.apple.com/kb/DL907) but each time i try to scan from the HP device manager or the photosmart studio, it says "Sorry, scanner could not be intialized. (scanner not found)" I have tried making sure there are no other updates by clicking on settings in the device manager and clicking check for updates but it tells me "server not availalbe - the software service is currently not available. please try again later" and i have gotten this error for the last week.
I followed the second set of instructions found here: http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Software-Update-Server-Unavailable/td-p/18... to try to resolve that issue and have installed the software found at the link. I rebooted my computer and am still having the same problem.
Note: My printer is wireless and i have not hooked it up via a cord. Will that make a difference?
My printer seems to be printing fine.
Thank you for any help you can provide.
Sara
This question was solved.
View Solution.

Try scanning from your Mac. Use Image Capture app in your Applications folder.
Click once on the scanner on the left side, then click on Show Details along the bottom. Along the right side you will see LOTS of options for scanning and saving.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I'm using windows 7 with a hp deskjet 3059A e Printer All-in-One J611n not scanning pc not found

My Deskjet 3059A e printer all-in-one J611n was working fine til my pc crashed. Now I can't get it to scan. Says computer not found & it is switched on to my pc via usb cable.... Help

Hello @terezaferreira , Welcome to the forums
I read your post about the scanning problems and I am here to help you out.
I would first suggest you restart the computer completely, and power reset the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Now with both the printer and PC powered on, run the Print and Scan Doctor from your computer and send me a screen shot of the results or write me back with the detailed results.
Try scanning from the HP Software on your computer, and also scan from the printer to your PC. Tell me if either ways worked and what happened!
Have a great Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Newly bought HP 7520 e-all-in-one does not scan in color on mu Mac OS 10.9

Help need, totally frustrated.
Just installed a brand new HP 7520 e-all-in-one on my new MAC OS 10.9. The product prints and copies in color. However all scans come out black&white??? Who can help me, desperate in time constraints. I have the printer USB connected.
Elske
This question was solved.
View Solution.

Hi,
The default scan workflow configured to scan documents as Black and White. Make sure to change the scan settings to scan documents with color:
1. Open the HP Utility and select your device.
2. From Scan Settings open the "Scan to Computer".
3. Click the Scan Tasks tab.
4. Select the affected shortcut and click on Edit... (or just double-click the shortcut).
5. In the section of Scan from an HP Device click on the blue triangle or the Show Details button to enlarge the menu.
6. From the enlarged menu now open the drop-down menu next to Mode
7. Now select the Color option and then click on OK to save the changes. The next scanned document using this workflow will appear in color.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Deskjet 2540 All in one will not scan since Widows 10 installed

Printer wll not scan Uninstall all Hp sofware from Acer aspire E1 - 572 laptop Reinstall all HP sofware with the help of Instal Wizard and Support Assistant Ran Print and Scan Doctor, it says everything is ok but it still does not work System does not find printer Bob

I have now downloaded and installed the following HP softwareI have no idea which software fixed it but the printer now scans Bob

HP Photosmart C3180 All-In-One will not scan

I did a clean install of Snow Leopard on my iMac. At the end, it prompted me to download updated drivers for my printer/scanner/copier. I clicked "OK" and let it run.
I can print without any problems. But the machine will no longer scan. My computer doesn't recognize there being any scanner installed, either. I have tried running other updates, including the HP drivers/software update released on Apple's site on Sept 21.
I have also tried running the drivers installation from HP's site for Snow Leopard.
Apple's and HP's support both say that the drivers are all built in to Snow Leopard, and to use Image Capture or Preview instead of the HP programs to do a scan.
In short, nothing's solving my problem.
Has anyone found any solutions to get your machine to scan again?

I think I found a solution, or a workaround at best.
I used OmniDisk Sweeper to remove ALL printer drivers/software from my machine. I then ran Software Update in OS X 10.6.1. It downloaded and installed the drivers for Snow Leopard.
I can now scan in Image Capture, and saves the file as a JPEG. I still cannot scan via Adobe Acrobat Pro without it crashing Acrobat. I suppose I can bring files in as JPGs into Photoshop and save them out as PDFs until HP comes up with a real set of drivers and software suite that restores functionality to what it was before Snow Leopard came along.
Hope this helps other people struggling with HP and Snow Leopard for the time being.

HP Officejet 8600 all-in-one will not allow me to use features

ALCON - after installing Yosemite (well upgrading) my all-in-one is not functioning. I have gone to HP's website to no avail nothing that can help. I uninstalled the software restarted my computer and restarted the printer. Updated the firmware on printer yet nothing is working correctly. I cannot scan documents nor fax. I get a message from the printer saying that the printer cannot communicate with the computer. I also have the HP assistant installed on my mac and yet still the computer cannot communicate with the printer's scanner and vice versa. I am at a loss. Any feedback would be appreciated. I really need to scan some documents and get them sent out. I had to go to my PC as a last resort. Suggestions please?

I may have found a fix for this problem. For those who are using Mavericks or Yosemite: Uninstall the current printer driver and install the printer driver dated Oct 22, 2014 and then install a patch update. I will copy and paste the link. For some odd reason the drivers I had prior to upgrading the OS was not willing (I upgraded from Mountain Lion).
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4182&lc=en&cc=us&dlc=en&s w_lang=&product=4323648#N191

Installed HP Officejet 4100 All-in-one does not appear in Control Panel printer selection window.

My HP Officejet 4100 Series 'All-in One' DOES NOT APPEAR in the Control Panel window even after several re-installs. The diagnostics indicate that the 4100 is not connected and dos NOT point to any path for a solution.
Attempts to download a current Driver, ( or re-load the 4100 "software" ), WILL NOT work because the 'help' page states the driver already comes with the 4100 software and therefore does not provide for any download update, (driver or software) for the 4100 printer.
I have reinstalled from the original Disk for the 4100 and also attemped install with Windows Update requested driver. Nothing works.

Hi there @Past77
Welcome to the forums
I read your message about your Officejet 4100 not showing that it's connected, and that you have attempted to run the Windows Update to see if that would help get the printer working again. You are correct that this model does not have a downloadable driver for Windows Vista, so your best bet would be to try running the Print and Scan Doctor tool, to see if it can kick the printer into gear and have it functioning again.
If the tool does not work, I would then recommend looking in to a printer upgrade. Consider giving us a call to see what your options are with HP.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Best wishes to you,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Okay so i recorded a song but each part comes out as like take 1, i have 10 takes. how can i put them all together as one take, to make one song all in one take not small pieces of a song.

okay so i recorded a song but each part comes out as like take 1, i have 10 takes. how can i put them all together as one take, to make one song all in one take not small pieces of a song. like i hit record and sang the entire song but when i hit play it was in pieces not just one song like it was in ten takes. is there any way i can blend it all into one take, to make one clear song?

You're not very clear in stating your problem. Maybe it's terminology: "takes" in recording lingo (and in GB lingo) are different version of exactly the same part in a song, so you only want one of them in the end. Please tell us exactly what you did and what it is that you don't like.

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time. This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail! Any help?

The cyan portion of the printhead may be clogged. I would suggest running the diagnostics shown here. If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Driver for Officejet 4500 Wireless all-in-one will not install after upgrading to Windows 8.1

Upgraded to Windows 8.1 on Pavilion g6. Officejet 4500 Wireless all-in-one still prints but won't scan. Downloaded full feature driver. Installation quit giving error message 'file cannot be found'. Tried 'chat' sessions with no resolution
This question was solved.
View Solution.

Hello bob5e,
I am sorry to hear that you are unable to install successfully on your Windows 8.1 with your Officejet 4500 Wireless. I can see that the installation quits on you, giving you an error message. I am going to recommend trying a couple of things to hopefully make the installation successful.
1. First of all, try installing by using The Printer Install Wizard for Windows which finds the correct driver for your unit and installs it.
2. If that does not work, please try this next troubleshooting document step by step.
Installation issues - The Progress Bar on the Software Installation Stops or Stalls
I hope this helps!
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet Pro 8600 e-All-in-One Printer - N911a: Scan & Copy in color results in full cyan page

Product Name: HP Officejet Pro 8600 e-All-in-One Printer - N911a
OS: Windows 8.1 64 bit
I noticed the problem: After I scanned a medical card that was 80% cyan.
Problem: The problem persists when scanning/copying using the ADF or using the scanner glass bed.
Only occurs during color scanning or copying. I can print a file from my laptop or home pc with no issues, as long as the color file did NOT come from my printer.
If I had scanned the small O'Riley's note in black & white there would have been no streaking.
I have reset, used the HPP Dr., cleaned the glass, etc, & followed Solutions 1 - 3 http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02881567&lc=en&product=4323659&tmp...
I sincerely appreciate your assistance.
Rene'

Hi @Veritasabt,
I see that you are having issues scanning and copying in color from the glass and the ADF. Thank you for providing the screen shot. I can help you out today.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Update the printer's firmware. HP Officejet Pro 8600 N911a Firmware.
Try scanning again to see if you have the same results.
Please check your private messages for additional steps to try.
In the forum beside your handle name just click on the envelope to view it.
Have a nice weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Officejet Pro 8600 Plus e-All-in-One - terrible print & scan options

I just purchased an HP Officejet Pro 8600 Plus e-All-in-One an the print options look like they were written by someone from the 1990s. There are no options for lower resolution - only draft, normal, best and no option for black and white - other than grayscale. The print options box is the default box that was originally develped in the 1990s - no kidding. I also tried scanning some items and the box to see the scan is about 5" x 5" and there is absolutely no way possible to see what was scanned. I originally loaded the software using the disk provided witih the printer, but then I went on line and downloaded the "Full" version - which loaded exactly what was on the disk. I can not believe HP is even selling this thing with these types of drivers. I loaded the drivers onto my HP Desktop, running Windows 7 home, 64 bit and my HP laptop running Windows 7 Ultimate, 64 bit. Both HP computers are Intel I7 Quad core computers w/ 9 & 12 Gb of RAM respectively.
What gives? Do I need to return this thing because it certainly does not work properly and is not up to the HP standard we expect - especially for the $300 it costs to buy the thing. I bought this all in one because HP refuses to update the drivers of my older HP scanner to support Windows 7. That scanner showed the preview with a full screen, allowed me to change resolutions of scans, colors, etc.
Has anyone else experienced this type of garbage?

I agree the HP customer services and product services suck. I have an Officejet Pro 8500 and consistently had problems.
I think I'll change to a Cannon printer or another company. It is apparent that HP does not care.

HP PSC 1410 All in one Printer not installed

In windows 8 after complete and lastest installation of Driver of HP PSC 1410v All in one, in the Control Pannel, Device and Printer Tab only scanner icon is showing no any printer icon and no other HP Icon, so i can use scanner only of this model but not printer. After reading suggestions I install the windows 7 driver in windows 8 after solution of fatel error here is also only scanner is showing no facility for printing, please help me where I am wrong or whats solution fast plzzzzzz.

Hello Jai_pareek,
Welcome to the HP Support Forums! I see you would like to install your HP PSC 1410 to your computer running the Windows 8 Operating system. You tried downloading the Windows 7 driver but are now getting a fatal error. Please go ahead and start with the steps listed below:
1. Unplug the USB if using a direct connection.
2. Remove the HP PSC 1410 software from your computers Control Panel's Uninstall a program option.
3. Restart the computer.
4. Make sure ALL the PSC 1410 software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
5. Now go ahead and download the software and drivers for your PSC 1410 (DO NOT plug in USB until the software prompts you to):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-110055-2&cc=us&dlc=en&lc=en...
6. Go ahead and print a test page.
7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP All in one 1110 not scanning

Similar Messages

Maybe you are looking for