HP All-in-One 2100 Prints Blank Pages

Anyone had this issue where an HP ALL-IN-ONE only prints blank pages, or only parts of the page? It worked great for years, now after a few clean installs, it's junk. Sometimes it works somtimes not. Now seemingly always not.
Any suggestions?
Thanks!

I have had this problem FOREVER. I even paid the $59.95 to HP for "Support time" to fix the problem, which they never could do.
For the last year or so I've been using GIMP print drivers, which work, but I have even better news.
Every few months I check the HP site to see if they have released new drivers. This weekend when I checked there was a new driver, version 7.9, as a Universal binary. So I gave it a shot.
I have an OfficeJet 6110xi, but I bet they updated it for all the All-in-ones. Here's the link to the drivers I am using:
http://h10025.www1.hp.com/ewfrf/wc/softwareList?lc=en&cc=us&dlc=en&product=79480 &lang=en&os=219
To my amazement and surprise everything is working again!
Another great surpise is that scanning multi-page documents under "PDF to Adobe Reader" now actually results in one file with N pages rather than N 1-page files.
It was a long wait, but thank goodness it's finally over!
Best of luck,
Alan

Similar Messages

HP 3510 All In One only printing blank pages after cartridge replacement

Recently replaced my blank ink cartridge after supply level showed low, and printed output looked faded.
Using genuine HP product - check
Cartridge supply level good - check
Powered on and off twice - check
Installed, removed, re-installed cartidges - check
Good paper - check
Alignment prints blank page - does not print partial or low quality, just produces a blank page.
Printing from my computer, a word document, also produces a blank page - not parital - blank.
Was printing before the HP cartridge change.
Did I buy a bad HP cartridge?
Any help would be appreciated.

Forgot to mention that I am not getting an error message either, except when I go through the motions of scanning the (blank) alignment page. That error is related to the fact that it is blank though.
Thanks for any assistance.

Hp all-in One remote prints test page but cannot find printer for anything else

The HP All-in-One application can print test pages on my 8610 but when I go to any document or photo and try to print I get the following message "This Printer is not available." I have checked and have the latest version of the HP All-in-one Printer Remote application and the HP Print Service Plugin applications from the Google Play store. I am using a Samsung Galaxy 5 running Android 5.0. If I print a page from my laptop using wireless to this printer, I can see the All-in-One application tracking my printer status so I know it can see the printer. The app on the phone will show the status under the printer name going from Ready to Unavailable to Ready as a document is printed and then finished. I am printing directly with local WIFI and am not using the ePrint feature.

Hello , Welcome to the HP Forums!
I hope you have a pleasant experience here. I'd like to help you with the issues you are having printing from your Samsung Galaxy S5 to your HP Officejet Pro 8610 e-All-in-One printer. Firstly, do you have the printer plugged directly into a wall outlet? The printer has a power moderator built in, so if it is plugged into a power surge bar or battery backup it may be getting inconsistent power. This can cause all kinds of firmware glitches (like the printer status not being broadcast properly). If that doesn't immediately resolve the issue, please follow the steps below: Network Power Reset: Let's leave the router on and unplug the power cable (NOTE: Do not reset the router.), then do the same with the printer, and shut down the computer. After a full minute, plug the router back in, wait for it to fully power up, then plug the printer back in and wait for the wireless light to become solid. Once both the router and printer are on, go ahead and turn the computer back on. Doing this will refresh the network connection. Restore Network Defaults and Reconnect: 1. On the front panel of the printer, touch your wireless icon at the top2. Select Settings.3. Select Restore Network Defaults.4. Restart your printer.5. Once it's booted back up, touch the wireless icon again.6. Select Settings.7. Select Wireless Setup Wizard and follow the prompts to enter your wireless network details.8. Try enabling the web services again. Another thing I would suggest, would be to download the HP ePrint app, rather than the All-in-One Remote. The Remote is moreso suited for scanning to your phone from your product, so I would suggest trying the ePrint app (you can download it from the Play Store). If the issue persists after these steps, please answer the following questions so I'm better able to assist: Are you able to print reliably from any other devices on your network?What brand and model of router are you using?What is it that you are trying to print? (ie. E-mail, photo, document)What app are you printing from? (Some Android apps have a direct printing feature)I look forward to hearing back from you and working towards a resolution to this issue!Have a great weekend.

HP 3180 All-in-one will print test page but nothing else

Hi,
I have a HP 3180 All-in-one connected to my desktop PC which runs on Vista OS. The printer seems to be perfectly happy to print a test page but with all other documents it feeds the paper as though it's getting ready to print, then the cartridge moves to start and nothing happens. The programs I have tried printing from include Microsoft Word 2003, Opera (to see if it was just an issue with Word) and Notepad. Google Chrome won't print either, and pops up with the ONLY error message I have recieved from any program which states : "Something went wrong when trying to print. Please check your printer and try again."
Notepad seems to print fine, as with the test page. With all the other software nothing shows up in the printer queue at all when I open the Printers and Devices window. I have run HP Diagnostics on it and that says that nothing is wrong.
Is this a problem with driver versions? I believe my boyfriend has uninstalled and reinstalled numerous times.
Any help is much appreciated.
Best regards,
Bexytea

Hi Bexytea - I noticed you mentioned you had run the HP diagnostics on it. Not sure which one, but if it wasn't the print diagnostic utility, I'd definitely recommend running it:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?lc=en&dlc=en&cc=us&lang=en&softwareitem=mp-...
If you've already tried that utilitiy with no success, you might try installing one of the drivers that comes with Windows Vista by going into the Printers window, right clicking and selecting add printer - follow the prompts, choose HP and there is a selection for HP Photosmart 3100 series. It may not provide full functionality, but it would help narrow down the issue and might provide a workaround for the short term.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

HP Officejet J4540 Prints Blank Pages

Yesterday, my J4540 all-in-one started printing blank pages. I just replaced the cartridge a couple of weeks ago, and it still has plenty of ink left. I'm using a USB connection, and Windows Vista. I tried doing a search for what the problem could be, but haven't found anything yet. I also tried to copy something with the printer, and it copied fine, so I don't believe it's the ink. No error messages come up, and when I ran the HP diagnostic, it said there was nothing wrong with the printer. I tried restarting the printer, leaving it off for a minute and then plugging it back in, but that didn't do anything. If anyone has any ideas, I would appreciate hearing them. Thank you.

Hi Parkaboy,
I understand that you are having an issue with the quality of your prints. I will try my best to help you resolve this issue. In this document for Troubleshooting Print Quality Issues there are several steps for resolving this issue.
I hope this helps, let me know.
Thank you,
I worked on behalf of HP.

HP PSC 2175 All-in-one prints blank pages from word, chrome and notes

My HP all-in-one printer PSC 2175 all-in-one has suddenly decided to print blank pages.
So far I've tried printing from Word, Notes and Photoshop but come up with nothing.
It prints test pages and diagnostic pages without any problems and it makes direct copies without problems.
The diagnostic tool can't find anything wrong.
I've run all the software I could find on Swedish HP.
I've reinstalled the printer, reinstalled Word, repaired Windows, nothing helps.
I have Windows XP, fully updated.
Any suggestions?
HP PSC 2175

I am having this problem too - just prints blank pages. Ran the tests checked cartridges settings sanity nothing.Scans fine.I currently have three duff printers in my office which is more than frustrating...

HP Deskjet F2480 All-in-One prints BLANK PAGES

Dear All, I have a serious issue with my HP Deskjet F2480 All-in-One Colour Ink-jet - Printer / copier / scanner.The thing is that it prints BLANK PAGES. I tried everything from the manualHP Deskjet F2400 All-in-One series:
"Print troubleshootingTry the following solutions to resolve the issue. Solutions are listed in order, with the mostlikely solution first. If the first solution does not solve the problem, continue trying theremaining solutions until the issue is resolved.• Check cartridges• Check paper• Check product• Check printer settings• Reset the product" IT DIDN'T WORK! The printer is still printing BLANK PAGES. The ink level is sufficient to print a page - the HP Solution Centerapplication says that 'the actual ink levels may vary' but it shows a tick-mark, which means that everythingshould work. However it still start the process of printing (blank) and blows the page again - blank page. HELP? HOW CAN I RESOLVE THIS PROBLEM? janviv1

I am having this problem too - just prints blank pages. Ran the tests checked cartridges settings sanity nothing.Scans fine.I currently have three duff printers in my office which is more than frustrating...

HP Deskjet 3050 All-in-One Printer J610a is printing blank pages

Your HP Deskjet 3050 is printing BLANK PAGES?
The printer ejects blank sheets of paper when printing. Some or all the printed pages might be partially blank or half printed. It can be the software that you are printing from or program. Sometimes it can be the actual print head needs cleaning or cartridges are low.
Here is a link that will provide you with steps that will get the issue resolved. In this document you will have different Operating Systems. (Windows XP, Windows Vista, Windows 7 and Mac OS X) Software.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02744420&tmp_task=solveCategory&cc=us&dlc=en&lc...
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.
This question was solved.
View Solution.

Yes, the link is down.
See if you can print a self-test page or printer status report from the printer itself. If so, then it is a software or connection issue.
If you can print test page, try to use a different USB cable. Also, you can uninstall and re-install the software and drivers.
If you are NOT able to print a test page from the printer, try to clean the cartridges with lint free cloth and water.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Windows 8.1 printing blank pages from all apps

Morning Tech Support: My favorite people!! This just began within the this week where what ever appl I attempt to print from, prints blank pages. Upon viewing the print spooler, it shows doc going into printer okay, no probs w/ margins
or page size (already checked). Printer is Canon MG5400 (newer). I've already rebooted turned on the computer where the computer is installed. What else could it be. Working on installing new updates that just came down as well.
HELP!!!!
s.hamel

Try install all updates for Windows and check for update for latest version of your printer's software.
Try run a test print and check if it works.
Also check the cartridge and make sure they are okay.
You may contact Canon's support too.

HP psc 950 all-in-one is printing half the page...cuts off the top portion of what I am printing.

HI! My HP psc 950 all-in-one is printing half the page....cuts off the top portion of what I am printing. Not sure what happened to the printer. Came home one day and the printing wasn't the same. Possibly the kids could have fiddled with it but no one is owning up to it. Any solution to get the printer printing normal again?
Thanks
-L

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How do I stop my PSC1510 All-In -One from printing a test page every time I power it on?Thanks

How do I stop my PSC1510 All-In -One from printing a test page every time I power it on?Thanks

This occurs when the printer is not aligned completely.
Please follow the steps mention in the link below to resolve the issue:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01336348&cc=us&lc=en&dlc=en&product=428800&tmp_...
Please mark the post that solves your problem as "Accepted Solution"
Although I am an HP Employee, ALL of my posts express MY opinion, and not of HP, whatsoever.

How do I keep my HP1510 All-in-one from printing so many test pages?

How do I keep my HP1510 All-in-one from printing so many test pages? My printer is connected to my laptop, and it seems that every time I disconnect, the printer wants to print an test page when I reboot. I don't know where the option is to turn this off.
This question was solved.
View Solution.

The pages are likely alignment pages. When a new cartrdige is installed the printer will print an alignment page that must be placed on the scanner glass and the Scan button pressed to complete the alignment process. If the alignment is not completed it will repeat when the printer is turned on or perhaps at the end of print jobs.
The alignment page will stop printing when the alignment process has completed. See the page here for information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I can't print web pages or emails. All I get is a blank page with nothing but the headed tag at top.

I can't print my emails. Tried to get help from my email provider. They asked if I could print pages. I tried and found out that didn't work either. All I get is a blank page with the header tag at the top.

Hi,
Please see [http://kb.mozillazine.org/Problems_printing_web_pages this]. If the web page has a Print button/icon you can try to use that. You can also try right-clicking on the relevant section of the page > '''This Frame''' > '''Print Frame'''.
[https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox?e=sph&redirectlocale=en-US&as=s&s=printing&r=0&redirectslug=Firefox+prints+incorrectly Fix printing problems]

REPORT SERVER 6i Patch1 PRINTING BLANK PAGES

I have a problem that is occouring on three different report servers. It will start printing blank pages instead of the report and the only way to get it back to normal is to stop and reastart the service. I get this on a version 6, version 6i and version 6i patch1 report servers. It makes no difference what call method I use (command line or OCX control). I can also force this behavior on one of the servers by selecting a HP 895C as the default printer in the windows printers and then starting the service. All pages print blank after that. At the customers site it appears to be random as to when it will start printing the blank pages.
Any ideas on what the fix is for this?
null

Is there any ideas on this?
We have a Reports 6i server up and running and I'm getting stuff out OK to postscript printers, but some HP older printers are just spitting out blank pages. Is there a desformat= that I need to set differently? I've tried most of the options ( dec, psport, psland, hpl... all blank )
Appreciate any help, I haven't used this stuff long, so am quite naive about how it hangs together.
null

HP Officejet Pro 8000 Printing Blank Pages Instead Of Data And Also Reorienting Itself

Hi all
We have a wireless HP Officejet Pro 8000 in our office (but via cable, not wireless) to a network. The printer is occasionally printing blank pages instead of say a spreadsheet selected to print.
The other issue is that if you say are printing two copies of the same spreadsheet, one prints okay (say landscape) and the second copy, selected at the time of printing, prints it portrait but only part of the left hand side of it and the rest is blank. Coming out of and going back inthe file usually recitifes this. But it does it again any time it feels like it.
We did have an upgrade, where our IT guy took away our desktop boxes and replaced with smaller base units and everything is run from a main server and alsoan upgrade from Windows 2000 to Network. Problems started after this and the IT guy did update the printer driver.
Please would anyone be able to assist? Any help for this frustrating problem gratefully accepted!
Thanks,
Saxplayer67

So the issue with the 8000 printer is periodic print jobs do not come out as you are wanting them. Is that right? This is interesting, just from the point of view that generally speaking issues like this are like a light switch, they are either there or they are not - they usually don't come and go. That being said, we are going to see what we can do to resolve this. First I am going to recommend that we perform a clean installation of the printer after uninstalling it from the machine. By the way, what is the operating system you are working with - Is it Windows 2000 Network?
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3762364
Install that and let me know the result!
Have a great day!

HP All-in-One 2100 Prints Blank Pages

Similar Messages

Maybe you are looking for