HP All-in-One 2355 Shared from Windows PC - Cannot print from any Mac

Hi all!
I have a HP All-in-One 2355 printer. It is installed correctly on my Mac, and when I try to use it connected by USB, works fine.
But the printer is all the time conected to a PC, where is installed to. The PC runs Windows XP, at is in the same Wireless network as my MacBook Pro. The printer is "shared" on this PC.
When I search the HP 2355 with my MacBook throught wireless, I can find it. I see it if I going to Preferences Settings, Printers, Windows, Workgroup... Then I can add the printer, but I can't select any driver to asign, because the driver for HP All-in-One 2350 series don't appear.
What can I do? I contacted with HP, but they tell me that they don't support sharing between Windows and Mac.
Please, Help me!

Install this three-part driver:
http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs

Similar Messages

  • Can't print from Windows PC to printer on I-Mac USB over wireless network

    I am a brand new Mac user after years of Windows frustration.
    Canon i9100 connected to I-Mac via USB. Prints OK from I-Mac. Print share enabled. Windows share enabled.
    I-Mac on wireless LAN with static IP addresses for all devices.
    Dell Windows XP on same wireless LAN.
    Can ping I-Mac OK.
    Added printer on Dell through Windows XP using I-Mac static IP address and I-Mac printer name - installed OK, but will not print.
    After hours on Apple Support, found and downloaded Bonjour for Windows and installed on Dell. Ran Bonjour on Dell, installed printer OK, but still won't print from Dell.
    Very frustrating and I haven't started on my VPN issues yet - thought Apple would be far simpler.
    Wotto
    I-Mac Intel   Mac OS X (10.4.5)   Dell Inspiron Windows XP

    On Windows, after either method of setup, change the driver (on PC) to Apple Color LaserWriter. Apple print queues expect postscript as input.
    If this is unsatisfactory, you can create a RAW queue on the Mac (only for sharing the printer, because it will have no driver associated):
    http://www.stocksy.co.uk/2004/03/printingto_103x_pantherwith.php
    (This guide mistakenly says it doesn't apply to Tiger - but it DOES)

  • Cannot print from internet

    I have an HP computer, HP office jet 6600 hooked up wirelessly, can print from windows but cannot print from the internet. When I did a windows trouble shooter, it came up with missing microsoft teredo tunneling adaptor/driver. I tried downloading the repair for it and it started a scan that started at 10 PM and was still running the next morning. I removed tht from the computer but still cannot print from internet. Can anyone help me?

    Hi @Cabon,
    Welcome to the HP Forums!
    I see that you can print from Windows, but not from the internet. I am happy to help you with this printing issue!
    What version of Windows are you using? If you do not know the operating system you are using, please visit this website. Whatsmyos.
    In the meantime, please see this printing guide, Print Jobs from Your HP Printer are Stuck in the Print Queue. (Even though the guide title may not match your issue, I believe the solutions will help). 
    Hope this guide helps, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Unable to install hp all in one officejet x64 drivers windows 8 it

    unable to install hp all in one officejet x64 drivers windows 8 64 bit from hp website the select all button is not working.

    Hello louvallee,
    If you had upgraded  you PC OS to win 8.1 and if you were able print with the prior OS, then you may have to first uninstall the existing printer software and try step# 
    Else
    1) Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Enquiry regarding functionality of HP ALL IN ONE Q 1660A on windows 7

    Dear sir,
    I was using the referred HP 'ALL IN ONE(PSC) with Windows XP Professional version successfully.  Now I am having windows 7 in my desktop.  Kindly advise that the same HP " ALL IN ONE" would work on windows 7. Also please clarify whether the new driver is to be installed for the same.  If so please provede me the link from where I can download the necessary driver.

    Hello @parth_pari,
    Welcome to the HP Support Forums!
    I understand that you're looking for a Windows 7 driver for your HP PSC 1200 series All-in-One Printer. Upon looking into the driver compatibility for this printer I found that in Windows 7 you need to use the Windows Update feature on your computer to install the printer as HP does not have a downloadable Full Feature Software and Driver package available due to the age of the printer. There hasn't been a Full Feature Software and Driver available for this series of printer since Windows XP.
    You can still use the HP PSC on your Windows 7 computer.
    For instructions on how to install the printer using the Windows Update features, please click here.
    I hope this helps clear up any confusion!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Does hp-v40,all in one is supported by windows 8? are drivers available?

    does hp-v40,all in one is supported by windows 8? are drivers available?

    Hi,
    Based on the following, no more support from Vista ages that means at least 6 years:
       http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=6063​...
    With luck, Windows 8 can find a generic, basic driver for your machine to print. Otherwise it's time to buy a new printer.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Cannot print from Windows XP in Boot Camp

    I rarely boot into Windows using Boot Camp. Usually will use Windows as a VM with VMware Fusion.
    Now I am unable to print when in Windows/Boot Camp!
    Yes, I can print just fine in Mac & in Windows as a VM.
    My Boot Camp installation of WinXP is the same one I use as a VM.
    I wonder if I changed some printer setting long ago & forgot. I am fairly certain I used to be able to print from Windows/Boot Camp.
    From: Windows XP/Control Panel/Printers & Faxes/My printer/properties/Ports
    The last port/box in the list is checked, “TPVM: ThinPrint Print Port for VM”
    I thought this may be incorrect for when I am in Windows using Boot Camp so tried changing it to LPT1 & then LPT2 & LPT3 & no real help. However, when using
    TPVM: ThinPrint Print Port for VM, When I attempt to print, nothing happens & no print job appears in the print queue. (See what’s printing) If I change the port to LPT1,2 or 3, than the job DOES appear & under status says “error.”
    I think I need to change some setting when I boot into Windows via Boot Camp vs. Start Windows as a VM.
    What is the problem?
    Thanks!

    Thanks but, no help.
    I did set up printer sharing. Even though I only have one computer I still share the printer between the Mac & WIndows on the Mac in both VM & BC.
    On Mac: System Preferences/Print & Fax, I do have the box checked “Share this printer on the network.”   Under Sharing Preferences I have checked; Printer sharing, Scanner sharing & file sharing. Users: Everyone Can Print.
    If I remember correctly, b4 I had set up printer sharing, I was unable to print from Windows as VM. It would send the print job over to the Mac side & would not print. Then I used to go into the sys tray on Windows & change something re the printer (I forget what) but essentially telling Windows to use this printer or activate it. Then when finished -- If I forget to undo that change, it would not print on the Mac side. Setting the printer to share fixed that so, I can easily print Mac or Windows VM.  Again, I very rarely boot into Windows/BC but I would like to be able to print when I do.
    It may be similar to use of the optical drive for DVDs/CDs. If I am in Windows/VM The Drive doesn't work until I go into some menu (Virtual Machine?) & enable the drive & then I must disable it to get it back working for Mac.
    I am going to try DVD & CD sharing & see if that fixes it so I can use the drive in both Mac & Windows VM w/o having to bother to change settings back & forth, Then I will see if doing that somehow breaks the DVD/CD drive for Windows/BC.
    Maybe I need to uncheck printer sharing in order for the printer to once again work on Windows/BC?
    Or maybe since I enabled printer sharing, I must somehow tell my Mac or tell Windows that all 3 can share; Mac, Windows/VM & Windows BC?  I’m sure if I had 3 different computers I would need to somehow tell the system which computers are authorized to use my Network printer. Maybe since Windows BC is never online/running at the same time as the Mac, it was not recognized?

  • I have just switched from windows and bought myself a new mac mini, only had it a few weeks and already getting message not enough free space. Help, surely cant be out of space already

    I have just switched from windows and bought myself a new mac mini, only had it a few weeks and already getting message not enough free space. Help, surely cant be out of space already

    It sounds unlikely of course. But from your question it's hard to tell what might have filled your HDD. Are you constantly on file sharing or has filled the drive with movies?
    Best way to tell is to start checking what folders occupy space. "Get Info" for the HDD and its subfolders is a way to start checking where the data in question resides.
    And as BGreg say, call Apple support is also a good way to begin with.

  • How to transfer my mails from Windows Live Mail (Win7) to the Mac.

    Hello! I have purchased my first macbook Pro after years of PC user.  I'd like to transfer my mails from Windows Live Mail (Win7) to the Mac.  How?  I haven't find any easy free way.  The WLM messages are .eml files and the Mac ones are .mbox files. Thank you so much.

    Did the Google for you
    http://answers.microsoft.com/en-us/windowslive/forum/livemail-sync/how-to-sync-i phone-with-windows-7-windows-live/9086427f-52d7-4722-b736-3127b041a9c8
    More hits here
    https://www.google.dk/search?q=sync+windows+live+contacts+with+iphone&ie=UTF-8&o e=UTF-8&hl=en&client=safari

  • Cannot print from the web although everything else prints ok - when asked to print I get one blank page then nothing

    I cannot print from the Web all else prints OK the printer throws out a plain sheet of paper and the print preview is blank
    == This happened ==
    Every time Firefox opened
    == about six weeks

    Try This!
    1) Go to Print Preview
    2) Print
    3) Name: HP PSC 2100 series (depend on your printer)
    4) Properties...
    5) Paper size: letter
    6) Change to Paper size: A6
    7) OK
    8) Repeat step 4 again
    9) Change back again Paper size: letter
    10) OK
    11) Don't print, but go back to Print Preview again and see if it works
    This is the one that have work for me after trying several times modifying about:config with no success. Good luck and hope that will help.

  • Suddenly I cannot print from firefox. It was printing one day and would not communicate with the printer the next.

    Suddenly I cannot print any web pages from Firefox. It was printing one day and not communicating with the printer the next. Did not happen with an upgrade to Firefox or plugins. Printer dialog came up but nothing sent to printer.
    == This happened ==
    Every time Firefox opened
    == suddenly- no known reason

    I cannot print from Firefox either all of a sudden. Maybe first thing in the AM, it will print something but then, that's it. I am running OX 10.5 too and using Firefox 3.6.8. I am ready to stop using this!! I like it but it is frustrating. I am on my mac all day for work and cannot find a solution to this Firefox problelm. Maybe Mozilla can help me. Anyone have any answers? I use a HP Laserjet 2300L.
    Thanks.
    Amy

  • I have an HP C309a all in one Photosmart. When I go to print on a Printable CD It only prints on 1/2

    I have an HP C309a all in one Photosmart. When I go to print on a Printable CD. It only prints on 1/2 Right side of disk. Why?
    I am using PS23 and used the label format for making the copy I wanted to print on printable disk.
    Herman

    HI,
    You should be able to just leave it on, it should have a sleep mode which it will enter after a while.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • HT4356 I have an older HP connected to the usb port of my Time Machine, and have it shared.  I want to print from my iPhone on the network, but it can not be found in airport?  How do I make this work?

    I have an older HP connected to the usb port of my Time Machine, and have it shared.  I want to print from my iPhone on the network, but it can not be found in airport?  How do I make this work?

    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    Read through this for information about Airprint printers and how to use them:
    http://support.apple.com/kb/ht4356

  • Have a HP C6180 all-in-one and I can never really do printing on bot sides of paper, even when it is selected in my i Mac all in one

    Have a HP C6180 all-in-one and I can never really do printing on bot sides of paper, even when it is selected in my i Mac all in one

    HI,
    You should be able to just leave it on, it should have a sleep mode which it will enter after a while.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • I cannot print from web pages with mozilla, can print from internet explorer and all other programs. I have a Cannon Imageclass MF8100.

    I cannot print from any web pages with Mozilla as my browser. The printer gives me a blank page. I can print from internet explorer and all other programs. I have a
    Cannon Imageclass MF8100 printer. I spoke to Cannon as I thought it was a Cannon issue and it is not.

    Try the '''''reset''''' described here: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

Maybe you are looking for