Hp all in one c309a

how to use my printer wireless with out conneting it to the router

Sure, just read the manual for wireless Ad-Hoc connection, page 7.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

I Have a HP Photosmart Premium Fax all in one C309A,I can't save the scanned documents since upgrade to Max OSX10.9.2

I Have a printer HP Photosmart Premium Fax all in one C309A,I can't save the scanned documents since upgrade to Max OSX10.9.2

Did you install the latest drivers?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3 737195&

Printing on Printable CD's With Photosmart Premium All in One C309a

I have a Hp Photosmart Premium All in One C309a that has the capability to print CD labels or Print directly on CD's, using Avery design pro label software 5.5, the printer gives an error message saying the CD tray is open. In order to print the tray needs to be closed. I've tried other label software but haven't found one that will communicate with the printer. I'm wide open for any and all suggestions.

Hi,
The link below for Printing Software may be of help
http://www.hp.com/global/us/en/consumer/digital_photography/free/software/printapp_index.html?jumpid...
If you're still having issues let me know and I'll follow up with other folks that know more on this topic...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Photosmart Premium All-in-One C309a.

Suddenly have error message on Photosmart Premium All-in-One c309a: "Only a Pictbridge capable device in Pictbridge mode s supported. Disconnect device." Have no idea what this is about.i

This is posted in your separate thread:
Hey there. I would try a power reset to fix the issue.
Press the Power button ( ) to turn off the product.
NOTE:The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the back of the product.
Disconnect the power cord from the electrical outlet, and then wait 30 seconds.
Connect the power cord to the electrical outlet.
Connect the power cord to the back of the product.
Press the Power button ( ) to turn on the product.
If this does not solve the issue then the printer will most likely need to be serviced.Hope this helps!
-SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Computer loses network connectivity with HP Photosmart Premium All In One C309a software installed

I am having an issue where my computer (Window XP Media Edition SP3) will loose all network connectivity after some variable amount of time when my HP Photosmart Premium All In One C309a drivers and software are installed. I cannot access the internet or other computers on my network from the affected computer until it is rebooted. When I uninstall the drivers and software, I do not encounter the loss of network connectivty. When I reinstall, the problem starts again. Within 24 hours, I will lose network connectivity requiring a restart. I have the software and drivers installed on another computer running Windows XP Professional SP3 without problems. Both computers are connected via ethernet cable to the network. The printer is connect to the network wirelessly. The printer works fine initiall from the affected computer but then after some variable amount of time computer seems to lose network connectivity. The driver installed is HP Photosmart C309a series (61.81.634.0). Thanks in advanced.

There are a few things to check.
First, is your security software getting in the way, here? Disable it to test.
Second, have you downloaded this firmware patch for your printer?
Third, did you install this software?
We'll go from there...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

PDFs will not print on HP All-In-One C309a

PDF files and only PDF files will not print on my HP Photosmart Premium All-In-One C309a. I can not print PDFs that are online or that are on my hard-drive. I sometimes use the 'print to XPS file utility' and then open and print the XPS file with no problem.
When I try to print a PDF file, the printer makes all the noises it makes when printing normally, but does not print. The viewing winding says "Now Printing", a piece of paper cues up, the audio cue plays meaning job completed and eventually a blank piece of paper comes out.
I am using Windows XP with Service Pack 3.
FreddieVee

Is your printer still in warranty? You can check with HP's warranty tool here.
The printheads in the Photosmart 6510 are not removable. I will ask to have an HP support agent to look in on this thread, they may be able to suggest some further troubleshooting.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP all in one C309a: Error message: Wireless Radio is not functioning. Contact HP support

Today all of a sudden, a 2 year old HP Photosmart C309a All-in-One printer is not longer connecting to my local Wireless Home Network. There is no change to network configuration to the TLink 3000 hub that I was using. All other clients (Mac OX, Vista, Ubunta 11.1, various versions of iOS and Android Icecream Sandwich) have no problem connecting to the same hub. No change to the network configure on the Printer. The machine have been standing as a stand alone machine and connected wirelessly to the network since day one in the corner of my office. Its within range of my router. I ran Wireless Network Test report to see what's going on. The title says "The Wireless Radio is not functioning. Contact HP Support" . Any number of reboot cycle didn't help. Out of frustration, I press "reset back to Factory Setting" on the printer. I did that, and then press "Wireless Network Wizard", and it was on "Searching for Wireless Router" forever... What opinions do I have? Get a new printer? or use good old 10-base T network cable to hook up the machine?

My HP C309a had exactly the same problem. Everything I found on the internet said that the printer could not be fixed and the only solution was to buy a new printer. The printer report said the wireless radio was not functioning. A factory reset did not fix the problem either. I had a problem with my HP Pavilion dv6000 laptop with the video graphics IC. The solution for that fix was to do a solder reflow of the graphics IC. Did it and fixed the problem. I figured maybe the same fix would work on my printer as I didn't have anything to lose at this point. I located and removed the wireless radio board in the printer (on the left side upper right corner). I then did a solder reflow on BOTH sides of the board. I put the board back into the printer and wa-la, it connected immediately to the network. It has been functioning with no problems now for at least four weeks now (knock on wood). Hope this helps.

HP Photosmart all in one c309a, trying to download driver/software for windows 7

I have a HP touchsmart 600PC windows 7 64bit AND a HP Photosmart Premium c309a printer/all in one. The Photosmart operating CD is not compatible with windows 7 so it said to go online to download the software and driver. I did this and the scanning and copy option didn't work. Sometimes things would print and sometimes they would not. I frequently got a message saying driver not installed. I uninstalled everything just to try again. I noticed on the website that it says it would have a basic and full feature driver. The only one available is the basic driver which I had already done, and with further attempts, noticed that the basic does not allow the scanner, copier, printer to function to it's full potential. The problem is, there is no full feature option on the page. What should I do? It says it is compatible but I am starting to wonder if I need to take the new printer back.

Did you upgrade this computer from Vista? If so, there is a patch to correct a similar issue. It is on the same page as the basic drivers.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Wireless Setup on HP Photosmart All in one (C309a) Printer

I have recently purchased a HP Photosmart Premium (c309a) All in one Printer and have had ongoing issues installing it with Wireless connectivity. The first of the problems are that while the printer itself initially detected the wireless router it drops this connection once in idle or on startup, and it does not automatically detect it the next time. Infact I have had to manualy input the SSID and WEP/WPA passphrase as it has more often than not been able to detect the router again by iteself. This is very painfull and a real turnoff. Secondly, when installing the provided SW the printer isn't detected when scanning for wireless devices and is not found when manually typing the SSID. This occurs even when the printer says it detects the router.
Troubleshooting - Where to start um.....ok I have done the obvious things - power cycle the printer, router and PC. No go. Also downloaded the latest SW from the HP website (as opposed to the CD provided) and resintalled - No go. Also disabled start up programs in msconfig and added the required exceptions and ports to the Firewall and resintalled - no go. The only thing I haven't tried is manually configuring the IP Address, Subnet on the printers advanced settings and matching it on the PC-Printer settings. I found this process ridiculously time consuming and frustrating and would hate to think what the average user would do in this case. Hardly a simple user friendly process. I have since reverted to connect via ethernet just to get it operational (and before I throw it out the window) nevertheless would appreciate some assistance as the wireless feature was one of the reasons I bought it in the first place.

I am using a Motorola SBG900 Wirless Surfboard Gateway - supplied with Bigpond Cable. It is set to be using WPA security and have never had a problem with it before whilst connecting any wireless devices such as a laptop, PDA etc.
My feeling is that the wireless functionality of this printer needs some serious work before the next release. And furthermore they should never have released it the way it is as it wouldn't pass 5% of user acceptance tests if using wireless. There are too many complaints on this forum and others about similar problems to suggest that I am not by myself here. Dissapointing considering this is the feature that would be at the top of the list of most purchasing this model. It lets down what could of been a vg printer.
I agree, I think if I want to get this printer working on a wirless network, I will have to set the IP address manually. The problem is the printer refuses to connect to the router now even after it connected a few days ago with no intervention. I have powered down both the router, PC, and printer without any luck yet. I will set the IP address manually first on the printer and see how it goes, then if it connects will see if the PC/router can see the printer during the SW install procedure which has failed >10 times to date.
For now I think I will stick with Ethernet as it is no doubt much faster anyway and will try the wirless setup again in a few days when my patience grows back. Does anyone know differences in speed between USB/Wireless/Ethernet? I know this is dependant on a number of things but just interested in ball park figures here.

HP Photosmart all in one C309a printing multiple copies when its set to print only one copy.

having issues with my C309a its now printing multiple copys when its set to print only one copy.it started doing this 4 days ago and its happening on both my Windows 7 64 bit computer and my Vista 32 computer that both have the latest release drivers already installed need help.HP please sort this issue out.still under warranty do i have to return it?

I am using a Motorola SBG900 Wirless Surfboard Gateway - supplied with Bigpond Cable. It is set to be using WPA security and have never had a problem with it before whilst connecting any wireless devices such as a laptop, PDA etc.
My feeling is that the wireless functionality of this printer needs some serious work before the next release. And furthermore they should never have released it the way it is as it wouldn't pass 5% of user acceptance tests if using wireless. There are too many complaints on this forum and others about similar problems to suggest that I am not by myself here. Dissapointing considering this is the feature that would be at the top of the list of most purchasing this model. It lets down what could of been a vg printer.
I agree, I think if I want to get this printer working on a wirless network, I will have to set the IP address manually. The problem is the printer refuses to connect to the router now even after it connected a few days ago with no intervention. I have powered down both the router, PC, and printer without any luck yet. I will set the IP address manually first on the printer and see how it goes, then if it connects will see if the PC/router can see the printer during the SW install procedure which has failed >10 times to date.
For now I think I will stick with Ethernet as it is no doubt much faster anyway and will try the wirless setup again in a few days when my patience grows back. Does anyone know differences in speed between USB/Wireless/Ethernet? I know this is dependant on a number of things but just interested in ball park figures here.

Photosmart premium all in one c309a wireless radio indicater is on, but won't recognize network

Using a windows 7 Dell laptop with my printer and it's been working fine. Suddenly, my wireless indicator on the printer is on, but I can't get the printer to recognize the network at all, and obviously can't print from my Laptop wirelessly. Works fine by USB. I have run all of the diagnostics tools on the hp website, to no avail.. The printer is only 18 months old - Hate to toss it out just for this! Any ideas of how to fix this? I've reset the router, hard reset the printer and followed all of the diagnostic steps. I'm baffled!
This question was solved.
View Solution.

Yes. Turn the printer off, hold the # and 6 keys while and a bit after turning it back on. The printer will reset. If this does not work you could try the same thing with # and 9 keys, but I doubt it will do any better.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HT1338 I have updated my new MacBook Pro for HP Photosmart All-in-One, but it still will not scan - it will print, but will not scan. How can I fix this?

I have installed the updates for my HP Photosmart All-in-One c309a. It prints, but will not scan. Tells me to update - I did that, but still won't scan. Any suggestions to make the scanner work?
This all worked perfectly with my old 2008 MacBook Pro.

Have you tried scanning from Image Capture or Preview?
A current driver is shown to be available for Mavericks (auto-downloaded):
http://support.apple.com/kb/ht3669#HP
But many people have found that manufacturer scanning control software doesn't work. They have to use the Apple-provided software.

I have a C309a All in One, how do I use the CD/DVD component to print on a CD?

PRODUCT/SYSTEM: C309a All in One Printer; Windows 7 64-bit;

Hi,
It's a bit long story, page #39 of the following document shows you all:
http://h10032.www1.hp.com/ctg/Manual/c01659847.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have an HP C309a all in one Photosmart. When I go to print on a Printable CD It only prints on 1/2

I have an HP C309a all in one Photosmart. When I go to print on a Printable CD. It only prints on 1/2 Right side of disk. Why?
I am using PS23 and used the label format for making the copy I wanted to print on printable disk.
Herman

HI,
You should be able to just leave it on, it should have a sleep mode which it will enter after a while.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

HP Photosmart Premium all in one Printer c309a series

I am having and have had numerous problems with this product since the beginning and have communicated with HP and also have used the HP solution and also the HP installation process but sometimes with success but none to date, I have a Touchsmart 300 computer and a HP Laptop but the printer will not work on either one.
The following problems exist, error message Wireless Radio not working but I have tried to connect with the USB and also with the Ethernet but to no avail before I trash it maybe some body has a solution.
HP Photosmart Premium C309a series all in one.
Serial # {Removed for privacy}
Ron Sgro
e-mail{Personal Information Removed}

Try resetting the printer two different ways:
1. From printer screen, press Setup > Network > Reset Network Defaults.
2. Turn off your printer, hold # and 6 keys while and a bit after turning it back on.
Show support by clicking the blue Kudos star in the post that resolved your problem. Doing so will help other forum members find their solutions too.

Hp all in one c309a

Similar Messages

Maybe you are looking for