HP and Samsung Compatibility

Please help me if you can
hi there I need help please, I just bought a new HP Pavillion 17 notebook PC with windows 8, and a HP Photosmart 7520 before I open the boxes can you please tell me if they are compatible with my Samsung s4 and tab2? I can take them back to the store as long as the boxes are not open. This is the 4th printer I have bought and hopefully the last. I already have ePrint app downloaded on phone and tab2 and I have wifi also.

Hi there, I can tell you that the Photosmart 7520 supports printing from Samsung mobile devices using the ePrint app you have downloaded. In fact if the S4 phone has the latest KitKat version of Android OS it has a native printing function that means you don't even need to use the app. Take a look at his link for more details on printing from Android mobile devices with HP http://www.hp.com/united-states/campaigns/mobility/#android-tab
In relation to the Pavilion notebook, I'm not altogether sure I understand what you mean by asking if that is compatible with the Samsung devices. Can you clarify further?
Hope this information helps.
Best
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Similar Messages

MacBookPro5,1 and Samsung 840 SSD

Hello all,
i have a MacBookPro5,1 and used a Intel X-25 for years.
Now i upgraded to a new Intel 520 and ran into massive compatibility issues. As i know there was a MCP79/Sandforce SF-2281 issue.
To prevent same issues with my next upgrade i want to ask if there any known issues about MacBookPro5,1 and Samsung 840 SSD?
btw. the x-25 ist reported and negotiated with 3gps and works like a charm.

Your issues were probably because of the crap SandForce controllers. Worse thing you can do is buy an SSD driven by those chipsets. The 840 Pros are nice but the 840 should be fine as well. Just be aware that the write speed isn't as fast on those.

Mac Mini and Samsung 43" DLP HDTV gets Black Screen Only

Just bought a new Mac Mini with great anticipation for some large screen viewing.
After numerous attempts the Mini has yet to produce anything but a black image with the occasional red or white horizontal line on my 43" Samsung DLP TV. Not even a brief grey start up screen. Just permanently black.
Here's the kicker: I do get a great computer screen image on this 43" DLP TV in Mac OS 8.6 off my ten year old Macintosh PowerPC. (The trouble is it's a noisy older computer and has no bluetooth for wireless mouse & keyboard: and no Front Row with remote control)
I have the VGA cable connected to the "computer in" port on the back of the Samsung DLP TV .
This is with the exact same cable and connection that refuses to work with the Mini.
Earlier attempts at using the DVI port were unsuccessful so for now I am staying with what works on the older Mac.
Some other things I've tried:
-with my Mini hooked up to a 17" CRT Samsung monitor I have tried all available resolution settings at 60 Hz, reconnecting to my large screen Samsung each time, producing nothing but the black screen.
I've tried turning the TV on before the Mini and vice versa
I always check to make sure the PC connection is selected on the TV
As well, I have re-installed the OS onto the Mini to eliminate any possibility of a sofware conflict from data transferred from my Emac
After consulting an Apple technical page (article 303406) regarding Black Screen issues and Mac Mini on large screen HDTVs, I went into single user mode and changed some text as specified. That did't help either
So far I have never seen a grey startup screen at all, only a totally black screen.
Someone in a recent post here or on MacMini.com touched on impedence issues with signals into VGA or DVI ports. The Mac Mini operates on low voltage. Could there be some connection to how strong a signal it produces compared to my old PowerPC with its ATI graphics card?? And just why would that make a difference
I haven't seem my particular issue addressed in this forum or on MacMini.com
Thanks for any help
Mac Mini 1.83 Intel Core Duo 512 Mb Ram Mac OS X (10.4.7) Emac; 604e PPC with G3 Upgrade & ATI Video Card

Just finished testing the Mini remotely with the use of the Redstone software recommended by BSteely in a previous post. Fun Stuff.
I saw the Mini "desktop" on my Emac screen and could control it remotely, even though the mini was connected to the large screen Samsung.
But the "fix" did not progress from there. When I called Apple for further help they were not able to help me tweak my Mini. Apparently there was nothing to tweak.
A second level Apple technician finally told me (after a few calls to both Apple support and Samsung) that this Mac Mini is likely not capable of producing a screen image on my large screen Samsung.
He said the Mini supports "Coherent Displays up to 154 Megahertz and Non Coherent displays up to 135 Megahertz". On his recommendation I checked with Samsung (second tier) and they are not sure exactly what that means. Same here.
Samsung did reply that the "pixel clock (of this HDTV) is 74.2 Megahertz". Again, too technical for me.
The latest second tier Apple guy just told me said that my Samsung 43" DLP is probably not compatible with the output capability of my Mac Mini.
Bottom line
It's all about the output capabilities of the Mini's "Intel Extreme Graphics GMA
The Mini's video output is not upgradeable like the other mac which works with this HDTV.

New Mac mini and Samsung Tv

Dear all,
A little help please. I have just purchased a mac and mac mini. I would like the I Mac to run as the master and the mac mini to work on the tv downstairs.
The mac mini works when connected to a monitor however when I try to connect it to my tv my screen is black.
I am currenlty trying to connect via pc connector lead as there was nothing else in the store so I am connecting via mini dvi adapter to DVI cable to female connector to pc slot in the back of the tv!
And its not working.
I have downloaded chicken of the VNC onto the I Mac and have installed some program called Display config X. however whenever I plug it in it doesnt seem to want to play.
Any thoughts or should I abandon the pc connection on the tv!

I have a mini connected to my Samsung.
I have a miniDVI to DVI adapter that came with the computer linked to a DVI to HDMI cable.
I've since learned you can buy a miniDVI to HDMI cable, thus eliminating the need to the connection, which is probably a good thing.
In any case, if you can go into the HDMI slot instead of the PC slot, you will likely have better results.
This is my second Samsung TV. The first one actually had a DVI in to begin with. But it was smaller than my iMac screen, and I needed binoculars to read it from across the room.
I also had to do an adjustment to get the menu bar to display properly. It was a rescan or something. Search the forums for my name and Samsung and you will find it.

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
"The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
Thanks!!

I was able to get it to work using your instructions off of here and your other thread
Thank you!
Chris
http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

New cdx g1050u not recognize usb and samsung s3

new cdx g1050u not recognize usb stick (not a sony usb stick) and samsung s3

The CDX-G1050U Car Stereo is a Latin American model. Please reach out to Sony Mexico Support here for further assistance. Thanks!
If my post answers your question, please mark it as "Accept as Solution"

MINI DVI-DVI and Samsung 40A656 give nasty image

Hooked up like this I do have the right resolutions but the quality of the image is not very good. The display shows get characters with small lines under them also for instance the red, yellow en green buttons on top of MAC OS Windows are very rough. Let alone shadows etc.
Any idea's how to solve it ? Of course my Apple dealer blames Samsung and Samsung blames the apple!
Though I must say that I had a Mini '07 for a couple of weeks in januari and that one displayed fine...
So right now I am back to VGA which is seemingly better than DVI. A bit odd isn't it ? All cables are of normal 1,5M length
The Samsung rep. by the way mentioned a MAC driver to solve the problem "since the Samsung is a Microsoft aimed TV and should be fooled by some driver on the MAC to get things right..." (...unquote) Unfortunately he could not be more specific than that!

I see others do have the same problem as well...
http://discussions.apple.com/thread.jspa?threadID=1949249&tstart=0

IPhoto 6 and Camera Compatibility

I recently upgraded my OS to 10.5.8 from 10.4... I know very late. I had no intention until the upgrade to my iPhone 3GS required it. Regardless, I am running IPhoto 6.0.6 and it has worked fine. I own a Canon T1i EOS Rebel digital camera. Up until the conversion to Leopard, I would plug the camera into the port and iPhoto would open up and transfer the pics without an issue. Today, I tried to upload pictures, the USB cord was secure on both sides and nothing happened. I turned the camera on and off twice to see if by starting it up connected would change things, nothing did. I ensured that the battery is charged in the camera and that the sleep setting was not tampered with thus not allowing it to transfer.
I am suspicious about the upgrade to Leopard causing this incompatibility issue with my camera. When I did a search on the apple website, the page about iPhoto 6 and camera compatibility is a dead link. So a couple of questions if someone would be kind enough to help me out with:
1) Is the import of pictures not occuring because of an incompatibility issue between my camera and iPhoto 6 suddenly? Or is incompatibility between 10.5.8 and iPhoto 6?
2) What is the best solution? Upgrade to iLife '11? Or will that require upgrading to Snow Leopard as well? Or is it better to buy the $129 bundle of Snow Leopard, iLife and iWork for compatibility issues?
3) Lastly, is there a webpage on apple that shows these compatibility issues? For instance, if I upgrade one thing in the future, all the other software suites that need updating as well?
Thanks in advance to whomever can help me.
Cheers,
-Tod

1) Is the import of pictures not occuring because of an incompatibility issue between my camera and iPhoto 6 suddenly? Or is incompatibility between 10.5.8 and iPhoto 6?
Neither. The usual cause for this issue can be a damaged plist file, a setting on the camera or Mac or minor directory damage on the card.
Plist file: Can you access the card with Image Capture (in your Applications Folder)? If so, you might try trash the iPhoto plist file, if not try trash the Image Capture plist file as well.
Settings: What's set to happen when you connect the camera? With iPhoto 6 that's in the Image Capture. Your camera has two modes for talking to the Mac: Mass Storage and PTP. What one are you set to? Try the other one.
Directory Damage: Have you tried using a USB Card Reader? Can the Mac see the card in that?
Regards
TD

Info regarding Diswarrior 4 and Leopard compatibility

I emailed Alsoft regarding Diskwarrior 4 and Leopard compatibility. Here is the response I got.
+DiskWarrior 4.0 will successfully rebuild a disk that has Mac OS X 10.5+
+Leopard installed or a disk that has been attached to a computer running+
Leopard.
+However, some operating system functionality has changed within Leopard+
+itself. As such, there are some compatibility issues when running an+
+installed copy of DiskWarrior 4.0 while started up from Mac OS X 10.5+
+Leopard. Alsoft currently recommends that you do not run DiskWarrior 4.0+
+while the computer is started from Mac OS X 10.5 Leopard.+
+Instead, to run DiskWarrior, you should start up the computer from either:+
+1) A DiskWarrior 4.0 CD.+
+2) Any disk that starts up in 10.4.x and then run DiskWarrior 4.0.+
+An updated version of DiskWarrior that has complete Leopard+
+compatibility will be released soon as a free download for existing+
+owners of DiskWarrior 4.0.+
+-- What you can expect when running DiskWarrior 4.0 under Mac OS X+
+10.4.x and rebuilding a Leopard disk.+
+All features work as expected with one exception: FileVaults created+
+while started from Leopard are not visible to DiskWarrior 4.0 and cannot+
+be rebuilt (repaired).+
+-- What you can expect when running DiskWarrior 4.0 under Mac OS X 10.5+
+and rebuilding a Leopard disk.+
+While not recommended (and discouraged), if you do run DiskWarrior 4.0+
+while started from Mac OS X 10.5 you might encounter some problems such as:+
+1) There is a lengthy delay whenever DiskWarrior is determining which+
+drives are currently attached. This delay is dependent upon the number+
+of attached drives and may last up to 2 or 3 minutes. You will+
+experience this delay when first starting DiskWarrior, whenever a disk+
+is attached or detached while DiskWarrior is running but idle, and+
+whenever a rebuild is completed or canceled.+
+2) You cannot rebuild FileVaults or disk images.+
+3) In step 9 (comparing directories) of a rebuild, the progress bar+
+might get to 100% even though the comparison step is not finished.+
+4) When performing Check All Files and Folders the progress bar might+
+get to 100% even though the check is not finished.+
+5) After rebuilding a disk, DiskWarrior may report that some files or+
+folders have had their permissions changed. This is inaccurate and the+
+permissions have not been changed.+
+To repeat, an updated version of DiskWarrior that has complete Leopard+
+compatibility will be released soon as a free download for existing+
+owners of DiskWarrior 4.0.+
+-- What about DiskWarrior 3?+
+DiskWarrior 3 and earlier versions are not compatible with Mac OS X 10.5+
+(Leopard). Alsoft does not recommend running DiskWarrior 3 or earlier on+
+a disk that has Mac OS X 10.5 Leopard installed or a disk that has been+
+attached to a computer running Leopard.+
+-- Marc+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Marc Moorash, Alsoft Technical Support+
+Email: [email protected]+
So, it seems it will work but you need to run it from the disk or if you have it installed on a external drive running Tiger, it will work.
Thom

If you open your Tiger Address Book, select all cards, drag them to the desktop, it will make one big "mega-VCF" card with a name like "Alan Adams and 543 others.vcf" Dump that to a flash drive or email it to yourself, then doubleclick on it on the Leopard machine. They will all import just fine into your Leopard Address Book.
Try doing something similar with your iCal data, Open the application, choose your calendars one at a time, and select File > Export. That should make a big "mega-ics" calendar card with a name like "work.ics" or "home.ics, i.e., "originalcalendarname.ics" with all the events of that calendar. Then same drill: dump that to a flash drive or email it to yourself, then doubleclick on it on the Leopard machine.
Both generation methods create text files, which should import just fine into the Leopard applications.

Profile for Sony DSC-P200 and Samsung NV24HD created

Hi,
just started plying around with LPC and create a profile for my old pictures from the Sony DSC-P200 and Samsung NV24HD.
I have uploaded/emailed them to Adobe, so they should show up in the near future.
br
Beholder003

Hi simonsaith,
Is it the Samsung NV24HD (Samsung 4.3-15.5 mm F2.8-5.9) profile that you added?
Yes, that's it.
In the camera make drop down, if you type in "samsun" (which will trigger ALPD to do a wildcard search that matches any make that contains "samsun", your profile will actually show up. This is because the camera embedded "SAMSUNG TECHWIN" as the camera make for the EXIF.
Thanks for telling me. I would not have expected that I can do a wildcard search in a dropdown field there. I suggest making this more obvious in a next software version. I bet very few users are aware of it.
The naming things has some more traps. The built in lens' maker is actually called "Schneider-Kreuznach", but LPC seems to have issues with double names and creates a "Schneider". That's why I renamed it to "Samsung" to keep it in an existing group. I hope future software versions can cope a little better with this.
This seems similar to the behaviour when I put in "Carl Zeiss Vario-Tessar ..." into the Sony DSC-P200 lenstype.
That special camera actually is also even more difficult for LPC when it comes to the model type. I did shorten it in the profile. The model is given as "NV24HD, VLUU NV24HD, LANDIAO NV106HD" which is a little clumsy when used as profile name.

Printer communication issues?: HP P2035 P1606 P1102W and Samsung CLP-315

Dear Common Wisdom:
Has anyone had problems communicating with any of these printers?
HP P2035 P1606 P1102W and Samsung CLP-315
After three hours with tech support on the phone we could not get my MacBook Pro to communicate with the Lexmark E360D. They suggested I return it!
Thanks in advance for your comments.
CJ

"After three hours with tech support on the phone"
Apple, HP & Samsung?
Please detail all the things you have done in the way of troubleshooting. This will eliminate the +"been there, done that"+ scenarios when the knowledgeable users here try to help you. Thank you.
Have you tried the Gimp drivers?
!http://i50.tinypic.com/izvwo1.gif!

Application error in motorola and samsung

hi all
I am creating an application in which i am using map image which is abut 85 kb its working fine in nokia 7370,nokia e60,nokia n72. but an application error is comming in motorola l7i and samsung u600.
i have worked alot in this application and i found that these devices are not accepting the size of png (85 kb) i dont know i am right or not . i want to know that is there any restriction for size of png in application . i have searched for this but couldn't find any about this.
can anybody help me out for this
thanks

hi guys I got the same error but i solved using Scaling the image. Since scaling is not possible directly in j2me i got some code from this forum. The code is like
package scaleImage;
import javax.microedition.lcdui.Image;
public class ScaleImage {
    public ScaleImage() {
    public static Image scale(Image src, int width, int height)
          long start = System.currentTimeMillis();
          int scanline = src.getWidth();
          int srcw = src.getWidth();
          int srch = src.getHeight();
          int buf[] = new int[srcw * srch];
          src.getRGB(buf, 0, scanline, 0, 0, srcw, srch);
          int buf2[] = new int[width*height];
          for (int y=0;y<height;y++)
               int c1 = y*width;
               int c2 = (y*srch/height)*scanline;
               for (int x=0;x<width;x++)
                    buf2[c1 + x] = buf[c2 + x*srcw/width];
          Image img = Image.createRGBImage(buf2, width, height, true);
          long end = System.currentTimeMillis();
          System.out.println("Scaled "+src.getWidth()+"x"+src.getHeight()+" in "+((end-start)/1000)+" seconds");
          return img;
}Its very clear in motorola that some models will not support the image bigger than the canvas and thus throws NullpointerExp. So to avoid that ,this scale method gets the image, canvas width and height as params. The image is scaled to that resoln. Hope this may help u

Seagate ST9750420AS HDD and W700ds compatability issue

There seems to be a compatability issue with the Seagate 750GB drives (ST9750420AS) and the W700ds (and possibly other W series notebooks).
With the controller set to RAID in BIOS Windows 7 and possibly other OSs can not access the HDDs. This configuration results in a 7B "inaccessable boot device" error BSOD.
Testing revealed only the ST9750420AS with FW 0001SDM5 (the only FW avaible) results in the 7B BSOD regardless of the RAID driver version installed. I have not phiscally removed the Turbo memory device to see if it plays a role in the problem or not.
The W700ds (2757) system I have available to test is compatable with the following Seagate (drives with various FW versions):
ST9160823ASG
ST9500325AS
ST9500420ASG
ST9500420AS
ST9640320AS
These were tested with Widows XPP 32bit, Windows 7 64bit and Linux 64 bit, these were tested in both RAID and non RAID configurations.
And not compatable with:
ST9750420AS, tested with Windosw 7 x64 in RAID configuration.
Any comments, corrections or resolution welcom.
Thanks
JMG

Hi Jamessts,
Welcome to the HP Forums!
I have read your post on installing your HDD to your HP computer, and I would be happy to be of assistance!
To determine your product specifications, I will need to know what the Product and Model Number of your desktop is. The next piece of information I will need is the version of Windows you have on your computer.
Since you stated that the HDD works in another computer, I suggest following this resource: "Windows could not complete the installation..." solved by MarkBeacom. This should help in setting up your HDD for use on your computer.
Please post back with the results of your troubleshooting, and I will diligently follow up with you!
Cheers
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

[solved] Dependency hell with redland and redland-compat

It seems that redland and redland-compat are in conflict, but both are required.
I notice that the installed version of redland-compat provides redland, but the new version does not.
$ pacman -Qu
redland-compat 1.0.12-1
skype 2.1.0.81-5.1
$ sudo pacman -Su
:: Starting full system upgrade...
warning: skype: ignoring package upgrade (2.1.0.81-5.1 => 2.2.0.25-1)
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: audacity: requires redland
:: libreoffice: requires redland
$ sudo pacman -S redland
resolving dependencies...
looking for inter-conflicts...
:: redland and redland-compat are in conflict. Remove redland-compat? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: redland-compat-storage-virtuoso: requires redland-compat
:: soprano: requires redland-compat
Last edited by jlindgren (2011-04-28 03:41:39)

sl1pkn07@sL1pKn07 pacman.d]$ yaourt -S redland
Contraseña:
resolviendo dependencias...
verificando conflictos...
Objetivos (2): rasqal-0.9.25-1 [0,22 MB] redland-1.0.13-1 [0,18 MB]
Tamaño total de descarga: 0,00 MB
Tamaño total instalado: 3,44 MB
¿Continuar con la instalación? [S/n] s
(2/2) verificando la integridad de los paquetes [---------------------------------------------------------------------------------------] 100%
(2/2) verificando conflictos entre archivos [---------------------------------------------------------------------------------------] 100%
error: error al realizar la transacción (archivos en conflicto)
redland: /usr/lib/librdf.so.0 existe en el sistema de archivos
redland: /usr/lib/librdf.so.0.0.0 existe en el sistema de archivos
[sl1pkn07@sL1pKn07 pacman.d]$ yaourt -Qo /usr/lib/librdf.so.0
/usr/lib/librdf.so.0 es propiedad de redland-compat 1.0.12-3
[sl1pkn07@sL1pKn07 pacman.d]$
sorry. menssage in spanish

HP and Samsung Compatibility

Similar Messages

Maybe you are looking for