HP B110a driver wont install

I have Windows 7 and a B110a printer. Since the lap top needed to be wiped I cant reinstall the driver to the printer. I get to where it is "checking the system" and then just stops.
This is really frustrating and if it means that I have to buy a new printer it will definately not be HP. I've had problems with this printer since day one and this is just the icing on the cake.
Any help would be appreciated

Welcome to the forums! I hope you are well
I saw your post about having to reinstall your Photosmart B110a printer however, you are having an issue doing so on your Windows 7 system. I will gladly help where I can and hopefully the frustration will dissipate!
First, test the unit itself. Make a copy or two. If the printer copies fine, the printer is fine and the issue is more software related.
If the copies are good to go, try disabling your firewall and then running the installation. There are two methods you can use to install your printer.
1. HP Printer Install Wizard for Windows
2. HP Photosmart Full Feature Software and Drivers Download
If the installation is not successful, try a Clean Boot and run the installation again.
Keep me updated with your results so far and I will check back on our thread!
Happy Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Windows 8 (64) Intel HD 4000 driver wont install on x230t

I have installed all the up-to-date drivers on my x230t running Windows 8 (64), but for some reason this one gives me an error:
"The setup program failed to install one or more drivers. Setup will exit"
Here is the driver for Version 9.17.10.2828
http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS030728
I downloaded the one directly off the Intel site for their 4000 Graphics chip for windows 8, but its an "older" version.
Any ideas on how to get the newer driver working?
Thanks in advance

You have to disable driver signature verification, because these drivers are not digitally signed.
Go to settings-> change pc settings-> general-> advanced startup to get to the boot menu where you can do this.
After the boot menu appears:
Troubleshoot-> Advanced options-> Startup Settings-> Restart
After the new boot menu appears:
Press 7, disable driver signature enforcement.

Power Management Driver wont install in Windows 7

Hi All, I've been trying to get my blue Fn keys to work on my recently purchased SL500. Volume and screen brightness keys work (but no on-screen display), however Fn+F3 & F5 do nothing, as does the blue ThinkVantage button. Installed drivers via System Update, however every time I get the message "Package did not install - ThinkPad Power Management Driver for SL Series". Power Manager is installed and running but the driver is not listed under Program & Features. I'm guessing the lack of this driver is the problem. Anyone else seen this or have a fix ? Thanks.

Please visit: http://support.lenovo.com/us/en/downloads/ds014985 but don't download the most current version (3.89.0100) at the top. If you look at the readme, you'll see that the SL500 is not included in the supported systems list.
Instead, scroll downwards to the version table and have a look at the readme for v3.88.0000. You'll see your machine in the supported list, so you could give that one a try, if you want.
Regards.

Driver wont install thinks Im not an ad

I rebooted my OS (windows xp home) and am reinstalling all my software.
When I try to download the driver for my Zen Xtra jukebox, I can download it, but as I start to install, it tells me I don't have access to make the changes, tells me to rerun the install with admin privilegs. The problem is that I do have admin privliges in my profile.
Any have ideas?
thanks

Are you THE administrator?
Because if you're not THE administrator but rather part of the administrati've group, there may be some NTFS rights or GPO's that are priorized over the administrati've group's rights.Message Edited by Prosis on 05-06-2006 05:48 AM

Power Management Driver wont install - SL500, Windows 7

Hi All, I've been trying to get my blue Fn keys to work on my recently purchased SL500. Volume and screen brightness keys work (but no on-screen display), however Fn+F3 & F5 do nothing, same with the blue ThinkVantage button. I've installed the drivers via System Update, however each time I get the message "Package did not install - ThinkPad Power Management Driver for SL Series". The version number is 1.44. Power Manager is installed and running but the driver is not listed under Program & Features. I'm guessing the lack of this driver is the problem. Anyone else seen this or have a fix ? Thanks.

Please visit: http://support.lenovo.com/us/en/downloads/ds014985 but don't download the most current version (3.89.0100) at the top. If you look at the readme, you'll see that the SL500 is not included in the supported systems list.
Instead, scroll downwards to the version table and have a look at the readme for v3.88.0000. You'll see your machine in the supported list, so you could give that one a try, if you want.
Regards.

HP Photosmart c4700 driver wont install on windows 8.1

I am trying to install my HP Photosmart C4700 All in one printer to my lapton. I have Windows 8.1 and its not letting me install it. Could you Please help me.

Hi BellaBaby,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some issues when attempting to install the printer on to your Windows 8.1 computer. If you are connecting the printer to the computer with a USB cable, please make sure the cable is Disconnected while doing the installation.
Please click on the following link for the HP Photosmart C4700 All-in-One Printer series Full Feature Software and Driver.
Save the download to your Desktop so that it creates it's own Icon. This will make it easy to find the download. Click on the Icon and follow the instructions. Please do NOT connect the USB cable until the installation prompts you to do so.
Please feel free to write me back if you have any other questions.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

IPhone 6, iOS 8 - Apple Mobile Device USB Driver wont install

Ive just purchased an iPhone 6 from the Apple store. Of course because its the latest model its running the latest iOS (iOS 8.0).
I tried connecting it to my computer with the included USB lightening cable. My computer attempted to install the driver and then the error message appeared "Apple Mobile Device USB Driver install was not successful".
I have tried another USB port. I also tried a solution from a previous similar topic on the Apple discussion threads that suggested uninstalling iTunes & the 3 Apple software additions: Apple Application Support, Apple Software Update, Apple Mobile Device Support.
Once the above software was uninstalled i connected my iPhone6 via USB to my computer and device manager read it fine. I assumed my issue was resolved so i continued to reinstall iTunes once again. Once all complete i connected once more and the original error reoccurred.
Is this an issue with just iPhone6 models, iOS8 users or is there an underlying problem?

OK. I found my answer, thanks to another posting.
Uninstall iTunes
Uninstall Apple Software Update
Uninstall Mobile Device Service
Uninstall Bonjour
Uninstall Application Support....all in this order.
Clear everything from Trash.
Restart PC
Install latest version of iTunes.
It worked!

Cannon printer driver wont install

I cant get my cannon d420 image class printer to in install on my new computer running windows 7

Are you running Windows 7 x86 (32bits) or x64 (64bits)?
You should be able to get the drivers from this website: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_d420#DriversAndSoftware
Select your operating system (To find it, Open the start menu, Right-Click on My Computer, select Properties. The system Type will tell you if you are 32 or 64 bits)
Select the driver package and download it. For installation instructions, follow the website:
*Precaution When Using a USB Connection
Disconnect the USB cable that connects the device and computer before installing the driver.
Connect the USB cable after installing the driver.
Driver and application software files have been compressed.
The following instructions show you how to download the compressed files and decompress them.
1. To download files, click [I Agree-Begin Download] icon, select [Save], and specify the directory where you want to save the file. Click [Save] to start the file download.
2. Downloaded files are saved in the specified folder in a self-extracting format (.exe format).
3. Double-click the files to decompress them. A new folder will be created in the same folder. The new folder will have the same name as the compressed file.
4. Double-click the decompressed Setup.exe file to start installation.

Driver wont install!

can someone please help me. i am having difficulty in installing the driver for the DKU-5 connectivity adapter cable driver for my nokia 3220. When i think i have installed it it says " not a valid win.32 application"..... does anybody know what this means and how to tackle it. i have also tried downloading one but had difficutly as well,
much appreciated , thanks

What version of Windows on your PC (Windows 95? Windows 98? Windows ME? Windows NT? Windows 2000? Windows XP?)?
When you say "tried downloading one but had difficutly as well", do you mean that you had problems downloading, or that you downloaded OK but had trouble installing?
Which version did you download and from where (URL)?

Here Drive+ wont install on lumia 620

Hi,
I just recieved my new Nokia Lumia 620
On the menu I have the car icon. When I press it it gives me a new screen titled Nokia Drive.
Then at the lower left corner I have a button go to store.
When I press that I go to the store, I get the details of HERE DRIVE+ but in the middle of thescreen it tells me:
"This app is not available for your device
Please help
Jan

I have encountered the same problem with my new Lumia 820. I have bought it to have access to the application. Has anybody heard about any official response to this issue from Nokia? When will it be available? Or, is there any solution? Thanks.

Zen 4GB Driver Wont Install Prope

When I try to install the drivers for my new Zen 4GB in Windows XP SP2 (with WMP Version ); I get the message when Widows is trying to install the drivers for MTP device. "the specific service does not exist as an installed service". I have the Zen installation CD in the dri've as requested and all of the required Zen software installed. I checked the Device Manager and found the Zen device as recognized but with the big yellow question mark and the advice to reinstall the drivers. I tried to reinstall the drivers like before and experienced the same problems as before. Note installation failed the first time as I had purchased a faulty player. I have uninstalled/reinstalled the Zen software 3 times and get the same message "the specific service does not exist as an installed service" when the drivers are being installed. Sync manager, of course says "no player connected" all the time. I also have Creative Sound Blaster Audigy 2 with a host of Creative Sound Blaster releated softare on my system. HELP!!! Lee

Check the thread below http://forums.creative.com/creativel...thread.id=2523

Zen 4GB Driver Wont Install HE

When I try to install the drivers for my new Zen 4GB in Windows XP SP2 (with WMP Version ); I get the message when Widows is trying to install the drivers for MTP device. "the specific service does not exist as an installed service". I have the Zen installation CD in the dri've as requested and all of the required Zen software installed. I checked the Device Manager and found the Zen device as recognized but with the big yellow question mark and the advice to reinstall the drivers. I tried to reinstall the drivers like before and experienced the same problems as before. Note installation failed the first time as I had purchased a faulty player. I have uninstalled/reinstalled the Zen software 3 times and get the same message "the specific service does not exist as an installed service" when the drivers are being installed. Sync manager, of course says "no player connected" all the time. I also have Creative Sound Blaster Audigy 2 with a host of Creative Sound Blaster releated softare on my system. HELP
!!! Lee

Check the thread below http://forums.creative.com/creativel...thread.id=2523

T61 Nvidia display driver unattented install error 2147213312

Hi,
I just downloaded latest Nvidia driver for T61.
But how when i try to install it unattented remotelly to other pc from commant line i get error 2147213312.
Older driver version work ok without errors when installing this way.
Why i must install drivers this way is i use Altiris deployment solution to install drivers to new pcs.
i found solution to this but this must be done by Lenovo driver specialist.
DoInstall Fails to Launch Setup in Silent Mode Description: If you use DoInstall with the "-s" command line parameter to launch a child setup in silent mode, it fails with error code -2147213312. However launching the child setup in normal mode with empty command line string works as expected. Workarounds: Remove all dialogs and user interface from the child setup, or use LaunchAppAndWait to run the child setup. Status: InstallShield confirmed that this is a bug in IS 6.03.
FIXED in IS 6.10. http://www.installsite.org/pages/en/bugs_is60.htm any one know other solutions to install this driver unattented?
Solved!
Go to Solution.

Found solution to this myself.
Seems that latest nvidia driver version is made different version of installshield.
Laters driver wont install if you are trying to install it fron network path like \\server\drivers\nvidia\setup.exe -n -s
You must make script that first copy files to local disk and then install it from there like this:
XCOPY /S /Y "\\server\drivers\nvidia\*.*" c:\drivers\nvidia\
c:\drivers\nvidia\setup.exe -n -s
i hope this helps someone else who is using altiris or similar.
Message Edited by outouser on 04-20-2009 12:34 PM

Itunes wont install GEAR driver

i tunes wont install tried a few times says "unable to install the GEAR driver set at this time The GEARAspiWDM service use by the Gear driver set is scheduled to be deleted during the next system reboot please reboot the system and run iTunes again " any solutions

+"unable to install the GEAR driver set at this time The GEARAspiWDM service use by the Gear driver set is scheduled to be deleted during the next system reboot please reboot the system and run iTunes again "+
With that one, see the following thread from the GEARSoft support forums:
http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452

HT1948 USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.

HP B110a driver wont install

Similar Messages

Maybe you are looking for