Hp beats black screen

I have a HP special edition 15-p058na laptop and it works ok but the problem is that the screen will go black randomly. When it's plugged into the power or not and sometimes when it's been powered on for a long time and sometimes when I've just switched it on. I've noticed recently it's been flickering a little when i'm sing it. If I press the power button and power it down and on again it will work again for a while.
Any one got ideas what this could be? 

Hi there @everytime 
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you seem to have an intermittent issue with your display, or at least something causing the display to go black. I am happy to help with this.
I do need to understand some more about what is happening. When the screen goes black, have you noticed whether the system is running very hot?
Does the screen flicker at all when you move the display, either before or after the screen goes black?
Has this just started happening suddenly, or has it something that has been getting progressively worse?
Please let me know, and any other details you can. For now, maybe one of these pages could prove helpful to you.
Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot
Resolving Problems with Notebook Displays (Windows 7 and Windows 8)
Diagnosing a Liquid Crystal Display (LCD) for Damage
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Similar Messages

  • HP Pavillion Beats black screen

    I keep getting a black screen on my HP Pavillion Beats 15z touch.  My only option is to do a hard reboot to get my pc back.  Is this a known issue? How can I resolve it? 

    Try a hard reset, works sometimes.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Black Screen trying to run Boot Camp (XP) with 10.6.8 on a macbook pro

    running 10.6.8 on a 3 year old macbook pro. boot camp with xp used to work no problem. i played and beat fallout 3 on it. now it gives me a black screen when i boot up. no sound. no flashing cursor. i ran parallels today and it accessed my drive and everything is there. but when i try to boot into boot camp it fails. anyone have any ideas? ive seen all of the advice for people on imacs or running windows 7, etc.
    super bummed. want to play skyrim.
    thank you!
    damian

    something similar has been happening to me for a a couple weeks (even before the most recent update, but now is definitely worse) on my 2010 MacBook Air. Firefox freezes upon startup, and then freezes maybe every twenty minutes or so when I'm actively using it, staying frozen for at least a minute or two. it drives me crazy.

  • HT1414 Could someone plizzzz tell me...I have an iphone4  32G, the problem is a complete black screen I'm unable to reboot it doesn't get picked up by itunes Pc,  direct wall socket charging nothing it is got me.. i have tried everything to no avail.

    I have an iphone4  32G, the problem is a complete black screen, I'm unable to reboot it doesn't get picked up by itunes Pc,  direct wall socket charging nothing happens so it is got me beat?.. i have tried everything but no hope, Has anyone else had this problem? is there a solution, besides having to pay $199 for hardware replacemente... thank you to anyone with info...

    bellaluna59 wrote:
    So let me get this straight if I pay them [Apple Store] $149
    they  will replace my device? Is that correct?
    Assuming it is in one piece and otherwise meets the conditions for an Out of Warranty replacement, yes.
    Conditions are:
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications.  However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.

  • GS70 - Does not boot - black screen with solid white dash

    Sorry for the long post - I've been beating my head against this problem all day, filed a report ticket and really need help from anyone who has ideas.
    Yesterday evening after finally relenting and allowing the patch Tuesday updates to install on my GS70 Stealth I tried to power on my computer and it remained stuck at the MSI logo. I waited 3 hours with no success before powering it off and attempting to access the bios by hitting the delete button. The screen turned black except for one non-blinking white dash near the center of the screen. This screen also remains indefinitely and requires a hardware power off to work. I've tried all of the function key presses and recovery shortcuts to no avail.
    Eventually I tried to boot into linux via a live USB. I still could not access the bios but, to my surprise, so long as this USB is in my system, Windows happily boots. After this I tried to revert to a system restore point before the updates but that did not resolve the problem. I also tried to update the BIOS but there is no way to install BIOS updates that I know of that doesn't require accessing the old BIOS first (which I cannot do because the black screen with a white dash is still all that shows up). I tried forcing the UEFI bios to load through windows recovery settings with no luck either.
    I've sent in an RMA/Support request and hopefully MSI will repair or replace my device but I sent it in for an RMA literally less than two months ago and to be having to do it again so soon is starting to turn me off of the product. For me to insure and ship my device to MSI costs a little over $100 each time which is rapidly turning this $1600 product into an $1800 one and turning me from an MSI brand loyalist to a 'one-star-review everywhere' evangelist. Is it possible that something MSI did during the last RMA screwed up my motherboard (they replaced the disfunctional steel series keyboard with a new marginally more functional steel series keyboard)? Does MSI ever cover the shipping costs for an RMA if the RMA is a result of damage that they caused to the device? Is there anything I should do to try to avoid burning more money trying to get a luxury-priced product I've already paid for to function?

    i had similar problem myself on my first GS70 it has some sort of bios problem that it random hangs itself :/ causes OS not to boot and bios refuses to load but i managed to get my recovery USB to boot but not bios yet so i sent laptop off for repair they replaced the motherboard so i got it back then i had an faulty gpu :/ so i took it back and got money back so i bought new one some where else since than i havent had problem so this sort of problem sounds like bios firmware isnt booting propertly :/ so have you tried removing msata and HDD from laptop and then power laptop on? to see if bios gets forced on if so power it off put msata back on and so then power laptop back on and bios shall work again

  • Ideapad S10-3 black screen, won't boot

    Hello, every body.
    I have a lenovo ideapad s10-3. Right now it is black screen and won't boot, but power works.
    I disassembled it, and just left CPU, graphics card, and RAM. Power works, and fan starts rotating and stops. I leave it running, i can feel CPU and Graphics Card hot.
    Before this problem(black screen and won't boot) happened. sometime it can boot, somtimes it does not and black screen. Sometime after trying several time (force ti shutdown, restart power on), it boots and goes to be normal. Right now it won't work anymore.
    At the left-bottom of laptop, there are 4 flash lights, the former 3 are working fine, and the last (4th. there is small arrow (two sides) in the center of cylinder, what does it mean?) does not flash. If it flashes fine, the computer works well, if not, won't work. 
    I clean the RAM fingerpin, won't work. Tried to connect with external screen, won't work. Remove BIOS battery, won't work. I tried another Hard Drive and RAM seperately, it does not work.
    I did try this solution (How to fix Graphics Card in Lenovo R61 ), but it does not work for my computer.
    I can press power button to force the laptop shut down, it looks like the motherboard has no problem
    What is going on my laptop. Please help me of this trouble. Thanks a lot.
    Happy Christmas and New Year.

    Hi,
    1) Yeah, somehow OS X has been messed up enough that it can't finish loading. What else have you done with it lately? When I went through my machine fiddling with Quicktime in the system Library folders, I ended up where you are.
    2) I don't think you can fix it from the OF prompt. I had a daily backup of my drive, and so I was able to boot off of that. You can boot back into OS 9 though, by holding down the Option key after a cold boot's chime.
    4) I'd say it's worth fixing. Beats plunking down $500 or more on a new machine.
    HTH,
    ~FifthWheel

  • I have a black screen at start up on my PowerBook pro. I installed lio

    I have a black screen at start up on my MacBook Pro. I installed Lion and it worked fine.

    emanuelbrown wrote:
    @tjk Thanks! My mother-in-law (also named Barbara, ironically) started having this issue this morning, so I've been looking into this. It seems to be a fairly widespread problem which makes me think that Lion (10.7.x) has exacerbated some issue with the card that may have already been in place. from everything I've seen, its a display-only issue (no data corruption, unless you force reboot). Still very frustrating for folks though.
    Actually, thank you! I'd probably still be beating my head against the wall. That did ring a bell with another link I had stored: http://arstechnica.com/apple/news/2011/08/buggy-nvidia-drivers-giving-2010-macbo ok-pro-owners-lion-upgrade-headaches.ars
    Don't know if it's related or not (and don't have the inclination to read all of them right now), but there it is. Will stay tuned for any new info. Again, good work and thanks!

  • Very weird problem - not your average black screen

    So, I finally broke down and decided to ask for help on this. I have a good amount of experience and have not been able to get this to work consistently. The laptop is admittedly pretty beat up, but it works without a hitch once it's booted. It seems like complete luck getting it to work as if it starts up when it's done frustrating me. I need it as a node for an Adhoc project and it would be great if it could work normally again. 
    Laptop:
    Toshiba M305 w/ Turion x2 and Radeon graphics. 
    I don't think it makes a difference but I'm running Debian on it with an SSD. I've also replaced the original keyboard. The problem started months after these changes after the laptop took a hit off the bed (carpet). I get a black screen as soon as I turn it on after shutting it down. The screen won't turn on but I hear the DVD drive make its normal noise and the fan spins. If I'm persistent enough with a combination of below tactics or just plain luck it will start back up and work perfect.
    What I've tried to no avail:
    -removing the battery and the power and holding down the power to drain the capacitors
    -taking out one of both memory modules (i think it does the POST because it beeps when there's no memory)
    -removing the hard drive
    Things I don't think it is and why:
    -don't think it's the screen because when it works it lights up fine, also it has the same issue when plugged into a vga display
    -don't think it's the hard drive nor the memory as it has the same problem with either off
    I'm inclined to think it's a MoBo problem? But then why would it work perfectly fine when it feels like it... I would think nothing is fried. The next thing I was going to try is removing the CMOS battery to reset the BIOS settings and while it's open check for loose connectors I guess. 
    Any help is truly appreciated! Let me know if there's any other info I can provide. Thanks.
    -Dan

    http://forums.toshiba.com/t5/Computer-Troubleshooting/black-screen-after-turn-on-or-reboot/m-p/6775
    ^ There is a mention in there of a problem with faulty switch or something, related to whether or not the machine can tell the lid is open.   If it works sometimes, that plus it was jolted in a fall might say loose connection someplace.
    irisvista.com shows pictures of disassembling various Toshibas, in case you hadn't found that site yet.

  • Black Screen, But Responds to Keyboard

    I have an eMac with Mac OS X 10.3.9 and Mac OS 9.2.2 installed. It is the most defunct Mac I have ever used (I bought it at a church yard sale.)
    The OS X part is fine, which is good as this is the Clasic Mac OS forums.
    OS 9 is having issues. At one point, the previous owner decided to nuke the folder containing applications for OS 9. iTunes, AirPort, IE, Mail, Sherlock, etc. is all gone. I thought maybe if I downloaded and installed Mac OS 9.2.2 over Mac OS 9.2.2 it would work fine. Wrong. Now when it boot it shows the Happy Mac, says "Welcome to Mac OS" and then displays a black screen. When on this black screen, the light that "beats" (for lack of a better term) to show when the Mac is asleep is solid. When I press a button such as the eject button the disk tray pops out.
    I have tried pressing the "X" key while booting to no avail. It still goes straight to 9.2.2. It now is performing a verification of "Macintosh HD" since I had to do a hard shutdown to shut it down after the black screen. If I choose "stop," it goes to a "Starting up..." screen then goes to the black screen again. The progress bar only progress about 1/8 of the way and the disk verification found no issues.
    If I press and hold the "Option" key I only can boot to Classic as I set Classic as the start up disk. Holding shift does nothing either. I don't know if there is a Verbose mode or Single-User mode in Classic, but it should work anyway with an eMac, but neither of those worked. Resetting the PRAM didn't provide any better results, either.
    After the screen goes black, the hard drive still revs and the fans are running quite loudly. Again, it will respond to keyboard and mouse input as it revs more when I press a button and it can eject the disk drive.
    Would Target Disk Mode to another Mac to at least preserve the files work, or would that even be pointless? I have no install disks as I bought it at a yard sale.
    Any help of any sort would be appreciated.
    Thanks in advance,
    Kyle

    There is a sort-of equivalent to OSX's Safe Boot for OS 9 - hold down the Shift key from the time the startup chimes sound, and the OS will boot with Extensions Disabled. Since you are getting the Welcome screen, this may work.
    When holding down the X key to force a boot using OS X, be sure to press the X key about the time the startup chimes sound, and keep it held down until you know for sure it has started to boot to OS X.
    There is another way to get back to OSX - boot the machine to an appropriate CD, then use the Startup Disk on the CD's OS to select OS X on the hard drive. Then do a normal restart.
    I thought maybe if I downloaded and installed Mac OS 9.2.2 over Mac OS 9.2.2 it would work fine. Wrong.
    If your eMac is one of the original models, that should have been okay.
    However, if your eMac is one of the later models, one with ATI graphics and a CD-ROM or Combo drive, it can use only the model-specific version of OS 9.2.2 that shipped with it for booting. The OS 9.2.2 download updater is not 'new' enough to support it. If this is the case, it should not have been possible to install the OS 9.2.2 download updater on top of newer (more recent) software elements. Unfortunately errors do happen on ocasion, and if you do have this later model and the updater did install, the ATI extension set in the OS may not be sufficient for the hardware.

  • HAVE NEW 13.3 MAC AIR AND when using it to open sites in safari I have no issue until I go to a link page that is a pdf file or I am trying to save the screen info as a pdf. I only get a black screen with no data, cannot find solution in help menu

    HAVE NEW 13.3 MAC AIR (previously, still have 13.3 MCbook pro which works captures what I am looking for an answer to)
    when i open sites in safari the page opens fine if it is not a pdf based page.
    Once i open a site that has a link to another page that is a pdf based page the page comes up as a black screen with no info showing
    If I open a site that gices me an open to save a file to a word, excel type document or a pdf , everything works fine until I try to save the information to a PDF and again the screen goes black
    I have tried the safari help site but to no avail, does anyone have a solution to thid problem. (I do have the abode ofr mac program loaded)

    If you delete all the Adobe Reader stuff it will probably fix this. For almost everything, the Apple pdf handling works better.

  • Start-up problems, black screen or open firmware

    My iBook G4 1.33GHz Dual USB, with 1 gb RAM memory has been troublesome lately. It's installed with the latest version of OS 10.4.9
    When starting up the ibook, it will sometimes only show a black screen after the boot chime. Repeated force restart sometimes makes it boot up the open firmware (white screen).
    Then I see the error message:
    "Illegal instructions at: %SRR0:ff85e778 %SRR1:00081000"
    When I continue on with "mac-boot", I get the blue screen with a question marked box. So it can't find the startup disk.
    This usually only happens when I'm done working for the day and close the lid on my ibook without manually clicking on the sleep mode when I put in in my drawer,. I've seen several times that the screen is still on when I close the lid, so it will continue to burn battery time.
    I've managed to get the ibook to boot properly after removing the battery and letting it "cool-down" for 15-20 min. Also, zapping pram, vram sometimes works, but I don't know how much that actually helped. It worked once when I typed in the reset-nvram in the open firmware screen too.
    I'd rather not have this happen at all! Any suggestions? Is this the much-talked about RAM memory failure?
    Any suggestions would be very appreciated.
    Message was edited by: antony chen

    HI,
    *"I get the blue screen with a question marked box."*
    That can mean several things. One, the drive is failing. Two, your iBook can't find a System Folder to boot from. Try booting while holding down the Option key which will prompt the Startup Manager window.
    MemTest
    Boot from your install disk and check the hard disk for errors.
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window where you see Capacity and Available. Make sure there is always 15% free disk space. Not enough disk space can cause directory corruption.
    If you cannot boot from your install disk, try booting in Safe Mode
    A flashing question mark appears when you start your Mac
    Carolyn

  • My iMac 8.1 was slowing down and had permissions problems. I backed everything up, and then re-installed. Now all I get is a black screen. Power+D gives me a hardware error message: HDD-1336. Help!

    My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?

    DonM. wrote:
    Hi
    Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
    Cheers. Don
    No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac  or an Apple refurbished iMac to save money.

  • A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

    A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

    Hi 22chill,
    I recommend that we delete and re-download the movie from your purchase history:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks,
    Matt M.

  • Recently whenever i plug my ipod nano to my pc the pc shuts down to a blue screen then a black screen  then windows error message i have the latest version of itunes and software i just got this dec 2012

    as of today when i plug my 7th generation ipod that i just got for christmas 2012 my pc shuts down to a blue screen with alot of writing then to black screen with alot of writing then to an all black screen then and windows error message my computer is ingood condition no malicious malware and has been clean i need help
    thank ycj

    let me get back with the answer with what the messages say on the blue screen and the black screen if i can read them fast enough before it shuts down i have windows 7 professional

  • [solved]black screen with xorg 1.6 after resume (intel)

    after upgrading to xorg-server 1.6 no matter if i use s2ram or s2disk, first resume works fine, the second suspend and resume results in a black screen without any chance to swich to any tty.
    i have read about bug like this which was resolved with using intel legacy driver. however my problem still occures.
    maybe there is some module i should load/unload/reload on hibernate/wake-up?
    here is my xorg.conf, lspci, Xorg.0.log.old (the one i had to kill with black screen) and Xorg.0.log
    xorg.conf
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    Option "DontZap" "false"
    EndSection
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Cursor" "SendCoreEvents"
    InputDevice "Stylus" "SendCoreEvents"
    InputDevice "Eraser" "SendCoreEvents"
    EndSection
    Section "InputDevice"
    Identifier "Cursor"
    Driver "wacom"
    Option "Device" "/dev/ttyS0"
    Option "Type" "cursor"
    Option "ForceDevice" "ISDV4"
    Option "KeepShape" "on"
    Option "Mode" "Absolute"
    Option "BottomY" "18432"
    Option "BottomX" "24576"
    EndSection
    Section "InputDevice"
    Identifier "Stylus"
    Driver "wacom"
    Option "Device" "/dev/ttyS0"
    Option "Type" "stylus"
    Option "ForceDevice" "ISDV4"
    Option "KeepShape" "on"
    Option "TPCButton" "off"
    Option "BottomY" "18432"
    Option "BottomX" "24576"
    Option "Mode" "Absolute"
    EndSection
    Section "InputDevice"
    Identifier "Eraser"
    Driver "wacom"
    Option "Device" "/dev/ttyS0"
    Option "Type" "eraser"
    Option "ForceDevice" "ISDV4"
    Option "KeepShape" "on"
    Option "BottomY" "18432"
    Option "BottomX" "24576"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/local"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "extmod"
    Load "xtrap"
    Load "dbe"
    Load "dri"
    Load "glx"
    Load "freetype"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "base"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de, ru"
    Option "XkbVariant" "nodeadkeys, winkeys"
    Option "XkbOptions" "grp:caps_toggle"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
    BusID "PCI:0:2:0"
    Option "FramebufferCompression" "on"
    Option "AccelMethod" "EXA"
    Option "Tiling" "on"
    Option "TrippleBuffer" "true"
    Option "MigrationHeuristic" "greedy"
    Option "RenderAccel" "true"
    Option "ExaNoComposite" "false"
    Option "EnablePageFlip" "true"
    Option "DRI" "on"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "dri"
    Mode 0666
    EndSection
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
    00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
    00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
    00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
    00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
    02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
    04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
    04:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13)
    04:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01)
    Xorg.0.log
    X.Org X Server 1.6.0
    Release Date: 2009-2-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 10 April 2009 07:03:14PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:54 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Cursor"
    (**) |-->Input Device "Stylus"
    (**) |-->Input Device "Eraser"
    (**) Option "DontZap" "false"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/local,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "xtrap"
    (WW) Warning, couldn't open module xtrap
    (II) UnloadModule: "xtrap"
    (EE) Failed to load module "xtrap" (module does not exist, 0)
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.3.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "wacom"
    (II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
    (II) Module wacom: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Wacom driver level: 47-0.8.3-2 $
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "AccelMethod" "EXA"
    (**) intel(0): Option "DRI" "on"
    (**) intel(0): Option "FramebufferCompression" "on"
    (**) intel(0): Option "Tiling" "on"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
    (--) intel(0): Chipset: "915GM"
    (--) intel(0): Linear framebuffer at 0xC0000000
    (--) intel(0): IO registers at addr 0xA0080000
    (II) intel(0): 2 display pipes available.
    (**) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (II) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7872 kB
    (II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1024x768
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 7932 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
    (WW) intel(0): PIPEASTAT before: status:
    (WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 363776 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1455100 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xa0080000
    (II) intel(0): [drm] ring buffer = 0xc0000000
    (II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
    (II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
    (II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
    (II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (**) intel(0): Option "MigrationHeuristic" "greedy"
    (**) intel(0): Option "EXANoComposite" "false"
    (II) EXA(0): Offscreen pixmap area of 12582912 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
    (II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
    (II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
    (II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
    (II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Enabled
    (WW) intel(0): Option "TrippleBuffer" is not used
    (WW) intel(0): Option "RenderAccel" is not used
    (WW) intel(0): Option "EnablePageFlip" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 270 x 203
    (**) Option "Protocol" "auto"
    (**) Option "Device" "/dev/input/mice"
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (**) Mouse0: (accel) keeping acceleration scheme 1
    (**) Mouse0: (accel) filter chain progression: 2.00
    (**) Mouse0: (accel) filter stage 0: 20.00 ms
    (**) Mouse0: (accel) set acceleration profile 0
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "base"
    (**) Keyboard0: XkbRules: "base"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "de, ru"
    (**) Keyboard0: XkbLayout: "de, ru"
    (**) Option "XkbVariant" "nodeadkeys, winkeys"
    (**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
    (**) Option "XkbOptions" "grp:caps_toggle"
    (**) Keyboard0: XkbOptions: "grp:caps_toggle"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (**) Option "SendCoreEvents"
    (**) Cursor: always reports core events
    (**) Cursor device is /dev/ttyS0
    (**) Cursor is in absolute mode
    (**) Cursor: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Cursor: keeps shape
    (**) Option "BottomX" "24576"
    (**) Cursor: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Cursor: bottom y = 18432
    (**) Option "BaudRate" "9600"
    (**) Cursor: serial speed 9600
    (II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
    (**) Option "Device" "/dev/ttyS0"
    (**) Option "StopBits" "1"
    (**) Option "DataBits" "8"
    (**) Option "Parity" "None"
    (**) Option "Vmin" "1"
    (**) Option "Vtime" "10"
    (**) Option "FlowControl" "Xoff"
    usbDetect: can not ioctl version
    (==) Wacom using pressure threshold of 15 for button 1
    (==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
    (==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Stylus: always reports core events
    (**) Stylus device is /dev/ttyS0
    (**) Stylus is in absolute mode
    (**) Stylus: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Stylus: keeps shape
    (**) Option "BottomX" "24576"
    (**) Stylus: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Stylus: bottom y = 18432
    (**) Stylus: threshold = 15
    (**) Stylus: max x set to 24576 by xorg.conf
    (**) Stylus: max y set to 18432 by xorg.conf
    (**) Stylus: max z = 255
    (**) Option "TPCButton" "off"
    (**) Option "BaudRate" "9600"
    (**) Stylus: serial speed 9600
    (II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
    (==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Eraser: always reports core events
    (**) Eraser device is /dev/ttyS0
    (**) Eraser is in absolute mode
    (**) Eraser: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Eraser: keeps shape
    (**) Option "BottomX" "24576"
    (**) Eraser: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Eraser: bottom y = 18432
    (**) Eraser: threshold = 15
    (**) Eraser: max x set to 24576 by xorg.conf
    (**) Eraser: max y set to 18432 by xorg.conf
    (**) Eraser: max z = 255
    (**) Option "BaudRate" "9600"
    (**) Eraser: serial speed 9600
    (II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
    (==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (II) config/hal: Adding input device ThinkPad Extra Buttons
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Wacom Serial Tablet PC Pen Tablet/Digitizer
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device TPPS/2 IBM TrackPoint
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Video Bus
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    Xorg.0.log.old
    X.Org X Server 1.6.0
    Release Date: 2009-2-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 10 April 2009 07:03:14PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:40 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Cursor"
    (**) |-->Input Device "Stylus"
    (**) |-->Input Device "Eraser"
    (**) Option "DontZap" "false"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/local,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "xtrap"
    (WW) Warning, couldn't open module xtrap
    (II) UnloadModule: "xtrap"
    (EE) Failed to load module "xtrap" (module does not exist, 0)
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.3.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "wacom"
    (II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
    (II) Module wacom: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Wacom driver level: 47-0.8.3-2 $
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "AccelMethod" "EXA"
    (**) intel(0): Option "DRI" "on"
    (**) intel(0): Option "FramebufferCompression" "on"
    (**) intel(0): Option "Tiling" "on"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
    (--) intel(0): Chipset: "915GM"
    (--) intel(0): Linear framebuffer at 0xC0000000
    (--) intel(0): IO registers at addr 0xA0080000
    (II) intel(0): 2 display pipes available.
    (**) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (II) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7872 kB
    (II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1024x768
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 7932 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0c00
    (WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
    (WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
    (WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
    (WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
    (WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
    (WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
    (WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
    (WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
    (WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
    (WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
    (WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
    (WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
    (WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
    (WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
    (WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
    (WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
    (WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
    (WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
    (WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
    (WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
    (WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
    (WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
    (WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
    (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
    (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
    (WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
    (WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
    (WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
    (WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 363776 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1455100 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] loaded kernel module for "i915" driver.
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xa0080000
    (II) intel(0): [drm] ring buffer = 0xc0000000
    (II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
    (II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
    (II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
    (II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (**) intel(0): Option "MigrationHeuristic" "greedy"
    (**) intel(0): Option "EXANoComposite" "false"
    (II) EXA(0): Offscreen pixmap area of 12582912 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
    (II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
    (II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
    (II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
    (II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Enabled
    (WW) intel(0): Option "TrippleBuffer" is not used
    (WW) intel(0): Option "RenderAccel" is not used
    (WW) intel(0): Option "EnablePageFlip" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 270 x 203
    (**) Option "Protocol" "auto"
    (**) Option "Device" "/dev/input/mice"
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (**) Mouse0: (accel) keeping acceleration scheme 1
    (**) Mouse0: (accel) filter chain progression: 2.00
    (**) Mouse0: (accel) filter stage 0: 20.00 ms
    (**) Mouse0: (accel) set acceleration profile 0
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "base"
    (**) Keyboard0: XkbRules: "base"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "de, ru"
    (**) Keyboard0: XkbLayout: "de, ru"
    (**) Option "XkbVariant" "nodeadkeys, winkeys"
    (**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
    (**) Option "XkbOptions" "grp:caps_toggle"
    (**) Keyboard0: XkbOptions: "grp:caps_toggle"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (**) Option "SendCoreEvents"
    (**) Cursor: always reports core events
    (**) Cursor device is /dev/ttyS0
    (**) Cursor is in absolute mode
    (**) Cursor: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Cursor: keeps shape
    (**) Option "BottomX" "24576"
    (**) Cursor: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Cursor: bottom y = 18432
    (**) Option "BaudRate" "9600"
    (**) Cursor: serial speed 9600
    (II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
    (**) Option "Device" "/dev/ttyS0"
    (**) Option "StopBits" "1"
    (**) Option "DataBits" "8"
    (**) Option "Parity" "None"
    (**) Option "Vmin" "1"
    (**) Option "Vtime" "10"
    (**) Option "FlowControl" "Xoff"
    usbDetect: can not ioctl version
    (==) Wacom using pressure threshold of 15 for button 1
    (==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
    (==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Stylus: always reports core events
    (**) Stylus device is /dev/ttyS0
    (**) Stylus is in absolute mode
    (**) Stylus: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Stylus: keeps shape
    (**) Option "BottomX" "24576"
    (**) Stylus: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Stylus: bottom y = 18432
    (**) Stylus: threshold = 15
    (**) Stylus: max x set to 24576 by xorg.conf
    (**) Stylus: max y set to 18432 by xorg.conf
    (**) Stylus: max z = 255
    (**) Option "TPCButton" "off"
    (**) Option "BaudRate" "9600"
    (**) Stylus: serial speed 9600
    (II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
    (==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Eraser: always reports core events
    (**) Eraser device is /dev/ttyS0
    (**) Eraser is in absolute mode
    (**) Eraser: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Eraser: keeps shape
    (**) Option "BottomX" "24576"
    (**) Eraser: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Eraser: bottom y = 18432
    (**) Eraser: threshold = 15
    (**) Eraser: max x set to 24576 by xorg.conf
    (**) Eraser: max y set to 18432 by xorg.conf
    (**) Eraser: max z = 255
    (**) Option "BaudRate" "9600"
    (**) Eraser: serial speed 9600
    (II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
    (==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (II) UnloadModule: "mouse"
    (II) UnloadModule: "kbd"
    (II) UnloadModule: "wacom"
    (II) UnloadModule: "wacom"
    (II) UnloadModule: "wacom"
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (II) intel(0): xf86UnbindGARTMemory: unbind key 1
    (II) intel(0): xf86UnbindGARTMemory: unbind key 2
    (II) intel(0): xf86UnbindGARTMemory: unbind key 3
    (II) intel(0): xf86UnbindGARTMemory: unbind key 4
    (II) intel(0): [drm] removed 1 reserved context for kernel
    (II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8079000 at 0xb78f7000
    (II) intel(0): [drm] Closed DRM master.
    anyone clue?
    Last edited by lynucs (2009-05-09 18:38:01)

    took a look into everything.log.
    that line looks pretty suspicious:
    kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    it occures around the time i did the last resume.
    here is a relevant snippet from everything.log:
    Apr 14 18:35:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 18:35:58 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 18:36:00 thinky acpid: client connected from 9040[0:0]
    Apr 14 18:36:00 thinky acpid: 1 client rule loaded
    Apr 14 18:38:04 thinky ntpd[6265]: adjusting local clock by -87.862975s
    Apr 14 18:42:04 thinky ntpd[6265]: adjusting local clock by -87.769493s
    Apr 14 18:42:55 thinky acpid: client 6223[0:0] has disconnected
    Apr 14 18:42:55 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
    Apr 14 18:42:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 18:43:07 thinky kernel: PM: Syncing filesystems ... done.
    Apr 14 18:43:07 thinky kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
    Apr 14 18:43:07 thinky kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    Apr 14 18:43:07 thinky kernel: Suspending console(s) (use no_console_suspend to debug)
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D3
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Stopping disk
    Apr 14 18:43:07 thinky kernel: serial 00:09: disabled
    Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PME# disabled
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B disabled
    Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# enabled
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D disabled
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: ACPI: Preparing to enter system sleep state S3
    Apr 14 18:43:07 thinky kernel: Disabling non-boot CPUs ...
    Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
    Apr 14 18:43:07 thinky kernel: Intel machine check architecture supported.
    Apr 14 18:43:07 thinky kernel: Intel machine check reporting enabled on CPU#0.
    Apr 14 18:43:07 thinky kernel: Back to C!
    Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
    Apr 14 18:43:07 thinky kernel: Force enabled HPET at resume
    Apr 14 18:43:07 thinky kernel: ------------[ cut here ]------------
    Apr 14 18:43:07 thinky kernel: WARNING: at kernel/hrtimer.c:625 hres_timers_resume+0x41/0x50()
    Apr 14 18:43:07 thinky kernel: Hardware name: 1866WBA
    Apr 14 18:43:07 thinky kernel: hres_timers_resume() called with IRQs enabled!Modules linked in: ipv6 aes_i586 aes_generic i915 drm i2c_algo_bit ext2 pcmcia psmouse thinkpad_acpi rfkill nvram i2c_i801 serio_raw iTCO_wdt iTCO_vendor_support i2c_core sg yenta_socket rsrc_nonstatic sdhci_pci sdhci pcmcia_core mmc_core video output uhci_hcd ehci_hcd usbcore intel_agp agpgart evdev thermal fan button battery ac fuse snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ath_pci wlan ath_hal(P) arc4 ecb ath5k mac80211 led_class cfg80211 tg3 libphy cpufreq_powersave cpufreq_ondemand cpufreq_conservative acpi_cpufreq freq_table processor rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sd_mod ata_piix ahci ata_generic pata_acpi libata scsi_mod
    Apr 14 18:43:07 thinky kernel: Pid: 9512, comm: s2ram Tainted: P 2.6.29-ARCH #1
    Apr 14 18:43:07 thinky kernel: Call Trace:
    Apr 14 18:43:07 thinky kernel: [<c012f9d7>] warn_slowpath+0x87/0xe0
    Apr 14 18:43:07 thinky kernel: [<c011ec25>] default_spin_lock_flags+0x5/0x10
    Apr 14 18:43:07 thinky kernel: [<c01164d0>] lapic_next_event+0x10/0x20
    Apr 14 18:43:07 thinky kernel: [<c01500e3>] clockevents_program_event+0xa3/0x170
    Apr 14 18:43:07 thinky kernel: [<c0151312>] tick_dev_program_event+0x32/0xb0
    Apr 14 18:43:07 thinky kernel: [<c0150447>] tick_notify+0x97/0x3c0
    Apr 14 18:43:07 thinky kernel: [<c01491a6>] notifier_call_chain+0x36/0x70
    Apr 14 18:43:07 thinky kernel: [<c0147ea1>] hres_timers_resume+0x41/0x50
    Apr 14 18:43:07 thinky kernel: [<c014cc3a>] timekeeping_resume+0x11a/0x140
    Apr 14 18:43:07 thinky kernel: [<c0299d91>] __sysdev_resume+0x11/0x50
    Apr 14 18:43:07 thinky kernel: [<c0299e0f>] sysdev_resume+0x3f/0x70
    Apr 14 18:43:07 thinky kernel: [<c015b410>] suspend_devices_and_enter+0x160/0x190
    Apr 14 18:43:07 thinky kernel: [<c015bb7f>] freeze_processes+0x4f/0xa0
    Apr 14 18:43:07 thinky kernel: [<c015b58a>] enter_state+0xfa/0x150
    Apr 14 18:43:07 thinky kernel: [<c015b674>] state_store+0x94/0xd0
    Apr 14 18:43:07 thinky kernel: [<c015b5e0>] state_store+0x0/0xd0
    Apr 14 18:43:07 thinky kernel: [<c0224a74>] kobj_attr_store+0x24/0x30
    Apr 14 18:43:07 thinky kernel: [<c01f3351>] sysfs_write_file+0xa1/0x100
    Apr 14 18:43:07 thinky kernel: [<c01f32b0>] sysfs_write_file+0x0/0x100
    Apr 14 18:43:07 thinky kernel: [<c01a8df0>] vfs_write+0xa0/0x160
    Apr 14 18:43:07 thinky kernel: [<c01a8f81>] sys_write+0x41/0x80
    Apr 14 18:43:07 thinky kernel: [<c0103ea3>] sysenter_do_call+0x12/0x2f
    Apr 14 18:43:07 thinky kernel: ---[ end trace 2b9e3dc85bad025f ]---
    Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x68000000)
    Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
    Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xa0211000)
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
    Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: restoring config space at offset 0x3 (was 0x5008, writing 0xa808)
    Apr 14 18:43:07 thinky kernel: ACPI: Waking up from system sleep state S3
    Apr 14 18:43:07 thinky kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
    Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PME# disabled
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: PME# disabled
    Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb2: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb3: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb4: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb5: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Apr 14 18:43:07 thinky kernel: pci 0000:00:1e.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# disabled
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    Apr 14 18:43:07 thinky kernel: serial 00:09: activated
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Starting disk
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
    Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
    Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
    Apr 14 18:43:07 thinky kernel: ata1: EH complete
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Apr 14 18:43:07 thinky kernel: usb 4-2: reset full speed USB device using uhci_hcd and address 2
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: Restarting tasks ... done.
    Apr 14 18:43:07 thinky acpid: client 9040[0:0] has disconnected
    Apr 14 18:43:07 thinky logger: ACPI group/action undefined: processor / CPU
    Apr 14 18:43:07 thinky acpid: client connected from 9040[0:0]
    Apr 14 18:43:07 thinky acpid: 1 client rule loaded
    Apr 14 18:43:08 thinky dhcpcd[7651]: wlan0: carrier lost
    Apr 14 18:43:08 thinky kernel: wlan0: deauthenticating by local choice (reason=14)
    Apr 14 18:43:08 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
    Apr 14 18:43:09 thinky kernel: ath5k phy0: noise floor calibration timeout (2452MHz)
    Apr 14 18:43:13 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
    Apr 14 18:43:13 thinky kernel: wlan0 direct probe responded
    Apr 14 18:43:13 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:13 thinky kernel: wlan0: authenticated
    Apr 14 18:43:13 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:13 thinky kernel: wlan0: deauthenticated (Reason: 1)
    Apr 14 18:43:14 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 2
    Apr 14 18:43:14 thinky kernel: wlan0 direct probe responded
    Apr 14 18:43:14 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:14 thinky kernel: wlan0: authenticated
    Apr 14 18:43:14 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:14 thinky kernel: wlan0: deauthenticated (Reason: 1)
    Apr 14 18:43:15 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 3
    Apr 14 18:43:15 thinky kernel: wlan0 direct probe responded
    Apr 14 18:43:15 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:15 thinky kernel: wlan0: authenticated
    Apr 14 18:43:15 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:15 thinky kernel: wlan0: deauthenticated (Reason: 1)
    Apr 14 18:43:16 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b timed out
    Apr 14 18:43:19 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
    Apr 14 18:43:19 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 19:27:27 thinky syslog-ng[5106]: syslog-ng starting up; version='3.0.1'
    Apr 14 19:27:27 thinky kernel: Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
    Apr 14 19:27:27 thinky kernel: KERNEL supported cpus:
    Apr 14 19:27:27 thinky kernel: Intel GenuineIntel

Maybe you are looking for

  • Using Acrobat 9 Standard on desktop running Win 7 32Bit - and an HP1536dnf MFP  -  Scanner function

    Using Acrobat 9 Standard on desktop running Win 7 32Bit - and an HP1536dnf MFP  -  Scanner function won't run - message states that driver missing  - have tried to re-load original software many times from CD and download from HP website - that times

  • Webutil - get client info

    I have a problem, I'd like to gather client info and present that info as my forms application loads but unfortunatley I can't seem to get it to works. I can create a button and place code behind it and gather information that way so I'm confident th

  • OSB 10.3: Enabling JConsole

    Hi, I am trying to enable JConsole on OSB (Weblogic AdminServer/JDK 1.6.0_05). Used the following parameters to enable JMX: -Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=8889 -Dcom.sun.management.jmxremote.local.only=false -Dcom.

  • HT1338 Computer keeps having to restart. Why is it doing this?

    I have also recently taken the computer to geek squad. They ran several test and supposedly there are no hardware problems.

  • Gallery View for E51

    Hi there, There is any Gallery View like N73 or N95, but for E51? I'll appreciate a lot! Yours Sincerily, César Maciel