HP Blackbird 002 gaming system restart problem

Product name:  HP Blackbird 002 LCi
Backbround:  Fantastic machine and very expensive.  When I bought it, I was told by HP that it will have tech support (not necessarily free) for life as long as HP was in business.  Apparently no longer supported according to three HP techs, Shsma, Mangish and Ajfhat.  So here I am.  I have upgraded harddrives and the operating system, from original Ultimate Vista, to Windows 7, to Windows 8 throughout the years.  Works like a charm.
Problem:  I have had this problem with all three operating systems.  When ever there is a power failure or I shut down the computer, the led lights within the case blink constantly and I am unable to turn it back on by pressing the power button.  I have to unplug the computer, wait a while, plug it back in, then press the power button.  Then and only then, does it kick in and starts.  Is it the power supply?  Is it the motherboard?  Or is it, something simpler, like the battery on the motherboard?
By the way, the front of the case has two buttons.  The left one has the power symbol.  The right one has a circle with a triangle inside symbol.  If it is the power supply can someone direct me to where I can purchase it?
Thanks!
This question was solved.
View Solution.

HPB, welcome to the forum.
Do you have the computer plugged into a surge supressor?  If not, using one may solve part of your problem.  However, if there have been many power failures, it may have damaged your power supply unit (PSU).  Here is HP PartSurfer to see if you can locate the PSU.  I am not familiar with the Blackbird, so I don't know what type of PSU it has installed.
Please click "KUDOS star" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

  • APC UPS, Mountain Lion, and system restart problem

    I have a Mac Pro (3,1) and it's been running Lion (10.7.x) for a long time. It's connected to an APC UPS XS 1500 via a USB cable for years. I've never had any problems with it.
    Two weeks ago I updated to Mountain Lion (10.8.2). Since then I've returned to my machine to find that it had rebooted itself. After logging in, the system tells me that there was a problem and asks if I want to send the error report to Apple.
    Yesterday, I tried unplugging the Mac Pro from the UPS, plugging it directly into a wall outlet, and disconnecting the USB-UPS cable. So far, I've had no problem with system restarts.
    Has anyone had a similar problem? If so, did you solve it? How?
    Thank you.

    Hi, macjack. Thanks for your response.
    So far, with the MP plugged directly into a wall outlet I've had no system initiated reboots or shut-downs.
    I looked in the console log and there's so much stuff in there, I'm simply lost. Are there one or two keywords I should search for that might help in debugging the problem?
    Again, thanks.

  • Pt880 neo system restart problems during gameplay

    hello, im currently running the following setup on my computer. please forgive me if i leave anything out...
    p4-3.4 prescott CPU
    2x 512ddr400 ram (brand unknown) im upgrading to crucial 512 as these are loaner sticks from a friend.
    Western Digital 160gb HDD
    Radeon 9800 pro graphics card
    Dynex ATX midtowercase
    MSI pt880 neo mainboard
    sony cdrw  crx230a
    my powersupply is
    voltage 115-230~
    current 10a/5a
    DC output is +5v/+22V/+3.3v
    frequency is 60hz/50hz
    and max output is 500watts
    I use a thermaltake spark7+ cpu cooler
    as well as 4 case fans, a cpu cooling duct and a lower exhuast fan.
    my problem is this. while loading anygame or running a degfrag my system restarts. completely reboots. I have all the latest bios drivers ver.1.70 i belive. It appears to be a heat or power isssue. but i cannot be sure. my cpu temperature is usally around 56-60c. it seems very annoying because my friend has the same board and near same setup  allthough he is only running a 3.0. does the 3.4 prescott require an insane amount of cooling to run ? or is it a power issue? please help!  

    what are the temp readings under load,also at idle.post in C
    3.4 will run hotter than a 3.0
    explain your cooling solution as far as how many fans,the location of them and the direction of the air flow
    are you overclocked
    what are you using for a thermal interface between the CPU and HEATSINK

  • BSOD's and boot errors on HP Blackbird 002

    Hello,
    I have a HP BLACKBIRD 002 LC with Quad Core - Intel(R) Core2(TM) Quad-Core 2.4GHz Q6600, 2 GB 1066MHz CORSAIR PC2-8500 DDR2 SDRAM, ASUS Striker Extreme, NVIDIA GeForce 8800 GTX, with 768MB of GDDR3 SDRAM running Microsoft Windows Vista Ultimate.
    I’ve had it since December 2007 and have had no problems whatsoever until this past December (2011).  Around the 30th or 31st of December, I started getting Blue Screens of Death (BSOD’s) at random points all with multiple and variable errors.  I’ve tried going into SAFE mode and SAFE mode with networking to resolve the issue, but would eventually get a BSOD.  Sometimes now, it won’t even power on the monitor or it shuts down completely when I try to enter the BIOS setup.  Other times, it boots into the NVIDIA boot agent and then exits due to some error.
    Prior to December 2011 and the errors, I did not install any new hardware nor any major software, besides routine software upgrades that would pop up.  I conducted weekly scans with AVG virus software.  Last major thing I did was uninstall a game.
    Since then I have tried changing the power source cabling, checking the seating of components and cabling inside, recovering Windows to earlier images (20 and then 15 December), re-installing Windows, replacing the CMOS battery, and running whatever memory or hardware diagnostic tools that I can find in the internal menus and the Vista CD.  My brother-in-law, who works as an IT help desk guy, took a look at it remotely and couldn’t figure it out.  I sent him some of the Minidump files(which I still have and can send) and the best he could isolate was consistent errors in the Minidump files with this “ntkrnlpa.exe    ntkrnlpa.exe+1026e0    0x82411000    0x827cb000    0x003ba000    0x4ea6b87e .”
    I did not make a recovery disc since the shadow copy backed everything up.  I do have a full system image from earlier in December that I can use to recover my files, so at this point I’m fine with restoring the factory settings if that’s even possible.
    I have no idea what to do next, so would appreciate any advice.  Thanks.

    I'd pull the "backplane" (the PCB out) and run power and data cables to the drives which I would keep in there caddys.  
    ...and as you said if you need the LED lighting, you can always find a power source for those somewhere.
    Blackbird 002 – Core i7-920 ~ eVGA X58 SLI ~ 6GB Corsair Dominator DDR3 1600 ~ OCZ Vertex 60 GB SSD ~ WD Black 1TB ~ 3 x SLI BFG gtx260s max core 55 ~ Custon LC (cpu)
    Blackbird 002 – Core i7-920 ~ eVGA X58 SLI ~ 12GB Corsair Dominator DDR3 1600 ~ 2 x WD Velociraptor 300GB (Raid 0) ~ WD Velociraptor 300GB ~ WD Velociraptor 150GB ~ eVGA e-GeForce 9800 GT AKIMBO ~ Asetek LCLC (cpu)
    Omen – Intel Core 2 Extreme X6800 ~ eVGA nForce 750i SLI FTW ~ 4GB Corsair Dominator DDR2 1066 ~ WD Raptor 150GB ~ WD Black 1TB ~ eVGA GeForce 8800 GTX ~ LG Multi read write

  • RFC connections do not work after system restart

    Hi PI experts!
    We're facing a problem with our PI 7.0 system. After each restart of the system, all RFC sender communication channels do not work. When testing the connection in the sending SAP system, the connection test fails. Currently we workaround the issue by manually restarting the RFC adapter after system restart.
    Does anybody has any idea how th fix that problem? <<text removed>>
    Cheers,
    Matthias
    Edited by: Matt on Apr 29, 2009 3:26 PM - don't offer points

    Mathias,
    Your problem is due to the fact that SAP is not up and running when XI restarts.
    there is a parameter in RFC adapter that you can modify in order to fix that
    Please, see the following link and let me know: /people/community.user/blog/2006/09/21/xi-rfcadapter-reconnect-issue
    best regards,
    David

  • Satellite A60-102 - Blue screen error appears on screen and system restart

    Sometime Blue screen error showing on screen and system restart
    how can solve this problem

    Hi
    What BSOD code you get exactly?
    Which OS you are using?
    Maybe its a driver problem. Have you checked the device manager for yellow exclamation marks?
    Can you boot in safe mode?

  • My macbook pro 15 inch freezes up. I forced a shutdown. After reboot, system restarted to factory settings, applications/softwares disappeared, apple dropdown menu disabled, dock and icons missing, keyboard not functioning

    Hi. I'm in need of great help as I do not understand how this could have happened.
    I had my firefox on, with multiple tabs and windows as I was doing intense research for a paper. My screen then freezes up, but my mouse could still work. Having experienced this before, I immediately pressed and hold the power button till my macbook pro shuts down.
    After which, I switched it back on. To my horror, everything was resetted to factory settings: my desktop background was replaced, the fonts on the clock display were different. But this wasn't so bad.
    After which, I realised that my dock went missing, together with the icons. I clicked the apple drop down menu, and my screen hanged momentarily, and in that moment everything on the screen disappeared (including the upper dock) for a few seconds and appear again. Meaning, i cant click the drop down.
    Similar thing happened with my spotlight. Using the hot keys command-space, the dropdown appeared on the top right, but when i started to type, the screen disappeared and appeared again like before.
    Finally i checked my applications folder, and it seems like all the applications are missing, like they have never been installed before! Their folders are there, but the icons and apllications themselves aren't. No applications/software installed- not even the utilities and system preference softwares that came with the macbook.
    Luckily though, all my documents are safe. I just cant open them because my iworks and adobe are all missing and "not installed". I cant even access the internet. I'm doing this via my iPhone.
    So basically i cant do anything because my apple drop down menu is unreachable, so is my spotlight, and my apps/softwares like system preference, utility are all missing. Is there a way i can troubleshoot this? Or make my macbook work again? I have already restarted and shutdown and switch it back on again near five times.
    I know my explanation is long, but do help me if you can. I'm really at a lost right now...

    Hi
    Thanks for the help. I did what you advised, but it still did not work.
    The repair disk was successful. Unfortunately when the system restarted to boot my startup disk, I faced the exact same problems as I did previously. I also did a hardware test, but no problems were found.
    Even tried powering off and on the macbook pro again but the same problems remained...
    I tried to back-up my files too but they refuse to copy/move into my hard disk drive folder.
    Nothing works.
    Do you have other ideas? Or suggestions?
    Thanks so far!

  • K7N2G-L restart problem

    Hi
    If I do a cold start my system will boot up ok,but if I have to do a "restart" after installing something it boots up and the gets to the part where it says "Searching for IDE devices" and it will hang.If I power off and then on again it will boot up normaly.Apart from that it runs well...any ideas  ?(
    Athlon xp 1800+

    Running The K7N2G-ILSR  
    Antec Case, with 360 Watt power Supply.
    Dual SATA Raptor 37.5 Gig WD Drives Raided
    Dual WD 80 Gig 7200 RPM Drives
    Single Maxtor 120 Gig 7200 RPM Drive
    52x24x52x CDRW
    16X DVD Rom Drive
    Athlon XP2500+ Barton Core CPU w/Full Copper Heat Sink
    dual 512meg DDR 333 in slots 1 and 3
    Radeon 9700 Pro 8x AGO 128 Meg Video Card
    4 80mm Cooling Fans Throughout the case.
    CPU Temp runs on average between 50c - 60c
    Case Temp runs on average about 89f - 100f
    When I set this thing up I had a 300 Watt supply and it did not fully run things and did have some problems with the HD lights staying on, my guess was due to not enough power. So beefing it up to 360 Watts fixed that.
    Also had restart problems quite often, at least 3 or 4 times a day it would just reboot on its own, I run and operate a computer store , so I had the ability to try different things to fix this. Turns out the memory on the nForce chipset boards is VERY important. Brand new sticks from a variety of sources had different affects, including not counting all the memory properly, restarting randomly and not booting at all. Believe it or not, one of the cheapest memory makers on the market seems to have been the best for use in the machine and that would be the Kingston Value Ram. So, if at all possible try getting some of them and see what happens. The worst??? All Components Memory.
    You guys should also look at the 4 lights that are or should be in the back of your machine provided by MSI for your troubleshooting aids.. They do work and are quite helpful.
    Sorry for the lengthy message post, but thought maybe I could be of some help to somebody.

  • System restart error in Module pool

    Hi Experts,
    I have created one modulepool Prgram with Table control it is working fine for Display, whenever i want to try to Save i am getting system error System Restarted;Session terminated. i am attatching the screen shot of that..

    Hi Vishwanath,
    You  can use the following coding to check with your coding part.This may help you to clear your problem.
    module USER_COMMAND_0100 input.
    case sy-ucomm.
    when 'SAVE'.
    modify ztable from ztable.
    if sy-subrc = 0.
    message 'record updated succesfully' type 'S'.
    endif.
    Endcase.
    endmodule.

  • After a system restart i cannot connect to SAP with SAPGUI.

    After a system restart i cannot connect to SAP with SAPGUI.
    See attached log  "dev_disp" and "dev_w0"
    At the end of this message you can see the comparison between the
    defective system and another working system
    I notice the absence of the "IGS400" process
    Could you please help me ?
    Best regards to everybody.
    "dev_disp" log file tell me : ************************
    trc file: "dev_disp", trc level: 1, release: "640"
    Thu Jun 21 13:21:24 2007
    kernel runs with dp version 132(ext=102) (@(#) DPLIB-INT-VERSION-132)
    length of sys_adm_ext is 312 bytes
    sysno      00
    sid        SVI
    systemid   324 (IBM iSeries with OS400)
    relno      6400
    patchlevel 0
    patchno    147
    intno      20020600
    make:      single threaded, ASCII, 64 bit
    pid        380
    Thu Jun 21 13:21:27 2007
    ***LOG Q00=> DpSapEnvInit, DPStart (00 380) [dpxxdisp.c   1100]
         shared lib "dw_xml.so" version 147 successfully loaded
         shared lib "dw_xtc.so" version 147 successfully loaded
         shared lib "dw_stl.so" version 147 successfully loaded
         shared lib "dw_gui.so" version 147 successfully loaded
         shared lib "dw_mdm.so" version 147 successfully loaded
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpIPCInit2: start server >FRASTEST_SVI_00                         <
    DpShMCreate: sizeof(wp_adm)          10712     (824)
    DpShMCreate: sizeof(tm_adm)          3021432     (15032)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)          216000     (432)
    DpShMCreate: sizeof(vmc_adm)          0     (448)
    DpShMCreate: sizeof(wall_adm)          (22440/36712/56/104)
    Thu Jun 21 13:21:28 2007
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 700000080000000, size: 3337656)
    DpShMCreate: allocated sys_adm at 700000080000000
    DpShMCreate: allocated wp_adm at 700000080001830
    DpShMCreate: allocated tm_adm_list at 700000080004208
    DpShMCreate: allocated tm_adm at 700000080004230
    DpShMCreate: allocated wp_ca_adm at 7000000802e5ca8
    DpShMCreate: allocated appc_ca_adm at 7000000802ea2f8
    DpShMCreate: allocated comm_adm_list at 7000000802eba68
    DpShMCreate: allocated comm_adm at 7000000802eba80
    DpShMCreate: allocated vmc_adm_list at 700000080320640
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 700000080320668
    DpShMCreate: allocated wall_adm at 700000080320670
    MBUF state OFF
    EmInit: MmSetImplementation( 2 ).
    Thu Jun 21 13:21:29 2007
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation std
    EsIUnamFileMapInit: ES base = 0x7000000d0000000
    EsStdInit: Extended Memory 4096 MB allocated
    <ES> 1023 blocks reserved for free list.
    ES initialized.
    Thu Jun 21 13:22:33 2007
    rdisp/http_min_wait_dia_wp : 1 -> 1
    Thu Jun 21 13:22:35 2007
    ***LOG Q0K=> DpMsAttach, mscon ( FRASTEST) [dpxxdisp.c   10036]
    Thu Jun 21 13:22:36 2007
    DpStartStopMsg: send start message (myname is >FRASTEST_SVI_00                         <)
    DpStartStopMsg: start msg sent
    Thu Jun 21 13:22:47 2007
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Thu Jun 21 13:22:49 2007
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 147
    Release check o.K.
    Thu Jun 21 13:39:13 2007
    DpSigInt: caught signal 2
    DpHalt: shutdown server >FRASTEST_SVI_00                         < (normal)
    Thu Jun 21 13:39:14 2007
    ***LOG Q0I=> NiPWrite: writev (32: Broken pipe) [niuxi.c 1140]
    ERROR => MsINiWrite: NiBufSend (rc=NIECONN_BROKEN) [msxxi.c      2455]
    ERROR => MsIModState: MsINiWrite (rc=NIECONN_BROKEN) [msxxi.c      3695]
    MBUF state OFF
    MBUF component DOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Thu Jun 21 13:39:15 2007
    Stop work processes...
    Thu Jun 21 13:40:18 2007
    ERROR => DpWpKill(411, SIGUSR2): kill failed [dpxxtool.c   2462]
    Stop gateway
    Stop icman
    Terminate gui connections
    waiting for termination of work processes
    Thu Jun 21 13:40:19 2007
    waiting for termination of work processes
    Thu Jun 21 13:40:20 2007
    waiting for termination of work processes
    Thu Jun 21 13:40:21 2007
    waiting for termination of work processes
    "dev_w0" log file tell me : ************************
    trc file: "dev_w0", trc level: 1, release: "640"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    M sysno      00
    M sid        SVI
    M systemid   324 (IBM iSeries with OS400)
    M relno      6400
    M patchlevel 0
    M patchno    147
    M intno      20020600
    M make:      single threaded, ASCII, 64 bit
    M pid        404
    M
    M 
    M Thu Jun 21 13:22:00 2007
    M  ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 404) [thxxhead.c   1146]
    M  calling db_connect ...
    C  DB4 SQL Reparse Activated
    C 
    C Thu Jun 21 13:22:11 2007
    C  R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
    C  R3INLPGM: RmtExeLib is R3640ASVI
    C 
    C Thu Jun 21 13:22:13 2007
    C  Connection to database done without problems.
    C  -
    C  -
    DbSl EGO Structure
    C  -
    C     SAPSYSTEMNAME               = SVI
    C     Character encoding          = ASCII
    C     process class               = dialog process
    C     workprocess id              = 0
    C     local host                  = FRASTEST
    C     dbhost                      = FRASTEST
    C     rdbname                     =                  
    C     dbname                      = SVIFRASTEST
    C     dblib                       = R3SVIDATA
    C     application server          = DVEBMGS00
    C     Connect type                = LOCAL
    C     pid                         = 404
    C     dbjobname                   = WP00     
    C     dbjobuser                   = SVI00    
    C     dbjobno                     = 025901
    C     wpjobname                   = WP00
    C     wpjobuser                   = SVI00
    C     wpjobno                     = 025901
    C     DB2/400 vers. appl. server  = PASE 4
    C     DB2/400 vers. DB server     = V5R4                           
    C     da_cache_size               = 100
    C     reopen                      = ON
    C     timeout_retry               = 3
    C     ODP threshold               = 800
    C     ODP commit thresh.          = 810
    C     ODP open thresh.            = 850
    C     QAQQINI library             = Default (QUSRSYS)
    C     Alternate QAQQINI library   = Not specified
    C     use_lobs_for_long           = ON
    C     use_lobs_for_short          = OFF
    C     single_execution_threshold  = 2000
    C     single_execution_reuse      = OFF
    C     keep_tmp_SQLpkgs            = OFF
    C     dbsl_trace                  = off
    C     allow_cancel                = OFF
    C     nqe_optimize_method         = O - All I/O (compatibility mode)
    C     query_compl_reval           = O
    C     nte_list_size               = 10
    C  -
    C 
    C Thu Jun 21 13:22:17 2007
    C  SQL monitor started for job
    B 
    B Thu Jun 21 13:22:18 2007
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20070621 132200 FRASTEST       
    M 
    M Thu Jun 21 13:22:37 2007
    M  db_connect o.k.
    M 
    M Thu Jun 21 13:22:38 2007
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    ACTIVE TRACE LEVEL           2
    ACTIVE TRACE COMPONENTS      all, M
    M  -
    C-STACK -
    => 64 bit R/3 Kernel
    => 64 bit OS400 Kernel
    => Heap limit      = unlimited
    => Stack limit     = unlimited
    => Core limit      = unlimited
    => File size limit = unlimited
    => Heap address  = 0x40000000000000009ED34587C2E94220
    => Stack address = 0xffffffffffff3f0
    => Stack low     =  0xfffffffffffdb30
    => Stack high    =  0xffffffffffffa90
    => Stack Trace:
         Unknown at 0x3618
         sleepms() at 0x1000f9324
         SpinLockSemRq1() at 0x1000f926c
         SemRq() at 0x1000fcf6c
         ThIPCInit() at 0x1000ac1a0
         tskh_init() at 0x1000ad704
         tskhstart() at 0x1000c0950
         DpMain() at 0x10175ad2c
         nlsui_main() at 0x10172dee8
    => CPU Registers:
         msr = 0x800000000000f032     iar = 0x0000000000003618
         ctr = 0x0000000000003610      lr = 0x09000000000a2890
         xer = 0x0000000008000000      cr = 0x000000002a404445
         r00 = 0x0000000000000000     r01 = 0x0ffffffffffff3f0
         r02 = 0x00000000000000a4     r03 = 0xffffffffffffffff
         r04 = 0x0000000000000000     r05 = 0x0000000000000000
         r06 = 0x0000000000000000     r07 = 0x0ffffffffffff520
         r08 = 0x0000000000000001     r09 = 0x0000000010108003
         r10 = 0xb00010000c90e000     r11 = 0xb00010000c90ef30
         r12 = 0x0900000000001eb0     r13 = 0x0000000182784a50
         r14 = 0x0000000000000002     r15 = 0x00000001810e6c48
         r16 = 0x0ffffffffffffb28     r17 = 0x000000018001bf20
         r18 = 0x0000000000000003     r19 = 0x0000000000000004
         r20 = 0x0000000180c6de34     r21 = 0x0000000180c6de28
         r22 = 0x000000018004ce60     r23 = 0x0000000180c6e244
         r24 = 0x0000000000000064     r25 = 0x0000000000000158
         r26 = 0x0000000000000158     r27 = 0x0000000000000000
         r28 = 0x0000000000000000     r29 = 0x0fffffffffffffe0
         r30 = 0x09001000a005ec48     r31 = 0x0000000000000000
    Thu Jun 21 13:40:23 2007
    Library   |(SRV)PGM  |Module    |Function/Statement No.
    Thu Jun 21 13:40:24 2007
    |--||--
    QSYS      |QP2USER2  |QP2API    |__Qp2Fork  8
    QSYS      |QP2USER2  |QP2API    |runpase_main__FPi  6
    QSYS      |QP2USER2  |QP2API    |runpase_common__FiPvT2  2
    R3640ASVI |O4PRTLIBC |AS4STACK  |As4Stack_From_PASE  3
    R3640ASVI |O4PRTLIBC |AS4STACK  |As4StackOut  10
    R3640ASVI |O4PRTLIBC |AS4STACK  |_MATINVS2__8O4_StackFv  8
    M  -
    ACTIVE JOBS OF DEFECTIVE SYSTEM
    Opz  Sottosis/Lav  corrente    Tipo  % CPU  Funzione        Stato             
          R3_00         QSYS        SBS     0,0                  DEQW              
            DISP_WORK   SVI00       BCI     5,3  PGM-disp+work   CNDW              
            GWRD        SVI00       BCI    10,9  PGM-gwrd        RUN               
            ICMAN       SVI00       BCI     1,8  PGM-icman       RUN               
            MSG_SERVER  SVI00       BCI     0,0  PGM-MSG_SERVER  SELW              
            RSLGCOLL    SVI00       BCI     0,0  PGM-rslgcoll    SELW              
            RSLGSEND    SVI00       BCI     0,0  PGM-rslgsend    SELW              
            SAPOSCOL    SVI00       BCI     1,0  PGM-SAPOSCOL    RUN               
            SAPSTART    SVI00       BCH     0,0  PGM-sapstart    EVTW   
            WATCHDOG    SVI00       BCI     0,4  PGM-disp+work   SELW              
            WP00        SVI00       BCI     1,0  PGM-disp+work   RUN               
            WP01        SVI00       BCI     1,0  PGM-disp+work   RUN               
            WP02        SVI00       BCI     1,0  PGM-disp+work   RUN               
            WP03        SVI00       BCI     1,1  PGM-disp+work   RUN               
            WP04        SVI00       BCI     0,9  PGM-disp+work   RUN               
            WP05        SVI00       BCI     0,9  PGM-disp+work   RUN               
            WP06        SVI00       BCI     0,8  PGM-disp+work   RUN               
            WP07        SVI00       BCI     0,6  PGM-disp+work   RUN               
            WP08        SVI00       BCI     0,0                  RUN               
    ACTIVE JOBS OF WORKING SYSTEM
          R3_03         QSYS        SBS     0,0                  DEQW              
            DISP_WORK   TST03       BCI     0,0  PGM-disp+work   SELW              
            GWRD        TST03       BCI     0,0  PGM-gwrd        SELW              
            ICMAN       TST03       BCI     0,0  PGM-icman       SELW              
            IGS400      TST03       BCI     0,0  PGM-igswd_mt    THDW              
            IGS400      TST03       BCI     0,0  PGM-igsmux_mt   THDW              
            IGS400      TST03       BCI     0,0  PGM-igspw_mt    THDW              
            IGS400      TST03       BCI     0,0  PGM-igspw_mt    THDW              
            MSG_SERVER  TST03       BCI     0,0  PGM-MSG_SERVER  SELW              
            RSLGSEND    TST03       BCI     0,0  PGM-rslgsend    THDW              
            SAPSTART    TST03       BCH     0,0  PGM-sapstart    EVTW              
            WATCHDOG    TST03       BCI     0,0  PGM-disp+work   SELW              
            WP00        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP01        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP02        TST03       BCI     2,5  PGM-disp+work   RUN               
            WP03        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP04        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP05        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP06        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP07        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP08        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP09        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP10        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP11        TST03       BCI     0,0  PGM-disp+work   SEMW              
            WP12        TST03       BCI     0,0  PGM-disp+work   SEMW

    Following your suggestions i got this error message in the log file "dev_w0"
    This process creted also a very big "core" file
    B  ***LOG BY4=> sql error 304    performing FET on table DDNTF      [dbntab#7 @ 10281] [dbntab  1028 1]
    B  ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab  1028 1]
    B  *** ERROR => missing return code handler     
    caller does not handle code 1 from dbntab#7[3098]     
    Here is the complete log:
    trc file: "dev_w0", trc level: 1, release: "640"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    M sysno      00
    M sid        SVI
    M systemid   324 (IBM iSeries with OS400)
    M relno      6400
    M patchlevel 0
    M patchno    147
    M intno      20020600
    M make:      single threaded, ASCII, 64 bit
    M pid        317
    M
    M 
    M Wed Aug  1 17:53:03 2007
    M  ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 317) [thxxhead.c   1146]
    M  calling db_connect ...
    C  DB4 SQL Reparse Activated
    C 
    C Wed Aug  1 17:53:05 2007
    C  R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
    C  R3INLPGM: RmtExeLib is R3640ASVI
    C  Connection to database done without problems.
    C  -
    C  -
    DbSl EGO Structure
    C  -
    C     SAPSYSTEMNAME               = SVI
    C     Character encoding          = ASCII
    C     process class               = dialog process
    C     workprocess id              = 0
    C     local host                  = FRASTEST
    C     dbhost                      = FRASTEST
    C     rdbname                     =                  
    C     dbname                      = SVIFRASTEST
    C     dblib                       = R3SVIDATA
    C     application server          = DVEBMGS00
    C     Connect type                = LOCAL
    C     pid                         = 317
    C     dbjobname                   = WP00     
    C     dbjobuser                   = SVI00    
    C     dbjobno                     = 028178
    C     wpjobname                   = WP00
    C     wpjobuser                   = SVI00
    C     wpjobno                     = 028178
    C     DB2/400 vers. appl. server  = PASE 4
    C     DB2/400 vers. DB server     = V5R4                           
    C     da_cache_size               = 100
    C     reopen                      = ON
    C     timeout_retry               = 3
    C     ODP threshold               = 800
    C     ODP commit thresh.          = 810
    C     ODP open thresh.            = 850
    C     QAQQINI library             = Default (QUSRSYS)
    C     Alternate QAQQINI library   = Not specified
    C     use_lobs_for_long           = ON
    C     use_lobs_for_short          = OFF
    C     single_execution_threshold  = 2000
    C     single_execution_reuse      = OFF
    C     keep_tmp_SQLpkgs            = OFF
    C     dbsl_trace                  = off
    C     allow_cancel                = OFF
    C     nqe_optimize_method         = O - All I/O (compatibility mode)
    C     query_compl_reval           = O
    C     nte_list_size               = 10
    C  -
    C 
    C Wed Aug  1 17:53:09 2007
    C  SQL monitor started for job
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20070801 175303 FRASTEST       
    M 
    M Wed Aug  1 17:53:12 2007
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I 
    I Wed Aug  1 17:53:13 2007
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF               (addr: 700000200000000, size: 4400128)
    M 
    M Wed Aug  1 17:53:14 2007
    M  SHM_ROLL_AREA          (addr: 700000210000000, size: 268435456)
    M 
    M Wed Aug  1 17:53:15 2007
    M  SHM_PAGING_AREA          (addr: 700000220000000, size: 67108864)
    M  SHM_ROLL_ADM               (addr: 700000230000000, size: 2672386)
    M  SHM_PAGING_ADM          (addr: 700000240000000, size: 164896)
    M 
    M Wed Aug  1 17:53:16 2007
    M  ThCreateNoBuffer          allocated 324144 bytes for 1000 entries at 700000250000000
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 7440 bytes (50 server) at 700000260000000
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    X  ES initialized.
    B 
    B Wed Aug  1 17:53:20 2007
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 13, CON_ID = -1
    B 
    B Wed Aug  1 17:53:25 2007
    B  dbtbxbuf: Buffer TABL  (addr: 7000002d0000100, size: 64000000, end: 7000002d3d09100)
    B  dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 31427136
    B  ***LOG BB0=> buffer TABL       started with length 64000000   bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
    B 
    B Wed Aug  1 17:53:26 2007
    B  dbtbxbuf: Buffer TABLP (addr: 7000002e0000100, size: 16776192, end: 7000002e0fffd00)
    B  dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 8322944
    B  ***LOG BB0=> buffer TABLP      started with length 16776192   bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
    B  dbtbxbuf: Reading TBX statistics:
    B  dbtbxbuf: Opening /usr/sap/SVI/DVEBMGS00/data/tbxnew failed (No such file or directory).
    B  dbtbxbuf: Renaming /usr/sap/SVI/DVEBMGS00/data/tbxnew to /usr/sap/SVI/DVEBMGS00/data/tbxstat failed (No such file or directory).
    B  dbtbxbuf: 110 object entries precreated
    B  Layout of EIBUF buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 360 = 360
    B  2: 13 * 40 = 520
    B  3: 8009 * 40 = 320360
    B  4: 4000 * 160 = 640000
    B  5: 8009 * 8 = 64072
    B  6: 1 * 200 = 200
    B  7: 65 * 8 = 520
    B  8: 319664 * 128 = 40916992
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer EIBUF (addr: 700000300000108, size: 41943040, end: 700000302800108)
    B  ***LOG BB0=> buffer EIBUF      started with length 40960k     bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
    B  Layout of ESM   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 360 = 360
    B  2: 13 * 40 = 520
    B  3: 4001 * 40 = 160040
    B  4: 2000 * 160 = 320000
    B  5: 4001 * 8 = 32008
    B  6: 1 * 200 = 200
    B  7: 65 * 8 = 520
    B  8: 28755 * 128 = 3680640
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer ESM   (addr: 700000310000108, size: 4194304, end: 700000310400108)
    B  ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
    B  Layout of CUA   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 360 = 360
    B  2: 13 * 40 = 520
    B  3: 16411 * 40 = 656440
    B  4: 8191 * 160 = 1310560
    B  5: 16411 * 8 = 131288
    B  6: 1 * 200 = 200
    B  7: 193 * 8 = 1544
    B  8: 57325 * 256 = 14675200
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B  dbexpbuf: Buffer CUA   (addr: 700000320000108, size: 16776192, end: 700000320fffd08)
    B  ***LOG BB0=> buffer CUA        started with length 16383k     bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
    B  Layout of OTR   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 360 = 360
    B  2: 13 * 40 = 520
    B  3: 4001 * 40 = 160040
    B  4: 2000 * 160 = 320000
    B  5: 4001 * 8 = 32008
    B  6: 1 * 200 = 200
    B  7: 81 * 8 = 648
    B  8: 28754 * 128 = 3680512
    B  Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
    B 
    B Wed Aug  1 17:53:27 2007
    B  dbexpbuf: Buffer OTR   (addr: 700000330000108, size: 4194304, end: 700000330400108)
    B  ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
    B  ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#2 @ 2212] [dbcalbuf2212 ]
    C 
    C Wed Aug  1 17:53:29 2007
    C  *** ERROR => Error 304 in function db_fetch
    [dbsldb4.cpp  9041]
    C  === DBSL Begin of SQL request after execution ===
    C  === DBSL SQLP0400 ===
    C  Function              5
    C  Package               DDNTFIH             Library               R3SVIA2062
    C  Main_Pgm                                  Main_Lib                                 
    C  Statement_Name        "Wx3AAADpDB"        Cursor_Name           "CADDNTF16461"     
    C  Open_Options          x80                 Clause_For_Describe   N
    C  Commitment_Control    C
    C  Date_Format           USA                 Date_Separator        /
    C  Time_Format           USA                 Time_Separator        :
    C  Naming_Option         SYS                 Decimal_Point         .
    C  Blocking_Factor       1                   Scrollable_Option     0                  
    C  Position_Option       0                   Relative_Record       0                  
    C  Rows_To_Insert        0                   Direct_Map            N
    C  Reuse_DA              N                   Name_Check            Y
    C  Use_Ptrs              0                   With_Hold             N
    C  Close_File_Name                           Close_Library_Name    *THRESHOLD         
    C  Reopen                0                   Use_Perf              1
    C  Query_Compl. (Reval)  !                   Statement_Text_CCSID  819
    C  Sort_Sequence_Table   *JOB                Sort_Sequence_Library *LIBL              
    C  Language_ID           *JOB                Allow_Copy_Data       S                  
    C  Allow_Blocking        L
    C  === DBSL SQLDA ===
    C  sqldaid: SQLDA 2 , sqldabc: 816, sqln: 10, sqld: 4
    C  === TRACE VAR 0 ===
    C  sqlvar: 0, sqtype 469, sqllen 30, sqlname.data 13488
    C  sqlind: 0
    C  sqlname (hex):
    C  0008000034B00000  0000000000000000  0000000000000000  0000000000000000 
    C  sqldata row=0 (hex):
    C  005400430041004C  0053002000200020  0020002000200020  0020002000200020 
    C  0020002000200020  0020002000200020  0020002000200020  00200020
    C  === TRACE VAR 1 ===
    C  sqlvar: 1, sqtype 501, sqllen 2, sqlname.data 0
    C  sqlind: -2
    C  sqlname (hex):
    C  0000000000000000  0000000000000000  0000000000000000  0000000000000000 
    C  sqldata row=0 (hex):
    C  0000
    C  === TRACE VAR 2 ===
    C  sqlvar: 2, sqtype 497, sqllen 4, sqlname.data 0
    C  sqlind: -2
    C  sqlname (hex):
    C  0000000000000000  0000000000000000  0000000000000000  0000000000000000 
    C  sqldata row=0 (hex):
    C  00000031
    C  === TRACE VAR 3 ===
    C  sqlvar: 3, sqtype 405, sqllonglen 32700
    C  sqldatalen NULL
    C  sqlind: 0
    C  sqlname (hex):
    C  00080000FFFF0000  0000000000000000  0000000000000000  0000000000000000 
    C  sqldata row=0 (hex):
    C  0000028742000007  4100000000010000  0000280001000000  0100010000004944 
    C  0000000000000000  0000000000000000  0000000000000000  00000000004B4142 
    C  === DBSL errc ===
    C  errc: OK
    C  === DBSL sqlca ===
    C  sqlcode: 304
    C  sqlerrml: 68, sqlerrmc:
    C  00035CD540404040  4040404040404040  4040404040404040  4040404040404040 
    C  4040404040404040  4040404040404040  4040404040404040  4040404040404040 
    C  40400006
    B  ***LOG BY4=> sql error 304    performing FET on table DDNTF      [dbntab#7 @ 10281] [dbntab  1028 1]
    B  ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab  1028 1]
    B  *** ERROR => missing return code handler     
    caller does not handle code 1 from dbntab#7[3098]     
    ==> calling sap_dext to abort transaction
    [dbeh.c       93]
    M  -
    C-STACK -
    => 64 bit R/3 Kernel
    => 64 bit OS400 Kernel
    => Heap limit      = unlimited
    => Stack limit     = unlimited
    => Core limit      = unlimited
    => File size limit = unlimited
    => Heap address  = 0x40000000000000009E570787C2ED4260
    => Stack address = 0xfffffffffffd6f0
    => Stack low     =  0xfffffffffffd6f0
    => Stack high    =  0xffffffffffffa90
    => Stack Trace:
         AixStack() at 0x10008d040
         CTrcStack2() at 0x10008d138
         ThControl() at 0x1006551a4
         dyThControl() at 0x1003ab070
         dextIntern() at 0x1003aa06c
         sap_dext() at 0x1003aff24
         dbeh_exit() at 0x100416924
         db_ntab() at 0x10039d48c
         read_ntab() at 0x101512474
         db_cbufload() at 0x10150f40c
         reset_handling() at 0x101512f00
         init_shm_and_load_cals() at 0x10151394c
         db_cbufinst() at 0x101514c48
         db_calinit() at 0x1005ae8bc
         db_init() at 0x1001c7ae0
         ThCallHooks() at 0x1000c3654
         ThIPCInit() at 0x1000ac574
         tskh_init() at 0x1000ad704
         tskhstart() at 0x1000c0950
         DpMain() at 0x10175ad2c
         nlsui_main() at 0x10172dee8
    Wed Aug  1 17:53:29 2007
    Library   |(SRV)PGM  |Module    |Function/Statement No.
    |--||--
    QSYS      |QP2USER2  |QP2API    |__Qp2Fork  8
    QSYS      |QP2USER2  |QP2API    |runpase_main__FPi  6
    QSYS      |QP2USER2  |QP2API    |runpase_common__FiPvT2  2
    R3640ASVI |O4PRTLIBC |AS4STACK  |As4Stack_From_PASE  3
    R3640ASVI |O4PRTLIBC |AS4STACK  |As4StackOut  10
    R3640ASVI |O4PRTLIBC |AS4STACK  |_MATINVS2__8O4_StackFv  8
    M  -
    M  ***LOG R1B=> ThControl, sap_dext-call (00 ) [thxxdynp.c   355]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThControl: illegal sap_dext call !!! (step 1, th_errno 5, action 1, level 1) [thxxhead.c   9564]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M  Entering ThSetStatError
    M  Entering ThReadDetachMode
    M  ThISend: still inside critical section semaphore ?

  • Unable Install Bootcamp 2.0 OS X 10.5 - Error "A system restart is pending"

    We are using Bootcamp Beta 1.4 on a Macbook Pro with Windows Vista installed without any problems. We have succesfully upgraded to OS X 10.5 and tried to upgrade the Windows drivers. This fails with the message
    "A system restart is pending. Complete the restart and then retry this installation."
    Rebooting does not make any difference.
    Starting the install process with logging enabled via
    msiexec /i Bootcamp.msi /l*v c:\Bootcamp.log
    does not give more clues (at least for us). An error code 1603 ("Fatal Installer Error" is generated.

    I had the same problem with Vista Business 32bit. Fixed it by removing the data in PendingFileRenameOperations registry key:
    1. Start -> execute "regedit"
    2. Search through keys to find the string "PendingFileRenameOperations"
    3. Double click on the registry key and remove everything that is in there
    Then run cmd.exe from explorer as administrator (right click -> run as administrator) and manually start the msi from that commandline.
    Apple has been on my sh*tlist for quite a while now, and things are getting worse. I had to buy Leopard just to obtain the current bootcamp drivers, after having spent a premium to purchase their hardware. Turns out the trackpad is still not properly supported in Windows.
    I'm back to Thinkpads, even if it's Lenovo now. The quality is even better than MacBooks, they run windows natively and I don't have to deal with nonexistent customer support.

  • System restarting by its self?????

    hi there , specs are
    psu hyena 350w , 3.3v-28a ,5v-35a ,12v-16a
    km4m-v mobo
    amd athlon xp 2800+
    80g samsung ata hdd
    btc 16x dvd burner
    cyberdrv 52-24-52 cd burner
    lcd temp display
    thermaltake hsf
    northbridge fan
    win 98se
    nortons internet security
    temps are no-load 38 degrees - high load 45 degrees un the lcd display
    the problem im having is that for an unknown reason the system restarts by its self at the wierdest times , it is unaffected by cpu load or drive activity , it usually only happens when internet explorer is running , there is no "system shutting down" warning , you would swear that i have hit the reset button its that quick , this is getting to be extremly frustrating as i have tried everything i know to trace the source of the prob with no sucess
    any help or suggestions are greatly appreciated
    thank you
    corry

    just got xp running , installed sp2 and updated , runs alot better , cpu usage is alot lower and memory usage is consistently below 30% , but the sblive software i have got wont run , have tried running in 98-me compatibility mode and still no joy , oh well !! , i am using an adsl broadband external modem through the lan port , letting windows autodetect it
    with the sata drives , will the mobo detect them as the primary drives or are they user selectable in the bios?? , i would like to run the sata drive i have just got (samsung 120g) as the primary and the 80g ata as a backup drive , is this advisable?? what do you guys think??
    thank you for your help
    corry

  • 10.4.11 update - restart problem

    Hi everyone,
    Sorry if someone else has posted this, but I couldn't find a similar problem on the forum.
    Since updating a few days ago, my mac no longer stays permanently shutdown, but restarts itself around 30min after shutdown.
    I have run the combo update, verified disk (no problems), verified and repaired permissions, checked all the energy saver preferences were correct etc., but the problem is still occurring.
    Can anyone advise what might be done to remedy this?
    Thanks very much.
    Mike

    i just installed the update 10.4.11. i don't have a restart problem but now these applications wont start:
    mail
    itunes
    ichat
    safari
    apple/software update
    i try from the dock, from the apps folder, nothing. they bounce once and thats it.
    please help!
    just found this is the crash report log:
    Command: Mail
    Path: /Applications/Mail.app/Contents/MacOS/Mail
    Parent: WindowServer [65]
    Version: 2.1.1 (752.3)
    PID: 399
    Thread: Unknown
    Link (dyld) error:
    Library not loaded: /usr/lib/libgcc_s.1*dylib
    Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
    Reason: image not found
    and:
    Command: Safari
    Path: /Applications/Safari.app/Contents/MacOS/Safari
    Parent: WindowServer [65]
    Version: 3.0.4 (523.12)
    PID: 388
    Thread: Unknown
    Link (dyld) error:
    Library not loaded: /usr/lib/libgcc_s.1*dylib
    Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
    Reason: image not found
    Message was edited by: skrauntor

  • Insufficient permissions for system restart

    Hi All,
    We are receiving the following error when attempting to restart a domain controller, after MS updates have been installed, from within SCCM 2012 R2 CU1 software center.
    "Insufficient permissions for System Restart"
    "Restarting this computer is only allowed for users with administrative permissions, or your IT department does not allow you to restart this computer"
    The user on the domain controller can restart the server using a normal windows shutdown procedure outside of the software center, as they are in the Active Directory domain "backup operators" group.
    The domain controller is running server 2008 R2 SP1.  The SCCM 2012 infrastructure is running R2 CU1 with the latest client installed on the domain controller.
    Any help would be very much appreciated.
    Regards PowerShell90

    Hi Garth,
    Thanks for the quick reply
    Domain administrators can install the updates and reboot within software centre without a problem.  No restrictions have been put in place for the domain controllers or backup operators.  We allow the Microsoft default option to allow members of
    the domain "Backup Operators" to shut down domain controllers.  They are able to do this on the DC, but they get an error when trying to complete this through SCCM 2012 R2 CU1 software centre.  I can't understand why?
    Regards
    Regards PowerShell90

  • Restart Problem Fix for Mega 865

    Just letting people know how I fixed my Mega 865 restart problems
    my quick story
    I built my 865 with 512RAM and installed XP MCE2005. The next day I installed a 1 GIG RAM chip and the system would not boot into XP. It would get to the windows boot screen and crash when loading the hard drive drivers.... or somewhere around there. couldnt even get into safe mode. I removed the Radeon 9800 and it booted. oh no could it be the AGP Card?
    well I put it back in and tried every thing,
    removed the new 1 GIG RAM, same problem
    reset BIOS
    reset to Safe Settings BIOS
    reset to Optimal BIOS
    repair XP recovery console, fix MBR ...etc
    then I the BIOS I tried dropping the AGP Aperature size from 64MB down to 8MB. It fixed the problem.
    I'm guessing the issue is really one of power. the PSU is only 230w and with the extra ram stick, it had problems putting out enough power.
    so I dropped the agp aperature down to 8MB (shouldnt matter as the card has 128MB and hopefully shouldnt need system RAM)
    I also turned off the serial port (set it to disabled - who uses the serial port anyway)
    and disabled the modem and network card (dont need the modem and I'm using the wireless card instead of the ethernet one)
    hopefully turn these things off will prevent furthur power issues when running games and stuff.

    the prescott core P4s are hot enough as it is, without squeezing a 3.2ghz in there, along with a hot GPU
    i would recommend the northwood core P4, as they run cooler and are just as good as prescott P4s as tests have shown
    and i would also advise you to search through this forum for topics about mega 180 heat issues; the issues will apply to all mega series, just seems to cause more of a problem with the 180, but most ideas will apply to 865
    first thing to check is airflow, make sure that there are no cable looms in front of heatsink, obstructing airflow to the fan. bear in mind too that by default, the fan is already blowing hot air off the AGP card onto the heatsink (yes, poor design by MSI but it can be resolved apparently by "reversing" fan airflow).

Maybe you are looking for