HP Blade System Enclosure Monitor Service hanging the system

Hello,
I noticed check the Memory usage on the RMS server
HPBladeSystemEnclosureMonitorService is using 26 GB RAM is it usual? should it be externalized?
it seems to take too much but not sure the needs.
HP BladeSystem Enclosure Monitor Service for HP c-Class BladeSystem Enclosures
SCOM 2007 R2 - 24 Enclosures
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

This is the Service Manager forum. Looks like you are asking a SCOM question. SO head over to the SCOM forums instead. SCOM 
Cheers,
Thomas Strömberg
System Center Specialist
Blog:  
Twitter:   LinkedIn:
Please remember to 'Propose as answer' if you find a reply helpful

Similar Messages

  • OVM Linux service hangs the system reboot

    System:
    Oracle VM Manager
    Version: 3.1.1.305
    Hello everybody,
    I have the script to start the node manager on system reboot on run level 2. After rebooting my VM I can’t log on with putty anymore. So I opened the console with my RealVNC from OVM Manager and rebooted the system and I can see this service hangs the boot process.
    I was able to open the boot menu in console but I don’t know how to select option “e” (edit the commands before booting) or “c” for command-line.
    Is there any other way to stop this process ( control-c doesn't work either) and continue booting the system?
    Any help will be appreciated.
    Thanks,
    Alex

    Hello
    If the VM is paravirtualized, then you won't see the grub to press e and edit the boot option.
    What you can do, is change the boot from disk to network and use the network process you used to install, but go to rescue mode.
    Does this helps?
    Alvaro

  • App-V service hang - monitoring options

    Hello, 
    Sometimes the Application Management Service hang and users are unable to launch applications.
    This hang is not picked up by monitoring the service, because it has status running.
    Are there event logs or anything else I can monitor to pick up these hangs?

    It could be done automatically, powershell has some capapbilities to get entries from files and event viewer; however the challenge is to identify an issue the right way.
    As a starting point you should check the event log and/or log file manually to see if there are certain errors poping up frequenctly before your service hangs; then you could script an alert that for instance fires a mail or whatever when error XYZ appeard
    3 times in a minute on a server and run that as a scheduled tasks.
    For System Center Operations Manager there is an Management Pack for App-V 4 available, but I'm not sure how 'good' it is and if it can be used as a baseline for other monitoring solutions:
    SCOM Managamenet Pack for App-V 4
    ... and before someone else asks: there is one for
    App-V 5 as well: 
    Falko
    Twitter
    @kirk_tn   |   Blog
    kirxblog   |   Web
    kirx.org   |   Fireside
    appvbook.com

  • Hard drive works, but when plugged in hangs the system

    First of all, since this is not a Linux-specific problem I'm not sure this is the right place for this post.
    Anyway, for the past few years I've been using a 250GB IDE hard drive mostly to store backups on.  For quite a while it worked fine, but when  plugged in again after being removed so I could clean out the dust in my PC it didn't work quite right anymore.  It caused the system to hang and gave error messages remniscent of those detailed on this page.  After some fiddling it worked OK for a while, and then one day it randomly did this again.  I took the ribbon cable out, then the hard drive, and realized one of the pins was pushed in (at the time I thought it was broken).  After some reading I decided to sacrifice a ribbon cable.  What I did was yank a pin off of an old DVD drive that doesn't work and shoved it in the cable where the short pin was.  I made sure it was seated well, plugged in in, and hoped for the best.  To my delight it worked without a hitch for maybe a year or more.
    And then a little more than a month ago we had lightning strike a power line outside of our house and it fried my motherboard.  I now have a replacement board, but after all of the taking apart and moving around and stuff, the hard drive is back to its old antics.  The pin-in-the-cable trick wasn't working anymore.  After I realized that the pin wasn't broken half-way but rather pushed in, I grabbed some needlenose pliers and pulled it out.  It now will plug into any ribbon cable just fine and the computer recognizes it, but it's slow at POST and hangs the system when booting the OS, whether it be Linux or Windows.  Knoppix CDs boot just fine, although slower.  S.M.A.R.T. sees no problems.
    Basically I'm wondering 2 things.  First of all, is there anything I can do to get around the hangs?  And second, I'm considering buying an external hard drive enclosure for regular 3.5 inch hard drives and using it as an external USB drive.  Since the drive does still work and I can add/remove stuff while booted in Knoppix, and the main issue seems to be my system hanging, I figure, maybe, I can just plug in the drive when I need it after the computer is already booted up and it will work fine.  Does this sound like a reasonable expectation?

    What you hear may sound like it's the hard drive, but it's really an electronic type of noise. Same with my PB. Try what BGreg said, and wait for the drive to spin down - you'll still hear the noise.
    There was a thread about this issue several months ago, and IIRC the conclusion was that it's a normal noise, and that you should just ignore it if possible.
    If you must make it quieter, set processor performance to the lowest setting in Energy Saver preferences. But it's not going away completely.

  • SPP 4.30 windows could not start the rwd uperform monitoring service

    Hi, i just install spp 4.30 with two servers, one for the sql databases, and the other for the search server and vignette.
    Windows server 2008. 64 bits
    All the installation was ok, but when you try to configure the server it doesn't show the web page.
    The rwd uperform monitoring service can not start and send the following error:
    Windows could not start the rwd uperform monitoring service error 1067.
    Any ideas.
    thanks
    Edited by: Idel Gorodezky on Jun 26, 2011 3:14 AM

    Hi, thanks for the Help, i am sending the logs.
    - <Log>
    - <Entry Type="Error" Id="f19c1f86-8e6e-4bee-8c18-312e7edb23d2">
      <Date>6/27/2011 1:23:09 AM</Date>
      <ThreadID>9</ThreadID>
      <ErrorCode>24-01-014</ErrorCode>
      <RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
      <FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
      <Message>The remote server returned an error: (401) Unauthorized.</Message>
      <StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
      <Parameters />
      </Entry>
    - <Entry Type="Error" Id="2a9ca666-2f94-4cb0-86e9-62254c21e2ec">
      <Date>6/27/2011 5:39:02 AM</Date>
      <ThreadID>9</ThreadID>
      <ErrorCode>24-01-014</ErrorCode>
      <RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
      <FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
      <Message>The remote server returned an error: (401) Unauthorized.</Message>
      <StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
      <Parameters />
      </Entry>
    - <Entry Type="Error" Id="7c26d18a-fadf-49f1-8f0f-881ea4d33fa0">
      <Date>6/27/2011 10:59:44 AM</Date>
      <ThreadID>9</ThreadID>
      <ErrorCode>24-01-014</ErrorCode>
      <RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
      <FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
      <Message>The remote server returned an error: (401) Unauthorized.</Message>
      <StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
      <Parameters />
      </Entry>
    - <Entry Type="Error" Id="0bd8fe26-8265-4b2e-a192-0b6513eb5ad8">
      <Date>6/27/2011 12:01:15 PM</Date>
      <ThreadID>9</ThreadID>
      <ErrorCode>24-01-014</ErrorCode>
      <RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
      <FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
      <Message>The remote server returned an error: (401) Unauthorized.</Message>
      <StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
      <Parameters />
      </Entry>
    - <Entry Type="Error" Id="b8b0694b-5214-4871-9bc6-b8af11dadf6f">
      <Date>6/27/2011 1:06:19 PM</Date>
      <ThreadID>9</ThreadID>
      <ErrorCode>24-01-014</ErrorCode>
      <RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
      <FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
      <Message>The remote server returned an error: (401) Unauthorized.</Message>
      <StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
      <Parameters />
      </Entry>
    - <Entry Type="Error" Id="370efaa4-1f71-413c-a027-126b31693932">
      <Date>6/27/2011 4:17:07 PM</Date>
      <ThreadID>9</ThreadID>
      <ErrorCode>24-01-014</ErrorCode>
      <RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
      <FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
      <Message>The remote server returned an error: (401) Unauthorized.</Message>
      <StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
      <Parameters />
      </Entry>
      </Log>
    <configuration>
      <appSettings>
        <add key="DataSource" value="fifcrsppdb01" />
        <add key="Database" value="uperformGlossarydef" />
        <add key="DatabaseEngine" value="SQLserver" />
        <add key="DatabasePort" value="1433" />
        <add key="DatabaseSchema" value="glossaryPublic10" />
        <add key="ConnectionModifier" value=";pooling=false" />
        <add key="DatabasePassword" value="Zn4Od3shJCfR6hrx0ALMNg==" />
        <add key="DatabaseUser" value="glossaryPublic10" />
        <add key="Flags" value="0" />
        <add key="SMTPServer" value="172.16.3.114" />
        <add key="SMTPDomain" value="16.3.114" />
        <add key="HostName" value="FIFCRSPPAP01.ccr.co.cr" />
        <add key="HostPort" value="80" />
        <add key="HostProtocol" value="http" />
        <add key="GlossaryEnabled" value="True" />
        <add key="GlossaryUseRTF" value="True" />
        <add key="GlossaryDefaultLanguage" value="en-US" />
        <add key="VignetteIntegrated" value="True" />
        <add key="InstallLocation" value="C:\Vignette\Collaboration\" />
        <add key="ErrorLog" value="WWW\uPerformWS\logs\ServerErrors.xml" />
        <add key="DataFolder" value="WWW\RWD\Data\" />
        <add key="LibraryStructure" value="en-US_rwdDocLib.xml" />
        <add key="WorkingLocation" value="WWW\uPerformWS\WorkingFolder\" />
        <add key="ErrorMaxSize" value="1000000" />
        <add key="ErrorHistory" value="30" />
        <add key="GlossaryQueue" value=".\private$\GlossaryQueue" />
        <add key="PublishingQueue" value=".\private$\PublishingQueue" />
        <add key="ImportExportQueue" value=".\private$\ImportExportQueue" />
        <add key="ErrorQueue" value=".\private$\ErrorQueue" />
        <add key="UserManagementQueue" value=".\private$\UserManagementQueue" />
        <add key="Transforms" value="WWW\uPerformWS\ms\PublishingData\Base Static\xml\transforms" />
        <add key="CurrentVersion" value="4.30" />
        <add key="TrustAllCertificates" value="True" />
        <add key="WebRequestTimeout" value="600000" />
        <add key="LdapAuthentication" value="ServerBind" />
        <add key="WordtoHTML" value="True" />
        <add key="WordtoPDF" value="True" />
        <add key="PPTtoPDF" value="True" />
        <add key="ExceltoPDF" value="True" />
        <add key="WordtoSource" value="True" />
        <add key="PPTtoSource" value="True" />
        <add key="ExceltoSource" value="True" />
        <add key="PublishedContent" value="WWW\ucontent\" />
        <add key="PublisherConfig" value="WWW\uPerformWS\ms\PublishingData\configuration files\transformation.settings" />
        <add key="Templates" value="WWW\uPerformWS\ms\PublishingData\Base AppData\templates\" />
        <add key="BaseStatic" value="WWW\uPerformWS\ms\PublishingData\Base Static\" />
        <add key="BaseAppData" value="WWW\uPerformWS\ms\PublishingData\Base AppData\" />
        <add key="PensListenerPath" value="WWW\uPerformWS\" />
        <add key="Upgrade" value="WWW\uPerformWS\ms\PublishingData\Upgrade\" />
        <add key="EnableDocSIM" value="True" />
        <add key="EnableDocXHTML" value="True" />
        <add key="EnableDocPDF" value="True" />
        <add key="EnableDocWORD" value="True" />
        <add key="EnableDocPPT" value="True" />
        <add key="EnableCourseSIM" value="True" />
        <add key="EnableCoursePDF" value="True" />
        <add key="EnableCourseWORD" value="True" />
        <add key="EnablePPTXsource" value="True" />
        <add key="EnablePPTXpdf" value="True" />
        <add key="EnableXLSXsource" value="True" />
        <add key="EnableXLSXpdf" value="True" />
        <add key="EnableDOCXsource" value="True" />
        <add key="EnableDOCXhtml" value="True" />
        <add key="EnableDOCXpdf" value="True" />
        <add key="SystemPassword" value="" />
        <add key="IntegrationEnabled" value="False" />
        <add key="IntegrationUserName" value="" />
        <add key="IntegrationPassword" value="" />
        <add key="IntegrationURL" value="" />
        <add key="IntegrationOutgoingPolicy" value="" />
        <add key="IntegrationIncomingPolicy" value="" />
        <add key="PolicyFile" value="WWW\uPerformWS\wse3policyCache.config" />
        <add key="WebRequestQueryString" value="SMSESSION=NO" />
        <add key="SiteMinderCookie" value="SMCHALLENGE" />
        <add key="SiteMinderDomain" value="" />
        <add key="TivoliCookieName" value="" />
        <add key="TivoliCookieDomain" value="" />
        <add key="TivoliWebSEALJunction" value="" />
        <add key="TivoliWebSEALBaseURL" value="" />
        <add key="AuthenticationType" value="Basic" />
        <add key="LDAPTimeout" value="10" />
        <add key="UserPageSize" value="2000" />
      </appSettings>
    </configuration>

  • Connecting " HP Blade System C7000 enclosure" to Cisco Switch

    Dear
    We moved our data center from on place to another .The network cabinet includes " HP Blade System C7000 enclosure". we have two vlans , one of them is DMZ. In the old place , the HP Blade was connected to two Cisco switches ,on one of them DMZ port was configered and on the another Cisco switch non-DMZ port was configured .Now our  " HP Blade System C7000 enclosure" use one CISCO switch and the DMZ and non-DMZ ports are configured on the same CISCO switch and when we restart any server from any vlan ,the server will not be able to connect to the network although all of the servers have static IPs.
    and after logon to the server , a message appears telling us there is a conflict with the mac address of the gateway. the same mac address conflicts when restarting any server from any vlan.
    Would you help?
    Thanks

    I'd suggest asking your question in the Enterprise section of HP's support forums.
    This section is for consumer devices.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections (any ideas???)

    regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you

    Hi Jason
    I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
    the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
    I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
    Just a thought, obviously try at your own risk but it worked for me.
    Kellen

  • How to install ftp service on the system?

    OS: SuSE Linux Enterprise Server 8
    How to install ftp service on the system?
    How to check and modify to use it?
    I am not able to use FTP.
    Regards,
    D

    Rohit,
    If its about installation/Deployment of Agent- then its through SDM,
    'configuration' can be manual or Atuomatic:
    Manual-> refer the installation Guide which digesh has mentioned -(from page 20).
    Automatic- Its through Diagnostics Setup through Solman -(Its bit easy).
    Thanks,
    Jagan

  • Transport Webi Reports and Web services as the backend of dashboards from BO Production to BO Development system

    Hello Experts,
    I am working on SAP BO 4.1. I have made several dashboards on top of web services ie;Web Service Method. I have 2 systems in BO ie; Development and Production Systems.The BW production system is connected to BO Development and Production both.
    The Webi reports are made on top of BI BEx Query. From the webi reports, BI Web Services are made on top of which the dashboards are made further.
    The Webi Reports, Web Services and the Dashboards everything is made directly in BO Production.
    My question is, Can I transport the Webi Reports and the Web Services from BO Production to BO Development?
    And If yes, will it have any other impact on webi reports, web services or dashboards?
    Thanks & Regards,
    Alfred Thomas

    Hi Gill,
    As per your reply,with the promotion managament i have make the web services again manually in Dev system...Right?
    Is there any way possible that i can transport the webservices and the webi reports usind Query AS A Web Service Designer. And if yes, through this QAAWS will the WSDL or the URL required for the web services in the connection button in dashboards will automatically updated or changed as per the Development System?
    But i am not able to enable the "Deploy to Other servers Option" in QAAWS.
    Can you please help?
    Regards,
    Alfred thomas

  • I am sending my macbook pro in for service.  The warranty co says i need to send a recovery disk to have my operating sys reinstalled if needed.  Are there recovery disks for my system?

    I am sending my macbook pro in for service.  The warranty co says i need to send a recovery disk to have my operating sys reinstalled if needed.  Are there recovery disks for my system?

    pammyjoh wrote:
    I am sending my macbook pro in for service.  The warranty co says i need to send a recovery disk to have my operating sys reinstalled if needed.  Are there recovery disks for my system?
    "Are there recovery disks for my system?"
    Don't know. You have not told us what system you have.

  • QM error "The user profile service service failed the logon. No more threads can be created in the system."

    Hi,
    I've a client running QM 8.x. QM is working and all recordings are present, it's just that when logging into the server, following error mesasge is displayed:
    The user profile service service failed the logon.
    No more threads can be created  in the system.
    Any suggestions on this issue will be greatly appreciated.
    thanks,
    Kapil

    Hi,
    Thanks for your post.
    Please check event viewer if there are some error logs?
    Meanwhile, there is a similar thread has been discussed:
    Receiving error about "no more threads"
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/9a9e22e4-d947-4d19-b06c-aaadda624dbc/receiving-error-about-no-more-threads?forum=winservergen
    Regards.
    Vivian Wang

  • Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

    Dear Technet,
    Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
    My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
    even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
    Help me please.. thank you.
    Regards
    Shamil

    Hi,
    Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
    The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
    of the local Administrators group.
    If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
    user right.
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • What function does the APS service: Web Intelligence Monitoring Service perform?

    When creating an Adaptive Processing Server, one of the services that can be selected is: Web Intelligence Monitoring Service.  What exactly is this service monitoring?
    Is it monitoring the APS itself when chosen?  Or as the name implies, is it monitoring Web Intelligence Processing Servers?
    Under properties, there are configuration options for this server ( i.e. Enable Monitoring checkbox ).  Are there any best practices when this service should be selected for an APS or not?
    Thanks

    Swapnil and Shwetabh, thanks for your replies. 
    Using the Monitoring Service as an example, I know:
    - If the Monitoring Service is running on an APS, then Monitoring ( under CMC ) will work
    - if the Monitoring Service is NOT running on an APS, then Monitoring ( under CMC ) will NOT work
    For Web Intelligence Monitoring Service,
    - if this is running on any APS, when benefit do we get?  Are there monitoring logs it creates anywhere?
    - if this is NOT running on any APS, what are we missing?
    In our environment we have followed APS best practices ( as per link Swapnil refereneced ) and have split services across multiple Adaptive Processing Servers.  We have 2 nodes clustered together with a total of 16 different Adaptive Processing Servers of which 12 have the Web Intelligence Monitoring Service.  In addtion, we are running 5 instances of the Web Intelligence Processing Server across both nodes.  Without understanding what purpose the Web Intelligence Monitoring Service serves, I find it difficult to determine how many of our APS should have the Web Intelligence Monitoring Service.
    If we only have 5 Web Intelligence Processing Servers, does it make sense to have 12 APS with the Web Intelligence Monitoring Service?
    Thanks
    Rick

  • Monitoring responses from the System

    we have created a new system and want to monitor responses from the system.
    Is there any way to set up a rule when the notfication is going to be sent?
    TIA

    What is meant by USM? How we can use it EM grid control Rel3

  • Deploying multiple central sites sharing the same edge, persistent chat and monitoring services

    Hi,
    We've already one central site and multible branches that have SBS installed ,we're planning to replace these SBSs with standard edition servers to reduce the dependencies on the FE and BW that are located in the central site but that all will share the
    same Edge ,Persistent chat and Monitoring roles located in the Main site.
    What points we should take care of while making these changes regarding the following:
    1- Reverse Proxy
    2- DNS records
    3- Edge configuration and communication with the branch sites
    4- Persistent Chat communication with the branch sites
    5- Monitoring services which is coallocated on the main FE
    6- Users sign in internally and externally and how they will be directed to use their server for meet and dialin

     1- Reverse Proxy
    publish the webservices for all additional standard Server (Change certificate with additional SAN!)
    2- DNS records
    The registrar on the branch side should point to the Standard server
    3- Edge configuration and communication with the branch sites
    can still be used with the standard server
    4- Persistent Chat communication with the branch sites
    can still be used with the standard server
    5- Monitoring services which is coallocated on the main FE
    the same for the standrad Server, only configuration
    6- Users sign in internally and externally and how they will be directed to use their server for meet and dialin
    therefore you have to publish the webservices through your reverse Proxy and to Change the DNS entries for your local sites.
    regards Holger Technical Specialist UC

Maybe you are looking for