HP Bluetooth Touch to Pair Mouse H4R81AA stopped working frequently

My HP touch to pair mouse H4R81AA started this problem right after warranty is expired. It stopped working after 2-3 minutes and I have to turn off and turn it back on to work with any laptops running Windows 8.1 and Windows 7. I tried with several laptops but same issue occurred. Is there a way to reset the mouse or update the firmware or I just have to toss it away?

I have had the same problem with my H4R81AA and looking for an answer! Quite dissatisfied with this device actually, ever since I bought it

Similar Messages

HP Touch to Pair Mouse

Hello,
I don't know if anyone can help me, but I brought an HP Touch to Pair Mouse (H4R81AA) the other day along with an HP Split x2 (13-f010dx) laptop. I setup everything with the mouse and laptop, and it was working at first, but then it stopped. I get an error saying something about "driver not supported". Is this mouse supported for this laptop/windows 8.1 or do I need to purchase a new mouse?

Hi SouthernGirl98,
I understand your wireless mouse is not staying connected to your computer. It sounds like you need an updated driver. See, HP Split 13-f010dx x2 PC Drivers, specifically the section "Driver - Keyboard, Mouse and Input Devices". Press the download button to the right. Hopefully this solves your issue. Have a great day.
Ryan1216
I work on behalf of HP
The advice and opinions given here are my own and not those of HP

My magic mouse just stopped working

My magic mouse just stopped working. I have rebooted the iMac and changed the batteries. Nothing is fixing it. What do I do next? When I turn the mouse on the green light on the bottom stays on for a few seconds and then flashes twice, pause and repeat.
On a side note. I just brought home a MBP about an hour before the issue. I turned bluetooth off on the MBP but could it be the problem? It was working fine with both machines on for about an hour.

OK somehow after a couple restarts it fixed itself. ANy idea on why it did that?
Thanx for any help

Bluetooth on my iMac has suddenly stopped working! no icon and not in the preferences anymore? tried turning off etc. can anyone help?

Bluetooth on my iMac has suddenly stopped working, no icon top right and unavailable in preferences! Tried turning off etc
Help!! Thanks

Please carefuly read and methodically follow the instructions in Apple's Troubleshooting wireless mouse and keyboard issues located by clicking http://support.apple.com/kb/ts3048

Mouse Clicks stop working randomly

So far I have noticed several times on my Quad Core 27 inch imac that the mouse clicks stop working. This is with two different mice, plugged in together, so I know it's not mouse or driver related. It happens to both of them whenever it does happen.
The only correlation I can make is that it usually happens when I am on a website. I might even have noticed a correlation with "flash based" modules and components on websites, but this could be speculation at this point.
Apple, I love you, but having to hard restart my $2000 computer because the mouse is inoperable is unacceptable. Figure this out. There is no excuse for this. PC's don't do this. I've never had a computer do this in my entire life and words cannot describe how frustrating it is, especially when you are in the middle of trying to get some work done...
-Matt

Try hitting the escape key on the keyboard (ESC). I've noticed that some property sheets, dialogs, and context menus can get 'lost' if you change focus to another program intentionally or accidentally, or if an application 'steals focus' (fairly rare in OS X). You may have to Command + Tab between applications to find where things are 'hung up'. Flash seems especially bad about hanging after a right click tries to call up a context menu.

Can apple replace my ipod touch for free if its stops working

can apple replace my ipod touch for free if its stops working, because i havn't had it even for one year yet.

Home Button wrote:
As long as it's under warranty (The warranty is 1 year unless you have AppleCare) they will replace it for free if the iPod had an issue that was not caused by you.
Apple will replace an iPod that is still under warranty if it has a manufacturing defect. That's not the same thing.

Mouse Clicking Stops Working

Hi everyone,
Suddenly, for no discernible reason, mouse-clicking stops working. The cursor moves around on the screen, but clicking produces no results. This has happened multiple times [in Safari 3.0.4, iCal 3.0, iTunes 7.4.2; Photoshop CS2 (v 9.0.2)]. Restarting is the only solution I've found.
I use a Logitech wireless keyboard and mouse combo. Thinking the Logitech driver might be the culprit, I swapped in the original keyboard and mouse that came with the computer. Same results: at times, clicking the cursor does nothing.
Any ideas?

I experienced this issue as well.
The only patch I am aware of is the following:
- Press the OPTION key, 5 times in a row (this will trigger an option in the Universal Access pane of the System Preferences that allows you to use your keyboard as a mouse). You'll hear a sound warning.
- Press the OPTION key, 5 times in a row AGAIN to revert to the previous status.
Your mouse should now be able to click again.

TS3048 My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.

My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.What can I do?

Hello:
Try resetting the SMC and PRAM.
Barry

Why has my magic mouse suddenly stopped working? I'm using 10.6.8

Why has my magic mouse suddenly stopped working? I'm using 10.6.8

We can't know. You have not told us what exactly the problem is. If there are any warnings, you need to provide them along with other info like the crash logs. If not you have to explain the situation in more detail. Just saying that it doesn't work anymore is not particularly useful.
Mylenium

Internet stops working frequently on OS X Lion

I had 10.6.X latesr version was OS X and I was happy with that. Now I have upgraded to this Lion OS and I am getting one very embarrasing issue.
Internet stops working frequently. The following will give you the feel of the issue:
- I am starting safari and will browse for sometime.
- Suddenly I wont be able to open any sites, internet will stop working.
- So I check wifi, it is online and showing correctly in my Mac Book Pro.
- I checked with my room mate his internet is working properly.
- I changed browser I am not able to browse site in Chrome too.
Solution restart MBP or on/off wifi and restart browser then internet will start working. I am fed up of this lion problem. Does any experienced this problem? Is this a bug? Why I upgraded to this Lion?

I am facing the same issue, only with a slight difference. My entire system sort of hits a halt, apps still work, but they refuse to close.
I am using Internet Sharing to share my internet connection from my iMac's Ethernet port to the WiFi. After a while, not only the iMac's internet stops working, the internet sharing stops working too, not to my surprise. Restarting the computer seems to solve the problem but not 100% of the time, and everytime I try to restart the system, all my open apps seem to refuse to close and I have to either force quit them, which works sometimes, or do a force shutdown by holding the power button for a few seconds.
Making the Ethernet port inactive and reactivating it does not solve the problem, nor does disconnecting the ethernet cable and reconnecting it.
I have a little software installed that monitors my network activity and displays it in the menu bar. I have it currently monitoring my Ethernet port and what happens when the internet connection stops working is that the Ethernet port, although still connected and with a green light, just stops sending and receiving data, sometimes it does receive some data but it stays at 30-60 B/s.
I'm sure this is an issue with OS X Lion because I had never had this issue with Snow Leopard until I upgraded to Lion.
Realy hoping for some guidance from Apple here on how to tackle this issue, it's quite annoying to have to restart my iMac all the time. I am used to leaving my iMac on all the time cause I access it remotely often using LogMeIn on my iPad. As well as that, I have other network services running and it's quite annoying to try and access my iMac remotely and find out it is offline because Lion refuses to keep me connected to the internet.

HP X4000b Bluetooth Mouse (H3T50AA) stops working if not moved for a while, then computer crashes

I will be very happy if someone answers this, 'cos from all the other related posts, my outlook is pretty bleak. At least give me the thumbs up for trying, or a little human contact. Proof this post existed.
Alright, I (fairly) recently updated to windows 8.1on my Samsung quad-core notebook - Model is NP905S3G
For the full info- see the picture.
Anyway, the problem is, that ever since I installed Windows 8.1, if I don't move the mouse for around 1minute when it is on (i.e. I just leave it still for 1 min because I'm typing stuff), it stops working. Moving the mouse simply doesn't do anything. If I look on the 'devices' screen, it is still shown as connected, and I can try re-connecting it, but it doesn't work. Turning on and off doesn't work. Pressing that little blue 'connect' button doesn't seem to do anything normally, and in this case, does nothing. Un-installing and re-installing the mouse does not permanently solve the problem (but does restore connectivity, at least until I leave the mouse idle for too long again)
Currently, once the mouse has stopped moving on the screen, I press the power button (which for me makes my computer sleep). When I do this 1 of 2 things happen; either it goes to sleep as instructed, or it stays on indefinitely, and I have to hold the power button for 5 seconds to do an emergency shut-down. This is a pain, especially since nothing is saved, and the computer takes extra-long to turn on the next time.
The real problem is this: about five minutes after the mouse becomes unresponsive, the computer crashes. It is during this five minute period that I can save all my stuff, but if I have been typing non-stop, I may not even notice that the mouse has stopped moving, and so the computer often crashes at unpredictable times. This of course is a major annoyance, and what’s more, sometimes just when I click a link my mouse freezes, and I have to restart my computer or let it crash.
The crash message is DRIVER_POWER_STATE_FAILURE, and comes on a blue screen with a message saying the computer is collecting some error info, and a silly little smiley face. I have come to hate that smiley face.
If you’ve read this far, thank you very much, PLEASE FIND A SOLUTION, MY MOUSE IS PRETTY UNUSABLE AT THE MOMENT
PS. When I feel it is too risky to use a mouse, I use the touchpad. The setting where tapping=clicking really annoys me, and I also don’t like the inverted scrolling. I change these settings on my preferences, but for some reason they are never saved once I turn my computer on. They used to be saved before updating from Windows 8 to 8.1. Any suggestions?

Not actually solved. The problem still happens and isn't limited to me or my headset.
I just want this question out of my sidebar and this is the only way to do that!

[SOLVED] Mouse buttons stopped working

I have a Logitech Marble Mouse (connected via a USB to PS/2 adapter). It has no scrollwheel, so I set up the small "extra" pair of buttons to toggle "scroll mode" in certain applications (like Firefox & Chrome). When activated, moving the trackball scrolls the page up/down/left/right instead of moving the pointer.
It's been working fine for months, but a week or so ago, the scroll buttons suddenly stopped working. The settings are contained at the very bottom of the file /etc/X11/xorg.conf.d/10-evdev.org, and the only other file in that directory matches "ThinkPad HDAPS acceleromer data", so shouldn't affect the mouse settings.
(The buttons that don't work are "B" and "C", which both activated scroll mode:)
# Logitech Marble Mouse via PS/2
Section "InputClass"
Identifier "Marble Mouse via PS/2"
MatchIsPointer "on"
MatchProduct "ImExPS/2 Generic Explorer Mouse"
Driver "evdev"
Option "Protocol" "ExplorerPS/2"
### On line below:
### Buttons on mouse are A,B,C,D (l-to-r): Left big, left small, right small, right big
### b = A & D simultaneously; - = no button
### Physical button #s: A b D - - - - B C
Option "ButtonMapping" "1 9 3 4 5 6 7 8 2"
Option "EmulateWheel" "true"
Option "EmulateWheelButton" "9"
Option "EmulateWheelTimeout" "300"
Option "XAxisMapping" "6 7"
Option "YAxisMapping" "4 5"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "false"
EndSection
I've tried playing around with the button-mapping, even jumbling 4 5 6 7 to 5 4 7 6 (which, I thought, should invert the movement of the pointer), but none of this has any effect. I've checked /etc/X11/xorg.conf, and I don't seem to have any mouse-related settings there... and I've read the wiki, but I can't see what I'm doing wrong!
Can anyone help? :-)
Last edited by esuhl (2012-08-20 16:52:25)

I don't think, that evdev has something to do with the xf86-input-mouse. But I belive, this is a real issue, because my good old configuration stopped working (buttons aren't customized) today as well. Looks like the reason is hidden somewhere in yesterdays pacman -Syu .
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "CorePointer"
Option "Buttons" "9"
Option "ButtonMapping" "1 9 3 4 5 6 7 8 2"
Option "EmulateWheel" "true"
Option "EmulateWheelButton" "2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Last edited by vlastikcz (2012-08-08 20:12:33)

Optical mouse repeatedly stops working

I have a Logitech optical corded mouse that I have used successfully with my iMac for a long time. In the last month or so, it will periodically stop working -- no cursor appearing on the screen. To get it working again, I have to unplug from the iMac and replug into the same or any other USB port. It is happening more and more frequently. All other USB devices work correctly in every USB port on the iMac without any such problem. I did not install any new software before the problem began, other than regular installations of Apple updates from Software Update. My diagnosis: For reasons unknown, I need to buy a new mouse. Any other suggestions? Thanks much.
Message was edited by: duneclimb

Hi, check the Logitech website for Mouse"" drivers/updates.
Did you Repaired Permissions Before & After Updates?..L
Message was edited by: elmac

Long-touch selection of text suddenly stopped working, to highlight text. Any help?

Last week I was using the long-touch method of selecting text. After selecting what I wanted I could choose to highlight that ext or strike through or all sorts if things.
I can still use the highlight tool but the way I did it was so much nicer.
Also, double clicking text to zoom appropriately to the size of the page stopped working. Now it just zooms in far too much.
Any help?

I'd suggest to start with disabling any firewall blocks.
Then, do a simple reboot on the BlackBerry in this manner:
With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescirbed for most gltiches and operating system errors, and you will lose no data on the device doing this.
Once complete and rebooted, test a SMS messages again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Touch Pad on 6550b Just stopped working...

I have an HP Probook 6550b and the touch pad just all of a sudden stopped working. I've reinstalled the driver but still not working. It shows up in the device manager but not in the Synaptics list of devices. I've even done a system restore thinking maybe an update messed it up but still nothing. Anyone?

have a similar problem with 6550b. i can move the cursor and use the right-click button. however, left-click button and tapping on the touchpad don't work. same thing in BIOS and in windows (after reinstall)
it happened after a restart and at the same time windows crashed to the point no system restore worked. any comments from HP? as usual, my warranty ran out 3 months ago.

HP Bluetooth Touch to Pair Mouse H4R81AA stopped working frequently

Similar Messages

Maybe you are looking for