Hp c309- problems printing from laptop wo pc on

My printer is set up through my pc and my wireless router. I am finding that I cannot print wirelessly unless my pc is on. Does this sound correct? I don't want to have to keep my pc on all the time as we don't use it that often. I'd also like to reinstall the printer through my laptop so that is the origin. Please help.

You have mentioned that the printer is connected to the PC and to a wireless network.
As long as the printer has valid information for the network, you should be able to use the printer wirelessly rather than shared (with the print server).
The easiest way to accomplish this task would be to uninstall the printer from the other computers and to reinstall the printer making sure to select the network option.
Depending on the software version, you may be prompted to enter the IP address of the printer. If you do not know what this is, you can get this by going to setup>network>View Network Settings on the printer and select the appropriate network option.
I recommend setting up the printer only as a network printer rather than network and USB if possible. This would prevent some issues from arising and make the printer installation a little easier as a whole. However, we can leave the printer connected with a USB cable to the "print server" computer as I'm not certain if you need to have the printer physically connected to that computer.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Problems printing from a Macbook Pro on a Kodak ESP7

Hi,
I am having problem printing from my Mac to the Kodak. I have connected the mac to the printer through the settings as it can see it. However, when I come to print it it says the printer is not responding and to check if it is turned on and properly connected. I have tried reloading the printer etc but still cant get it to work. I fired up my old windows laptop and that will print fine wirelessly so it can't be my BT Hub for the internet.
Any suggestions would be appreciated as I dont want to go and have to buy another printer.
Thanks for suggestions.
Matt

Using the OS X built-in network printing protocols
requires a CUPS driver. Check on Brother's site to
see if they now have a CUPS driver for your model,
or you can try the open source hl1250 driver from:
http://www.linuxprinting.org/macosx/hl1250/
Unfortunately, I don't have an Intel Mac, so I don't
know if any of these power PC drivers will work for
you.
Please let us know.
I was told by a friend that the drivers are already built into the OS X 10.4.3, I hooked up the printer directly via USB and indeed it worked just fine. But, as I stated before, I just can't get the **** thing to work when the printer is connected to my PC and I try to print through the network.

Print from laptop wirelessly to hp4630

My HP 4630 officejet has been printing nicely wirelessly from all of my laptops and devices; since my password via: my internet provider has changed, the printer is not connecting wirelessly to print from laptops; I've done the wireless wizard with new password but still no connection; I've troubleshooted, disconnected everything and have spent hours to fix this problem! I'm frustrated and ready to return printer to store. (

Remove your password from your SSID and see if it connects with no password.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Problems printing from Google Chrome browser using my HP Officejet 6500 E709n Series printer

Dear Sir or Madam:
I am using Microsoft Windows XP Home Edition Version 2002 Service Pack 3 desktop computer.
I have a HP Officejet 6500 E709n Series printer.
I am encountering some problems printing from my Google Chrome browser in my Outlook.com account because when I try to change some settings in the print dialog interface the printout comes out incorrectly.
Below are the 2 snapshots of the print dialog interface of Google Chrome browser before printing an email message from my Outlook.com account.
Are there any software updates to correct this problem?
Please reply back soon.
Thanks.
Sincerely,
Etow

Welcome to the forums Etow,
I saw your post about the issue you are having with printing from Google Chrome. Have you tried disabling your pop up blocker to see if that will help? Also see this guide about Printing with Chrome.
If the above does not help, try using Firefox or Internet Explorer to print.
Have a great Friday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8.

Also when I click on the link in my email to activate my account (in the hopes that a solve will be emailed to me) I get this message -
"Something is wrong
We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address."
Same message if I cut and paste the link.

HT4356 I checked everything out and had no problem printing from IPAD/MINI using the HP Photosmart 6520 printer, but the next day, using same application, my HP did not show, but was looking for the AirPrint Printer, what am I doing wrong?

Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network. No problem printing from my devices, but the following day, it is looking for AirPrint printer, why?

Hello lenc48,
Welcome to the HP Forums.
I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
Please click on the first link that will give you instructions on Uninstalling the Printer Software.
Once the software has been removed, please disable any anti virus protection that you may have on the Mac.
The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
If you are still having issues, feel free to write me back or you can contact HP Total care direct. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Problems printing from iPhoto 6: Page setup & Preview

I am having trouble printing from iPhoto v6. For starters, the miniture preview frame in the print screen does not conform to the paper size selection or image orientation. (It is always a big square.) Only part of a 4x6 image image is seen in the frame. This makes predicting the final result impossible. To make matters harder, the print dialog does not remember what paper size was last used and many internal "Advanced" options reset the paper size to "letter". Simple choosing any printer preset resets the paper size. Switching from advanced options to the iPhoto options seems to alter other selected options as wlll.
I have the most current driver for my printer. I have no problem printing from Aperture or Photoshop. I have custom color profiles and am not entirely a novice, but I am wasting much paper and ink and spraying the inside of my printer!
The use of the native iPhoto print routines seems mutually exclusive with using Advanced options. I understood that the first iterations of iPhoto wanted us to depend on the Mac Print routines, and it was always a little touchy but I would have hoped earlier problems would have been sorted out by now. I want to print my own pictures!
Much confusion and no place to find good instructions. For example, should I be using "Full Page" or "Standard Prints" Standard settings in the print interface? There appear to be several places to select print sizes but they do not seem linked together nor is it obvious which one is determinitive. Under color options do I select Color Corrections <none> or <Colorsync> which then forces me to use driver recommended by Canon despite the fact I have a custom profile identified in Color sync utility. It just isn't working for me.
Are others notiing that iPhoto print routines are no longer working for them? I would like to see the internal print routines working intuitively before additional efforts are made to facilitate purchase from outside printing sources!
G5 2G Dual PowerMac 2yr old. Mac OS X (10.4.4) Canon i950 printer

goldn:
Welcome to the Apple Discussions. Just ran a test and I got a perfect card. Here's what I did.
1 - create the card and type Command-P.
2 - select Stylus Photo R200 under Printer
3 - click on the Advanced button
4 - in the bottom drop down menu select Paper Handling
5 - select the radio button "Use documents paper size: 7.00 in x 10.00 in
6 - now select Print Settings in the 3rd drop down menu
7 - select the type of paper you're using and the print quality you want. I used Photo and High Speed. (also used plain paper for my test)
9 - put a piece of 7 x 10 paper in the printer (yes, you'll have to trip the paper beforehand or use card stock designed for this)
10 - click on Print
11 - when the paper exits the printer quickly put it back in the printer
That will do it. Now there is a caveat. Putting it back into the printer before drying tended to get my leading edge nipped. If you use heaver card stock I don't think that will happen but just be aware. If you wait a moment to put the page, turned over, back into the printer to let the ink dry a bit, all you'll have to do is press the middle button which will be blinking red and that will feed the other side thru when you're ready.

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

Hi,
Apple's AirPrint only support specific models while using wired or wireless network connection.
Plugging a printer into a USB port of Apple base is not supported for AirPrint:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
http://support.apple.com/kb/ht4356
There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
http://www.ecamm.com/mac/printopia/

Problems Printing from Epson 2400 in Lightroom 2.3

I'm in the process of switching over from a PC to a Mac. I've gotten lightroom running and transfered all my photos over. But I'm having two big problems printing from my Epson 2400.
*8.5x11 prints are offset. The top of the picture starts about an inch lower than it should, and the bottom typically gets cut off.
*Lightroom refuses to print 4x6 prints. It says it's printing, and the paper feeds in, but then the printer just spits out a blank page.
I'm using the most current version of the Epson 2400 driver that I could find on the Epson web site.
[Update] I used iPhoto 9 to print out some pictures, and they came out fine. So this seems to be a lightroom issue or a conflict between the lightroom/epson drivers.
Any help would be greatly appreciated.
Thanks!

Further update. It appears that I can print perfectly from another account on the same mac. But the account on which my catalog resides doesn't work at all. Could my catalog have been corrupted when I transfered my photos and catalog over to the new mac from the pc? Is there any way that I can fix it? (I have tried optimize and relaunch; no luck.)
I could -- as a last restort -- kill the catalog and reimport all my thousands of photos, but wouldn't I loose the keywords and adjustments?
Any help would be greatly appreciated!

Anyone else have a problem printing from an iMac OS-X 10.9.3 to a wireless Epson Artisan printer? Sometimes it prints but must often I get "The printer is not connected" and I have to retry printing 8, 10 or 12 times before it will print?

Anyone else have a problem printing from an iMac OS-X 10.9.3 to a wireless Epson 835 Artisan printer? Sometimes it prints but must often I get "The printer is not connected" and I have to retry printing 8, 10 or 12 times before it will print? I have followed all the instructions from Epson about upgrading, etc. but it is very frustrating when I have to repeatedly try to print. Epson says talk to Apple???

Try checking thru these, maybe some help.
Mac OS X: How to reset the printing system
http://www.macworld.com/article/2029528/mac-troubleshooting-what-to-do-when-you- cant-print.html
Also try deleting the printer from your printer Q system preferences, then reinstalling it (highlight the printer click the minus symbol, then click the plus symbol and add it again. Reboot, and try.

Would like to print from laptop to printer at home. Printer is ethernet connected to NetGear Router

HP PAvilion dv1000, Windows XP
Would like to print from laptop to printer at home. Printer is ethernet connected to NetGear Router.
I had been able to print wirelessly from laptop to HP 7310 Officejet all-in-one, but now all I get is "document failed to print" message. I can get documents to print on this printer using my smart phone, but not the laptop.
I have used "find printer" button on print screen and can see the printer to select.
Any suggestions?
This question was solved.
View Solution.

Figured it out after looking at a few other posts...
Configured port to printer IP Address and now it is printing perfectly.
Thanks for having posts out there to review.

Problems printing from Adobe 9

Hi, I am having problems printing from Adobe 9. I can open documents OK but when I try to print them it takes me through the normal print screens, then when I press print it says unable to print document followed by page not selected.
I have also try to delete Adobe 9 and reinstall but when I come to reinstall, I have to click on the grey box at the top of my screen to agree to allow the instillation to take place and everything just freezes up and I have to ctr alt del to move on.
Everything was working fine until the last couple of days
Any help would be much appreciated

My problem is the printing will eventually happen but I have to wait for as long as half an hour. What gives? Are there worms in the Acrobat 9 product? How can I resolve this problem?

HP LaserJet Pro 100 Color MFP M175nw - Problems printing from Mac laptop

Hi
I have never managed to get my prnter to prnt wirelessley from my laptop (Mac Book Pro - (OS X Version 10.6.8). It will print when connected via the USB cable however when I try to print wirelessly, the printer dialogue indicates that the printer is offline. Both of our iphones will print wirelessly from the printer.
Please help!

Hi rachelwallace,
Not sure what happened there. Should have gotten a blue wireless light when connected to the printer's network.
You could restore the printer's defaults and try one more time.
Restore the printer's network defaults.
Touch the Setup button. (wrench)
Select Network Setup Menu.
Then select Restore Defaults.
Print out a configuration report to make sure the IP address is 0.0.0.0.
Try the previous steps for setting up the Adhoc to Infrastructure connection.
If you are still having issues and you have a Ethernet cable, connect it from the printer to the router.
Wait about a minute, print the configuration page to see if you get a IP address.
Printing a Configuration Report.
Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
Then disconnect the Ethernet cable.
Then wait a minute to see if you get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page. That way you will know that the printer is now networked.
Since the software is already installed, all you have to do now is add the printer on the Mac.
Click the Apple icon ( ), and then click System Preferences.
Click on Print and Scan.
Click on the + sign.
Highlight the printer in the list.
Click on the add button.
Test the printer.
In case you don't have a Ethernet cable you may try the wireless direct setup.
On the printer, touch the setup button, (wrench) then select network setup menu, select wireless menu, select wireless direct and turn it on.
On the Mac, click on the Airport and select the printer from the list to connect to.
Then open Safari and type in the IP address for the wireless direct (192.168.223.1) for the printer in the address bar. (don't worry about the light on the printer)
This will load the embedded web server for the printer.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption.
Apply settings.
Click on the Airport and connect back to your network name.
Print out a configuration report to make sure the IP address is valid. (192... or 10....)
Then add the printer on the Mac.
Test the printer.
Please let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp officejet 4500 wireless won't print from laptop. It is connected to laptop.It prints from desktop

We have a HP Officejet 4500 wireless printer which was first installed in 2011 without any problems. We also utilize a HP LaserJet P1006 printer (not wireless) with our network. I cannot print from my laptop to either printer, but hubby's desktop has no problem. Both printers stopped working for my laptop at the same time. Everything worked perfectly until a few weeks ago when I could no longer print directly from my Dell Inspiron laptop. When I check on the connectivity of both printers to my laptop, the information tells me the printers are connected to my laptop.
My husband has a Dell desktop (our main computer).
I have tried everything I know to fix this problem, including shutting down the desktop, my laptop, the router, and the printers (including disconnecting the printers from the desktop with the cords that connect to the printers). I have followed all instructions on how to restart the entire system...plug the router in, plug in the printers & turn them on, and lastly restart both computers.
I am not what one would call "computer savvy"; as a matter of fact, I am quite computer-challenged. If any of you can tell me in extremely-easy-to-understand language what to do, I would appreciate your help.

Hi,
Pleae download and run HP Print and Scan Doctor utility which should resolve most of printing issues.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-106151-2&cc=us&dlc=en&lc=en...=
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Using printer from laptop

When I have been trying to print from my laptop the items have been put in to queue. When I open the items it says my printer is offline. I try to get it online but it won't work. need help.

Hi unkiemoe,
I have a link below to the Print DIagnostic Utility. This should resolve the issue with the printer offline issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02072599&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Hp c309- problems printing from laptop wo pc on

Similar Messages

Maybe you are looking for