HP C3180 wireless set up with Mac OS 10.7X

How do I do it?

I hope you are doing well and welcome to the HP forums;
What is the complete model of your printer?
Check in this list if your printer is compatible to be use with a HP print server click here
Let me know if you have any further questions. I will do my best to help you.
Best of luck and hope this answers your question;
RobertoR
remember . . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Similar Messages

Sharing Linksys Wireless Print Server with MAC and PC - How to do?

I have lost the capability to share a printer on my network by using the Linksys Wireless Print Server-model number WPS54G -V2. Prior to having to return my previous Print Server on an RMA, I was able to use the MAC and PCs on my network. I have a PowerGook G4 with MacOS X 10.4.10. I also have a Airport Extreme Base Station V5.6. The printer on the network that is being shared is an Epson Stylus Photo 820. Recently, when trying to reconfigure the network, I updated the software on the Airport Extreme...so I think after that, I am no longer able to share this printer using current network configuration. As information, I will share how I got the network to share the printer BEFORE I had to replace the previous Print Server and BEFORE I updated the Airport Extreme. Please see this link:
http://www.macosxhints.com/article.php?story=20050406151311940
Even though this was for a different type of Print Server, this worked for me.
When reconfiguring the new Print Server, I contacted Linksys...as had some difficulty until I found out how to assign a static IP to the new Print Server. When trying to talk to them about the Mac issue, and sharing the printer, they shared this link with me...which may be helpful to some, but I found that this does not work for me...
http://www.macosxhints.com/article.php?story=20060404021600193
I have been trying to work through the issue, but feel I may now have some compatibility issues between the Airport Extreme and the Epson printer.
Further details are that I use 10.0.1.78 for the assigned IP address for the Print server. My router (which is the Airport address) is 10.0.1.1. I have tried IPP printing option, LPD printing option...and IPP printing at least returns a status on the Print Server as "printing" as opposed to "idle". I have checked the Print status on the Mac, and I have received two (2) different error messages as to why the print job failed. They are:
"the process "picwpstops" stopped unexpectedly with status 1"
and
"the process "rastertoprinter" stopped unexpectedly with status 1"
The latter happens when I follow the instructions on the second link I attached on this topic...with the only change being that I select IPP printing as opposed to LPD printing.
Anyone that has any insight into HOW to configure the mysterious settings for Mac OS printing so that it can be compatible with a Wireless Print Server, please feel free to comment. In the meantime, I am thinking that the links above could help some people...just not me at this point given my current configuration and versions of software/firmware and perhaps the printer I am using.
Greatly appreciate your consideration, and any suggestions to anyone that might understand what these error messages mean when checking the printer status after sending a file for printing.
Thank you

1. No, you don't have to make a bootable clone.
2. If you use the drive for a bootable backup, then you cannot use the drive for other types of storage unless you partition the drive and make more than one volume.
3. No, it will not try to boot the computer. You must designate the startup volume using Startup Disk preferences.
If you wish to use the drive on both a Mac and a PC, then either you make two partitions - one for Mac and the other for the PC or you must format the entire drive using FAT32 so the drive can be used for read//write by both operating systems. If you do this then you cannot use the drive for a bootable backup nor can you use it with Time Machine.
FAT32 is slower for read/write on the Mac than using Mac formatting.
Optimally, I would suggest you partition the drive into two volumes. One volume formatted for the Mac and the other formatted FAT32.
You can send files from a PC to a Mac and vice-versa using File Sharing. Select Mac Help from the Finder's Help menu and search for "file sharing" or "sharing" to find help articles. Also see,
Mac OS X 10.5 Help- Setting up a Mac computer to share files with Windows users
Mac OS X 10.5 Help- Setting up a Windows computer to share files with Mac users
Mac OS X 10.5 Help- Sharing with Windows computers

Wireless printing - problem with MAC integration

Hi everybody.
Just bought a Macbook pro and cannot get it to recognize my printer.
Devices within network:
- Belkin WLAN Router
- HP Laserjet CM1312 multifunctional printer - with HP 2101nw wireless G (printing and even scanning works fine wireless!)
- Acer Notebook with XP Home (used to set up the 2101 wireless)
- Acer Netbook with XP Home (added later to network, no problem with printing, setup took 5 min)
Antivirus software: Avira Premium Security Suite on both XP's
WPA-PSK encryption, no mac filtering.
The Macbook can access internet, but nothing happens when I try to print. I wanted to stop the hassle that Windows is causing occasionally. Frustrating experience with the Mac so far.
Can anybody help?
This question was solved.
View Solution.

I have removed the printer, and added again - a couple of times. I was not sure what protocol to chose (LPD, IPP, Socket).
I took your advice and tried, but with the right click (ctrl pressed), nothing happens. The normal window for the print queue opens, and I cannot select anything like "Reset Printing System".
This does not work either, no Printer with "Bonjour" is offered for selection:
"Select the plus sign to re-add it. Look for the printer with Bonjour next to it, select it and wait until the "Add" button becomes available. Click it."
When I select the plus sign, I can only make settings in the "IP" area. Standard, Fax and Windows have nothing to select or to put in. "IP" offers Protocol to select and Address to fill in. I put in 192.168.2.6 and tried the different protocols. "Print with" offers generic PostScript printer, Generic PCL Laser printer, "other" and printer software - thats where I selected the driver for the cm1312
Can you tell what I did wrong? Thanks for trying

Officejet Pro 8600 wireless print option with Mac OSX Snow Leopard?

Hi My 'old' 8600 printer died and I purchased a new one. I did not set up wireless communication with the old printer but am interested in doing so with this new one, or at least having that option.
I'm running Mac OS X 10.6.8 Snow Leopard. The installation CD that came with the new printer says it's for OS X v10.6, Lion or Mountain Lion. Is it compatible with my system?
Thanks!

Hello KelliMK, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are looking into compatibility information. The Officejet Pro 8600 is compatible with Mac OS X 10.6. The software disc should allow the full install without issue.
As for the wireless setup, I would recommend following this document on HP Officejet Pro 8600 All-in-One Printer Series - Installing the Printer Software on a Wireless or W...
Please let me know if you have any questions. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HELP PLEASE - HP Laserjet wireless set-up on Mac

Please help me - I can not set-up my HP Laserjet M1217 nfw printer on my wireless network (for wireless printing). I am fully aware of, BUT can't access the wireless configuration utility via the Embedded Web Server.
I have checked to make sure the wireless radio is turned on.
I have printed out the Test Page/Configuration that shows my printer's IP address.
I have entered the IP address in my web browser but everytime I get "Failed to open page".
The set-up utility with the software is not help at all, it does not have any info about wireless set-up.
What am I doing wrong?? Please help me. Please.

Even though your wireless radio is turned on, you have to connect to your router with your SSID and password. Once that is done you should be able to use the EWS. Has the printer been successfully installed wirelessly?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Imac intel - which wireless option compatible with mac/pc

I really appreicate some advice about going wireless. I am on telewest broadband (now virgin broadband) I have an imac intel which has an Aiport card inside. See below:
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x14E4, 0x89)
Wireless Card Locale: Worldwide
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.80.79.1)
Wireless compatibility with Mac and PC
My son has a pc laptop (will wireless automatically see both mac and pc in the same house?)
I have been googling without success - because a lot of the jargon is beyond me.
Hope this is okay to post here.
IMac Intel Mac OS X (10.4.9) purchased early 2006

Welcome to Apple Discussions!
You might find that MacCam (http://webcam-osx.sourceforge.net/) can help with a compatible driver for that device - it's by no means sure, but the MacCam project does support a number of Logitech USB webcams.

Wireless print server with Mac G4 and Dell PC's

I have a belkin wireless router and a linksys WPS54G print server. Hardwired by ethernet cables to the router are two computers 1) Dell 2400 and 2) Apple G4.
I am trying to get the Apple to print to the printserver. the linksys software set the Dell up and the print server and they work fine. I have tried everything i can on the Apple but no luck. Seems to be the driver. The printer is printing gibberish from the mac. The printer is an Epson Stylus Photo R320. I dowmloaded the drivers for Mac OS 10.4.4... from the epson website - I chose each one for the printer on my MAC and tried to print. The result was either no print out or differing gibberish each time. What can I do?

Please search this forum. Your precise issue has been covered several times. You have to use a CUPS driver for network printing - Epson's drivers are Carbon, not CUPS. Start by updating the Gimp-Print drivers that Apple included in OS X to the next newer version, now called Gutenprint 5.0.0:
http://sourceforge.net/project/showfiles.php?group_id=1537

WRE54G Set up with Mac OS

cannot setup the Wireless-G Range Expander (WRE54G) to my MAC OS Airport network
Please advise
Thanks

What is the model number of your wireless router?
The wireless range expander WRE54G will work only with wireless G routers.

Pixma MX430 Wireless Connectivity Problems with Mac OSX 10.9.4

My Pixma MX430 suddenly refuses to connect wirelessly to my Mac running OSX v 10.9.4. I was able to fiddle with settings and nudge it to work but it now steadfastly refuses to play ball. I have no CD drive incidentally. I would be grateful for any suggestions as I need to print and scan documents urgently.
Many thanks for your help.
Jenny

USB 3.0 is an international standard. Yes, it's compatible with OS X 10.9.x
Reviews on Amazon from other iMac users have been positive.
Just like with USB 2 hubs, some devices aren't happy sharing.
I can't tell for sure it's the hub's fault. You need to try other combinations of connection.

E2000 wireless problem only with Mac

Two weeks ago I left on a vacation and now my internet doesn't work on my Mac.
This is my network:
2 Windows Laptops
1 iMac
2 iPhones
2 Apple TVs
1 External Network Hard drive
Everything works but my iMac...
the iMac connetcs to the home intranet but not to the internet.
Any ideas? I have already created a new wireless conecction with new name and password. Updated to the lastest, not Lion yet, but I don't think it should matter.
I open to anything... thank you.
Ed

This has happened to me before. Try deleting the old network on AirPort, reboot your Mac, create a new location and see if you can connect.

Wireless printer compatible with mac book pro

what wireless all in one printer is compatible with a mac book pro(snow leopard)

You would use AirPort Utility for this. It's located as follows on your Mac:
Hard Drive > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Wireless tab below the row of icons on the setup page
Click the Options button
The option to create a "closed" or "hidden" network should appear. If the box is checked, uncheck it to perhaps help your printer find the wireless network
If you can connect to your wireless with your computer, you know the wireless is working correctly. You should probably contact HP for additional assistance as this appears to be an printer issue, not an AirPort Extreme issue.

Would the mac box set work with Mac os 10.4.11

I have a macbook that has mac os x 10.4.11 I am thinking about getting the mac box set to update its software. but I was wondering if it would work on my computer?

thanks for the help, this was the information that i found on my computer.
Model Name:          MacBook
Model Identifier:          MacBook1,1
Processor Name:          Intel Core Duo
Processor Speed:          2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per processor):          2 MB
Memory:          512 MB
I think that It will work, i just wanted to be sure before I bought it and it did not work.

Office jet 5745 set up with mac

Recently bought a hp office jet 5745 and own an imac with a osx 10.6. Will this work with the printer?

Hi,
I afraid the printer is incompatible with your operating system.
You will either need to update your operating system to OS X 10.7 or newer version (10.10 is available as a free upgrade from Apple if your operating system meets its requirements).
Otherwise you will need a different model (more likely an oder model) which is compatible with Snow Leopard 10.6.
You may find the System Requirements listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04353671&cc=us&dlc=en&lc=en&product=6879018&tas...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Being new to working with Mac, I was wondering if anyone can tell me how to set my Mac Book Pro wirelessly to the Canon Pixma Pro9000 Mark ll? My husband had gotten this printer and the sales person said that it can be set up wirelessly to my Mac Book Pro

Being new to working with a Mac, I was wondering if anyone can tell me step, by step on how to set up my Mac Book Pro(Mid 2012) wirelessly to a Canon Pixma Pro9000 Mark ll that my husband had gotten me? Sales person told him that it's compatiable to my Mac Book Pro, Mtn Lion, but I do not see it and I don't see how to do it wirelessly. Any help would be appreciated. Thanks ;o)

Hello:
There is nothing wrong with asking questions. There are no dumb questions....answers, yes, but not questions.
If you set up your wi-fi router to establish a network, then both your printer and MacBook Pro will connect wirelessly. *** I do not know what kind of router you possess, I don't want to suggest things that might not be relevant.
Barry
P.S. No need to apologize! Most of the people here (none of us are Apple employees) enjoy trying to help others.

I just bought a new Mac mini but cannot complete the set up and I could not pair my apple wireless keyboard with mac min. Can someone help?

I just bought a new Mac mini but cannot complete the set up, as I could not pair my apple wireless keyboard with mac min. Can someone help?

Bluetooth: How to set up your Apple Wireless Keyboard

HP C3180 wireless set up with Mac OS 10.7X

Similar Messages

Maybe you are looking for