HP C4440 ALL -IN- ONE PRINTING AND INK ISSUES

I have an HP C4440 ALL-IN-ONE that seems to be having some printing and ink issues.
Ink keeps saying it is in backup mode
and its also saying it is not detected or intalled
this is not a new cartridge and has been used before without any problems.
i tried using all of the solutions hp gives you with no help.
all ink levels are detected and i am also using color ink cartridge.
thanks for any help.

Hi! I have same problem too. After printer (HP B110b) turn on and then off, all my Wi-Fi devices lose network. I should reboot my router every time after use printer =(((This problem only with Wi-Fi. All ethernet-connected devices woks OK.
My network: D-Link DIR-320 with firmware 1.21
Wi-Fi: hidden network with WPA/WPA2 and PSK mode.
Wi-Fi devices: netbook with WinXP SP3, netbook with Win7 Home Premium x32, Sony-PRS-T2 reader and Galaxy S3 phone (last 2 based on android).

Similar Messages

HP B201a All in One Printer and iPad Issue

Okay. I bought a HP 210a air print printer. It was working great with my Linksys router and my iPad and iPhone worked with it perfectly. Since that time I have recently bought a new new 2TB Time Capsule and just recently set it up. The old router is no longer hooked up. Since switching over to the new router, nothing prints from the iPhone or iPad. So here are the details and I am hoping I am just missing a step:
1. I think it is important to point this part out. After setting up the new router, and before discovering any of this, I turned on the HP printer. Upon doing so, the printer informed me a software update was available from HP so I downloaded it and it appeared everything was fine.
2. After the update, I tried printing and nothing. Duh, the printer was still looking for the old router. I ran the built in HP wireless setup wizard on the printer and it pointed to the new router fine. I tested the connection using the test feature on the printer, and it printed a report that all was fine and that it was now pointed at the Time Capsule, great signal, etc...
3. I went to my iPhone and iPad, made sure they were pointed at the same network as the printer, and once again the printer appeared on each device as an AirPrint printer. Great I thought, so printed a test a page from each device. Both pages printed. Now here is where it gets weird.
4. I tried to print a second document from the iPad and iPhone, nothing. I tried a picture. Nothing. It still shows eveything setup correctly, the HP shows as the AirPrint printer and connected, but no matter what I do, it nothing is printing from either device. I've tried resetting my network settings on the iPhone and iPad and pointing to the network again, re-running the HP setup Wizard on the printer. They all show that everything is fine. The iPhone and iPad connect to the network fine, both show the printer when I go to print. However, after I hit the "print" button on either device, it shows like the document is being sent but NOTHING happens on the HP. It is very frustrating.
The WiFi is working fine, I can surf, email, etc... so the router is working properly. So what am I missing? Could the HP update somehow have caused the problem? I have to believe that between the update and the new router that somewhere I am missing a step. Any help is greatly appreciated.

You might also want to post your query on the HP forums at http://h30434.www3.hp.com/

I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad

I have a HP Photosmart C7280 All-in-One Printer and want to print from my ipad's and my iphones at home... My printer is set up to print wirlessly on my Network. I need to know is there a firm wear update i can get or a good app to install so i can print??

hi there,
This article should have everything you need to get started . Check it out and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I have a C4240 All-In-One printer and i am getting an error message Carriage Jam. i hardly use the

I have a C4240 All-in-One printer and am getting an error message on the display panel "carriage Jam". I have not given this printer any kind of abuse. I do leave it turned on but hardly ever print to it. I have replace the cartridges probably twice since i have owned it. Can you help me out as to what I should do with the printer

Can't really help with your Internet issues, but I can put you on the path to leaning more about Macs.
If you're a former Windows user, there many resources on Apple's web site to get yourself familiar with how Macs and OS X work.
Here ard a few areas to spend time with
http://www.apple.com/support/macbasics/
http://www.apple.com/support/imac/intel/
http://support.apple.com/videos/
http://www.apple.com/support/lion/
http://www.apple.com/support/osx/
For the video tutorials, in the video search box, just type in OS X. You'll get a list of OS X video tutorials to watch as you learn to use your iMac.
Start with the Anatomy of a Mac video first, Then the Finder Basics video second. After you have watched and put to use these two videos, you can watch any other OS X video you want in any order.
Here is a free eBook download of David Pogue's OS X Snow Leopard The Missing Manual here. While OS X 10.7 LIon and OS X 10.8 Mountain Lion work a bit differently than OS X 10.6 Snow Leopard, there are many things that still apply.
http://it-ebooks.info/book/337/
Good Luck!

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused.

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused. I can manually send and receive faxes but I can not do it through the computer.

Try deleting the printer, deleting the job queue and reinstalling the printer again.

HP 3210 All-in-One Printer and Vista

Having trouble with HP 3210 All-in-One Printer/Scanner. Purchased printer late 2006. Upgraded to Vista in February 2008. All functions of the Printer/Scanner have been working just fine with Vista until this month. Error message says 'Unable to Scan or Copy'. Scanned from computer on 12/01/2008 and a week later the error message appeared. Print function from the computer works fine. Buttons on front of the printer for both scan and copy will not work and scanning from the computer will not work. Have tried suggestions from different websites to work-around using a program like Microsoft's Paint but still nothing. Any suggestions will be welcomed.

Resizing and cropping are not the same process.
Image>resize>image size brings up a dialog where you can resize, and if the image is resampled, distortion may ensue.
The crop tool is said, by some, to resample as well, although in many instances minor distortion is not noticed by the uninitiated..
The preferred way (for me) to crop is Image>crop.
If you have a 4x6" picture of a tree, landscape mode, and wish to display the tree in portrait mode, the sure way to avoid the issue is to select the tree with one of the selection tools, then copy/paste it on a canvas which is sized 4x6" portrait mode.
Interesting reading: http://kb2.adobe.com/cps/331/331327.html
I am sure that others will be along, as this topic is not all black and white.

Deskjet HP F4172 All-in-one printer and window 10 compatibility

Dear Madam/Sir,
Respectfully I have HP Deskjet F4172 All-in-One Printer, I would like to ask you this question whether my mentioned HP printer will be compatible with window 10 by "29 July, 2015" when window 10 wil be to upgrade, please? and how I am able to get software and drivers, please?

Respectfully, as I before told you, I have HP Deskjet F4172 All-in-One Printer; I downloaded the window 10 upgrade in my PC and when I go to the HP web Site , in the following link, there is not any sotware and drivers for my mentioned above HP printer, please what must I do? there is only some utilitirs that are useless, isn't the above printer compatible with the window 10?I would like to thank you for the attention.http://support.hp.com/us-en/drivers/selfservice/HP-Deskjet-F4100-All-in-One-Printer-series/3177560/model/3341350#Z7_3054ICK0KGTE30AQO5O3KA30R1

I have a hp photosmart c4795 all in one printer and i need the driver and software for vista os.

install is for a gateway laptop NV5214U. I did asearch on hp website but it responded the it could not find any drivers for the hp photosmart C4795 series all-in one printer.HELP

Ok from here: http://support.hp.com/us-en/product/HP-Photosmart-C4700-All-in-One-Printer-series/3794613/model/3940...
First, select your operating system Microsoft Windows Vista (64-bit).
Click Submit.
Click the blue Download button.
Click Next, then follow the prompts for the HP Download and Install Assistant.
Let me know if you need any more help or if this solves your problem!
Thanks,
-hjs_19 *I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos Thumbs Up" on the bottom right of this post to say "Thanks" for helping!

HT2693 Kodak All-in-One printer and Airprint?

Can a Kodak All-in-One printer run with Airprint? Is there a device that adds Airprint and Airplay to devices that do not have that feature?

Kodak does not appear in the list of Compatible Air Print Manufactuers in the following link:
AirPrint Basics.
http://support.apple.com/kb/ht4356
With that said, there are several alternatives both software and hardware based to give non Airprint compatible printers the ability to be used by iPads, iPhones and other iDevices.
If you are running a Mac Pc you can look into Printopia
http://www.ecamm.com/mac/printopia/
If you are more interested in a hardware solution look into Air Print servers such as:
http://www.lantronix.com/it-management/xprintserver/xprintserver.html

I have a hp7250 all in one printer and it just stopped printing hp printer says radio not working

i have a hp 7250 all in one printer it just stopped printing my compute says its offline but when i go to pinter and try set up it says cannoct connect then review says raido not working

If that reset did not resolve the issue, and the printout indicates that the wireless radio is not working then there are a few options that we can go through.
First, make sure that through the Setup Menu that the wireless has been enabled and turned on. If these options are not available, you may have to try a differnet reset that I will PM to you.
Also, if the wireless radio is not functional then you might consider connecting the printer directly to the router using an Ethernet cord and reinstalling the printer on your computer using that method of communication.
Let me know! Happy holiday!

Hp1300 all in one printer - no ink coming onto paper when I print!

I have been using our HP1300 All in One Inkjet printer for many years. Now when I 'print' no ink comes out onto the page! The printer behaves completely normally and 'prints' the correct number of pages etc. but no ink comes out! I have changed the cartridges but to no avail. Could anyone suggest what the problem might be please?
Thanks

To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet 4630 e-All-in-One Printer Black Ink not Working

My HP Officejet 4630 e-All-in-One does not print black ink but the color ink is working perfectly fine even though the ink status shows that there is black ink left. After I've changed a new black ink cartridge, it will start to work again but after one day it stop printing black ink again. I've only printed a page the previous day and the ink status shows that there's black ink left in it (close to full). I've tried the methods stated here (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03882718&cc=sg&dlc=en&lc=en&product=5305051) but the black ink still doesn't work. So how can I solve this problem??

Hello @3oshua,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Officejet 4630, you are unable to print in black ink, even after replacing the cartridges.
I see you have exhausted the steps listed here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, with no success.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. I highly recommend you call our technical support at 800-474-6836, to see what options they have available for you. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

I have a canon pixma mx360 all in one printer and it won't print

my printer won't print I just replaced the ink. I tried to trouble shoot the printer, and it said that I had a printer error in the que.
I cleared the que and it still won't print. can you please help me figure this out? my printer is a pixma canon mx360 all in one
ink jet.

Hi wendasa,
If you have any antivirus or firewall programs on your computer, please temporarily disable them and then try to scan again. Sometimes these programs can block the scanning process of the printer. If you are still unable to scan, we can try scanning using the Microsoft Paint program to see if the scanner function of the printer is working. To attempt to scan using Microsoft Paint, please follow these steps:
1. Launch Windows Paint by pressing the Windows Key+ R, then typing mspaint, then clicking OK.
2. Once inside of Paint, in the upper left corner you will see a blue square; please click on that and select FROM SCANNER OR CAMERA. A window will appear asking you what device you want to use. Please select the PIXMA MX360, then press the OK button.
3. In the next window, you should have the option of selecting a document type; please select one, then press the SCAN button in the window.
Are you able to scan using Microsoft Paint?
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HP psc 1210 all-in-one printer and Mac OS 10.9 (Mavericks)

I just installed the new OS X (Mavericks) on my mac yesterday, and now my printer, an old but reliable HP psc 1210 all-in-one, will not install. I was previously running OS 10.6 (Snow Leopord) and had no problems with the printer. Is there anything I can do to install my printer on the new OS? My computer doesn't even recognize that there is a printer connected via USB when I try to install it... is there anything I can do?

Hello,
Here is a link to a support document on hp.com on how to install on OS X Mavericks.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
Let me know if this was usefull by clicking on the Kudos button.
I work for HP.
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

I just purchased the envy 7640 all in one printer and need to enlarge the print

I just purchased the all in one envy 7640 printer and want to print from my lap top but the printing that comes out is very very small and i need to enlarge it, I am not a real computer whiz so I just need step by step instructions on how to enlarge the copy being printed. Thank You in advance for your help.

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are trying to enlarge the size of a document you are trying to print. While the specific directions will change depending on your operating system, the program you are using, and the type of document you want to print, I can certainly make sure you get pointed in the right direction. Assuming you are trying to print a text document (and please let me know if you are not) then first you will want to highlight the text you are trying to change the text of. Once highlighted you are looking for an option found at the top of most windows. The option usually has a font name to its left such as Times New Roman. When you select a larger font size it will change the highlighted text so that it matches the size you selected. I've included an image of the option below. If you are trying to print something that is not a text document then please let me know what program you are trying to print from as well as what operating system you are using. If you are not sure what your operating system is you can click here to find it. If you have any other questions please let me know. Also, if this resolves your issues then please let other forum users know by clicking on Accept as Solution below my post. I hope this helps and I hope you have a great evening!

HP C4440 ALL -IN- ONE PRINTING AND INK ISSUES

Similar Messages

Maybe you are looking for