HP C480 - Getting setup on network

I've got a Photosmart C4580 that I've had for a while now, setup on my wireless network, with no issues.  I've moved to a new house, and I have a new wifi network setup.  I'm trying to get my 4580 setup with the approrpriate wifi settings.  I've tried "Restore Network Defaults" on the printer itself, and then started looking online for the right HP setup software to go through the process of setting the wifi settings on the device.  I might just have the wrong version of the software - I've tried both HP Setup and HP Installer.  The device is connected to my MBP via USB.  Pertinent version information:
- MBP running OSX 10.9 Mavericks.  All softwared updated as of this morning.
- HP Setup Assistant V2.1.3.  Surely this is an old version but it's the newest one I could find on the internets.  When I run this, with my c4580 connected via USB, the software finds the printer and goes through the setup process.  When prompted to configure the device for wifi, I check the box and click next.  The setup assistant promptly crashes:
Process: HP Setup Assistant [525]
Path: /Applications/Hewlett-Packard/*/HP Setup Assistant.app/Contents/MacOS/HP Setup Assistant
Identifier: com.hp.SetupAssistant
Version: 2.1.3 (2.1.3)
Code Type: X86 (Native)
Parent Process: launchd [177]
Responsible: HP Setup Assistant [525]
User ID: 501
Date/Time: 2013-11-11 23:30:39.528 -0600
OS Version: Mac OS X 10.9 (13A603)
Report Version: 11
Anonymous UUID: 904547E5-F66F-0E6A-C119-98ABB76169A6
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
HP Installer V Version 3.3.1 (1): When I get to the "Select devices to install" screen, it does not find my printer, and I cannot continue.
Any help would be appreciated.

Not helpful for you at the moment, but I'm having the exact same problem!!
Hope we can figure something out soon!

Similar Messages

  • E2000 Setup Guest Network

    I've had E2000 set up with Main Network and Guest Network for 2 yrs.  My son got a new pc and wasn't getting internet connection and was told to push reset on router.  When he did that internet connection was lost on all devices.   I manually was able to get my pc setup and then the other devices.  The only thing I don't have is the guest network for his pc which I had before. 
    Is the Cisco Connect software cd the only way to setup guest network?  If I originally set it up with a cd, it's been misplaced.  I don't see it listed among my software programs.  Is there a download for Cisco Connect?  If I download and install Cisco Connect is there anyway to keep it from wiping out all my settings on my other devices?  Can I just setup the guest network?
    While guests are using the guest network is their personal data secure like the main network?

    The Guest access feature can only be managed using the Cisco Connect software. I believe the Linksys E2000 doesn’t have any guest settings built-in on its web-based utility which means you have to use their Cisco Connect software to activate the guest feature of the router.  Cisco Connect wouldn’t wipe out the settings on the computer but it requires resetting the router to factory settings before it can be successfully reinstalled. In terms of security, the guest network is secured but it’s tricky (this put me insane before seeing it as an open network) because it still shows up as an unsecured network since its security is through the browser itself upon going to the internet. Overall, the guest network is a separate secured network that provides internet access for your guests. Try using the links below to resolve your issue.
    To download Cisco Connect:
    http://support.linksys.com/en-us/support/routers/E2000
    Installing the Router using Cisco Connect
    http://kb.linksys.com/Linksys/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=21463&userrole=Links...
    Setting-Up Guest Access on Cisco Connect
    http://kb.linksys.com/Linksys/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=21461&userrole=Links...
    All about Cisco Connect Software
    http://kb.linksys.com/Linksys/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=21480&userrole=Links...

  • New PC laptop - can get on Airport Network but can't access internet

    Just got a new HP laptop for real estate reasons (MLS is only available through a PC).
    All of my other computers are Macs and my wireless network is on a Airport Basestation.
    I can access the network with the PC but can't get on the internet even though I'm on the network.
    Anyone have any ideas?

    Ok, you have a completely different situation than that of the Originator of this post. In your case, you're using your Mac as a software base station and not a wireless router.
    The following would be the setup steps...
    To setup for Internet Sharing (Wired to Wireless):
    Enable Software Firewall
    System Preferences > Sharing > Firewall
    - Click Stop to start the software firewall
    Setup the Network
    Cable Modem > (Ethernet cable) > [Ethernet port] Mac > (wireless) > PC
    Setup Port Order
    System Preferences > Network > Show > Network Port Configurations
    - Verify that "AirPort" and "Built-In Ethernet" are enabled.
    - Verify that "Built-In Ethernet" is at the top of the list, followed by "AirPort".
    - Click "Apply Now."
    Configure the Internet Connection
    System Preferences > Network > Show > Built-In Ethernet > TCP/IP
    - Configure IPv4: Using DHCP
    - Configure IPv6: Automatically or Off
    Enable Internet Sharing
    System Preferences > Sharing > Internet
    - Share your connection from: Built-in Ethernet
    - To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
    - AirPort Options
    -- Network Name: <anything you want>
    -- Channel: Automatic
    -- Enable encryption (using WEP) (optional)
    -- Password: (optional)
    -- Confirm Password: (optional)
    -- WEP Key Length: (optional)
    -- Click OK
    - Click Start

  • I keep trying to update but  Keep getting message that network connection timed out. What shall I do, I do not know how to disconect my firewall

    Trying to update ipad2 software. Keep getting message that network connection timed out. Don't know how to cancel the firewall

    Im getting the same thing...

  • I am getting a Mobile Network Not Available message when trying to make phone calls

    I am getting a Mobile Network Not Available message after phone was drained for a few days. Texting works, internet works, I just cannot make calls.

    Statosphere II
    I've reset most everything, taken out battery/replaced, also set up roaming (all)
    Can't check voicemail either
    Thank you!

  • I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

    I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

    it is a windows 8

  • Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7?

    Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7 64bit? It must be the Windows 7 driver of Scanto.msi. Thank you for your support.
    This question was solved.
    View Solution.

    Hi,
    Unfortunately any HP Software component (HP Toolbox, HP Scan, etc.) for this product support 32-bit envoirnment only.
    As you may find by the User Guide, only  basic Print and Scan drivers provided for 64-bit (Page 14):
    http://h10032.www1.hp.com/ctg/Manual/c01072750.pdf
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How to setup a network printer via http

    I have a router with a USB printer attached to it. It looks like this:
    Printer status: Ready
    Printer location: http://192.168.2.1:1631/printers/My_Printer
    In Windows you setup a network printer and the printers address is the http address above. How do you add this type of printer in the printer setup utility on Mac OSX 10.4.11 and 10.5.x?

    For OS X 10.5, you use the following settings
    As mentioned by bdaqua, open Print & Fax and click the IP icon and then select IPP from the top drop menu. Then in the Address field just enter the IP address; don't enter the leading 'http://' and don't enter the :631 (the mere fact that you have selected the IPP protocol means that it will communicate on port 631)
    Then in the queue field you can enter printers/My_Printer, although some router perform a translation for the shared printer so you only need to enter the shared printer name in the queue field.
    As for the name and location fields, these are just free text for the local user and have no bearing on the queue details.
    And as for 10.4 I have no idea or way to test this at home. But if you use a mix of mine and bdaqua's information you should be okay.

  • I'd like to know how to get the SIM Network Unlock PIN for my DROID2 GLOBAL

    I am living in Haiti and I made someone buy a Droid2 Global for me in USA. I have had the phone for 2 months but I never could operate it.  Any time I open it, it requires that I enter a SIM Network Unlock PIN that I have not.
    I' d appreciate you help me get the SIM Network Unlock PIN for my Droid2 Global which IMEI is the following: {edited for privacy}.
    Many thanks in advance

    LatachaM_VZW wrote:
    If the incorrect PIN code is entered too many times, a PIN Unlock Key must be obtained from Verizon Wireless at 908-559-4899 if you are outside of the United States and 800-922-0204 or *611(send) from your mobile number inside the United States..
    The SIM PIN option is only available when the handset is in GSM / UMTS mode. Refer to Network Mode Setting for further assistance.
    Thank you, LatachaM_VZW
    Are you talking about the PUK code (when the PIN for the SIM has been wrong too many times)?  The OP is talking about network unlock, and is using a foreign SIM.   Global Services certainly wouldn't have the unlock code for a SIM that isn't theirs.
    I have heard that if you do enter the incorrect network unlock code too many times, the phone becomes permanently locked (i..e cannot be unlocked even with a valid unlock code) but not everyone agrees that this is true for all phones.
    Jax's post above really says it all, you will need to search the web for a service that will unlock this Motorola phone.  In doing so, you might find a number of threads that say the Global has to be activated in the US before an unlock code will work.  Others were able to unlock without this. 

  • I keep getting a "new network interface has been detected. Hoping to stop getting this automatic message I configured it, or thought I did. I'm still getting the message. How do I stop it?

    I keep getting a "new network interface has been detected. Hoping to stop getting this automatic message I configured it, or thought I did. I'm still getting the message. How do I stop it?

    I thought the same too, looks like its not just me having this issue, hope Apple do something soon. Thanks for your help

  • How do I change SSID setting? Getting message "using network with default ssid'

    Getting message "using network with default ssid'

    First, let's address the biggest issue, the version of Firefox you are using is extremely old, out of date and insecure. Please update to Firefox 33 ASAP ([[Update Firefox to the latest version]])
    After that, please give a bit more context on what exactly is going on. Keep in mind this is a Firefox support forum, we can't help you with Windows settings or setting up wireless networks.

  • How do you setup the network connection on an ipod 4th gen?

    does anyone know how to setup the network connection on an ipod 4th gen. please and thank you.

    Go to Settings>wifi and turn wifi on,. Then tap the network you want to join. Enter ther passward for that network if it is required.
    Also see:
    iOS: Recommended settings for Wi-Fi routers and access points

  • When trying to use my banking apps I get the error "Network Required  This application requires an active Internet Connection.  Please try again"

    When trying to use my banking apps I get the error "Network Required  This application requires an active Internet Connection.  Please try again".  This happens with two different apps from two different banks.  One of them works occasionally and have not figured out why.  I have cell signal and I am on a strong WiFi network.  Same thing happens when I turn off the WiFi too.    I have tried uninstalling and re-installing the app with no improvement.   I can't seem to find any setting that would cause this.   Does anyone have any suggestions?  

    I can access the internet just fine in the browser and i can use any other app i have.
    Sent from my Verizon Wireless 4G LTE DROID

  • How to setup private network in oracle rac

    Hi all,
    Iam trying to setup oracle 2-NODE RAC ,
    now i stuck in setup private network..
    how to setup private network, what i have to do for that.
    please help us provide step by step process

    The loop is nothing but a network cable connecting two nodes on same port with a private IP address (something like 10.0.01 and 10.0.0.2) which is not accessible by any other machine in the network (except 2 nodes obviously ).
    Note that cross over cables are not supported for the Cluster Interconnect. And cross over cables limit the cluster to only 2 nodes, which may not be enough for many RAC deployments.
    Cheers,
    Brian

  • How can I get rid of network wifi I don't want

    anybody know how I can get rid of networks on my wifi that I do not want anymore

    Apple Menu> SysTem Preferences > Network > Airport > Advanced > Airport
    a list of your previous connections, minus out the ones you don't want and drag the one you prefer to connect to first to the top.

Maybe you are looking for