HP C7280 Solution Center won't work after upgrading to Windows 7

I was running Vista and connected to the C7280 both wired and wireless. Last month or so has been wireless with no issues.
I upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says "An unsupported operation was attempted" that pops up twice, then I get an error that says "An invalid argument was encountered".
Then a pop up window gives some steps to try to fix the problem.
I downloaded and installed driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which didn't work.
I then removed the printer from hardware, and uninstalled the Solution Center software,
Re-installed driver PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 driver package and
installed dot4patch_reboot.exe,
shut the printer down, unplugged it for a few minutes, rebooted the computer, and
the same errors occur.
The driver is a year old, and I can't find a newer version.
Released:
2009-10-20
Version:
13.1.0
The patch is a few months newer but it didnt help either.
» HP Print Software Patch When Upgrading Vista to Windows 7
2009-12-06 , Version:1.0, 1.22M
This Windows 7 patch fixes some printer functionality after upgrading Vista to Windows 7. For networked printers, please go to www.hp.com for more support information.
Any help is appreciated.
This question was solved.
View Solution.

Finally got this problem fixed. No Thanks to HP Support
I installed the software for an HP Photosmart Premium C410 series and it corrected whatever problems I had with the HP Solution Center scanning problems in the C7280 printer software.
Go Figure ......

Similar Messages

HP Solution Center doesn't work after upgrade from Vista to Win7 64b

Two problems. 1) Upgraded Dell 1737 Notebook from Vista Home Premium to Windows 7 64b. HP Solution Center no longer works. Have HP Officejet Pro 8500 A909a printer hardwired into router. Downloaded new printer drivers, still cannot print. 2) Cannot get Solution Center to execute. Message says can't find "SolutionCenter.msi". No Win7 upgrade for Solution Center on HP site.

Hello ReallyFreeBob,
Lets first try Uninstalling the existing printer software using the listed steps..
Press the keys Win + R, a RUN box would open. Type in the command %TEMP% in the box and hit OK button.
A temp folder would open, locate for the folder name begning with 7z..... , open it , then do the following ..
Locate for folder "UTILS" and double click to open it. Locate for folder "CCC" and double click to open it. Locate for file Uninstall_L3.bat and double click to Run it. Follow the onscreen instructions
After the uninstallation is done you may have to restart the PC.
Then download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

ICloud email won't work after upgrade

iCloud email won't work after upgrade to Mountain Lion. Says pop 3 server is timing out. Solutions?

I'm sorry, as I keep saying... in MAIL I get the message that it cannot cannot to server!? Did you read the initial problem at all! I know exactly where mail is, although, the diagram was wonderful.
My problem is TWO FOLD.
The MAIL app doesn't work with iCloud but does work with my POP3 email for my office.
Second problem is the iCloud on Safari doesn't work as I get the error message as the screenshot above.
There is NO reason why the @me.com email shouldn't work through the iCloud site, as you can see, there is a also a Mail icon.

Microphone no longer works after upgrade to windows 8.1

After upgrade to windows 8.1 my internal microphone no longer works.
I tried installing updates suggested in other posts with similar driver problems but they did not work.
HPSupportSolutionsFramework-en-11.51.0048 did not work.
My internal microphone is IDT High Definition Audio Codec
When I go through the control panel and look at it - it shows a status of "not plugged in"
Please help
thanks

OK I am a little confused.
There has been no response on this subject in over a week. Not since I responded to your questions regarding product name and number.
However I just received the following email from you:
Hello gordml,
The questions you posted on the HP Support Forum recently received one or more answers.
Question: Microphone no longer works after upgrade to windows 8.1
Date: Sun Dec 21 01:01:56 PST 2014
View the answer(s).
Did this reply resolve your post or question?
If yes, then share the good news! Let others know this reply was helpful by accepting this solution.
You can also show your appreciation by giving kudos.
We appreciate your feedback. It's what keeps our community such a helpful, vibrant place for our members.
Thanks for being a member!
The HP Support Forum Team"
Why would this be sent to me if there has been no recent replies on this issue?

Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
Help please

Hi asalamk,
The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

HT204350 scanner won't work after upgrade

scanner won't work after upgrade

Hey srohall,
Thanks for the question. I understand that you are experiencing issues with your scanner after updating to OS X Mavericks. To troubleshoot this issue, we’ll want to follow the same troubleshooting steps for printers:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
5. Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
1. Reset the printing system, then add the printer again.
2. If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
3. Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.

Mail won't work after upgrade to 3.0

I cannot get my Mail program to work after upgrading to 3.0. It starts, searched for new mail, then quits. I cannot get or send new mail. The program does not operate. Suggestions, please?

I get the exact same thing. The status just keeps showing "Connecting..." and it never seems to connect. Oddly enough, I just updated to the new OS on my iMac at home and immediately after, I couldn't connect to mail from the computer. I had to manually download a component of the update and once I did that, mail worked just fine. Probably just an odd coincidence having nothing to do with the mail issues on the iPhone but I thought I'd mention it.

Itunes won't work after upgrading to Mac os x 10.7

How can i fix itunes, it won't open after upgrading to Mac OX lion??

Downloaded and reinstalled. Still crashed instantly after trying to open or create a document. Below, from Crash Report:
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000044
Crashed Thread: 7
Thread 7 crashed with X86 Thread State (32-bit):
eax: 0xb0427d48 ebx: 0xb0427c38 ecx: 0xb0427b38 edx: 0xb0427b3c
edi: 0x00000009 esi: 0x00000000 ebp: 0xb0427b18 esp: 0xb0427ae0
ss: 0x0000001f efl: 0x00010283 eip: 0x94bc9f4b cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x00000044
Will attempt your suggestion.

Scanner of HP 8500 A909g does not work after upgrading from Windows 7 to Windows 10

After upgrading from Windows 7 to Windows 10 and subsequent upgrade of printer software, the scanner functionality did not work. When I tried to uninstall the printer software I got the message "HP uninstaller has stopped working". After another upgrade of printer software the scanner was still not working. How can I get around this problem? Update:
I followed the instructions for a similar problem with Windows 8 on http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Scan-doesn-t-work-on-Solution-Center-after-migrating-to-Win/td-p/2228367.After this, the scanning seems to work. Not sure whether it is possible to uninstall, though (don't want to try since it is working).

I had the same problem with my Officejet Pro 8600 All-in-One scanner, sfter upgrading from Windows 8.1 to Windows 10. After uninstalling and then reinstalling the printer driver, the problem is solved. You can look up the model of your printer on HP's support site and download it from there. Apparently, not all printers are compatible with Windows 10. In that case, they recommend you buy a new printer. ;-)

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Hi,catalyst control centre has stopped working after upgrading to windows 8 .

Hi,
i have a hp envy-6 notebook pc(Product number: B4P24PA#ACJ,Serial number: [Personal Information Removed] , which comes with windows 7 home basic! after upgrading to Windows 8 Pro 64-bit operating system ,my catalyst control centre ,host application has stopped workiing .
i have tried almost everything i could do but the problem still persists
on every time restarting pc it displays the above error message.
regards
abhishek rao

Hi,
Have you checked in the Device Manager to see if all drivers are installed since upgrading? (look for yellow exclamation points)
Uninstall the AMD driver and catalyst control center. Install the version located in the download section of the web support portal for your sleekbook.It will install both driver (intel and AMD) and also switchable graphics capability if it previously existed.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Dolby Home Theater v4 not working after upgrading to Windows 10

Hi there, I just upgraded to Wndows 10 Home from Windows 8.1; everything went smoothly except for the fact that Dolby Home Theater v4 does not work. I had to reinstall it using the .msi file found in the Realtek Audi folders. I chose v4 over any of the other versions because I like how I can tune the equalizer to my liking and different uses. Anyways, the regular audio works and Dolby is turned on but there is no activity appearing on the equalizer and my music does not change once adjusted. Had this problem when doing an optional audio driver update in the past when I was running 8.1. I do not have the option to rollback the driver after upgrading to Windows 10. Does anyone have a solution to this issue or know what the correct Realtek driver is to make Dolby work? This is one of my favorite features of my laptop and I really want it up and running again! Thank you in advance! JakeStiebs My unit: Lenovo Ideapad Z580 running Windows 10 Home with Realtek Audio Driver 6.0.1.7535

one more thing. I was not able to download cleanup tool/online scanner too. but may be it has something to do with my internet bandwidth. and other strange thing i observed is that before restart i was not even able to turn off all security features. but after restart that problem seems to be corrected.

ThinkPad X240 WWAN not working after upgrade to Windows 10

Hi, My 3G Card stoped working after upgrade to Win 10.I tried latest drivers from Lenovo but with no success. When I open Device Manager the Card is shown as properly installed but the driver manifactire is Microsfoft not Lenovo/Ericsson When I try to reinstall the driver the installation package poppup a message 'No action was taken as a system reboot is required'On the network connections the Mobile Netork is disabled:after trobleshooting on the connection I recieved and error: witch code 36. Is there a solution available ? regards,stuckoff

Which Operator and Country SIM card you are using ?Error Code 36 is regular deactivation. Do a Windows update , Restart then Shut Down System and start ( TYhis Power cycles the Device ) . From your Screenshot it Looks like the Cellular Data is not ON and Microsoft cellular service is in some mismatched state after upgrade.After restart press like in below screenshot order 1 --> it turns cellular on or off, 2---> It will take you to settings page 3--> Connect from here. Dont ask why Microsoft made connecting to WWAN device so complex

Ethernet LAN not working after upgrading to windows 8.1

After upgrading from Windows 8 to 8.1, my Ethernet LAN is no longer working. Wireless LAN connectivity is OK. I have run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I do not see a 8.1 driver listed for the Ethernet LAN.

You're very welcome. See if the recovery manager still works so you can roll back to W8. Please read this guide for how to use it. http://support.hp.com/us-en/document/c03489643 If it doesn't then you will have to order a set of recovery disks from HP, or you can install this plain W8 OEM software this guy has posted on a link. Lots of folks have used it successfully, which is why I posted it. https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?pli=1 Then use this tool to make the iso file bootable to a DVD or 4+ GB USB flash drive. http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool Yes, that really stinks why you and I could not upgrade without an issue. I disabled about 5 or 6 devices in the device manager and the code 12 would not go away. I have no clue why the PC works fine on W8 but not on W8.1. My notebook is a few years older than yours and it worked fine on W8.1 but not on W10. Go figure...

Bluetooth Not Working after upgrading to Windows 8.1

My Laptop is HP Pavilion G6 2015 tx after upgrade to windows 8.1, bluetooth is not working also the battery drain has increased anyone know a fix atleast for bluetooth problem ???

You're very welcome.
That is very interesting, because I didn't know of anyone who upgraded to W8.0 with a Ralink wireless card with the BT 3.0 radio that got the BT to work at all.
We tried the W7 drivers, and they didn't work.
That is why you don't see a W8 Ralink BT driver for the bluetooth on your PC's support and driver page amongst the other 11 drivers listed.
The Ralink 3.0 version of BT is not supported in W8.
While somehow the BT has worked in W8 for you, I'm afraid your luck has run out.
Unless by some fluke, HP installed a card with the BT 4.0 radio on your model...
You can try this W8 driver for the Ralink card with the BT 4.0 radio, but don't get your hopes up.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp...

HP C7280 Solution Center won't work after upgrading to Windows 7

Similar Messages

Maybe you are looking for