HP CM1312MPF drivers don't work via Windows 7 but works fine via Linux dual booting

HP CM1312MPF drivers don't seem work using Windows 7 (64-bit) . Original HP drivers CD now lost. Current drivers were downloaded from HP's website. (This webpage has a number of drivers and most 64-bit ones have been tried. Prior to my Windows re-install, the machine printed and scanned satifactoralily in Windows 7. One day this O/S refused to boot and had to be fully re-installed. The reinstall has been tried on both a SSD and on a HDD. (I have 3 x HDDs and 1 x SSD in this Desktop system. and I dual boot Windows7 and Linux Mint with data on its own HDD.) No attempt has yet been made to scan after this Windows re-install, as I have a separate photo scanner. I mainly wish on the to print on CM1312MPF, however it did scan perfectly well prior to the reinstall of Windows. THE CM1312MPF PRINTS FINE VIA THE SAME USB OUTPUT LEAD (AND POWERED HUB) AS VIA LINUX MINT 17 (PETRA) when I dual boot and without any PHYSICAL CHANGES between changing O/Ss. It must be a driver problem, surely, mustn't it? I look forward to your help. John_of_Penrith

You can also disable that windows wireless "Critter" from device manager and it shouldn't ever again show-up in your adapter list. Thanks for the lesson. I too have wondered about the windows virtual adapter and what it's for. I never had it show-up in my adapters though in the network and sharing center. That was strange that it happened to you. I also occasionally just go to device manager and reload the adapter that came with laptop-not the windows one. It
seems to keep it running fairly well since there have been no new drivers for it. I think it was an experiment or something called the DW1501 Wireless half-mini n that came with my Dell Inspiron N7010 laptop. I don't particularly like it as compared to the other wireless adapters in my home, this thing is slow on downloads, but I don't want to bother to get a new adapter.
Anyhow thanks for the interesting lesson.
LindaSView

Similar Messages

Dual Core Center working in Vista but not XP on a dual boot system?

Hi All.
My system specs are:
Dual Boot Windows XP Pro SP2 and Windows Vista Ultimate
Temps for CPU in Vista averaging at 43 - 45 degrees in XP averaging at 38 to 42 degrees. It never seems to go much higher than 53 on Load.
Thermaltake Soprano tower
MSI K9N Diamond Motherboard
Hiper 580watt Modular PSU
4GB OCZ Gold 6400
AMD X2 6000+
2 X 300gb diamond maxtor 10 HDD
MSI Geforce 7800gt
DVD Rom
LG Dual Layer DVDRW+/-
I am running a dual boot system with Windows XP Pro SP2 on one partition and Windows Vista Ultimate on the other. Both operating systems seem to be operating properly except for an odd situation with Dual Core Center. In Windows XP Dual Core Center only indicates the Mainboard properties - No VGA, whereas on Windows Vista Ultimate Dual Core Center indicates both VGA & Motherboard properties. I have installed MSI Nvidia drivers for the Graphics card & also tried straight Nvidia drivers for the card but it has made no difference VGA will not show up in XP. Yet on installing Dual Core Center on the Vista partition VGA showed up immediately. Can anyone help.
If anyone can come up with an answer to this it would be a real help.
Many Thanks in advance.

have you try to update/install the dual core driver from amd?

2 Questions - Vertical Menus don't work on Windows but work on Mac

I have made a horizontal menu with vertical drop downs. Then drop down menus work properly in all "mac" browsers, (Google Chrome, Firefox, Explorer, Safari) but they don't work at (drop down) all on my pc laptop using the same browsers. (Google Chrome, Firefox, Explorer, Safari)
Why would they work on one platform and not another? Is there something I can add to my source to fix this?
Also the menu is located above a flash image and on the PC the menus go behind the flash animation instead of on top. It drops down over the flash animation in the mac browsers but not the pc browsers. The Z Index is set to 1000 so that should be correct. Any ideas what's up?
Also, what would be an inexpensive or free menu creator tool to replace Menu Machine? Does Dreamweaver CS4 have a simple menu creator?

So why does the menu appear above the flash animation in all mac browsers and not in Windows browsers?
It's caused by different browsers on various platforms giving a higher priority to flash objects. Also different among update levels within same browsers. For example, Firefox.3.0, Firefox.3.6... Safari 3.0, 3.1, 4.0...
What is "jQuery Cycle" and how do I use this instead of flash?
jQuery is a common JavaScript library. Cycle is a plug-in for making images fade in/out, etc... See the demos.
http://jquery.malsup.com/cycle/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

CS6 Plugin works on windows but not mac

Hi,
We have been developing a plugin for InDesign since CS3 and have recently ported it to CS6 (it was ported to all previous versions too, as they came out).
I followed the porting guide etc. and on windows it compiles and runs just ok - the plugin works correctly.
But when i compiled the same files on our mac machine and put the .indesignPlugin file in th plugins directory i can't see our plugin's context menu.
I can see that it is in fact loaded on startup (when i remove it ID loads 325 extensions, when i put it back - 326), but still it dosen't seem to work...
I initially thought that the versioning was off but our PluginVersion resource relies solemnly on SDKDef.h , i also tried putiing the file in CS5's plugin directory and got an error message that CS6 is required - so the version info is fine i guess.
We are using xCode 3.2.5 (because we have to support Mac OS 10.5 and 10.4) to build on mac and i've never had problems before - it worked on CS4, CS5 and CS5.5.
The changes i made when porting were minor and only in the code - so what has changed? and how come it works on windows but not on mac?
Any input is greatly appreciated, i've already spent days trying to understand this.
Thanks,
Dan.

Hi and thank you for replying.
The resources do get compiled correctly (i assume this because we do get a .indesign file at the end - which means the ODFRC ran ok). they are linked correctly in the mac project (i saw a file that determines the version - it's linked the same way against my win and mac projects and the win version works fine so i guess that's ok too).
the context menu is just another menu on the "menu bar" (don't know how to call it?) - i.e where the "file" and "edit" etc. menus are.
I can't seem to understand how come this works fine under windows but not under mac - they are essentially the same projects linked against the same resources (the difference being iCode vs VC10 projects).
can this be related to the fact we're using xCode 3.2.5?
Thank you.

Works on Windows but timeout on linux

I have a problem with the code below. It perfectly works under Windows, but I am getting a timeout under Linux. I am not sure why. Any ideas?
One more thing: Under Liunx It fails when I am testing it using port 1935. However, if I test it with port 110, it works. On Windows it works with both ports (110 & 1935).
Thanks you!
Gustavo
            try {
                theSocket = new Socket(Address,Port);
                theSocket.setSoTimeout(Timeout);
              try {
                    BufferedReader inFromServer = new BufferedReader(
                            new InputStreamReader(theSocket.getInputStream()));
                    PrintWriter outToServer = new PrintWriter(new BufferedWriter(
                            new OutputStreamWriter(theSocket.getOutputStream())), true);
                    outToServer.println((char)13);
                    messageReceived = inFromServer.readLine();
                    TmpPage = messageReceived;
                catch(IOException e) {
                    if (status == 1){
                        ErrorDescription = ErrorDescription+"ERRTEL01 Error in TELNETMonitor Thread: "+e.getMessage();
                    }else{
                        ErrorDescription = "ERRTEL01 Error in TELNETMonitor Thread: "+e.getMessage();
                    status = 1;
                finally {
                    theSocket.close();
            catch(UnknownHostException e) {
                if (status == 1){
                    ErrorDescription = ErrorDescription+"ERRTEL03 Error in TELNETMonitor Thread (INVALID HOST): "+e.getMessage();
                }else{
                    ErrorDescription = "ERRTEL03 Error in TELNETMonitor Thread (INVALID HOST): "+e.getMessage();
                status = 1;
            catch(ConnectException e) {
                if (status == 1){
                    ErrorDescription = ErrorDescription+"ERRTEL04 Error in TELNETMonitor Thread (THE HOST DOESN'T RUN A SERVER ON THE SPECIFIED PORT): "+e.getMessage();
                }else{
                    ErrorDescription = "ERRTEL04 Error in TELNETMonitor Thread (THE HOST DOESN'T RUN A SERVER ON THE SPECIFIED PORT): "+e.getMessage();
                status = 1;
            catch(IOException e) {
                if (status == 1){
                    ErrorDescription = ErrorDescription+"ERRTEL01 Error in TELNETMonitor Thread: "+e.getMessage();
                }else{
                    ErrorDescription = "ERRTEL01 Error in TELNETMonitor Thread: "+e.getMessage();
                status = 1;
            }

GustavoN wrote:
...Under Liunx It fails..how?
>
Thanks you!
Gustavo
[ Don't use PrintWriter or PrintStream|http://forums.sun.com/thread.jspa?messageID=10642137#10642137]
outToServer.println((char)13);You should flush() the outputstream after writing, before you do a subsequent read on the socket's inputstream.
catch(IOException e) {
if (status == 1){
ErrorDescription = ErrorDescription+"ERRTEL01 Error in TELNETMonitor Thread: "+e.getMessage();
}else{
ErrorDescription = "ERRTEL01 Error in TELNETMonitor Thread: "+e.getMessage();
status = 1;
finally {
theSocket.close();
catch(UnknownHostException e) {
if (status == 1){
ErrorDescription = ErrorDescription+"ERRTEL03 Error in TELNETMonitor Thread (INVALID HOST): "+e.getMessage();
}else{
ErrorDescription = "ERRTEL03 Error in TELNETMonitor Thread (INVALID HOST): "+e.getMessage();
status = 1;
catch(ConnectException e) {
if (status == 1){
ErrorDescription = ErrorDescription+"ERRTEL04 Error in TELNETMonitor Thread (THE HOST DOESN'T RUN A SERVER ON THE SPECIFIED PORT): "+e.getMessage();
}else{
ErrorDescription = "ERRTEL04 Error in TELNETMonitor Thread (THE HOST DOESN'T RUN A SERVER ON THE SPECIFIED PORT): "+e.getMessage();
status = 1;
catch(IOException e) {
if (status == 1){
ErrorDescription = ErrorDescription+"ERRTEL01 Error in TELNETMonitor Thread: "+e.getMessage();
}else{
ErrorDescription = "ERRTEL01 Error in TELNETMonitor Thread: "+e.getMessage();
status = 1;
C'mon, Gustavo, you can have cleaner exception handling than that!
Edited by: ghstark on May 14, 2009 4:40 PM

MBA won't connect to iPhone or Jambox via Bluetooth, but works with bluetooth Apple Mouse

MBA won't connect to iPhone or Jambox via Bluetooth, but works fine with bluetooth Apple Mouse. When trying to pair with the iPhone it says "The Bluetooth Network is unavailable. There was an error connecting to your device. Make sure the device is turned on and in range." When trying to connect to the Jambox it says "Bluetooth audio failed. There was an error connecting to your headset. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted." The iPhone and Jambox pair together fine, and I have paired with both the iPhone and the Jambox easily in the past. I haven't updated anything - it just stopped working with these two devices. This is very frustrating.

I could not pair with Uconnect on a 2011 Jeep after upgrading to iOS 8.2 on an iPhone 6. After shutting off iCloud and resetting network settings I was able to successfully pair the phone to Uconnect

I have a maginon film scanner bought from ALDI. It works with windows but with OSX Maverick software it keeps crashing as soon as I try and capture an image. I cannot find details of software updates anywhere.

I have a maginon film scanner bought from ALDI. It works with windows but with OSX Maverick software it keeps crashing as soon as I try and capture an image. I cannot find details of software updates anywhere.

Same question answered here : https://discussions.apple.com/thread/5762314?tstart=0
I just popped in with using Mavericks (I got rid of my MBP about a year ago, and just got another one when I got an Air for my wife) and noticed that Mavericks is not working and playing well with a couple of programs I already owned (Paraellels, for example...yes, I spelled it wrong...). I looked for maginon.com and it didn't exist, nor was my google search directed to another location for them, so I postulate that the device may not be in production anymore, thus: no driver updates from the manufacturer.
From my mac-noob-layman's perspective: get some vmware, run windows and use the scanner in your virt machine to capture your images. Put the images in your mac side and work your mac magic on them there.
Peace

My Macbook Pro keeps dropping Wi-Fi when connected to my T.V. via HDMI but works perfectly when disconnected. Any solutions ??

My Macbook Pro keeps dropping Wi-Fi when connected to my T.V. via HDMI but works perfectly when disconnected. Any solutions ??

Same problem here. Way to go with regression testing, Apple.

Motion tracking is not working for videos but works for images?

Motion tracking is not working for videos but works for images. When the videos is drop onto the tracking object the videos corner don't appear highlighted. I am working on windows 7 with version 13.1.

ivanhoeeurope
Are you within 30 days of purchase for the Premiere Elements 13? And, did you purchase as a download from Adobe? If so, you can
apply for a return/refund for 13. If you purchased elsewhere, then you would be governed by the return/refund policy of the seller.
Adobe no longer sells version 12, so you would have to find a vendor who still has it in stock and purchase it. There is no way to "downgrade"
13 to 12.
What you may want to do is to download and install the Premiere Elements 12 tryout from the following web site to verify that 12 Motion
Tracking works for you; whereas 13 cannot with regard to use of video for the Motion Tracking source media.
Adobe Photoshop Elements 12 Direct Download Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
Apparently this web site does not sell the tryout. It just makes it available for use.
Before I posted my reply to you I looked at Motion Tracking with video source media on both Premiere Elements 12/12.1 and 13/13.1 on the same Windows 7 64 bit computer.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

The "new" hotmail no longer works with safari, but works with firefox. Hmm.

The "new" hotmail no longer works with safari, but works with firefox. Hmm. i find this very convenient being a microsoft product. anybody else wonder why this new version happens to not be safari compatible? does anybody know if it works on the PC version of safari? if not, i find this to be a blatant move on microsofts part to bias the safari browser (especially since its basicly new on the window platform). forcing safari/hotmail users to "have" to use another browser to access their hotmail accounts.

I have been successfully using Hotmail and Gmail with Safari for a long time. For roughly the past month, that relationship is rocky at best. At times, one of the following actions suddenly opens Hotmail, but it is a short-lived solution:
(a) Hotmail directly
(b) Hotmail Home>Hotmail
(c) Sign up to Windows Hotmail
(d) Deletion of prescribed cookies, resetting, etc. - made no difference
Both Firefox and Opera work fine with Hotmail - especially Opera is very fast.
In addition, Safari and Gmail does not work with Attachments, but otherwise Gmail is OK.
I suspect I have to wait for a Safari fix because in my case I do not wish to abandon Hotmail, and Safari is a given. I would think that Safari would want to stay competitive with the two biggies, Hotmail and Gmail, which must have large numbers of users.
I certainly would appreciate any other suggested fixes.

People picker is not working for ie11 but working fine for other lower version

i am using sharepoint 2010 and windows authentication
recently i have updated my ie to ie11 and problem goes here.
when i try to select from people picker, there are an unexpected error happened
however when i use other ie version, people picker work fine, what goes wrong?
i have already added my system as trusted site
if there any others thing i miss out?

Hi,
According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Mac Pro Dual Quad Core won't boot OS/X, but plays fine with Linux/Windows

I've got a Mac Pro Dual Quad Core won't boot OS/X, but plays fine with Linux/Windows. I've tried all of the following initial tests as suggested on forums:
-Ram swaps
-Alternating video card in PCIe slots
-Trying alternate video card
-resetting pram and smc
-Multiple tests with memtest86+ over 26hrs and no failed ram
-Multiple tests (8-12 cycles) with apple HW diagnostics and no problems
-Firmware is approved firmware for early 2008 model...no new updates.
Gentoo livecd works fine and I even installed to hard drive and it boots fine with it. In addition to above tests I also ran a linux stress test putting all 8 cores at a load of 22 for 2.5hrs with no problems.
Memtest86+ for 24hrs+ yields no problems.
Where problems occur:
Booting off hard drive, DVD or firewire yields an immediate curtain of death and booting off a new snow leopard DVD dies about 25% into the install.
Looking at error log and a quick dmesg shows "Package 0 didn't get an HPET" and complains about AppleIntelCPUPowerManagement.kext. Google turns up illegal uses of this, so doesn't apply to my use case.
I'm a bit stumped since all was working well until one day it was non-stop curtains of death and can't get them to go away.
A logic board replacement at $1100 is not a feasible option for something that works on linux and windows, but not OS/X, is a bit disappointing and somewhat surprising.
Thanks for your help and advice.
Regards,
Marcos

Someone here once thought they knew EFI and Open Firmware a little, and used some commands from OF library that an Intel EFI Apple system didn't like. New logicboard.
Of course to run or boot OS X and see video you need EFI based card. The presence of some PC cards can block OS X from booting.
The fact you get part way through SL DVD, pull all the drives, put in a new drive and format it from SL DVD.
Most of the things you tried are what are more common with PC hardware. Including where people have tried and failed to install OS X on unsupported hardware.
I suppose it is possible something tried and failed to modify the Mac's firmware.
If you have Windows running, and you have WD drives, WD just posted new Lifeguard utility which is what I use to do a good job of stripping a drive down and recertify it for reuse, works wonders. Maybe same for other makes with vendor utility.

My ipad 2 and iphone 4S won't connect to app store via wifi but will connect via 3g

my ipad 2 and iphone 4S won't connect to app store via wifi but will connect via 3g - both are running 6.0.1 - I have tired several wifi networks but same result.

Hi LandJ1980,
I would recommend first trying these steps:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that does not work, this article has some additional ideas to try, even though you are only seeing this with the App Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers!
- Ari

My keyboard is not working in "Pages" but works with all other applications. Please provide resolution advice.

My keyboard is not working in "Pages" but works with all other applications. Please provide resolution advice.

What version of Pages?
There are one or two of us here who are not intimately acquainted with your particular set-up.
Peter

Hp1022n printer doesn't working on windows 2008 R2 x64 via RDP from windows 7

Dear Sir,
i have a network of some windows7 and some server 2008 r2 Terminal Services, There is
a hp 1022n printer . when i print locally from windows7 , the
print comes very smoothly but no printing from windows Server 2008 R2 via RDP. i had installed driver for hp
1022n + (windows 7 x64) on server 2008 r2 but it still doesnt print.
note there are other printer installed (via TCP/IP ,hp jetdirect printing) and they working finely on
server 2008r2.
so give me a stable solution for printing on hp 1022n + printer via RDP server from windows 7

Hi Mahya,
Thank you for posting in Windows Server Forum.
Did you receive any particular error for your issue?
Please check the link provided by Hari, you can use RD Easy Print driver for server 2008 R2.In addition, if possible try using Universal print driver for your case.
Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

HP CM1312MPF drivers don't work via Windows 7 but works fine via Linux dual booting

Similar Messages

Maybe you are looking for