Hp co-ouder starts up shows the hp logo and then it says monitor is going to sleep
hi guys
i have this hp computer for like almost a year and i really enjoy it but for some weird reason the next day my pc did something strange when i click the power button it goes on and then it shows the hp logo and then after a little while it shows a message monitor is going to sleep and then it restart itslearning till i turn it off
can anyone pls help me with this problem i didnt find anytime on the internet
already thanks for helping
Hello @i__need_help,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your computer automatically enters sleep mode before it can boot into Windows, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend booting your computer using Windows 7 Safe Mode to change the power management settings.
If you are able to successfully boot into Windows, please follow the steps below to restore the default schemes on your system:
Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command Prompt
Step 4. Click Run as administrator
Step 5. At the command prompt, type powercfg -restoredefaultschemes and press Enter
reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!
Similar Messages
-
My Iphone doesnt start normally it turns on, shows the apple logo and then turns off again but only while its charging. Before it turned on completely and i saw the charging tag that it was chraging normall but then it turned off again? I have tried totall reset nothing works! Im lost please help!
Try this to help
http://support.apple.com/kb/HT1808 -
accidentally cancelled my 5.1.1 update and now my screen shows the apple logo and then it turns black and then the logo over and over again i cant turn it on fully
Check out this Apple article -> iOS: Unable to update or restore
Can you put the iPhone into recovery mode? Do you see an error number when trying to restore the iPhone? -
my ipod touch does not turn on after steps 1-4. It only shows the apple logo and turns off
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Nano is showing the apple logo, and then is going straight to exclamation
When i turn my Nano on, it shows the apple logo, then goes straight to the folder with the exclamation mark...i called apple and they told me t send it in, and i wanted to know if there is any way that i can take it to the store, so they fix it there free of charge? HELPPP!!
thanks,
Mike
Dell Inspiron 8100 Windows XPHave you tried this?
iPod shows a folder icon with exclamation point when you turn it on
HP Desktop Windows XP iPod nano -
Please help! I have a camp tmrw and idk how to fix my phone..
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these. -
My iphone wont turn on after i updated it
You have an iBrick until you can get to a computer and restore it.
~Lyssa -
My iphone will not stop showing the apple logo and rebooting
How can i get my iphone 5 to stop rebooting and actually show my screen. All it does is show the apple logo and then its goes away and the screen stays on but shows nothing. I can triple click to invert colors but that only makes the black screen white. My lock button does not work either so i cannot hard reset
It appears you have a hardware failure. Certainly the lock button has failed. Without that button you cannot reset which is the first thing to try in cases like yours. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
-
I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then goes black. The sleep light pulses. From there, I can't turn it off normally. I have tried restarting the PMU. And I have tried unplugging the ac adaptor and removing the battery. From there I have plugged only the ac adaptor in, and it will begin to start but do the same thing once it shows the blue screen.
I tried only using the battery (without plugging in the ac adaptor) and the same thing happens. I tried starting the computer while holding down CTRL, Option, P, and R, waiting to hear the start up chimes 3 times, and then holding Shift as it starts up. But I still get the black screen once I see the blue one, and the computer's sleep light pulses.
I need something very important from this computer. And was able to start it last night. I did not shut down the computer, and was going to take it to a friends to use his printer today. The computer was in sleep mode in the morning.
Thanks for any help!
GinaWhat your describing could be a logic board or memory issue.
You did or did not hear 3 startup chimes? If you hear 3 chimes when you start it, that would indicate a memory problem. Try reseating the memory to see if that makes a difference. If you have 2 RAM cards, try one then the other in each slot. If you have 1 RAM card, move it to the other slot. Powerbooks can develop one bad slot.
You may need to pull the hard drive out of the Powerbook, put it into an external case, then read it from another mac. -
Dear gentlemen:
i know how can update ios update but when i make update my iphone shut down and it can't start.
it always Show the apple mark and then disappear i can't make any thing i need know what can i do ?
thank youContact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
i just update my iPhone which was previously jailbreaked when i update it after downloading all the file it start to show the apple logo for a moment and it went and completely turned off i tried to connect through iTunes but it doesn't show any iPhone connected to itunes
No support for jailbroken phones will be given in this forum or from Apple.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and… -
I turned my iPhone off and when I started it up is has "frozen" showing the Apple logo and several lines of text. Any thoughts?
Never mind... i figured it out!
-
MacBook won't start up it shows the apple logo and just keeps the "wheel" spinning
MacBook won't start up it shows the apple logo and just keeps the "wheel" spinning
Usually means that critical system files are corrupted. Start by:
Boot into Safe Mode if possible. If it boots into safe mode, then restart the computer to see if it will boot normally. Otherwise, reinstall OS X. Unfortunately, you've not provided any information in your profile about what version of OS X you have installed. -
I am trying to get my contacts of an old iphone 3. It show the Itunes logo and the usb connector of the phone charger. How can I get that off the phone and access my contacts.
Ideas anyone?You need to plug it in to iTunes. Once it starts working again, back up the old iPhone to iCloud then go to iCloud in settings. Turn on contacts then you get them back. Another option is to back up to iTunes with the old one, then on the new one, go on iTunes, click restore backup, and choose the old iPhone. I suggest using icloud. Hope it helps!
-
MORNING HAVING A PROBLEM WITH MY Z10 WHEN SWITCH ON IT SHOWS THE LOADING LOGO AND NEVER COMPLETES THE LOADING PROCESS.YOUR HELP WOULD BE APPRECIATED
Checkout this thread: http://supportforums.blackberry.com/t5/BlackBerry-Z10/Z10-stuck-on-loading-logo-on-starting-up/td-p/2517909
Maybe you are looking for
-
Error while converting data from CATS to CO
Hi Experts, We are transferring the HR timesheet data to CO.while uploading the time sheet data to CO through transaction code ZAFU we are getting the following error.Any help is greatly appreciated Trans: KB21N | BTCI-Creation_DD_CO_Actual_Activity
-
Acrobat 9 pdf links not working from InDesign CS3. What is wrong?
My links are working in my 40 page Indesign CS3 file using Mac. After I convert to a .pdf, some of the links are no longer going to the right location. They have either duplicated other links, or trying to take me incorrectly to my desktop or network
-
Can't publish or export project-error code -108.
I created a project with videos, photos, music etc. The lenght might be a bit long (1h.17) but I did not find any information about a specific limit...When I tried to publish in 1080 hd or any other resolution or even export to quick time after about
-
Shipment cost - Europe VAT for carrier
Hi All, I have problem in creating condition records for tax condition type. I am using below access sequence for tax determination in shipment costing country of departure ALAND , country of destination LLAND , country of service agent TDLNR_LND And
-
I have a class that imports : import com.sun.xml.tree.ElementNode.*; in this class i use createElement function, getElementsByTagName it gives an exception as : java.io.NotSerializableException: com.sun.xml.tree.ElementNode The console output is: jav