HP Color Laserjet 1515n won't print

Haven't been able to find an answer anywhere. Even disconnected from the network and stand-alone, the HP Color LaserJet 1515n (product number CC377A bought at Costco not too long ago) won't print. Can't print configuration page, no demo page. Nothing. It just sits there saying "printing" and flashing but never does anything else. Tried resetting through the menus. Didn't work. Tried holding down the right arrow and X to reset NVRAM. Didn't work. Any help? For when I do get the printer to work on it's own, I'm on Windows 7.

Hello dp146,
I understand your concerns. Unfortunately, I need to direct you to our Enterprise Business Community Forums.
This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP.

Similar Messages

HP Color LaserJet 1515n fails to print

HP Color LaserJet 1515n fails to print
I had this printer just 13 months, and it has stopped working without giving any kind of error code.
I ran my black down to 1% using override - and then nothing. The printer accepts jobs and appears to do everything up to the point when it should start feeding paper through the printer transport.
I changed the black toner, but it made no difference.
To avoid complex print driver problems I have been using a simple txt file with 'hello world' for testing.
Having reinstalled the drivers.
I have done a very extensive web search, I cannot find any appropriate help.
I took the side off the machine to reveal the electronics, and tested all the connections etc, but cannot find anything obviously wrong.
The transport mechanism seems ok, because the manual feed slot accepts paper and pulls it in, but then goes no further, ie to actually start printing.
The calibration process seems ok, and all the 4 color cartridges seem ok, and the spindles on them obviously turn having marked them to see if any were stuck.
As there is no error code in the log file, I cannot see what is wrong.
Does anybody have any idea what is wrong? Are there and tools that can be used to interrogate the printer further?

Wait a minute! It's only certain Indesign documents that won't print.
All TextEdit docs will print.
I created a few scribbles in Photoshop and they print.
But with InDesign, there is no predicting which documents will print or will not print. On some that will not print, if I remove all but one text box, then they will print. On other documents that do print, if I copy some text off of one that won't print and paste it in, then that one stops printing too.
On some that won't print, if I erase everything on the page and create a new text box and type a few words into it, the page will print. If I revert to the previously saved version, once again the page won't print.
What kind of craziness is this, anyway? It seems random. I can't figure it out.
Even on the documents that won't print, when I try to print them the printer's activity light blinks as though it is just about to print, but then the light goes out without printing.
Anybody got any ideas what this problem is and how to fix it?
All I know is that EVERYTHING printed before I upgraded from 10.3.9 to 10.4.9.
Tom

HP Color Laserjet 2605dn won't print the red color

My HP Color Laserjet 2605dn won't print the red color. It's comes out very light, barely a pink color. It's not the ink cartridge because it's full and I'm having this problem even when I change cartridges.

Hello dp146,
I understand your concerns. Unfortunately, I need to direct you to our Enterprise Business Community Forums.
This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP.

Color laserjet CP1525nw won't print in color

I installed both the PCL6 and PostScript drivers on my Surface Pro 3 to print to my Color LaserJet CP1525nw. The printer is connected to my router. The printer prints but only in grayscale. What can I do to be able to print in color and continute to print through my router?
This question was solved.
View Solution.

Hi @PaDunc ,
I see that you are experiencing issues printing in color from the printer connected to the router. I would be happy to help you.
Please clarify, if the printer is connected to the router by a ethernet or USB cable?
Did you install just the Universal Print Drivers or did you try the Full Feature Software also?
I would recommend the Full Feature Software if that isn't one of the drivers you have already tried.
Try and print the Supplies Status page to see if you have color, just to rule out a hardware issue.
Printing or Viewing the Supplies Status Page.
Make sure the greyscale option isn't enabled in the print driver.
1. From Devices and Printers, right click your printer.
2. Then click the Printer Properties, Preferences button.
3. Click the Color tab.
4. Make sure Print in Grayscale isn't checked.
Did the colors print?
What are the toner levels?
Are you using Genuine HP Toner?
Try these steps in this document, to see if it will resolve the issue.
Resolving Print Quality Issues.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Color Laserjet 3600n won't print from network

Our small office has an HP Color Laserjet 3600n that has worked great connected to the network via ethernet cable for many years. When we came in this morning it refused to work after a power outage last weekend, and print jobs would just remained trapped in the print queue with either "printer unavailable" or "printer is busy" messages. No error messages appearred on the printer, and it prints fine from an attached USB cable. I verified the network cables, and am even able to access the printer's web interface a-ok via it's web address. It normally operated on all the default settings, I believe, and I can't figure out what else could be the problem other than a hardware fault. Any clues? We have a bunch of toner cartridges and would hate to have to buy a new unit now.

Hi,
Please follow in the link below :
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

HP Color Laserjet 2605dn - won't print in color

I have an HP Color Laserjet 2605dn printer and recently purchased a new computer with Windows 7. Our IT dept. installed an updated driver (HP Universal Printing PCCCCL 6) but now my printer will not print in color nor can I find a setting where I can adjust it.
I also cannot duplex but found helpful post that I will use to try and correct that issue. If you can help me I would appreciate it. IT seems to busy to help and my work involves a fair amount of graphics so I need my color.
Thank you!!!

This post may be old but someone might use it later. Right click on the printer and go to properties. On the General tab go to printing preferences. (Windows 7- double click printer, click Adjust print options.) Advanced tab - expand Graphic, under Image Color Management change: ICM method to ICM handled by printer or host system. Apply and close out the windows. Run a test print to make sure it works.

HP Color Laserjet CP1215 won't print on local computer

I am using Windows XP.
I have an HP Color LaserJet CP1215 connected to my computer by a USB cable. It has printed many times, but I don't use it often. I turned it on this morning to print an excel spreadsheet in color. I use an HP Laserjet 4100 connected on a regular printer port for most of my printing. Anyway this printer will not print from any program. It will not print a test page. I turned it off and on; restarted my computer; switched out USB cables; downloaded a new driver from HP. I also download the diagnostic tool from HP and when it scans it, it finds it and says it is fine, but it will not print a test page from the diagnostic tool. I have stopped the printer spool and restarted it. I have done absolutely everything I can think of or that I have seen as a solution on HP.com and in my windows printer diagnostic tool.
The weird thing is it prints when connected to another computer. I hauled it to another office and connected it to another computer (Windows 7) and when connected it told me there was a problem with the driver, so I downloaded a driver from HP.com and it worked fine. The REALLY weird thing is I can share it on my computer, go to another office, add it as a network printer and it works. Why would it work as a shared printer, but not work for the computer to which it is physically connected?
When I attempt to print, the document shows up in the printer spool and says "printing." Then after a few minutes, it says "deleting" even though I have not manually deleted it.
Anyone have any ideas? I am fresh out. I hate to think I have to walk to another office in my building to print to a printer that is right beside me. Although it may be a good exercise.

I am currently in the same boat. I love how you posted this legitimate issue 3 years ago and there is still no resolution. It really reflects on the company's character and attitude toward their customers.
Hopefully this will get a response.

Color LaserJet 2605dn for wireless printing, it keeps printing the first page over & over

When I use my Color LaserJet 2605dn for wireless printing, it keeps printing the first page over & over again. I have to cancel print job on the printer in order to stop it. It works properly on the computer that is directly wired to it, but won't on any other computer that I try to print from. I have had this problem for some time, but now have certain thing that I must print from this printer & can't do it wirelessly. It doesn't seem to be my network, because I can print from all of the other computers onto other wireless printers I have in the office.
Any advice would be appreciated!

Hello,
Thanks for the post. I've attached a link below that may assist. Good Luck!
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

LaserJet 1020 won't print first document after powering up

My LaserJet 1020 won't print the first document it receives after powering-up. Print manager shows that the document is being sent, the printer makes noise like it's getting ready to print, but the document is never printed and I don't receive an error messages. If I send the document again the document prints as does every document there after.
I'm using Windows Vista Professional and the printer is connected via USB 2.0.

Hi jnickelsen,
I understand the printer won't print multiple copies.
Thank you for your reply.
I will be happy to help you with this.
This printer doesn't have the Mopier settings.
What drivers are you using?
Did you download the drivers or are you using the Windows preinstalled drivers?
If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet P2055dn won't print pdf files

I have just hooked up a new iMac with Mac OS 10.9.5 and now my reliable HP Laserjet P2055dn won't print .pdf files anymore--it just hangs for hours. I am an academic and work 50% with pdf's. I tried to download a new driver from the HP site for all MAC OS systems 10.7 and up, but the message when the download was finished opened up in a little box that reads: "ljp2055_Firmware_Upd Image not recognised."
I've unplugged, plugged back in, turned off, turned back on countless times. Don't know what else to try?
Thank you.

Hi john, I did some looking around and maybe try this page for some tips, sometimes the microsoft forums help me out dearly.
http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/unable-to-print-pdf-files-with-wi...

HP Laserjet P1006 won't print "Printer Offline"

My hp laserjet p1006 won't print and the error message says "printer offline". The printer does show up in System Profiler. The printer is on, and connected via USB. Ready light on printer is on. Sometimes the orange light blinks but is mostly off. I tried different USB ports (eliminating the hub) and switched out the USB cable. Restarted computer and printer, updated driver and repaired disk permissions. I recently switched to Snow Leopard but the printer has printed since I switched numerous times.
I had this problem 2 weeks ago and finally it fixed itself, but since a restart it doesn't work. Any suggestions?

Ken Spiker wrote:
Yes, I just downloaded the Apple HP update 2.3. The driver that was showing in my Printer Setup Utility was 1.2.0.224. Now I downloaded and installed 2.3 but the Printer Setup Utility only shows 1.2.0.224. 2.3 is not listed in the driver list. Why is that?
2.3 is the version of the update, not the version of the driver.
According to http://support.apple.com/kb/HT3669, 1.2.0.224 is the correct version of the HP driver.
Final question: why do I have problems nobody else does?
People are having a variety of problems. It may be because of permissions, previous versions of the HP software that was installed and not deleted. Since there wasn't support for this printer on Snow Leopard until the 2.2 update, it's hard to guess what the issue was, but you're not alone - read some of threads here.
If you run into this problem again, delete the <hard drive>/Library/Printers/hp folder, delete your printer from Print & Fax, then run Software Update and re-add the printer.
Hope this helps.

Suddenly, my HP Laserjet 6mp won't print. The icon says it's in use (but it isn't), at other times it says it's not connected (but it is). Help!

Suddenly, my HP Laserjet 6mp won't print. The icon says it's in use (but it isn't), at other times it says it's not connected (but it is). Help!

That page's troubleshooting for the "Filter failed" message worked out. I consulted the Wiki before but never found that exact page. I guess I didn't use the best search criteria. Thanks for pointing it out.

HP Laserjet 2550L Won't Print In Color

I recently upgraded to Leopard, and now my HP Laserjet 2550L will not print in color. I've tried printing for several different apps, but they always come out in b & w. It does however print in color when printing a test page from the printer itself, so it must be a driver issue.
Currently I'm running with the "HP color Laserjet 2550 series" driver available via PPDPicker. I've also tried several other drivers listed there to see if by chance one of them would work, but to no avail. I downloaded and tried installing HP Laserjet v5.5.2.051 from HP's website, but I can't get it to install. Actually this driver doesn't even show up in PPDPicker, because for some reason it saves as a text file, which seems weird since the dmg file is about 17mb.
Anyway, this has been driving me nuts all night, so if anyone has a solution or suggestion, I'm all ears.
Thanks.

I see you are having a print quality issue, no color on page, with your M251nw Laserjet. You changed the toner cartridges and the printer is still not printing in color. Have you tried taking all the color toner cartridges out of the printer and reseating them to make sure they are secure in their positions?
As well, I would advise taking a look at the document linked below. It will walk you through the process for troubleshooting a print quality issue with this printer.
Troubleshooting Print Quality Issues
Let me know the results.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

HP LaserJet 1320 won't print in color (Win7 64 bit, new cartridge)

I can't get my HP Laserjet 1320 to print in color any more. Changed the cartridge. I'm on Windows 7, 64 bit, but the issue started before the upgrade to Win 7. I can't even find the selection for color vs black and white printing.

The LaserJet 1320 printer is a monochrome printer, not a colour printer.

Laserjet 2605dn - Won't print the color RED

My 2 year old 2605dn is acting up. When I try to print a test page made up of several colors the color red comes out orange on the left side and fads to yellow on the far right side. I have changed the toner cartridge (all cartridges are HP, no knock offs or refilled cartridges, EVER!), but the problem still exists. I printed the supplies status page and the red column shows a full cartridge but the color is a pale pink, not red.
Can someone tell me what's going on?
Is the printer failing?
Can this problem be fixed?
Thanks for any help!

Here is what to do:
http://www.reeves-hall.net/wp-content/uploads/2008/02/Fading-Red-Tones-on-Color-LaserJet-2600s-by-Do...

HP Color Laserjet 1515n won't print

Similar Messages

Maybe you are looking for