HP Color LaserJet 1600 does not work

Hi, I purchased a HP Color LaserJet 1600, it is said/written that the printer will work for Windows and Mac. Am running the MacBookAir with Leopard, it doesn't work, even the CD to install the driver my hard drive doesn't accept, I also can't download a driver from the net, does anybody know what to do? Thx in advance, MariaT.

Here's a link to the UK support site, I think you can get live help from here - but according to the HP website, the printer you just bought is an old model that has been discontinued, and I can't see any Mac drivers for it either.....
But it's puzzling that your computer won't read the CD....a quick browse through other HP Laserjet discussions in these forums gives me the impression that HP gives no support to Mac users and that other people have been having trouble with other HP models.
Maybe you've been swindled. Maybe you should demand a refund.
http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc =uk&prodTypeId=18972&prodSeriesId=1140734&taskId=110
By the way, other people have just started having HP printer problems a few topics further down the list. Maybe you should discuss with them here:
http://discussions.apple.com/thread.jspa?threadID=1835949&tstart=15

Similar Messages

  • LASERJET PRO 100 COLOR MFP M175 - does not work

    If I press the power button for turning on  , then both of LEDs "ready" and "attention" light  , and  display lights too. But the unit does not work.

    Hello OlegRu,
    Welcome to the HP Forums.
    I see that you are having an issue with lights flashing on the printer.
    Are you getting any kind of an error message on the display screen?
    Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Write me back when you have time with any additional information you can provide.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Laserjet P1005 does not work under Mac OS X 10.6

    Driver is not listed and downloading the driver from HP still does not work. Guess HP has not yet updated for Snow Leopard. Anyone have a work around for now?
    I use this little black and white laserjet for all of my documents. Also have a few color Epsons but I do not want to use those for quick and dirty documents.
    Any help would be much appreciated.
    Ken

    The temporary solution (works good) is to download old drivers for HP P1000-1500 series (v.1.04) at following link:
    http://driverscollection.com/?file_cid=399489231573f9b4ad62f5159c3
    Sorry for my bad english (I'm Italian)

  • HP Laserjet P1102 does not work with Windows 10

    I have just upgraded from Windows 7 to Windows 10 and whilst my Canon MG6150 works with Windows 10, the other printer HP Laserjet P1102 does not. Looking at the HP website it seems that the Windows 10 drivers for this printer are not yet available. Is there any way I can use the printer without the dedicated drivers? I have been told I should try to roll back but the printer is not recognised in device manager. Please help!

    Manual, Please let me know the outcome.

  • HP laserjet p1102w does not work with Mac computer version 10.8

    since i upgraded my Mac to 10.8 operating system, I am not able to use the ePrint function from my HP Laserjet P1102W printer. I was told that the current version of the firmware 20130213 does not support this function. Does anyone know when the new version of the firmware will be available to support this function? thanks much.
    This question was solved.
    View Solution.

    Manual, Please let me know the outcome.

  • My HP LaserJet 1022 does not work with my new computer with Windows 7. Can you help?

    I just purchased an HP p6803w CPU that runs on Windows 7.  When I try to connect my HP LaserJet 1022 it won't work.  Apparently, I need a compatible driver downloaded.  When I tried to download drivers from the HP website, it appears one of two did not install.  Help!  I am an online college student and desperately need my printer to work.
    This question was solved.
    View Solution.

    From your previous post, it sounds like at one point you are getting the pop up that says "installing device driver software," correct?
    If you are not getting this pop up in the lower right hand corner of you screen then I need you to:
    1. Try a different USB port on your computer. Some computer USB ports are "touchy" and if you try a different one it will work. It all depends on the make of the computer.
    2. Try a different USB cable. You might have a bad USB cable. Also, be sure that the USB cable isn't longer than 3ft long.
    3. Go into your device manager and see what printers have been installed. They should be listed under "printers" or "other devices" You might have to go to view and check show hidden devices to see these on your computer. If there is a yellow triangle or question mark on this device then you have a conflict with your computer. This is something in your computer causing this and not the software download.
    Keep me  posted.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Colorful Web Forms does not work in IE like it does in Firefox

    Well, I have this great colorful web form that I got from Paulo Vale. The colors of the textareas, textfields, and select lists all change colors as they should when I mouseover them and when I set focus and type in them .......... if I am in Firefox.
    When I try to run my application in IE, none of this works.
    Does anyone know what I need to do to get this to work in IE like it does in Firefox?
    Thank you,
    Maggie

    Yes, I can provide the code.
    Thank you, Andy
    <style type="text/css">
    select.slCamp {
    color:
    #000000;
    background-color:
    #FFFFCC;
    cursor:
    pointer;
    select:hover.slCamp {
    color:
    #000000;
    background-color:
    #E6FF97;
    select:focus.slCamp {
    color:
    #FFFFFF;
    background-color:
    #81AD00;
    textarea.taCamp
    background-color:
    #FFFFCC;
    textarea:hover.taCamp {
    background-color:
    #E6FF97;
    color: #000000;
    cursor: pointer
    textarea:focus.taCamp {
    color:
    #FFFFFF;
    background-color:
    #81AD00;
    cursor: text;
    textarea.taOptCamp
    background-color:
    #FFFFFF;
    textarea:hover.taOptCamp {
    background-color:
    #E6FF97;
    color: #000000;
    cursor: pointer
    textarea:focus.taOptCamp {
    color:
    #FFFFFF;
    background-color:
    #81AD00;
    cursor: text;
    select.slOptCamp {
    color:
    #000000;
    background-color:
    #FFFFFF;
    cursor:
    pointer;
    select:hover.slOptCamp {
    color:
    #000000;
    background-color:
    #E6FF97;
    select:focus.slOptCamp {
    color:
    #FFFFFF;
    background-color:
    #81AD00;
    </style>
    Andy, anything that has an 'Opt' in the name is used with a field or list that is optional. I did this so that there would be a difference in the manddatory and optional fields.
    Edited by: mjhamilton on Jan 5, 2009 12:01 PM

  • Font color (using css) does not work on ImageHyperlink

    Hello,
    I cannot change the font color of an ImageHyperlink.
    I am using a CSS style for ImageHyperlink.
    The CSS style that I applied is working fine for font-size and background-color but not for the color property.
    The behavior is the same on IE7 and firefox.
    I would like to apply a different style upon the category of my hyperlink.
    Is it a bug or did I miss something?
    Thanks,
    Val

    I am also facing the same problem. However, putting the styles in the Style property of the hyperlink works.

  • Hp laserjet p1005 does not work with hplip 3.13.8-1 [FIXED]

    Dear all,
    my usb laser printer is a HP P1005, and it works with linux since HP released the firmware and the drivers (both provided with hplip).
    I have been using this printer for 3 years now, with Gentoo and Archlinux.
    From the latest hplip update (3.13.8-1, on August the 19th), I am completely unable to print: the job is sent to the printer, which *seems* to start to print (i.e., a very quick mechanical movement/noise), than it stops and the CUPS web interface reports a "filter failed error".
    I tried to remove/reinstall the printer, to reload the firmware, but nothing helps.
    Only downgrading the hplip package to 3.13.7-1 version fix it.
    Is anyone else experiencing a similar problem?
    The cups logs seem not very helpful, any idea on how to gather any useful information to try-to-fix this problem?
    MJ
    Last edited by MajinJoko (2013-09-08 18:47:14)

    Thank you for your help.
    I run hp-doctor, which reported a wrong plugin version.
    So, I reinstalled the plugin (please note that the downloader needs /usr/bin/python to point to python2!), and now the printer works with the current version of hplip.
    Solved!

  • The "Delete chromatic color aberration" function does not work

    hello
    impossible to define the purple or green color of the fringe, after several attempts ....
    see photo attached, despite the presence of abundant green "impossible to define the color green"
    http://adobe.ly/17DskbS
    On or shortly well come this problem with the RAW photo?
    xavier

    Set both Defringe Amount to 0 (i.e. Both Defringe OFF) and check the 'Remove Chromatic Abberration' box just above the Defringe controls. If chromatic aberration is still present (green fringe) try manually adjusting the 'Green Hue Amount sliders ONLY.
    This may be helpful, but only in English:
    http://blogs.adobe.com/lightroomjournal/2012/04/new-color-fringe-correction-controls.html

  • HP Color LaserJet 9500 Duplexing - does not work

    It seems that Leopard has some major issues with Duplexing. I see quite a number of posts on this topic for a variety of printers.
    I have found that the HP Color LaserJet 9500 does not duplex from Leopard. It worked fine before the upgrade.
    I verified that the Duplexing option is selected in the driver's installable options.
    When i choose "two sided" from the print dialog box, it prints as one sided instead.

    No, in this case I am printing straight to JetDirect.
    However, here's the weird thing. It is now working sporadically. What I find curious is that there are two duplexing settings. One in General settings, marked "two sided", and one in Layout, where you can choose short edge, long edge, or no duplexing. I wonder if there is some weird interaction here. In any case, this is not well documented. There was never a "two sided" option in 10.4.

  • "HP laserjet professional utility" does not work in osx 10 (Yosemite)

    All the major functions of this printer work fine in Yosemite, but not the "HP laserjet professional utility"The driver shown in System Preferences/Printer for my Laserjet P1606dn is version 6.9 (I am unable to knowif this is the version provided by the latest HP printer update, which was installed via the App Store.) I note this exact issue was raised for OSX7 in November 2014, but for a diiferent model printer.  My printer is on my local wifi network, and that earlier case seemed to invove a direct USB connection. The solution offered in that thread, 4694464,may not be applicable now, so I seek advice In the panel for my 1606dn within System Preferences/Printer offers a button to launch the "HP Professional Utility", but when clicked an app launches called the "HP Professional Utility" but then nothing.  I am trying to access the printer controls that will keep it from turning itself off when idle, and the documentation says the "HP Professional Utility" will allow that change. Please advise 

    Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having some issues with adjusting the power save mode settings on your Laserjet P1606dn. I can help with that. First make sure the printer is plugged directly into a wall outlet and not a surge protector. If the printer is connected with an ethernet cable to a router then you may be able to do this instead:On the printer hold down the button that looks like a sheet of paper with an arrow on it for about ten seconds. This should print out a report.On your Mac open a browser and enter the printer's IP Address in your Address bar exactly as it appears on the page. When you are finished click on enter/return.This will open the printer's Embedded Web Server. In here you may be able to find some options to adjust the power save settings.If the above does not work then this troubleshooting may assist you with the utility:Go to Applications, and if you have it open the Hewlett-Packard folder.Run HP Uninstaller to remove any existing software from you system.On the Mac go to the Apple icon and Sytem Preferences.Open Printers and Scanners.Hold down the Command key and click on the picture of your printer on the left.Click on Reset Printing System.Go to Applications and Utilities.Open Disk Utility.Click on Macintosh HD on the left.Click on Verify Disk Permissions. This should take about ten minutes.Click on Repair Disk Permissions. This should take about ten minutes.Restart your Mac.Plug in the USB cable between the printer and the router.Check for Product Updates on your Mac.Try running the tool again.If this resolves everything please let others know by clicking on Accept as Solution below my post.
    I hope this helps and I hope you have a great day! 

  • I changed my appleID, it worked fine but now I can not restore icloud backup in a new ipad (old appleid does not work and it is grey colored so I'm unable to change it)

    Some months ago I changed my email address and so my appleID. Everything worked fine, but last week my ipad broke and when I tried to restore my icloud backup in my new ipad it does not work: it asks me for the password of the OLD appleID (it doesnt work); and in icloud configuration page the field for appleid is colored grey so I can not change it.
    any clues? thank you in advance

    My suggestion is to change apple id back. I know it is not something you want to hear, but there are suppose to be ways around it and usually they work, but not right now. I suspect that is consequences of Apple getting their servers ready for ios7. Normally in your situation - you should be able to get all your stuff back, but apps, and then you can sync those or download from icloud. But lately (last week) it does not seem to work normal way.

  • HP Laserjet 1536dnf MFP document feeder does not work

    HP Laserjet 1536dnf MFP document feeder does not work. I tried the suggested unplugged/plug and wait the required time but still no luck. Any suggestions?  It does not even recognize that there is paper in the document feeder.  Prior to this occuring, it used to say "document loaded"...now it says nothing.  I do not even get an error message.  It just does not work.

    Hi @jdm328 ,
    I see that you are having issues with the ADF not recognizing the paper loaded. I would like to help you out today.
    It might be a hardware or paper sensor issue with the printer, not detecting the paper being loaded.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    I have provided a document with steps for cleaning the ADF rollers and the separator pad, to see if that will help.
    'Document feeder mispick' Message Displays on the Control Panel and the ADF Does Not Pick Up Paper o...
    Disregard the title.
    Try to make a copy again.
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. Help

    In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
    I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
    I am running a 64 bit version of Photoshop from the CS6 Masters Collection
    I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
    The document size is 2100 by 1500 Pixels at 300 PPI   only two layers

    In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
    I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
    I am running a 64 bit version of Photoshop from the CS6 Masters Collection
    I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
    The document size is 2100 by 1500 Pixels at 300 PPI   only two layers

Maybe you are looking for