HP Color LaserJet 2550ln printer displaying error massage

I was trying to print a page of tickets (6) containing graphics, but my hp color laserjet 2550ln printer printed a page with the following message:
ERROR: limitcheck
OFFENDING COMMAND: showpage
STACK:
(r)
( Sys / Start )
( Sys / Start )

Found this on the discussion posted 06-03-2010 01:55 PM It worked for me.
I just went through this fix yesterday. I can't remember where I found it on hp.com, though. Here it is:
Turn printer on.
On your printer, press the Menu button
Press 2 (on the fax dial pad)
Press the right arrow (next to Enter button) until you arrive at "High Speed USB.
Press Enter
Press right arrow to select "Off."
Press Enter.
Press Enter again.
Printer will then reboot. I used to get this error occasionally with Windows XP. I wish I would have taken the time to fix this a long time ago!

Similar Messages

HP Color Laserjet 3600n printer displays Install Supplies when supplies are installed

Printer displayed message that supplies were out for all toners except magenta.
We put new black, cyan and yellow toners in the printer but it still displays INSTALL SUPPLIES with questions marks for those three toners on the display screen.
We set the printer to DISABLE CARTRIDGE CHECK mode and requested it print an event log, so the data light turned on steady without blinking and the display says it's printing the event log, but nothing happens for hours.
Took out the three toners (black, cyan and yellow) and kept the printer in DISABLE CARTRIDGE CHECK mode, then was able to print anything requested but prints only have magenta toner on them.
Put a black in the magenta toner slot, still in DISABLE CARTRIDGE CHECK mode, and print only in black where the magenta should be.
Cartridge locks are in good condition. Have cleaned all contacts in the toner slots.
Have checked all connections from DC controller and re-seated the formatter and all appear to be secure and sound.
Any advice as to whether this could be the formatter, DC controller, or something I've not guessed?

Hope you a having a great day,
I am reaching out to probe if you still experience this issue and to make a suggestion. If you are, Perhaps since this is a commercial product, posting in the forum for HP Business Support will provide a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If you are not experiencing this issue any longer you may disregard this post, although I will appreciate if you can take I little bit of your time and let me know.
Best of luck;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Printing PDF to HP Color Laserjet 2550Ln result in Red images

When printing PDF documents to my networked HP Color LaserJet 2550Ln, usually the embedded images are covered in a red hue. This was already the case with MacOSX 10.4, but still continues with Leopard 10.5.2, using Bonjour. Printing the same document (also using Bonjour) via a windows machine (Windows XP SP2) results in a perfect copy.
Anyone an idea of the cause of this behaviour?
Regards,
Gerard

This works for me, because I'm tired of waiting for Adobe to find solutions: open your pdf document with Preview and print from there. It will print cleaner and faster than any Adobe application.

Printing problem with HP Color Laserjet 3000 printer

I am using HP Color Laserjet 3000 printer, it is configured in SAP ECC6 with SPAD with device type "HPLJ4 : HP Laserjet 4 series PCL and access method = L: Print Locally Using LP
At HPUX level printer in configured with proper driver also.
When I print from SAP, I get following error
"Invalid option, Please refer to MAN page for valid options" as attached
Other then above line , nothing else comes
Please help,
Al Mamun

Hi,
Make a try using the device type HKSAPWIN and the access method is front end prinitng.
Also make sure that you are able to take the print out using the os(printer should be configured at os level first).
Regards,
Vamshi.

HP Color LaserJet Pro M252dw Driver Error

HP Color LaserJet Pro M252dw Driver Errors out when laptop is turned off. What is causing the printer to lose it's Print Driver? Windows 64

Hi , Welcome to the HP Forums! I noticed that you are having driver errors with your HP Color LaserJet Pro M252dw, and I am happy to look into this for you! Some questions for you: What is the version of Windows you are using? ie: Windows XP, Vista, 7, 8, 8.1, etc. If you do not know the Operating System you are using, please visit this website. Whatsmyos.What is the exact error message you are seeing?How is the printer connected? Wireless, or USB? If you can take a screenshot of the error that would also help. See this post, How to take and post a screenshot on HP Support Forum, by . In the meantime, please try the HP Print and Scan Doctor, and let me know the outcome! Please see this post, Want Good Answers? Ask Good Questions, by , so you can get the most out of these forums. Once I know more information, I will do some further research for you! Thank you for posting, and hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

HP Color LaserJet CP6015xh panel displays message "Changing Fuser Temperature"

My Color LaserJet CP6015xh printer is displaying this message on the display: "CHANGING FUSER TEMPERATURE"
I can't find this message mentioned anywhere on the Internet, which is strange, because usually any message you see on a printer screen has been mentioned somewhere before. The printer won't print, and I can't figure out what next step I should take. I've tried simply powering off and on again, with no change, still keep getting the message over and over again on the display. Printer is only a few years old and should have a lot of life left on the fuser.
Thanks,
Scott in Penfield NY
This question was solved.
View Solution.

@MisterBubba
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Color Laserjet 4550 49.4c02 error

I am getting a 40.4c02 error on my color laserjet 4550 printer. HP do not seem to support this printer nay longer so I cannot do a firmware upgrade.
Is the printer finished or does anyone have any suggestions on how to solve this problem.
I am printing from windows Xp PC's
thanks
geraldine

HI there I hope youare doing well.
This is a commercial product. I suggest posting in the forum for HP Business Support for a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of luck;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

HT1338 i can't attach my hp color laserjet cp1215 printer.

i can't attach my hp color laserjet cp1215 printer.

Adhvaresh,
"attach" is a word we usually use for plugging in cables - but I don't think that is what you mean.
If you want a driver for that model laserjet, I suggest you use the foo2hp set of drivers. Install Foomatic and ghostscript from here:
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/foomat ic
Then, install foo2HP from:
http://foo2hp.rkkda.com/

HP Color LaserJet 1600 Printer

I really love my HP Color LaserJet 1600 printer but haven't been able to successfully install it in my brand new MacBook Air 1.7 despite several attempts.
I have downloaded the correct Firmware Upgrade 20120928 v2.4 from HP Drivers web page. Unlocked RFU to ON position and installed the firmware. Added HP Color LaserJet 1600 Printer via USB, as required and my MacBook correctly identifies it as such. Though the driver I have chosen is HP Color LaserJet 2605 since the one for 1600 is not available in the database. The printer responds positively during the upgrade but later does not print. I can see the print command being transmitted to the printer but it stays dead.
Please help and let me know stepwise how to do it correctly.

Just upgraded my printer to HP Color LaserJet Pro 200 M251nw.... Problem solved.

Bad photo prints on HP Color LaserJet CP5225dn Printer

Hey all,
Having an issue outputting photos on my new HP Color LaserJet P5225dn printer from Adobe products. Am curious if anyone else might have run across the same issue and possibly found a solution. Here's the background information...
Running Windows 8.1 Pro.
HP Envy Phoenix w/Intel core i7-4770 CPU @ 3.40 GHz
32 GB RAM
2TB Raid 0 HD
NVIDIA GeForce GT 640
Spyder-profiled HP Pavilion 25xi monitors (dual setup)
Running Adobe Creative Cloud (latest builds--issue present in prior versions, too).
Using HP Universal Print Driver PS (latest version--only option on Windows 8), but have tried PCL 4 and 5 drivers as well.
When printing from Adobe products, any photo seems to print without the yellow color. Color swatches and vector files print correctly. This issue seems to only apply to raster images--greens print blue, browns print purple, oranges print magenta. I have had HP support out to examine hardware of printer and everything checks out.
I have tried every combination of ICC profile, paper setting imaginable. Have tried printing as CMYK and RGB. Have reset preferences in Adobe software. Color issues are present in InDesign, Photoshop, and Illustrator, and the images print consistently off in all products (is purple in INDD is also purple in PSD, etc.). I have reset printer to defaults. I have tried removing color management and printing. I have tried printer diagnostics. I have tried having the printer manage color. I have tried having the application manage color. Everything prints consistently wrong.
I've updated video drivers, searched for ICC profiles specific to the printer, recalibrated monitors, no dice. Funny thing is that when you take that same file and send it to another printer, it prints accurately.
Any ideas for troubleshooting are much appreciated. Any solutions would be fantastic.
Matt

Yeah, tried printing from PDF and image issues persist. I'm not sure what's going on if everything checks out from hardware standpoint. Appreciate your suggestions though.
Thumbs up!
Matt Schroeder
Chief Creative Monkey
Big Opposable Thumb
O: (719) 373-1887
M: (719) 761-9672
"Intelligent Design for Evolved Marketing."
Sent from my mobile device. Please excuse brevity and typos.

Hp color LaserJet 3500n printer driver

I just got a new iMac and have marveled at how EASY everything's been ... so far. Of course, Murphy just couldn't resist and I can't get my oldie but goodie hp color LaserJet 3500n printer to print.
I clicked + in the Print & Fax System Preferences. It found the printer. Then, the automatic driver selector chose hp color LaserJet 2.0.2. Well, that didn't work.
I went to the hp site and the driver they have is OLD, but I tried it anyway. No luck.
Any ideas short of a new printer?

Try the three-part hpijs driver from here:
http://www.linuxfoundation.org/en/OpenPrinting/macosx

HP Color LaserJet CP2025 Printing Issue

HP Color LaserJet CP2025 - prints only in B&W - how do I set the printer to print in color?
The latest driver has been installed.

Hi Yahootie,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP Color LaserJet CP1215 Printer drivers location

Where on my hard drive has the ljcP1215-HB-pnp-win32-en.exe file from the HP Color LaserJet CP1215 Printer support page installed the needed drivers?

Hi @zenny ,
I can help you with locating the drivers on the computer.
Here are the instructions for running the Plug and Play drivers.
Click the Download only button and save this file.
Double click on the downloaded file. The self-extracting process will appear.
Click to accept the terms in the license agreement. Click Next.
Driver installation begins. Driver files are pre-installed during this process.
A screen pops up to prompt to connect the USB cable. Insert the USB cable.
Device is connected, waiting for PnP to finish installing driver.
Click Finish to complete software installation.
They extract to the temp folder on the computer.
Press the Windows key and R at the same time, to show the run command line.Type in %temp%. The folder should start with 7z.....
Depending which operating system you are using, I would suggest downloading the Full Feature Software and Drivers if you are still having issues with the Plug and Play drivers.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color LaserJet CP2025 Printer - Vertical Yellow Band printing on every page

For the last several weeks whenever I print from my HP Color LaserJet CP2025 Printer the pages print with a vertical yellow band on the right hand side of each page. I checked the supplies status and it says each ink cartridge has plenty of ink left so I'm at a loss as to what could be causing this yellow band. I'm wondering if it has something to do with the printer's hardware (inside roller perhaps)?
Any insight would be most appreciated.

Hi there cdyson44, Welcome to the Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My HP Color Laserjet CP3525dn printer is only printing parts of my document in colour.

Hi All
I am having a problem with the office HP Color Laserjet CP3525dn printer. I am a novice and the tech guy we use is on holidays! We are using windows 7 with hardwired connection. The problem is that it is only printing some parts of my documents in colour. Some documents are being printed completely in B & W! Any ideas? Thanks

Hi trixie49,
The link below is to the guided troubleshooting utility. Since this is a commercial LaserJet printer you should also post your question to the second link below.
http://h20584.www2.hp.com/hpgt/guides/select?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3690646&lan...
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP Color LaserJet 2550ln printer displaying error massage

Similar Messages

Maybe you are looking for