HP Color LaserJet 2605dn Network Printing

Here we go again. I just upgraded the Windows 7 and I am still having the same network printing issues I encountered in Vista.
1. It doesn't appear that there is a Windows 7 32-bit driver for this printer, am I wrong? I found the drivers page for this printer and it is VERY POORLY written. All I can surmise is that I should install a universal printer driver.
2. The printer is going OFFLINE constantly. This printer is connected directly to my hub with a network cable. I have two other printers on my network, one is a Brother and another is a Canon. I have never ONCE experienced this issue with their printers. They just work like they are supposed to. Why does this continually happen with this HP printer. The only resolution I have found is to delete the printer and add it back. Every two days delete the printer and add it back, uggghhhh. Give me a break, don't you guys test this stuff before you sell it?
As you can see I am not a happy camper.

DaleA wrote:
I'd like to add that the driver provided by HP doesn't allow duplex printing - one of the main reasons I purchased the 2605 printer.  Is there a duplex option available?
Surely, my 2605 is still within its service life.  I would have expected HP to do a better job in the transistion to Windows 7 than throwing out some awful generic driver...
Enable the duplexer as described in the Vista/WIndows 7 Duplex Troubleshooting guide as described here.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC.

    Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC. According to Microsoft Windows Compatibility Center website (http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...) this printer is compatible.
    I have tried everythingto no avail. HP will not support and have, very little online resources addressing this particular issue. What should I do?

    This may help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02538616&lang=en&cc=us
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • LaserJet 2550n network printer on XP host PC, can't install Windows 7 client laptop

    Have Color LaserJet 2550n network printer connected to XP host PC. I can't install  Windows 7 client laptop for printer. The wireless network is fine, I can access documents back and forth, merely the printer doesn't work and there's no way to download 64bit drivers for this printer from HP. 

    Resolved, not solved. 
    I talked to HP product support. The Officejet Pro 8500 A910 will not install on Windows XP (at least the Home Edition) when networked through a router. It will install through USB. I uninstalled the program and reinstalled it with only USB connected to clean out all the network printer/scanner information. Product support claimed it would install through an ether net cable connected between the printer and computer but this does little good if you need internet access.

  • Can't install printer driver: HP Color LaserJet 2605dn drivers "not currently available from the Software Update server"

    I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it.  When I try add the printer I get this message:
    Software for this printer is available from Apple. Would you like to download and install it?
    After clicking Download & Install (the only option other than Cancel), I get this:
    Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
    What's the workaround when Mountain Lion can't find the driver?
    Thanks!

    Sean L. wrote:
    I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it.  When I try add the printer I get this message:
    Software for this printer is available from Apple. Would you like to download and install it?
    After clicking Download & Install (the only option other than Cancel), I get this:
    Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
    What's the workaround when Mountain Lion can't find the driver?
    Thanks!
    The 2605dn has dual Network and USB connectivity. Which are you attempting to configure: Network or attached USB?
    Printer on, and if networked, use a static IP address
    Print & Scan
    IP
    Provide printer static IP address
    Select Printer Software ... HP Color LaserJet 2605dn driver (not sure about that 2600 driver)
    Add
    Configure Driver under Options and Supplies
    I have a 1994 HP Laserjet 4m Plus set up using these steps and the appropriate driver. I just added another network printer, using the same IP address, but using the above 2605dn driver without any issue other than complaint about a redundant IP address.
    Hopefully, you have already sorted this out.

  • Unable to print with HP Color LaserJet 2605dn since Upgrading to Mavericks

    Since upgrading to Mavericks, I've had nothing but problems printing to my HP Color Laserjet 2605dn.
    I'm having this problem on both my iMac and my MacBook Pro.
    I get errors like:
    "unable to write pirnt data broken pipe"
    "unable to send data to printer"
    "printer not connected"
    I've been reading responses to others with similiar issues and I've tried
    deleting and re-adding my printer.
    reseting my printing system
    Installing Guenprint.
    re-adding my pirnter with a generic PCL driver.
    None seem to correct the problem.
    This problem happens both when connected directoy with USB and when connected through the network.
    I have no problem printing with my work (Wondows) laptop.
    Any help would be appreciated.

    Thanks, a brody.
    Yesterday (before I read your response), I downloaded the latest firmware (20140413.) (What do they say about great minds?)
    I thought the issue may have been resolved.
    I was finally able to print my bank statement on both the iMac and MacBook.
    Today, I'm back to the the same issues.
    Very frustrating, even though I've had the printer for five years, I've printed less than 20,000 pages.
    In my mind, it's pointing more and more towards a hardware issue.

  • Color Laserjet 2605dn printer with printing envelopes correctly

    I am having problems with my HP Color Laserjet computer which is not printing envelopes from the computer which has Windows 8.1 installed on it. It will print out letters just fine now, but had problems with that previously, using WordPerfect Suite. The printer is a Color Laserjet 2605dn, which is connected to my home network. The same problem seem to be happening on my mini laptop which is running Windows XP.  I just fixed the printing problem on my windows 7 computer and had to print my envelopes using it. The HP Mini Laptop use to print out my envelopes just fine previously, but have the same problem. On the Pavillion Sleekbook, which is the newest I have the special print software from HP which lets me print paperwork where the others are not using it. I would appreciate any help with this problem. The setup isn't correct and the envelopes don't print out correctly like they did previously.

    Hi semco72057,
    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
    I hope this helps.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Color LaserJet 2605dn for wireless printing, it keeps printing the first page over & over

    When I use my Color LaserJet 2605dn for wireless printing, it keeps printing the first page over & over again.  I have to cancel print job on the printer in order to stop it.   It works properly on the computer that is directly wired to it, but won't on any other computer that I try to print from.   I have had this problem for some time, but now have certain thing that I must print from this printer & can't do it wirelessly.  It doesn't seem to be my network, because I can print from all of the other computers onto other wireless printers I have in the office.
    Any advice would be appreciated!

    Hello,
    Thanks for the post.  I've attached a link below that may assist.  Good Luck!
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • Color LaserJet 2605dn reboots when attempting any report from LCD. Says Printing, then resets.

    HP Color LaserJet 2605dn reboots itself when attempting any report from LCD.  Says Printing, then resets with the green and amber light lit and the LCD screen says Hewlett-Packard.  If I try to send a print job to it from a computer, it says printing, and resets just the same. I've upgraded the firmware to 20071108.  I've rebooted the printer holding down the green and red buttons that didn't help.  I also held down the two gray buttons and powered on which didn't help, it just cleared all my printing stats and cleared my configuration.  I've attempted print jobs via USB, and network with same results.  Admin webpage comes up.  Thanks.

    Hi Pahu,
    Thanks for you reply. Here's some additional information because I'm not quite sure how to resolve the network addressing as you described. The router is set up as a DHCP server, using the standard 192.168.1.1 IP address, and the subnet mask is 255.255.255.0 The starting IP address is 192.168.1.100, and I have it set to allow up to 50 connections. (No particular reason, I think that may have been the default.) The printer is set up to check a variety of connection protocols, starting with DHCP. If that fails, it moves to BOOTP, etc. When I print the network configuraton page from the printer, it tells me the IP address is 169.254.18.32, subnet mask 255.255.0.0, default gateway 169.254.18.32, and the IP is configured by AUTOIP.
    In the past, when it has been working properly, the printer shows an IP address of 192.168.1.10X, usually .100 or .101, but it depends on which device I've powered up first. This is what I would expect, given that the printer should be communicating with the router and be assigned an IP address by DHCP. What I can't figure out is why the printer reverts to its internal default IP address 169.254.18.32, and why this is inaccessible even if I try to designate the printer as an IP printer and type in the printer's IP address.
    Do I need to set the printer to refresh its DHCP lease more often to ensure it doesn't get cut off by the router? How do I make sure the printer stays on the same subnet as the computers if they're all on the same router? Should I assign the printer a static IP address like 192.168.1.100, then set the DHCP range to start at 192.168.1.101? Sorry to ask so many questions, I'm not a network expert and I didn't think this printer would be such a pain to configure.
    Cheers,
    R

  • Windows 2008 Server and HP Color LaserJet 2605dn Driver Issue when Sharing Printer

    I have a HP Color LaserJet 2605dn printer that I need to setup on a Windows 2008 server.  I need the server to act as a Print server, but I have been unable to get any drivers to load other than the 64 Bit Universal drivers.  Because most of the company uses XP (32 and 64 bit), I also need to load those drivers under additional drivers; however, I have been unable to load them, when I point to the INF file (any of the 10 that unzip from the driver package), it says it is not for this printer.  I have even tried the generic 32 bit PS and it says the same thing.  Any ideas on what I am doing incorrectly or where to get the drivers that I need?
    Thanks,
    Gary

    Hello, I have the same problem. For the 2605 Printer is only the universal print driver available. Is seems that HP is to be lazy about making new 2008 driver.

  • HP Color Laserjet 2605dn - won't print in color

    I have an HP Color Laserjet 2605dn printer and recently purchased a new computer with Windows 7.  Our IT dept. installed an updated driver (HP Universal Printing PCCCCL 6) but now my printer will not print in color nor can I find a setting where I can adjust it.
    I also cannot duplex but found helpful post that I will use to try and correct that issue.  If you can help me I would appreciate it.  IT seems to busy to help and my work involves a fair amount of graphics so I need my color.
    Thank you!!!

    This post may be old but someone might use it later.  Right click on the printer and go to properties.  On the General tab go to printing preferences.  (Windows 7- double click printer, click Adjust print options.)  Advanced tab - expand Graphic, under Image Color Management change: ICM method to ICM handled by printer or host system.  Apply and close out the windows.  Run a test print to make sure it works. 

  • HP Color Laserjet 2605dn won't print the red color

    My HP Color Laserjet 2605dn won't print the red color.  It's comes out very light, barely a pink color.  It's not the ink cartridge because it's full and I'm having this problem even when I change cartridges.

    Hello dp146,
    I understand your concerns. Unfortunately, I need to direct you to our Enterprise Business Community Forums.
    This will be the right section to troubleshoot this issue.
    Good luck.
    I worked on behalf of HP.

  • Color LaserJet 2605dn Printing only Black and white

    I have a Color Laserjet 2605dn and all of the color ink cartridges have run dry. However the Black cartridge has over 2,000 pages of ink in it and the printer will not let me prink only Black and White. It seems the color cartridges must also have ink in them in order for the printer to print. Does anyone know a work around so that I can print with the Black Cartridge and not purchase the color cartridges?
    This question was solved.
    View Solution.

    Hello,
    Thanks for the post.  I've attached a link below that may assist.  Good Luck!
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • HP Color LaserJet 2605dn going offline for no apparent reason. Need help!

    There are four of us with these printers in our finance department.  Two PC's are running Windows Vista and two Windows 7.  The printers are networked but installed locally on each PC.  Routinely all of these printers will go offline at the same time and there seems to be nothing that helps.  Our IT's answer is to buy four new printers but these printers work great when they're working.  There has to be a solution to this mystery out there somewhere.  I would appreciate any suggestions.

    Hi JThorne,
    The HP Color LaserJet 2605dn is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
    Here is the link to the Commercial Laserjet board:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • HP Color LaserJet 2605dn prefers Macs over PCs!

    I have an HP Color LaserJet 2605dn on my home network, with two Macs (G5, MacBook) and two PCs running Windows XP Pro. I used Bonjour to set up the LaserJet on the Windows machines. The printer has been working well for the past 4 months until just this past week, when the Windows machines just stopped printing. In the system tray a printer icon appears with a red question mark and a bubble that says "This document failed to print" along with a few more details.
    I've tried the usual (power off and on printer, power cycle DSL modem/router, uninstalling the printers and reinstalling) without success. I've searched the Microsoft and HP forums. In short, I've spent a few hours troubleshooting. The funny thing is that the Macs print fine. My kludge/fix is to set up the G5 to "share" the LaserJet and when I create a new printer on the Windows machines using that ("LaserJet 2605 @ G5") it works.
    Just wondering if anyone else has come across this weirdness.

    I am so glad it helped. I found it while trying to figure out why my Vista box will only print 2/3 of a page then it locks up hopelessly. I managed to finally get my XP box to print today with help from the forums too! If you come across anything about my Vista problem please look for that item and post. I'd really appreciate it!
    ---CJ

  • Please help! New PC with Windows 7, now won't give option for duplex Color Laserjet 2605dn

    Hi everyone,  I'm hoping someone can help.  I have an HP Color Laserjet 2605dn, and after 4 years with a Dell laptop (and Windows XP) I had to get a new computer, this one with Windows 7.  When I plugged in the printer for the first time, it loaded drivers and seemed to work great - EXCEPT there is NO option for duplex printing in the effects or finishing areas.  So I went to the HP website and downloaded the Universal Print Driver, which DOES have duplex, but it won't print to the 2605dn printer!!!
    I am ready to throw this out the window.  I don't recommend buying anything new while you have PMS...hahahaha.  Seriously, if someone could help, my stress level would drop dramatically.  I print a lot, and not doing it duplex would waste so much paper!
    Thanks in advance.

    Enable the duplexer as described in the Vista / Windows 7 Duplex Troubleshooting Guide as follows:  go to Start, Devices and Printers, right click on the printer, Printer properties, Device settings, Installable Options, set the "Duplex unit for 2-sided printing" to installed, OK.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for

  • Free goods failed for reason 3

    Hello Gurus,         I have create inclusive free good condition record with following data,          material : t-atc01          customer: t-s62a01          sales area: 1000/10/00          all free good determination data has been defined        so

  • Safari will not open after install of 10.6

    After the install of 10.6, I opened safari and it sat at the opening page that shows the favourite pages and then quit with a "Safari quit unexpectedly" message. Now on trying to open, I get this same error message. I've removed Safari and tried to d

  • Quick time 7 pro download??

    I purchased Quick time 7 pro twice already now I had to have my computer repaired do i have to buy it a third time? I have the key just can't find where to download it, help please

  • Create a fast refresh materialized view with partitioned primary index

    Hi, I have a materialized view that is based on a table with primary key. I want to create a materialized view with a partitioned primary index . do you have any way of doing it? I tried to create a materialized view with rowid and then I created a p

  • XL Reporter : Can IXR report open in report composer ?

    Hi All expert, i have some ixr file stored in report organizer. But how can i open it in report composer and save as rcr.view ???