HP Color LaserJet 3500n - Slow Printing in Snow Leopard

I've installed all of the HP Printer Updates for Snow Leopard (even manually downloaded the latest entire HP Printer Update), Reset the Printing System and reinstalled all of my printers, but I still continue to have an issues where it takes over 4 minutes for the first page of a print job to print... This is a network printer with an external HP JetDirect (Model #J7942A) box and the slow printing occurs with all Snow Leopard machines. Firmware for both the Printer and the JetDirect box are at the latest versions...
I did notice that Apple's kb article indicates that the latest print driver for this printer is 1.0.2, but my driver indicates 1.0.1... Is the kb article incorrect? Any ideas why I'm not getting the 1.0.2 driver? Suggestions?

I've got the same problem with a Color Laserjet 3550 + JetDirect en3700.
For security reasons, I disabled SNMP v1/v2 on JetDirect. Everythings works fine on Leopard.
I got this problem after upgrading to Snow Leopard (ver. 10.6.2 with HP printer driver 1.0.1).
Looking at network traffic with Wireshark, I've noticed some timeout on SNMP v2 packet directed to the printer.
I've enabled SNMP v1+v2 on JetDirect and now everithings works fine, but security problems related to unsecure SNMP version are now open.
I've upgraded HP printer driver, but I can't find driver version 1.0.2, as mentioned in http://support.apple.com/kb/HT3669#HP.
Any suggestion?

Similar Messages

Hp color LaserJet 3500n printer driver

I just got a new iMac and have marveled at how EASY everything's been ... so far. Of course, Murphy just couldn't resist and I can't get my oldie but goodie hp color LaserJet 3500n printer to print.
I clicked + in the Print & Fax System Preferences. It found the printer. Then, the automatic driver selector chose hp color LaserJet 2.0.2. Well, that didn't work.
I went to the hp site and the driver they have is OLD, but I tried it anyway. No luck.
Any ideas short of a new printer?

Try the three-part hpijs driver from here:
http://www.linuxfoundation.org/en/OpenPrinting/macosx

HP Color laserJet CM1015 MFP printing problem

Till now my HP Color laserJet CM1015 MFP printer was working perfectly and suddenly prints miss aligned colors. Each color prints a little bit below another. I uninstalled printer’s software and reinstalled again but it didn’t help. There is no error messages. Printer’s alignment didn’t help either. Can anyone help me with this problem?
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.

Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.

HP says that the drivers for your all in one print/scanner are downloadable from apple. For the scanner to use preview. image capture or the scan icon from the print driver queue. I don't know how old your HP is, but I know that the newer Os from apple don't support a lot of older printers. You might be able find a third party driver that could work.

HP Color Laserjet CM1015 MFP prints colors looking like 3D while single colors print fine.

HP Color Laserjet CM1015 MFP prints colors looking like 3D while single colors print fine. I have tried several calibrations with no change. I have reset printer to factory default with no success.

Hi AFace; hope you are doing well and sorry to hear that you are having this issue.
Your HP Color Laserjet CM1015 MFP is a commercial product. I will suggest posting and looking in the forum for HP Business Support for a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC.

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC. According to Microsoft Windows Compatibility Center website (http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...) this printer is compatible.
I have tried everythingto no avail. HP will not support and have, very little online resources addressing this particular issue. What should I do?

This may help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02538616&lang=en&cc=us
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Color Laserjet 1600 cannot print in color with Pages 09

Hi, everybody!
I got a huge problem for me that the HP Color Laserjet 1600 cannot print in color with Pages 09 after I upgrade to 10.6.1. It worked very well in 10.5.8. Since there is no official driver from HP website for 1600, so I used foomatic/foo2hp as the driver.
It is very strange that I can print in color with Safari and Preview in 10.6.1, but cannot with Pages 09. When I print with Pages 09, it always shows that the print job was completed but my printer was nothing happened.
I just re-install the 10.6 OS "complete new", install the printer driver with the instructions on this forum.
It would be high appreciated if somebody can help me on it!

Why doesn't MAC just give us the driver for the HP Color Laserjet 1600? It's one of the most popular home based business laserjets. It's the one I use and a lot of other people in business use it so I'm at a loss as to why they don't.
I bought my MAC Pro tower for video editing and I can't print from it and have had to reinstall the OS on it once already because Safari wouldn't open a window. So much for the MAc advertising statement of "We're so much easier to use."
After spending close to $10,000 on MAC equipment, Tower, Laptop, Monitor, etc. if they think I'm going to spend more for a new printer just because I can't get a driver to print they're thinking wrong. I going to re-think my new cell phone purchase too. Has anyone had software issuses with their phones before I go out and buy one?

IMac 3.06 GHz Intel cannot print in Snow Leopard in Text Edit or CS4

iMac/3.06 GHz Intel Core 2 Duo/OSX.6/4gigRAM/1TerabyteHD/CS4 Design Premium/ cheap HP Deskjet D1520 Printer.
I have installed the HP Drivers from the original SnowLeopard install of the iMac, yesterday.
I have downloaded and installed from Apple the HP Drivers for Snow Leopard.
I have downloaded and installed from Apple the HP Drivers for Leopard.
I have rebooted endlessly.
No drivers appear in printer set-up except for my Epson Perfection 1260 Photo Scanner.
Using HP Printer Utility does not recognize any print drivers I have installed in the past two days.
I tried using CUPS from the free source group and this printer is not supported in their list.
My printer worked perfectly in Leopard for printing receipts and memos.
Help!!!!!!!!!!!!!!!!!!!!!!!
John R

Now it's been two weeks since I brought home a 27" iMac and realized that the iMac will not SEE my HP D1520 Deskjet printer any longer.
HP emphatically states that their website driver ffor my printer and for Snow Leopard works in their labs.
Apple emphatically states that the required driver for my HP printer is within the Snow Leopard installer.
And neither vendor will tell me why after repeated installs and uninstalls, and reboots, and permission/disk repair, changing USB cables out, WHY SNOW LEOPARD WILL NOT SEE MY PRINTER, but clearly sees my scanner and an Acrobat driver.
I had another unfortunate soul who's printer is unrecognizable by Snow Leopard to tell me they bought a new printer, and Snow Leopard saw the brand new printer. That's amazing, as my printer is less than a year old. So I guess I have to gamble and buy a new printer because apple upgrades the system and I can't install Leopard which worked perfectly with my printer.
Apple, you let me down, this time.

Why won't Lexmark T430 printer with Snow Leopard?

Lexmark T430 will not printer with Snow Leopard. Error Message: “The printer software was installed incorrectly. Please reinstall the printer’s software or contact the manufacturer for assistance.”
The printer is connected via Ethernet from an iMac; I have an airport wireless network. Oddly, I can print wirelessly from my MacBook Pro, but not from my desktop iMac. Both computers were upgraded to Snow Leopard at the same time, but only the iMac refuses to print.
Tried:
-Reset printing system
-Downloaded Lexmark drivers and reinstalled them
-Connected printer directly to iMac instead of through the Ethernet switch
-Repaired disk permissions
When ‘adding printer’ the Lexmark is recognized and configured, but it only results in the same tired error message.
Suggestions will be appreciated.

Hi,
A follow up on my previous report.
I installed 10.6 on an external USB drive and booted my iMac from there. Result: was able to print successfully to the T430, both via Ethernet and via USB cables. Previously, I also tried to print from the iMac (booted from the internal drive) via USB and that failed; although, as I said, I was able to print to a Canon printer. I conclude that there must be some conflict between the Lexmark drivers and something on my internal iMac hard drive.
H

Epson C88 Won't Print with Snow Leopard

C88 won't print using Snow Leopard. Downloaded driver from Epson doesn't help.????

Like you, I'm working with an Epson C-88+. Happy with this situation, would not be exactly accurate. I have tried some different approaches, including the ones from John and Kappy. They would work just fine for about 3 days, then fail. I even went back to the Snow Leopard Install DVD/ Optional Installs/ Options.MPKG/ Printer Support and made a choice. I then went to Disk First Aid and everything was fine. Today, I went to print 1 envelope, total dismal failure. I then downloaded the EPSON Printer Drivers 2.1, I proceeded to install the drivers. Did anybody notice, this was an Apple License, not an EPSON License? Therefore, there are no assurances, that these print drivers are in fact, EPSON. Therefore, AppleCare should be required to support these Print Drivers as Apple Licensed Products. But equally so, we as 'dumb endusers' must try to work with AppleCare to solve this issue. To "pete.purvis" John and Kappy, sorry, you guys have proven yourselves to be out of the "dumb endusers group, I just want to say, THANK YOU!

Printing in snow leopard with hp Color LaserJet CP1215

I recently bought an iMac, but i've found since i've had it, that there isn't a driver currently available for mac for this HP Color LaserJet CP1215 printer. It's the only printer I have and I love it. I really need to be able to print on it. Could someone let me know if there is a driver that I don't know about, or a way to make it work?

http://ryan.bigwoofs.com/2008/12/getting-an-hp-color-laserjet-cp1215-working-on- a-mac/

HP Color Laserjet 1500L no longer prints with Snow Leopard

When requesting a 'print' the HP Laserjet 1500 accepts the job and the 'green light flicks 3 or 4 times and then nothing happens. A check on the queue reveals nothing - however the completed job shows. It was working perfectly well before I installed Snow Leopard recently. Is there anyone out there with the same problem and is there a patch or fix. I have reinstalled the printer and reinstalled driver. Appreciate any help. Thanks! argieanks

Right the 1500L does not work on my machine either. Although, the printer is on my airport extreme usb port, and is recognized as a Bonjour printer, the OS does not find a driver and will not install the printer. I can print through another computer. Unfortunately, I had to keep Leopard on the other computer just to get at the printer from my computer. I guess I cannot use snow leopard on that machine. This 1500L has been a problem for years. It has never been supported properly, and has given me all sorts of issues. In the early days, it kept dropping off my network, through successive operating systems, and then Leopard worked perfectly, until Snow Leopard, and now we are off again, waiting, waiting. Its my view that if a printer works, it should be kept working, not just dropped off the face of the earth...
Message was edited by: rgmichel
Message was edited by: rgmichel

HP Laserjet 4100 will not print in Snow Leopard

Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
Any suggestions?
Chuck Stewart
< Edited by Host >

Well, another week has gone by without a solution.
Again, here is the problem:
I have a 24" iMac connected to a USB hub and an AT&T 2-Wire DSL/ethernet hub. When I upgraded to Snow Leopard 10.6.1 and now the update 10.6.2, the two printers on the USB hub work fine but the HP Laserjet 4100dtn does not print. This old printer has only ethernet or serial ports. I've downloaded and installed the HP driver updates from Apple and HP to no avail. According to HP, I must add the 4100 manually using its IP. I've followed the instructions while adding a printer to select IP- HP Jetdirect - Socket. The address of the printer is 10.0.1.100. When I type this in, the window says that this is a valid and complete address. It searches and then says the "Print Using:" is a Generic PostScript Printer. The driver for this printer, I believe, should be "HP LaserJet 4100 Series v.3010.107" Regardless, when I click Add the window "Determining Installable Options" shows "Status: Connecting to printer..." It never establishes a connection.
The 2-Wire DSL/Ethernet Hub/Modem, has an IP of 192.1687.1.66, Submask 255.255.255.0 and Router (DNS) 192.168.1.254.
If I plug the ethernet cable directly from the printer to the iMac, the supply level shows correctly but will not print. If I plug the ethernet cable from the printer to the 2-Wire and then to the iMac, it neither shows supply level nor prints.
Any suggestion as to how to fix this problem? (I've been on the phone with 3 different Apple respresentatives and 1 HP representative with no success.)

My HP Color Laserjet CP1215 only prints when sending a command from a distant computer (shared pr.)

My HP Color Laserjet CP1215 won't print when I send a print command from the computer to which the printer is connected to. The printer is shared. When my colleague sends a print command from another computer, the printer does his job.

I am currently in the same boat. I love how you posted this legitimate issue 3 years ago and there is still no resolution. It really reflects on the company's character and attitude toward their customers.
Hopefully this will get a response.

HP Color LaserJet 2600n quit printing on an XP machine

Even though my HP Color LaserJet 2600n shows "ready" on my XP control panel screen for printers, it just quit communicating with my XP system. I have it connected via an Apple Time Machine and found it easy to connect to the printer from any computer in the house (desktops, laptop, netbook, Apple). It worked fine for a long time but now I can't get my XP system to connect to the 2600n. Anyone have a suggestion on what I should do to regain the ability to print to this printer from my XP desktop? Thanks in advance.
PS - Although I know this sounds wrong, I didn't install any new software or make any other changes to my system. It was printing fine yesterday and today - nothing! I've rebooted the PC and the printer. There are no error messages on the printer - it simply says "Ready". What am I missing?

Download and run this on the XP machine. I suspect a security system update or change, but let's let the utility tell us.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Color LaserJet 3500n - Slow Printing in Snow Leopard

Similar Messages

Maybe you are looking for