HP Color Laserjet 4520 not switching automatically to Tray 1

Hi,
I have a strange tray issue with a HP Laserjet 4520.
If a sheet of paper is put into tray 1 (manual feed), the printer still take tray 2 for printing.
It only prints from tray 1 when its manualy selected in the printer properties...
Its very weird, since i worked fine until 2 or 3 month ago.....Nothing has been changed in the config...
I tried different drivers...PCL 5...PCL 6...Printer Bios Update...nothing helps...
How can i solve this issue ?
Thanks for your help

Hello JackSlater,
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Similar Messages

After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

Have you tried changing the order in Network Preferences pane?
Open System Preferences/Networks/Click the gear symbol under the service list. Select set service order then drag. If your wifi is above the ethernet move the ethernet to the top. Click ok. Click apply (bottom left) and test.
Hope this helps
PJRS

My Color LaserJet will not print in color

Hi, I have a HP Color LaserJet CP1518ni
It has been working perfectly fine with my computer until now.
I am using a Windows Vista 32-bit
I just tried to print something on here, but it automatically prints in black and white.
I tried looking in the preferences, but I can't find any options to switch it back to color.
I tried it with another computer in the house, and it worked fine there, so it just seems to be this computer.
Please let me know, thanks.

Hi there gracekpm,
Try downloading and running the print and scan doctor located here to identify any software problems:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on. Lets us know the results.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Color LaserJet 3600(not 3600n) with Fast Ethernet port - can I use it?

Hello! There is a HP Color LaserJet 3600 in our company connected via USB with XP-based PC. Recently I decided that we need this printer be shared directly trough our ethernet network, so I started to learn manuals - its own manual, Jet Direct, and all that stuff. The printer's manual says that HP Color Laserjet 3600 does not have neither its own ethernet port, nor support for embedded print-server like JetDirect 620n.
But!
Visual check shows that this HP 3600 DOES have its own ethernet port and if I connect it to network or at least to a notebook - it blinks like any other ethernet port with "lights" should do.
However.
Neither front panel, nor back panel says anything about network support(like letter "n" in model name).
Configuration page print also does not know about that mysterious port.
So my questions are:
1. What is this port actually?
2. Can I use it to share printer over network? Maybe, there is a way to upload 3600n's firmware somehow?

The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
You can also find the article pertaining to this product here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
(contains basic troubleshooting info, manuals, drivers, etc)
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

HP Color LaserJet CP1514n Printer paper jam in tray 2 - How to clear same?

HP Color LaserJet CP1514n Printer
A page was torn in printing. Message: Clear jam in tray 2.
Have been trying to do just that for over 2 hours.
Any hint?

Lets try the following:
You will need access to both front and back of printer
Power off and unplug printer
After printer has cooled down (nothing is hot inside printer), slide out bottom tray
Slide out print cartridge tray. No need to remove cartridges. Be careful not to touch bottom of cartridges.
Open back of printer. Back door is opened by pulling back/away from device using notch at top. Should pop open with little effort.
From back of printer, with flashlight/Smartphone, look for jammed paper.
Be careful for edges. Not a lot of space.
Hope this help you find jammed paper.
I work for HP

Hp Color laserjet 3500 not work - help wated

My printer laserjet 3500 has been out of work for a week.
It tell these;
1. Open lower rear door. Fuser is Hot. Press both sides of fuser to ensure it is fully seated.
2. Close the door. Turn off printer then turn on. If errors reappears, record message and cotact suppor.
I keep doing per suggestion, but out come still the same. I rang Hp service support, the guy asked me to send e-mail. I could not find support e-mail address but reach this board. Can any Hp-technician support help me out? Please.
Question:
a) Does the printer need repair?
b) Estimated cost.
Thanks
Mama

@dwropp
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

HP Color Laserjet 4550 not recognized by Mavericks.

Okay folks, yeah, I know, it is an older printer. But, it's a work horse in excellent condition that gets the job done. The printer is Wi-Fi and also can do ethernet. Mavericks will not recognize either now to print.
I finally made the jump from Leopard 10.5.8 to Mavericks 10.9.2. Yes, I'm regretting it but had no choice since I needed to connect the phones and iPad to the MacBook Pro (mid '09). I never had any problems until I upgraded to Mavericks. Ugh.
Although HP and Apple say that the original driver should be okay, nope. So I found the updated driver and installed it. Nothing. I tried with JetDirect and IPP. Blank. It's like I have no printer and worse yet, no drop down list. Shall I say I am beyond livid? (Don't even get me started on other programs like my Adobe Creative Suite that it will not accept or my Outlook that I had to rebuild 2x since "upgrading" the OS a week ago!). I did try the eprintcenter.com for HP but there is no printer key code for it to work.
So now, I turn to the folks here as my saving grace. With the exception of having to buy a new printer which is out of the question at this point in time, how did anyone else fix this Mavericks mess?

"Not recognized" doesn't really explain exactly when/where you have a problem. What drop down list are you referring to?
Install this driver download:
http://support.apple.com/kb/DL907
Now, reset the printing system.
http://support.apple.com/kb/PH14141
Now Add the printer using IP address and HP Jetdirect protocol.
If the correct driver doesn't show up, you can try generic HP PCL 5.
(Please respond with exact results/error messages if you want more help.)

Color Laserjet 4700dn not printing after update to Yosemite

Hi.
I updated my Mac to OSX Yosemite. My printer stopped working. Where can I find the right printer driver?

Hello @Paul_en_Mar , and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial LaserJet Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Apple TV 2 does not switch automatically the video resolution (60 HZ / 50 HZ)

My apple TV streams the content from a Mac Mini. In my iTunes library are mixed content from the iTunes store. Some are 24 fps with 60 Hz and some are 25 fps with 50 HZ. All was bought on iTunes. The video resolution is set on my Apple TV to AUTO. This mens for me that my Apple TV will change the resolution by itself depending on the movie.
And this is the problem. The Apple TV does not change the resolution. It is only on 60 Hz. A lot of people has the same problem. My iPad wokrs fine and displays all movies correct.

Thank you for the eplanation. What might cause that activity as the TV was off and no other HDMI was on? Only WiFi was available but nothing connecting to the apple TV.... I tried to "wake it up" with iTunes on my macbook - and it works (I was not aware of). But it could not be iTunes and it was not really "used". So it might be iPhone or iPod waking it without we want it to.
I'll check all items potentially connecting to it. Txs!

Satelite L750 does not switch to headphone automatically

I was messing around with the audio on the laptop, and now when i plug in a headphone into the jack socket the laptop will not switch automatically to the new output device.
The only way i have found out to switch it was to change it to the default audio, but i have to switch it back when I'm finished.
Is there anyway for it to switch when it discovers that a new output audio device is discovered.
Thanks dan

Could this thread be useful?
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=256895
Go to control panel -> Realtek HD audio Manger
In the top right corner, there's a little yellow folder called "Connector Settings.
There, you can find setting "Enable pop-up dialog, when device is plugged in.
Plug in an headphones and select the option "headphone". Then the sound comes out only through the headphones

Automatic Duplex Printing not working on HP Color LaserJet 3600DN in Windows 7. It worked before.

I have an HP color laserjet 3600 DN on Windows 7. This computer came w/ Windows Vista and a 3600DN driver was installed and the computer was upgraded to Windows 7. The printer did automatic duplex printing.
At one point, my computer indicated that it could no longer find the printer. In an effort to solve this problem, I uninstalled the printer. When I tried to reinstall the printer the computer could not find the driver. At that point I tried to download a windows 7 CLJ 3600 DN driver. Since HP doesn't provide this driver for Windows 7, I tried to download the Windows Vista driver for 3600DN.
However, when I go to the appropriate webpage by following the links, only drivers for Color Laserjet 3600 are listed (no 3600DN drivers).
As far we can tell it only allows Manual Duplex printing (no automatic duplex printing). Clicking the "Two Sided Duplex Printing" option is there but only works when the "print on both sides (Manual)" is set on the Finishing page. If manual is turned off, then it becomes single sided.
Can I get a driver that will allow me to do automatic duplex printing on on my HP CLJ 3600 DN using Windows 7?

How did you replave the duplex belt? How to deassemble the backside of a officejet and click the new belt on? I can't see nor do it y self

HP Color LaserJet CP1217 is not detected by PC

Hi
I have a HP Color LaserJet CP1217 which I am trying to connect by USB to a new computer running Windows 8.
When I first plugged the printer in the drivers were automatically detected and downloaded, and the printer was working.
I then moved the printer to a different PC for another printing job. Also worked fine.
When I brought the printer back to the new computer, the printing jobs were just getting stuck in the queue with an undescriptive error message.
I tried various combinations of restarting the PC, uninstalling drivers, re-installing drivers, updating drivers, turning printer on and off, using the HP print and scan doctor.
Using the HP print and scan doctor I am getting a message that the printer is not connected - though the USB cable is plugged in. I have tried different USB ports and a different USB wire but still the pc will not detect the printer.
These same cables work fine when I try the printer with another computer so it is obviously some other issue.
As the printer is more than five years old HP will not help over the phone. They recommend we buy a new one. But this one was working a few days ago!
Help please.

Hi
Yes other USB devices work (USB drive,keyboard etc).
Initially there was an error in the printing dialogue box but just said "error" with no other details.
Since un-installing drivers and re-installing, no printer is detected, only the printer driver. The printer is on and plugged in. When I go to devices and printers and run 'add printer' command it does a search and comes up with nothing.
Running windows 8.1, 64 bit.

HP Color LaserJet Pro MFP M177fw Not working with Fedora 14

Our ERP is compactible up to Fedora 14. But I newly purchased Printer(
HP Color LaserJet Pro MFP M177fw) is not working with this OS.
Give me a urgent solution

Hi @HealthITLadyRed,
I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
I have provided some steps to try to see if we can resolve this issue.
Check and remove any packaging material inside the printer and toner.
Disconnect the USB/Network/FAX and power the printer on Standalone.
Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
Update the printer's firmware by a USB connection. Software and Drivers.
Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
I can send a private message with another step to try.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet/Wireless)
What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
Is this a new printer?
If you appreciate my efforts, please click the Thumbs up button below.
If there is anything else I can help you with, just let me know. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color LaserJet CP1520nw will not connect to network (time out repeatedly)

My HP LaserJet CP1520nw won't connet to my wireless router upon installation, no many how many times I've been asked to connect it to the computer via a USB printer cable. I uninstalled and reinstalled all software, and each time I try to set it up for wireless connectivity by connecting my computer and the printer via a USB printer cable, it gets to 99% installed on the progress bar and sits there until it times out. I suspect one of the follow but am open to other ideas from those more knowledgeable:
1. Is the printer locked onto some old, initial configuration from a previous wireless network that needs to be purged of addresses, etc. before it can accept the new ones?
2. Could my WPA WPA2 PSK AES encrytion be messing it up? Are the modern firmware and updates designed to accept these ? I never have gotten to a screen where it asks for my encyption key or even a WPS pass phrase. What to do if so?
3. Could Church Lady be correct and that it is Satan preventing the installation? If so, what icons does he use to watch out for and will my Norton anti-virus and malware quarantine him to Hell automatically or does it require manual enforcement?

Hi @Marvalina1968,
Welcome to the HP Forums!
I noticed that your HP Color LaserJet CP1520nw will not connect to network with Windows 7. I am sorry to hear this, but happy to help!
First to answer your questions:
It is possible the printer could be locked to an old configuration and needs to be reset.
I don't think your WPA WPA2 PSK AES encrytion could be messing it up, unless you got some really strange characters in your password.
Your Norton antivirus, could possible be causing the installation to fail.
Please take a look through the following guides:
'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
Printer Does Not Maintain Wireless Connection.
If the guides do not resolve the issue, please try the following:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. Disable antivirus software.
Disable any firewall programs. Turn Windows Firewall on or off.
Re-install the software. HP LaserJet Full Feature Software and Driver.
Hope this solves your problem, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Software for HP Color LaserJet CM1312nfi MFP is not currently available from the Software Update server.

I recently upgraded to Mountain Lion, and found that I could no longer print to my HP CM1312nfi.
This is usually a problem with HP at every upgrade, but this time, they appear to have offloaded the driver download process to Apple.
My printer is connected wirelessly through a time capsule by IP address—the physical, not the virtual, e.g: 169.254.xx.xx instead of 10.0.1.x.
When I try to download the driver by bonjour or IP, I get the following error message:
Can't install the software for the Hewlett-Packard HP Color LaserJet CM1312nfi MFP because it is not currently available from the Software Update server.
Is this truly a Software Update server error, and if so, any clue when it will be resolved?
I am able to print with the generic driver as of now, but fax and scan capabilites are gone. The add fax dialog lists no devices.
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?
Thanks for your time and attention.

Of course, once I posted this, I tried again and downloaded the driver without issue.
My second question still stands, however:
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?

HP Color Laserjet 4520 not switching automatically to Tray 1

Similar Messages

Maybe you are looking for