HP Color Laserjet 4700DTN for Network supporting Windows 7 (32 and 64) and Windows 8 (64) OS

All, new to the board. I am installing my Printer on the network, but need to gain all of the functionality it can give on the subject OS systems. Which driver(s) are appropriate? I am not that well versed in the options. Thanks for all the help!
Adam.

Hi,
Universal for the whole 4700 series should work. Please download from the following link and install on your Windows 7 machine.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=473039&locale=en_US&tas...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Driver for HP Color LaserJet CP2025 for Windows 7 64 bit

I just purchased an HP Color LaserJet CP2025 for my computer running Windows 7, 64 bit as an OS. The driver disk does not include that OS and the Driver Support page does not specify which driver to use in order to take full advantage of the automatic two sided color printing capability. Any help out there?

I am having the same problem! Please share if you find an answer.

Can you tell me if you have drivers for color laserjet 2605dn for windows 7, and a easy way to downl

Drivers requires, color laserjet 2605DN for windows 7 64 bit

You can find all available software for that printer here.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1140731&...
I hope you found this link helpful.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Color LaserJet 2605dn for wireless printing, it keeps printing the first page over & over

When I use my Color LaserJet 2605dn for wireless printing, it keeps printing the first page over & over again. I have to cancel print job on the printer in order to stop it. It works properly on the computer that is directly wired to it, but won't on any other computer that I try to print from. I have had this problem for some time, but now have certain thing that I must print from this printer & can't do it wirelessly. It doesn't seem to be my network, because I can print from all of the other computers onto other wireless printers I have in the office.
Any advice would be appreciated!

Hello,
Thanks for the post. I've attached a link below that may assist. Good Luck!
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Recently bought 4S, it keeps searching for network, reads invalid SIM, keeps searching for network, have switched the handset on and off several times, have tried 2 new micro chips, re set the network too ! nothing seems to be working !!! Iam in Delhi

recently bought 4S, it keeps searching for network, reads invalid SIM, keeps searching for network, have switched the handset on and off several times, have tried 2 new micro chips, re set the network too ! nothing seems to be working !!! Iam in Delhi

Obvious question... where did you buy your 4S and is factory unlocked?

HP Color laserjet CP3505n loses network connections

My HP Color Laserjet CP3505n used to print flawlessly from 2 computers wired on my network. Now sometimes it says connected, but hangs up when trying to print. Or sometimes it says OFFLINE. Either way, I end up with a queue waiting to print and nothing happens. If I turn off the printer then turn it back on, it will bring the queue, but only will recognize the network for a minute or two. I have a Verizon GT704WGB wireless router, but all of my other network devices work perfectly.

Try here
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/6520-Photosmart-Wireless-Problems/td-p/...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I need a print driver for the HP Color LaserJet 3600 for OS X 10.8.3

Now that I have updated to the newest OS I'm frustrated because neither Hewlett Packard nor Apple has a driver for the printers that I have. So I can't print from my laptop to any of my printers. I just need a driver option for and HP Color LaserJet 3600, Canon MF5900 Series, and a Hewlett Packard CP1518.

Information/possible solution:
Printer Setup
https://discussions.apple.com/message/4367330#4367330
HPIJS for Mac OS X
Gimp - Print

HP Color LaserJet Pro MFP M177fw screen frozen on hp logo and energy star icon

My HP Color LaserJet Pro MFP M177fw screen is frozen on hp logo and energy star icon. It has only printed the test page, and will not print otherwise. I have tried unplugging for 60 seconds, and even uninstalled it and reinstalled it with the latest download - still no change. None of the other icons outside the screen work either (home, help, etc.) about all i can do is turn it off and on. Also, I obviously cannot make copies etc since I cannot access any of the functions. Please help! and thanks in advance!

Hi , I read your post and see that the printer is frozen on the HP Logo and Energy Star Icon. I would really like to be able to help you resolve this issue.
I have provided some steps to try to see if we can resolve this issue. Disconnect the USB/Network/FAX and power the printer on Standalone. Check and remove any packaging material inside the printer and toner. Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation. If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord. Update the printer's firmware, make sure you run this through a USB connection. It may not detect the printer in this error state though. Software and Drivers. Select Option 2 and wait for the page to load and then select the link for firmware. I can send a private message with some another step to try.
In the forum beside your handle name just click on the envelope to view it. How is the printer connected? (USB/Ethernet/Wireless) Please let me know the outcome. Have a nice day!
Thank You.

Sun ONE Directory SDK for C support on RHAs 4.0 and Win 2003 R2

What version of Sun One Directory SDK supported on RHAS 4.0 and Windows 2003 R2.
Please confirm.
Thanks,
Rahul

The C-SDK that will come with Directory Server Enterprise Edition 6 will support both RH AS 4 and Windows 2003.
But for today, I would say that the version in mozilla.org does support them.
We are currently contributing all of our changes, bug fixes and improvements to Mozilla.org and future versions of the Sun C-SDK will be directly built from Mozilla.org sources.
Ludovic.

Which mac book is convenient for network engineers mainly working on installing and designing network and call centers???

i need some help picking the suitable machine for network architect and installation engineers , will the mac air with 2.0 processor and 8 Gb RAM do the job, or mac pro is the best option ?

I would stop down to an Apple store and speak to several of the folks there.

Windows 7 computers asking for network password to access shared files and printers on Windows XP PRO computer.

I have a network of 10 computers configured as peer-to-peer work group. I have upgraded one of the ten from Windows XP PRO to Windows 7 PRO. The other nine computers are all running XP PRO. AS near as I can tell they are all configured the same. I have the
same user and same passwords on all computers. One of XP computers is used as a print server. The Windows 7 computer initially was able to access shared files and printers on all XP machines with out requesting a network password.
Suddenly, the Win 7 computer began requesting a network password to access the shared files and printers on the XP print server. It will not accept any of the user names or passwords (all administrators on both machines with identical names and passwords.)
The Win 7 computer has no problem accessing the shared files on the other XP machines. It can even access shared printers in a different work group. Apparently something has changed but I'm at my wits end trying to figure what changed on either the Windows
7 machine or the print server XP machine.
I would appreciate any help. Thank you

Hi,
Based on my research, I would like to suggest the following:
1.
Disable simple file sharing on the Windows XP computer:
How to disable simple file sharing and how to set
permissions on a shared folder in Windows XP
2.
On the Windows 7 computer, go to “Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings” and ensure that the
following items are turned ON:
Network Discovery
File and printer sharing
And this one is OFF:
Password protected sharing
3.
Temporarily disable or remove all the security software (firewall, anti-virus, anti-spyware, etc.) on the computers and check if it works.
In addition,
I would like to share the following with you for your reference:
Troubleshoot file and printer
sharing
Hope this helps. Thanks.
Nicholas Li - MSFT

Is there a way for network mounts NOT to open up with windows at startup?

I have dragged several network volumes in the startup pane of my account in system preferences - so that when my computer starts up it automatically connects to various computers on the network and they mount on my desktop.
However, each network volume opens a window, so after they have all mounted, I end up with 5 windows on my desktop.
For a while now I've just been closing each window, but I want to know if there is a way for the network volumes to mount without new windows opening.
I've tried checking the "hide" option in the startup pane and that didn't work.

Thanks Niel, I don't know how to use applescript - so I have a few clarifying questions.
1) I'm not sure what to write to specify the network volume name. So instead of "close every window", should I type, "close network volume 1 window, network volume 2 window, network volume 3 window" (substituting "network volume..." for the actual name)?
2) Also for the delay, I assume the number 3 represent seconds - so does this mean if I type "delay 30" it will close all or specified windows after 30 seconds after startup? Would I put "delay 30" after "close every window"?
Thanks in advance.

HP Color LaserJet 4700dtn. Won't Print from printer queue.Event Code 68 8002

From the start of using this printer about a year ago I normally just plug in the usb wire from the laptop and it works.
For some reason about 3 weeks ago it seems to have stopped receiving data from the computer . A different wire to the printer will not work. but the same wire connected to a different printer on same laptop port does work.
I have tried discovering the printer using the HP support system to try an update the driver/firmware. The printer is discovered but the update seems to end up in th printer queue and gets stuck.
The queue is empty at the moment.
My normal printer repair company say its a software problem.
The printer will print its own diagnostics pages but to be honest I don't have a clue what the info printed off means or if there are any answers to be found there.
Anyone any ideas please. ( answers in "printers for dummies" speak if at all poss please)

Hi,
Please follow in the link below :
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Color Laserjet 4650 printing first page of any doc over and over

Hey folks,
If I or some of my colleagues send a doc to the network printer, it prints the first page over and over until you go and force it to stop. This is taking place on at least one PC and one Mac; others have printed from both platforms without problem. It seems to happen in any kind of software - MS Office, web pages, etc.
Rebooting the printer has no effect.
Thanks in advance for any help!

Here is what you need to do. On the printer go to the diagnostics menu and then choose the pq troubleshooting and select. The printer will print a number of pages including 4 sheets of solid fill color i for each color. This is where you will see the missing color and most times it is only 1 toner that is having an issue. This does not mean that particular toner is bad as it could be a bad slot. To find out you need to go to the same diagnostics menu and then scroll down to disable cartridge check and select. When the printer says ready, diagnostics mode, open the toner door and remove all the toners. Now I will give you some examples of what to do next. Let say the Cyan toner only prints on half the page. You will want to take the black toner cartridge and place it in the cyan slot. Close the door and run the same test pages again. Most will be blank, but you should get 1 page of solid fill black. If the page is ok unlike the cyan page, then the issue is the cyan toner. If the page has the same problem as the cyan page, then the slot has an issue and most likely the laser/scanner lens are dusted over. Sometimes you can lift the shutter in the back of the toner cavity for that color and use a qtip to clean the lens. Most times the laser/scanner assembly need to be removed from the printer which is not easy and then the optics cleaned.

Can GarageBand for ipad support wav files, soundfonts files and midi files?

I would like to add more sounds to GarageBand, can I download them straight to my ipad?

There are a lot of apps that support PDFs e.g. the free iBooks app and GoodReader . In terms of Word docs some of the most popular apps are Apple's Pages app, and third-party apps such as Documents To Go and Quick Office HD.
If you are wanting to do a lot of typing on it then you'll probably need an external keyboard (Apple do some bluetooth ones) rather than typing on the screen - also the 'word' apps won't be as powerful as the 'office' type programs that you get on PCs/Macs, but for straightforward word processing you should be ok.

HP Color Laserjet 4700DTN for Network supporting Windows 7 (32 and 64) and Windows 8 (64) OS

Similar Messages

Maybe you are looking for