HP Color laserJet CM1015 MFP printing problem

Till now my HP Color laserJet CM1015 MFP printer was working perfectly and suddenly prints miss aligned colors. Each color prints a little bit below another. I uninstalled printer’s software and reinstalled again but it didn’t help. There is no error messages. Printer’s alignment didn’t help either. Can anyone help me with this problem?
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Similar Messages

  • HP Color Laserjet CM1015 MFP prints colors looking like 3D while single colors print fine.

    HP Color Laserjet CM1015 MFP prints colors looking like 3D while single colors print fine.  I have tried several calibrations with no change.  I have reset printer to factory default with no success. 

    Hi AFace; hope you are doing well and sorry to hear that you are having this issue.  
    Your HP Color Laserjet CM1015 MFP is a commercial product. I will suggest posting and looking in the forum for HP Business Support for a better chance at finding a prompt solution.
    You may find the commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Thanks;
    RobertoR
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Color LaserJet CM1015 mfp photo printing problem

    I am running a Color LaserJet CM1015 mfp utilizing only HP print cartridges and HP Color Laser Photo Paper, glossy, yet I cannot seem to get a decent photo to print.  There is always a black smear or two on the front of the printed page.  It prints black and white and color just fine on plain paper but I cannot get a decent print on glossy.  This has happened since day one so I don't think it's a dirty print roller,,etc. issue.
    Thanks for any ideas!
    Michael 

    Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
    Inkjet and Laser Printer Supplies
    Printer Cartridge Recycling
    http://www.cartridgeshop.com.au

  • Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions.  I downloaded the most recent driver! Any help would be appreciated.

    Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions.  I downloaded the most recent driver! Any help would be appreciated.

    HP says that the drivers for your all in one print/scanner are downloadable from apple. For the scanner to use preview. image capture or the scan icon from the print driver queue.  I don't know how old your HP is, but I know that the newer Os from apple don't support a lot of older printers. You might be able find a third party driver that could work.

  • How to print from iphone to hp color laserjet CM1017 MFP printer

    How to print from iphone to hp color laserjet CM1017 MFP printer

    In order to AirPrint from your iPad/iPhone, here's all you need to do:
    1. Make sure the printer and iPad/iPhone are connected to the same local network.
    2. Open something you want to print (on the iPad/iPhone).
    3. On the iPad/iPhone, tap the "Action" button (arrow curving out of a box).
    4. Tap "Print".
    If you have any issues with printing, below are some steps that should help you out!
    1. Power off the printer.
    2. Completely power off the iOS devices (hold the Sleep and Home buttons simultaneously until a message appears asking you to "Slide to power off". Slide across that bar, and it should completely power off).
    3. Power the printer back on.
    4. Power the iOS devices back on.
    5. Try to print again.
    Those steps usually resolve the issue. If they do not, try this additional steps:
    6. Power cycle your router (usually done by unplugging the router’s power cord, waiting 20 seconds, and plugging it back in).
    7. Make sure that the iOS devices and the printer are all connected to the same network, then try to print.
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • HP Color LaserJet CM1015 MFP Working?

    Does anyone have the cm1015 mfp working with leopard?? Does scanning work correctly with HP Director? I wonder why none of these new printers work with 10.3 but not 10.5. Thanks

    Hi there
    I found a new version of the HP printer software package for cm1015/1017 printers on the HP website. Installing at this moment.
    I'm looking forward that this will work on leopard ("system requirements: osX 10.5")!
    Happy testing.
    link: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=1846081&prodTypeId=18972&prodSeriesId=1846080&swLang=18&taskId=135&s wEnvOID=219
    scroll down and choose the bundle released at 14 january.

  • Windows 7 64-bit & HP LaserJet M1005 MFP Printing problem

    I have installed the latest available drivers (as of 26rd October 09) for HP LJ M1005 MFP printer
    on Windows 7 64-bit Enterprise. Printer connected over USB.
    I can't print more than two pages from any application.
    It stop printing after two pages and have a message on LED "Printing Document".
    Nothing is in the print queue.
    Printer well working on WinXP, Win2003, Win2008 x64.
    Anyone else have this problem? Or even a solution?
    Sorry for my bad English.

    I retried the installation from the driver after having cleaned previous installation and having unplugged the printer.
    Same problem re-occured
    Here the log containing the error
     EDC): _PostProgressMessage hWnd=0x60206 msg=1125, param=13074
    [11-19-2009 8:22:39:391]- LOG(EDC): Preinstalling inf C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
    [11-19-2009 8:22:39:391]- LOG(820): IDLCProgressDlg:nCurrentProgressMsg()
    [11-19-2009 8:22:39:391]- LOG(820): msg=Preinstalling the driver files ...
    [11-19-2009 8:22:41:216]- LOG(EDC): SetupCopyOEMInf failed gle=2
    [11-19-2009 8:22:41:216]- LOG(EDC): PreInstallDriverFiles()
    [11-19-2009 8:22:41:216]- LOG(EDC): _PreInstallDriverFiles()
    [11-19-2009 8:22:41:216]- LOG(EDC): inf:C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
    [11-19-2009 8:22:42:761]- LOG(EDC): DriverPackagePreinstall = -536870141, flags=0x14
    [11-19-2009 8:22:42:761]- LOG(EDC): ===>>> ERROR (gle=-2146499837, 0xe0000303): Msg: (null) Context: DriverPackagePreinstall failed
    [11-19-2009 8:22:43:775]- LOG(EDC): _PreInstallDriverFiles()
    [11-19-2009 8:22:43:775]- LOG(EDC): inf:C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
    [11-19-2009 8:22:45:194]- LOG(EDC): DriverPackagePreinstall = -536870141, flags=0x14
    [11-19-2009 8:22:45:194]- LOG(EDC): ===>>> ERROR (gle=-2146499837, 0xe0000303): Msg: (null) Context: DriverPackagePreinstall failed
    [11-19-2009 8:22:45:194]- LOG(EDC): Diffx Preinstall FAILED, trying SetupCopyOEMInf: C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
    [11-19-2009 8:22:45:194]- LOG(EDC): ProcessFailure(3) NEXT=0, BACK=1, CANCELED=2, FAILED=3
    [11-19-2009 8:22:45:194]- LOG(EDC): _PostProgressMessage hWnd=0x60206 msg=1129, param=0
    [11-19-2009 8:22:45:210]- LOG(EDC): InstallSequencer() step = 4
    [11-19-2009 8:22:45:210]- LOG(820): IDLCProgressDlg:nStopCurrentProgress()
    [11-19-2009 8:22:45:210]- LOG(EDC): --- PreInstallStep ---
    After that he retries to install the driver, but inside the previous install directory.

  • Insanity when printing on HP Color Laserjet CM1015 MFP

    I've bought the Hewlett-Packard Laserjet 1015 a couple of days ago. When printed from the Acrobat Reader 8.1.2, some documents are printed with some criptical fonts instead of letters( totally unreadable ). "Print As Image" from Advanced Settings works, but is not a real option for me. The same files were printed without any problems on my old HP ColorJet 815. Has anybody encountered this problem already?

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Blue vertical streak on papers hp color laserjet cm1015 mfp

    Recently my printer has printed 2 blue vertical streaks on documents I print.  I checked the supply levels and there is still about 45% of the ink left for all the toner colors.  I tried using the cleaning mode, but it didn't help the problem.  If somebody could help me with my problem it would be greatly appreciated.  Thank you!

    Nobody has experianced this?

  • Hp color laserjet Cm3530fs mfp

    hp color laserjet Cm3530fs mfp printer.  Can I pull a fax from the fax log from a few days ago and reprint the fax in full?
    Help please.

    Hello arthur123,
    Welcome to the HP Forums.
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Color LaserJet Pro MFP M176n installed but not printing

    Hello Everyone,
    I have problem with my printer Color LaserJet Pro MFP M176n.
    at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
    Please help......
    - Windows is windows XP 32bit
    - Printer name   Color LaserJet Pro MFP M176n PCLms
    Thanks
    I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will  not print but when run Scan doctor it will print on enternal print .....
    Wael Hilal

    Hello @ Averus89, 
    Welcome to the HP forum. 
    I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
    I would like to help you with this issue. 
    If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
    would set a manual DNS. 
    I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
    The DNS to try is:
    Primary: 209.244.0.3
    Secondary: 209.244.0.4
    Set the DNS then try printing the web services info page again. 
    Let me know if this helps. 
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • HP LaserJet CM1015 MFP All-In-One problem

    HP LaserJet CM1015 MFP All-In-One Printer gives a couple of vertical lines 1,5 inch from the right side (facing the printed paper), across the whole length of the paper. Same for different kinds of paper. Lines are more visible in colorpages. Same problem when I scan a page, so no software problem. Cleanprocedure from HPToolbox FX did not help. What can I do?
    Thanks in advance for help.

    I will need a little more information in order to help out. What email client are you using to the send the ePrint job to the printer? Are you including attachments? What are the file types and sizes of the attachments if you are sending those? Have you tried sending the email to the printer from a different email client like Gmail or Yahoo!? What OS are you using on the computer that you are sending the email to the printer? Is the printer the only recipient of the email? Thank you.
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Printing to a HP Color Laserjet CM4540 MFP from new iPad.

    I am trying to print from my new iPad to my HP Color Laserjet CM4540 MFP.
    When I try to print the iPad gives me the option to choose my printer. It currently only recognizes one printer- not the CM4540. It recognized the other printer without any problems or setup by myself.
    I'm assuming b/c the CM4540 is not supported to print from the iPad this is why I'm having trouble.
    Can someone confirm my assumption please? Or- let me know how to connect to the CM4540 to print?
    Thanks!!

    Hi there,
    You may find the information in the article below helpful.
    AirPrint Basics
    http://support.apple.com/kb/HT4356
    -Griff W.

  • My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw. It displays "No AirPrint Printers Found'.

    My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw.
    It displays "No AirPrint Printers Found."
    Same thing for iPhone 5S iOS 8.2.
    Both iPhone and printer on the same wifi network.
    I tried printing from different applications. AirPrint does not work.
    I tried turning off and back on, reset, printing from different applications, ...
    iPhone 6 prints through HP Wireless Direct printing.
    Sony laptop works via wifi.

    Hi mtotonji,
    Thank you for using the Apple Support Community. Given the nature of the issues you are describing and your current configuration, you may be better served by reaching out to one of Apple's other available resources for more direct assistance - https://getsupport.apple.com/GetproductgroupList.action
    Sincerely,
    - Brenden

  • Hp color laserjet cm6030 mfp is not giving color print

    hp color laserjet cm6030 mfp is not giving color print

    This article should cover the issue you are having. Give the steps a shot and let me know the results:
    http://goo.gl/ZxG9u
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Maybe you are looking for

  • Flash Player freezes Inet Exp 8--WHY?

    Last week, I finished my custom-built PC using Win 7 Pro 32-bit and Internet Explorer 8 with all current Microsoft updates.  I installed the latest and most current version of Flash Player (which reported a successful installation). Whenever I visit

  • No PDF-printer with Acrobat 8 on Win 7

    Hi there, hope someone can help me. I was looking through several forums, but couldn't find an answer: I have installed CS 3 on Win 7 professional 32 bit. All the software works (photoshop, dreamweaver, etc.) except Acrobat 8. I can open pdf-files  b

  • Can anyone explain error: can not access a member .. with modifiers ""

    Can anyone explain why this would occur: javax.faces.FacesException: Can't instantiate class: 'com.package.MyBean'.. class com.package.MyBean : java.lang.IllegalAccessException: Class java.beans.Beans can not access a member of class com.package.MyBe

  • Internet Explorer 11 'You are about to leave a secure connection'

    Hi there, I work in an IT Dept and we are testing Internet Explorer 11 for our latest build. It seems that when we switch the 'Warn if changing betwen secure and nonsecure mode' off, then webpages are stuggling to load. When the setting is turned on

  • How could i use resource bundle in managed bean instead of harding coding?

    component is created in managed bean programmatically, so how to set attributes(e.g. text, value) using resource bundling instead of hard coding, as like coding on the page directlly? Thanks for your help! Kevin.