HP Color Laserjet CM1015 MFP prints colors looking like 3D while single colors print fine.

HP Color Laserjet CM1015 MFP prints colors looking like 3D while single colors print fine. I have tried several calibrations with no change. I have reset printer to factory default with no success.

Hi AFace; hope you are doing well and sorry to hear that you are having this issue.
Your HP Color Laserjet CM1015 MFP is a commercial product. I will suggest posting and looking in the forum for HP Business Support for a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Similar Messages

HP Color laserJet CM1015 MFP printing problem

Till now my HP Color laserJet CM1015 MFP printer was working perfectly and suddenly prints miss aligned colors. Each color prints a little bit below another. I uninstalled printer’s software and reinstalled again but it didn’t help. There is no error messages. Printer’s alignment didn’t help either. Can anyone help me with this problem?
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Color LaserJet CM1015 mfp photo printing problem

I am running a Color LaserJet CM1015 mfp utilizing only HP print cartridges and HP Color Laser Photo Paper, glossy, yet I cannot seem to get a decent photo to print. There is always a black smear or two on the front of the printed page. It prints black and white and color just fine on plain paper but I cannot get a decent print on glossy. This has happened since day one so I don't think it's a dirty print roller,,etc. issue.
Thanks for any ideas!
Michael

Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

HP Color LaserJet CM1015 MFP Working?

Does anyone have the cm1015 mfp working with leopard?? Does scanning work correctly with HP Director? I wonder why none of these new printers work with 10.3 but not 10.5. Thanks

Hi there
I found a new version of the HP printer software package for cm1015/1017 printers on the HP website. Installing at this moment.
I'm looking forward that this will work on leopard ("system requirements: osX 10.5")!
Happy testing.
link: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=1846081&prodTypeId=18972&prodSeriesId=1846080&swLang=18&taskId=135&s wEnvOID=219
scroll down and choose the bundle released at 14 january.

Blue vertical streak on papers hp color laserjet cm1015 mfp

Recently my printer has printed 2 blue vertical streaks on documents I print. I checked the supply levels and there is still about 45% of the ink left for all the toner colors. I tried using the cleaning mode, but it didn't help the problem. If somebody could help me with my problem it would be greatly appreciated. Thank you!

Nobody has experianced this?

Insanity when printing on HP Color Laserjet CM1015 MFP

I've bought the Hewlett-Packard Laserjet 1015 a couple of days ago. When printed from the Acrobat Reader 8.1.2, some documents are printed with some criptical fonts instead of letters( totally unreadable ). "Print As Image" from Advanced Settings works, but is not a real option for me. The same files were printed without any problems on my old HP ColorJet 815. Has anybody encountered this problem already?

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Hp color laserjet cm1017 mfp

hp color laserjet cm1017 mfp
software

Hi,
You may install the HP UPD for printing functionality:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=1846084&swItemId=ds_99374_10&swEnvOid=413...
A Full Feature software for scanning is not available, however you may use the Windows Vista software as a workaround.
If you would like scan capabilties follow these steps insead the UPD driver above.
To get scan capabilities follow these steps:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03506225
The software for Windows Vista can be downloaded from the following link:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=1846084&swItemId=ly_51851_1&swEnvOid=2100
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Color LaserJet Pro MFP M176n installed but not printing

Hello Everyone,
I have problem with my printer Color LaserJet Pro MFP M176n.
at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
Please help......
- Windows is windows XP 32bit
- Printer name Color LaserJet Pro MFP M176n PCLms
Thanks
I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will not print but when run Scan doctor it will print on enternal print .....
Wael Hilal

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw. It displays "No AirPrint Printers Found'.

My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw.
It displays "No AirPrint Printers Found."
Same thing for iPhone 5S iOS 8.2.
Both iPhone and printer on the same wifi network.
I tried printing from different applications. AirPrint does not work.
I tried turning off and back on, reset, printing from different applications, ...
iPhone 6 prints through HP Wireless Direct printing.
Sony laptop works via wifi.

Hi mtotonji,
Thank you for using the Apple Support Community. Given the nature of the issues you are describing and your current configuration, you may be better served by reaching out to one of Apple's other available resources for more direct assistance - https://getsupport.apple.com/GetproductgroupList.action
Sincerely,
- Brenden

Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.

Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.

HP says that the drivers for your all in one print/scanner are downloadable from apple. For the scanner to use preview. image capture or the scan icon from the print driver queue. I don't know how old your HP is, but I know that the newer Os from apple don't support a lot of older printers. You might be able find a third party driver that could work.

Printing to a HP Color Laserjet CM4540 MFP from new iPad.

I am trying to print from my new iPad to my HP Color Laserjet CM4540 MFP.
When I try to print the iPad gives me the option to choose my printer. It currently only recognizes one printer- not the CM4540. It recognized the other printer without any problems or setup by myself.
I'm assuming b/c the CM4540 is not supported to print from the iPad this is why I'm having trouble.
Can someone confirm my assumption please? Or- let me know how to connect to the CM4540 to print?
Thanks!!

Hi there,
You may find the information in the article below helpful.
AirPrint Basics
http://support.apple.com/kb/HT4356
-Griff W.

HP Color LaserJet Pro MFP M177fw Printer always cool-down mode

Hi there, i am also meeting with the same issues like the cooldown mode printing.

Hi , I found something written by that you may find helpful regarding the printer going into cool down mode: I have provided a document with Resolving Control Panel Messages. Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation. Update the printer's firmware. HP Color LaserJet Pro MFP M177fw Drivers. Where is the printer located? (enclosed shelf, desk)How many pages are you printing when you get this message?What is the paper's weight and what kind of paper are you using? If the issue persists, please post back with the answer to the above questions. Thanks.

How to print from iphone to hp color laserjet CM1017 MFP printer

How to print from iphone to hp color laserjet CM1017 MFP printer

In order to AirPrint from your iPad/iPhone, here's all you need to do:
1. Make sure the printer and iPad/iPhone are connected to the same local network.
2. Open something you want to print (on the iPad/iPhone).
3. On the iPad/iPhone, tap the "Action" button (arrow curving out of a box).
4. Tap "Print".
If you have any issues with printing, below are some steps that should help you out!
1. Power off the printer.
2. Completely power off the iOS devices (hold the Sleep and Home buttons simultaneously until a message appears asking you to "Slide to power off". Slide across that bar, and it should completely power off).
3. Power the printer back on.
4. Power the iOS devices back on.
5. Try to print again.
Those steps usually resolve the issue. If they do not, try this additional steps:
6. Power cycle your router (usually done by unplugging the router’s power cord, waiting 20 seconds, and plugging it back in).
7. Make sure that the iOS devices and the printer are all connected to the same network, then try to print.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

HP Color Laserjet Pro MFP M177fw going cool down mood after printing every pages.

I have bought Color Laserjet Pro MFP M177fw before only 3days. From the very begining It says printing.... cooldown mood, and take a long paus. This issue occures after printing each page. I am using HP Toners. And my directly connected with wall socket(Electric). Please help me. It is urgent for me. Thanks in advance.

Afternoon , I found some information about the cool-down mode on your Laserjet Pro MFP M177fw. The product is too hot to continue printing at normal speed.
The product will pause longer between printed pages until it cools down.
Overheating occurs when the product lacks air ventilation or when it prints continuously for a long period of time. To prevent overheating, place the product in a well-ventilated area, and divide very large print jobs into smaller print jobs.Other than using it in a well ventilated room, you could see if there are any firmware updates available. You can click on this link to Getting Printer Updates for HP LaserJet Pro. If the issue continues, I would Contact HP Support for further assistance. Fill in the model number and the form to receive a case number. You can view all other ways of contacting HP from their list of Support Options. Thanks,

Hp color laserjet cm6030 mfp is not giving color print

hp color laserjet cm6030 mfp is not giving color print

This article should cover the issue you are having. Give the steps a shot and let me know the results:
http://goo.gl/ZxG9u
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Color Laserjet CM1015 MFP prints colors looking like 3D while single colors print fine.

Similar Messages

Maybe you are looking for