HP Color LaserJet CM1015 MFP Working?

Does anyone have the cm1015 mfp working with leopard?? Does scanning work correctly with HP Director? I wonder why none of these new printers work with 10.3 but not 10.5. Thanks

Hi there
I found a new version of the HP printer software package for cm1015/1017 printers on the HP website. Installing at this moment.
I'm looking forward that this will work on leopard ("system requirements: osX 10.5")!
Happy testing.
link: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=1846081&prodTypeId=18972&prodSeriesId=1846080&swLang=18&taskId=135&s wEnvOID=219
scroll down and choose the bundle released at 14 january.

Similar Messages

HP Color laserJet CM1015 MFP printing problem

Till now my HP Color laserJet CM1015 MFP printer was working perfectly and suddenly prints miss aligned colors. Each color prints a little bit below another. I uninstalled printer’s software and reinstalled again but it didn’t help. There is no error messages. Printer’s alignment didn’t help either. Can anyone help me with this problem?
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Color LaserJet CM1015 mfp photo printing problem

I am running a Color LaserJet CM1015 mfp utilizing only HP print cartridges and HP Color Laser Photo Paper, glossy, yet I cannot seem to get a decent photo to print. There is always a black smear or two on the front of the printed page. It prints black and white and color just fine on plain paper but I cannot get a decent print on glossy. This has happened since day one so I don't think it's a dirty print roller,,etc. issue.
Thanks for any ideas!
Michael

Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

HP Color Laserjet CM1015 MFP prints colors looking like 3D while single colors print fine.

HP Color Laserjet CM1015 MFP prints colors looking like 3D while single colors print fine. I have tried several calibrations with no change. I have reset printer to factory default with no success.

Hi AFace; hope you are doing well and sorry to hear that you are having this issue.
Your HP Color Laserjet CM1015 MFP is a commercial product. I will suggest posting and looking in the forum for HP Business Support for a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Insanity when printing on HP Color Laserjet CM1015 MFP

I've bought the Hewlett-Packard Laserjet 1015 a couple of days ago. When printed from the Acrobat Reader 8.1.2, some documents are printed with some criptical fonts instead of letters( totally unreadable ). "Print As Image" from Advanced Settings works, but is not a real option for me. The same files were printed without any problems on my old HP ColorJet 815. Has anybody encountered this problem already?

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Will the scan function of an HP Color LaserJet CM2320nf MFP work with Lion?

I have a Macbook Air connected to a Windows Small Business Server 2003. I can print on the HP 2320 fine with the Print & Scan utility, however the utility won't recognize the HP as a scanner. The forums I have read on Apple regarding other HP all in one printers is that they can't scan. HP's support forum is iffy at best; some locations indicating that a fix is due "late 2011", but sending me in a circular link pattern to find a solution. I have tried downloading the HP LaserJet AiO/HP Director to no avail, even connecting directly to the printer/scanner via USB. Downloading the drivers doesn't resolve.
Based on this HP link, I believe that scanning isn't supported. I am dumbfounded by this.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02950970 #A2

The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Blue vertical streak on papers hp color laserjet cm1015 mfp

Recently my printer has printed 2 blue vertical streaks on documents I print. I checked the supply levels and there is still about 45% of the ink left for all the toner colors. I tried using the cleaning mode, but it didn't help the problem. If somebody could help me with my problem it would be greatly appreciated. Thank you!

Nobody has experianced this?

HP Color LaserJet Pro MFP M177fw Not working with Fedora 14

Our ERP is compactible up to Fedora 14. But I newly purchased Printer(
HP Color LaserJet Pro MFP M177fw) is not working with this OS.
Give me a urgent solution

Hi @HealthITLadyRed,
I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
I have provided some steps to try to see if we can resolve this issue.
Check and remove any packaging material inside the printer and toner.
Disconnect the USB/Network/FAX and power the printer on Standalone.
Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
Update the printer's firmware by a USB connection. Software and Drivers.
Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
I can send a private message with another step to try.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet/Wireless)
What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
Is this a new printer?
If you appreciate my efforts, please click the Thumbs up button below.
If there is anything else I can help you with, just let me know. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Color Laserjet pro MFP M176n control panel not working

the control panel in the Color Laserjet pro MFP M176n is not working, is all blank, i can´t see anithhing in it. Is there a reset button or should i take it to the store where i buy it for a checkup?
thank you

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Color LaserJet Pro MFP M176n installed but not printing

Hello Everyone,
I have problem with my printer Color LaserJet Pro MFP M176n.
at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
Please help......
- Windows is windows XP 32bit
- Printer name Color LaserJet Pro MFP M176n PCLms
Thanks
I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will not print but when run Scan doctor it will print on enternal print .....
Wael Hilal

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HP Color LaserJet Pro MFP M177fw - PostScript support?

Hi,
I'm looking to purchase a new printer/scanner/copier(/fax is a nice to have, but not mandatory), and I'm deciding between the following models:
HP LaserJet Pro 100 color MFP M175nw
HP Color LaserJet Pro MFP M177fw
PostScript support is important for me, and I know that the 175 has this. However, I'm not sure about the 177, even after digging through several web pages and documents. Here's what I found:
- The main specs page for the 177 says that it supports "PCLm". I'm not familiar with this PCL variant, so I don't know how it compares to PCL5 or PCL6, etc. I was unable to find more information on "PCLm".
- The "Software Included" section of Page 2 of the PDF datasheet for the 177 mentions "HP PostScript" driver. This is the only place where I've seen any potential indication that the 177 supports PostScript. This section also mentions a "PCLmS" driver. I could not find any further information on "PCLmS".
- The for User Guide the 177 only mentions PostScript in a section that refers to ePrint. However, it does not imply that the 177 itself supports PostScript.
- The Product Specifications page (in the Support section of the HP site) for the 177 has a "Printing Specifications" section which lists only "PCL3 GUI" next to "Device languages".
I'm guessing that the 177 does not support PostScript, but does anyone have any more definitive information? Also, is there a description of PCLm / PCLmS somewhere?
Thanks!
This question was solved.
View Solution.

Hi Clent
Here is some information on both printers.
Here is a url for the printer specifications for the Color LaserJet Pro MFP M177fw
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03901180&tmp_task=prodinfoCategory&cc=us&dlc=en...
Data Sheet also.
http://www.shopping.hp.com/shopping/pdf/cz165a.pdf
Fonts and typefaces Depend on Operating System fonts and typefaces.
Print languages
PCLm
Laserjet Pro 100 color MFP M175nw
http://www.shopping.hp.com/shopping/pdf/ce866a.pdf
Print languages
HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF (v1.7), HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF (v1.7), AirPrint™ compatible
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp color laserjet pro mfp m177fw (Cant open SCANNER on computer)

Hi there,
I am using a desktop 27 inch Mac with OS X Yosemite 10.10.1
When I go to system preferences and click on printers/scanners I can see my mfp m177fw laserjet printer (wirelessly connected fine). But unlike on my Macbook Pro laptop on my desktop there is no SCANNER option to open up? Thus I am unable to scan from the printer to this desktop. I have the latest HP driver installed on the desktop computer for my m177fw printer.
Any ideas? Any help would be greatly appreciated
thanks!
Simon

Hello @Simonjayh,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the scan issue that you're experiencing since installing your HP Color LaserJet Pro MFP M177fw on your Mac OS X 10.10 computer. Can I please have you run through the steps below to get this product functioning properly again for you.
Step 1: Uninstall Drivers:
First, can I please have you click here and run through the steps provided to Reset the Print System on your Mac OS X 10.10 computer. Please refer to the section under 'Resetting the printing system in OS X Lion' as the steps are the same for your Mac OS X 10.10 Operating System. Resetting the Print System will remove every printer from your Print & Scan window on your computer. However, this does not uninstall the devices. Therefore, should you use other printers on your Mac OS X 10.10 computer simply ensure that they are plugged in with a USB Cable or Network connected and add (+) them back in. Do not add your HP Laserjet printer back in at this time.
Next, please click here to access the steps on how to properly uninstall the Software and Driver Package for your printer. Once the website opens select the dropdown for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for your Mac OS X 10.10 Operating System. Once the uninstall has completed successfully, please proceed to the next step.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
Lastly, please click here to download the appropriate Mac OS X 10.10 Full Feature Software and Driver package for you printer. Once the website opens select the Download button on the top left. Once the Download is complete please follow the onscreen steps to reinstall you printer.
Once your printer has been successfully reinstalled, please test the HP Scan functions again. For additional scan information, you may want to refer to : Scanning with the Full Feature HP Software in OS X v10.10 Yosemite
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Color LaserJet Pro MFP M177fw don't go to sleep mode

Hi and sorry for my english In settings of HP Color LaserJet Pro MFP M177fw I tryed 15 and 5 minutes before sleep mode. After 15 or 5 minutes printer going to sleep, but if I'm used printer even only one time, after that he don't sleep ( printer's screen not dim), not after 5 and 15 minutes. Printer is connected through wi-fi, Windows 8.1 x64. Any ideas?)

Hi Denis88,
I see by your post that the printer isn't going into sleep mode.
I can help you with this issue.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
I would update the printer's firmware if the printer won't go into sleep mode.
HP Color LaserJet Pro MFP M177fw Drivers.
Select your operating system, click next, click the link for firmware.
I have provided some information from the manual for the sleep mode that you can check out.
COLOR LASERJET PRO MFP.
EcoSMART Console: Change the default times for entering Sleep mode or Auto Power
Down mode. Configure which events cause the product to wake.
Printer Settings Auto-off Configure the product to automatically turn off after a period of
inactivity. You can adjust the number of minutes after which the product turns off.
Touchscreen control panel:
1. From the Home screen on the product control panel, touch the Setup button.
2. Open the following menus:
System Setup
Energy Settings
Sleep/Auto Off After
3. Select the time for the Sleep/Auto Off delay.
NOTE: The default value is 15 Minutes.
4. The product automatically wakes when it receives jobs or when you touch the screen on the product
control panel.
You can change which events cause the product to wake. Open the following menus:
System Setup
Energy Settings
Wake/Auto On Events
To turn off a wake event, select the event, and then select the No option.
Hope this helps resolve your issue.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color Laserjet PRO MFP M177FW Cannot connect to web services

I bought a HP Color Laserjet PRO MFP M177FW today and I set up it. It can print and scan over wireless network. However, It cannot connect to web services correctly. I set the DNS numbers with google DNS addresses. I changed its IP address with manually. The IP address is unique. Normally It doesn't enable/remove webservices. But when I restart it, it can do for few minutes. It can take an e-mail address but It doesn't print any information sheet. When I try to print a sheet It says "Connection Problem" at first few minutes and later it says "Connecting"and it waits, there is no error message. What am I suppossed to do? Please help me.
This question was solved.
View Solution.

Hello rasitbolukcu,
Welcome to the HP Support forums. I understand that you are having difficulties enabling the web services for your Laserjet Pro MFP M177fw printer.
I appreciate all the information you gave me, it makes it much easier to assist you with the troubleshooting. I have included the Getting the Latest Firmware and Product Updates document. It will walk you through ensuring the printer has the latest firmware. Once you have updated the printer, please try to enable the web services again.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Color LaserJet Pro MFP M177fw Scanning

I bought and jsut setup an HP Color LaserJet Pro MFP M177fw.
We are a Mac household, and we connect via wireless to the printer, which works great.
My issue is scanning. On the little screen on the printer, I can copy, print and even fax. No option for scanning. There is some bullsh*t app that I've had to download via HP called Readiris, which is useless. There is no apparent way to initiate a scan via this app.
So I've bought a multifunction printer that doesn't scan. Any help?

It doesn't scan?!
Below is the text from the first page of the first link one clicks on about this printer. How _on earth_ is one supposed to deduce pre-purchase that it doesn't scan from the main menu? Argh. As an HP employee myself, this is aggravating in the extreme.
Ok, venting aside, this link <http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03967506#N229> is not offering a solution.
I am running OSX 10.9.1. I am unable to find the Full Driver to donwload in order to connect to this printer in a manner that would enable any of the 3 methods of scanning (Via Preview, Image Capture, etc.) to work. Can you please provide a link to the Full Driver for this MFP M177fw for Mac OSX 10.9? Thanks.
*** Start copied text from online website on HP printer ***
This affordable HP Color LaserJet Pro MFP brings vibrant color printing
in-house, and boosts productivity with Ethernet connectivity. Enable easy
printing at work, home, or on the go with mobile printing features.1
Print speed:4
Black: Up to 17 ppm; Color: Up to 4 ppm
Scan resolution: Up to 1200 x 1200 dpi (hardware); Up to 1200 x 1200 dpi
(optical)
Copy resolution: Black (text): Up to 300 x 300 dpi; Black (graphics): Up to
400 x 600 dpi; Color (text and graphics): Up to 300 x 300 dpi
Display: 3.0" LCD (color graphics)
Standard connectivity: Hi-Speed USB 2.0 port; built-in Fast Ethernet
10/100Base-TX network port; Wireless 802.11b/g/n
Duty cycle:5
Up to 20,000 pages

HP Color LaserJet CM1015 MFP Working?

Similar Messages

Maybe you are looking for