HP Color LaserJet CM1312nfi MEP

I recently got a Mac Mini with OS X 10.8 (upgraded to 10.8.1), and tried to run HP Scan (it was transfered from my macbookpro snow leopard). It would not work, so I downloaded HewlettPackardPrinterDrivers.pkg and installed it and it didn't work, so I uninstalled all things HP on my mac (using CleanMyMac) and reinstalled HewlettPackardPrinterDrivers.pkg but it is not appearing in my Applications folder. I tried printing and it worked, but since there is no folder, I cannot access HP Scan or anything else of the "all in one" options. I'm not even sure why I was able to print. I searched my harddrive for HP/Hewlett and the only thing that came up was HewlettPackardPrinterDrivers.pkg.
I don't get a scan tab in the in the setting for printers and scanner s. I have too much money in this printer to just replace it.
Jim

Please refer to this web site. It shows that printing is supported but not scanning.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDi splay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTo k=com.vignette.cachetoken&javax.portlet.prp_efb5c0793523e51970c8fa22b053ce01=wsr p-navigationalState%3DdocId%253Demr_na-c03800910-1%257CdocLocale%253Den_US&javax .portlet.tpst=efb5c0793523e51970c8fa22b053ce01&sp4ts.oid=25475&ac.admitted=13857 62871439.876444892.492883150#N10031

Similar Messages

Can't install HP Color LaserJet CM1312nfi MFP at notebook HP Pavilion

I bought new notebook HP Pavilion 13-a051sr with Windows 8.1 (x64) onboard.
I'm trying to install HP Scan.
While installing all-in-one HP Color LaserJet CM1312nfi MFP using "CM1312series-win7-full-solution-AM-EMEA1-v5.1.exe" can not get after the dialog window "Locating the printer". Printer could not be found even if I write down printer' IP-address. The latest printer firmware is already installed. Firewall is disabled, antivirus is closed.
I installed printer without any problems using it IP-address. What can I do in order to install scanner module?

HP Print Drivers

Software for HP Color LaserJet CM1312nfi MFP is not currently available from the Software Update server.

I recently upgraded to Mountain Lion, and found that I could no longer print to my HP CM1312nfi.
This is usually a problem with HP at every upgrade, but this time, they appear to have offloaded the driver download process to Apple.
My printer is connected wirelessly through a time capsule by IP address—the physical, not the virtual, e.g: 169.254.xx.xx instead of 10.0.1.x.
When I try to download the driver by bonjour or IP, I get the following error message:
Can't install the software for the Hewlett-Packard HP Color LaserJet CM1312nfi MFP because it is not currently available from the Software Update server.
Is this truly a Software Update server error, and if so, any clue when it will be resolved?
I am able to print with the generic driver as of now, but fax and scan capabilites are gone. The add fax dialog lists no devices.
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?
Thanks for your time and attention.

Of course, once I posted this, I tried again and downloaded the driver without issue.
My second question still stands, however:
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?

HP Color Laserjet CM1312nfi MFP and OSX Yosemite

Hello all. I have a HP Color Laserjet CM1312nfi MFP, and i can't install it on OSX 10.10 Yosemite. When i plug in the USB cable, nothing happens. My Mac does not find the printer, and i can't install driver from HP's website. All USB ports in my Mac works, and i can plug the cable in a Windows computer, where there is no problem at all. I tried to update the firmware through a Windows computer, but it did not helped. Any suggestions?

The HP drivers won't load on my 10.10.x (10.10.1 thru 10.10.4) OSX macbook pro. The install says the version of OSX isn't supported even thought I've tried 1.5.0 dmg file which is for 10.7 and greater. I did the math and I believe 10.10.x is greater than any version of 10.7. I also tried HP Easy Scan and it doesn't even see my scanner. Printing works fine, but I scan a lot of paper. Also, I've found that the Mac OSX version of the HP software (when it still worked) creates obscenely large PDF files. I can get around this by opening Adobe Acrobat Pro and re-saving the file as a reduced file size with the same name. I can take a 25 MB file HP creates and get it down to about 300KB or so. I found a way around all this but you won't like it. I've loaded Parallels (installed windows 7 ultimate 64 bit) and installed the windows client in my parallels image. The windows client works fine. Not a solution I prefer, but this is an HP issue not an apple issue .... HP hasn't put out a driver for this printer in the better part of 3.5 years. Lastly, I'm not hooking up a USB cable to my printer/fax/scanner .... what's the point of having a dhcp network capable printer if I have to hard wire to a PC? I've used HP printers since the mid-'90s, but I guess it's time to find a company that supports OSX.

What is the IP address for the HP Color Laserjet CM1312nfi MFP?

I need to install my HP printer that is hooked up to a wireless network to an iMac. (as a shared printer)
What is the IP address for the HP Color Laserjet CM1312nfi MFP in order for me to install in the apple? Thanks.

AirPort Utility can be used to configure and change the settings on any of the AirPorts.
If you have a Mac, AirPort Utility is here:
Macintosh HD > Applications > Utiltiies > AirPort Utility
If you have a PC, AirPort Utility for Windows is on the disk that came with the AirPort Express

Hp color laserjet cm1312nfi mfp misprint

Good day.
I have a HP Color Laserjet CM1312nfi MFP, when printing, it prints 2 to 3 pages and then displays cleaning on the lcd display and after it runs through with the cleaning it comes up with the error "Misprint, Press okay to continue" and if you do so it carries on printing the rest of the pages and the quality is 100%. Just annoying that you have to keep getting up and pressing continue on the printer all the time. It does not jam or anything.
Any suggestions to why the printer is doing this?
Regards
Aron

The HP drivers won't load on my 10.10.x (10.10.1 thru 10.10.4) OSX macbook pro. The install says the version of OSX isn't supported even thought I've tried 1.5.0 dmg file which is for 10.7 and greater. I did the math and I believe 10.10.x is greater than any version of 10.7. I also tried HP Easy Scan and it doesn't even see my scanner. Printing works fine, but I scan a lot of paper. Also, I've found that the Mac OSX version of the HP software (when it still worked) creates obscenely large PDF files. I can get around this by opening Adobe Acrobat Pro and re-saving the file as a reduced file size with the same name. I can take a 25 MB file HP creates and get it down to about 300KB or so. I found a way around all this but you won't like it. I've loaded Parallels (installed windows 7 ultimate 64 bit) and installed the windows client in my parallels image. The windows client works fine. Not a solution I prefer, but this is an HP issue not an apple issue .... HP hasn't put out a driver for this printer in the better part of 3.5 years. Lastly, I'm not hooking up a USB cable to my printer/fax/scanner .... what's the point of having a dhcp network capable printer if I have to hard wire to a PC? I've used HP printers since the mid-'90s, but I guess it's time to find a company that supports OSX.

HP Color Laserjet CM1312nfi MFP cannot scan

Dear HP support,
I use a MacBook and my printer is an HP Color Laserjet CM1312nfi MFP. When doing the HP setup assitant I connect the printer to the MacBook with a USB cable but the assistant does not recognize the printer and I cannot carry on with the setup process. What do I need to do? My OSX version is 10.10.2
kind regards.

Hi,
Scanning is no longer supported on Yosemite, only printing and faxing are available for the operating system as you may find listed by this chart for the HP Color LaserJet CM1312 MFP Series:
http://support.apple.com/en-us/HT201465#HP
The HP setup assitant is not a part of the software provided for 10.10, it is intended for older verisons of the OS and therefore it does not work
You may try the 3rd party Vuescan scanning software which seems to support your scanner with no need for any other driver:
http://www.hamrick.com/vuescan/hp_laserjet_cm1312.html
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp color laserjet cm1312nfi mfp doesn´t scan with yosemite

I can´t do work the scan of this machine

Hi @mesocost ,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English:                                 http://h30434.www3.hp.com
Spanish:                               http://h30467.www3.hp.com
French:                                 http://h30478.www3.hp.com
Portuguese:                       http://h30487.www3.hp.com
German:                              http://h30492.www3.hp.com
Korean:                                http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese:         http://h30471.www3.hp.com/t5/community/communitypage
I work for HP

HP Color LaserJet CM1312nfi MFP driver for OSX 10.9.2

I recently updated my operating system to OSX 10.9.2 and now I can't scan. Scanning function in HP director is greyed out and my Apple scanning utilities do not detect a scanner installed. Tried switching from network to PC connection to no avail. When will HP have a new driver that updates full printer function compatibility with OSX 10.9.2?

Hello maili911,
Welcome to the HP Forums!
I understand your concerns. Unfortunately, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP.

Scanning Software for HP Color LaserJet CM1312nfi MFP

Has anybody noticed the difference between download drivers with scanning software and the orginal CD PC Setup scanning software. It seems to me that the downloads of drivers and softwares are only the light version of scanning software whereas; 1. there is no toolbar wh about help to see which version of scanning software is installed. 2. The orginal setup has a full version of scanning software.My xp box died xmas and since 2010 I setup the prnt drvs/scan software and I never though this would be a problem if I had to setup again using the downloads from HP. Thank you in advance!

Hi,
The original CD is not intended for Windows 7, however you may download the software for Windows 7 below:
http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3562007&swItemId=tw_77243_2&swEnvOid=4063
Be sure to unplug the USB if it is directly connected and uninstall any installed HP Software of the printer from Programs and Features prior installing the software above.
Hope that helps.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Color LaserJet CM1312nfi MFP Mystery Wake on LAN

The printer wakes unexpectedly, and unpredictably on the network. I cannot determine what, if anything, is waking it. The printer wakes and goes into calibration without any users on the network and without any print jobs. Mystery wake on LAN.

The HP drivers won't load on my 10.10.x (10.10.1 thru 10.10.4) OSX macbook pro. The install says the version of OSX isn't supported even thought I've tried 1.5.0 dmg file which is for 10.7 and greater. I did the math and I believe 10.10.x is greater than any version of 10.7. I also tried HP Easy Scan and it doesn't even see my scanner. Printing works fine, but I scan a lot of paper. Also, I've found that the Mac OSX version of the HP software (when it still worked) creates obscenely large PDF files. I can get around this by opening Adobe Acrobat Pro and re-saving the file as a reduced file size with the same name. I can take a 25 MB file HP creates and get it down to about 300KB or so. I found a way around all this but you won't like it. I've loaded Parallels (installed windows 7 ultimate 64 bit) and installed the windows client in my parallels image. The windows client works fine. Not a solution I prefer, but this is an HP issue not an apple issue .... HP hasn't put out a driver for this printer in the better part of 3.5 years. Lastly, I'm not hooking up a USB cable to my printer/fax/scanner .... what's the point of having a dhcp network capable printer if I have to hard wire to a PC? I've used HP printers since the mid-'90s, but I guess it's time to find a company that supports OSX.

Lost scanning functionality on HP Color LaserJet CM1312nfi MFP

I am running OSX 10.9.2 on my late 2009 iMac and all of a sudden my printer software does not work and the Apple software does not provide scanning support for my printer. Is this going to be fixed any time soon???

Try using Image Capture, it is in your Application Folder.
Also see > Problems scanning with HP printer and Mavericks and "More Like This" just to your right.

Snow Leopard Breaks Bonjour Printing (HP Color Laserjet)

Hi,
I have a MacBook (newly reformatted) with the newest version of print drivers from HP's website, connected to a HP Color Laserjet CM1312nfi, with print sharing enabled and "share this printer over the network checked". It used to work well for Bonjour printing from all my other leopard macs in my house, before I updated to Snow Leopard.
All of the computers I mention here are fully updated.
On the other computers....
The printer shows up in add a printer under Bonjour, but it takes a long time to find the driver. I have tried printing using the "Generic PostScript Printer" driver as well as the HP Color Laserjet cm1312MFP driver, but both get stuck at "Connecting to Printer". After a few minutes of this they peter out and just mark the job as completed.
This is all while the printer is awake and the host computer is awake.
Another computer, without the HP Printer solution software installed, but that still comes up with the HP Color Laserjet cm1312 MFP drivers, will say "Connected to printer" then automatically mark the job as on hold. No matter how many times I reset the print queue, on this computer nothing works.
These computers are all running 10.6.
I can print directly from the computer that is hosting the bonjour printer without any problems.
Any suggestions?
Thanks,
Josh

Josh,
First, let me make sure my assumptions are correct. The printer is USB connected to the Mac that has printer sharing turned on, and the other Macs find the shared printer via Bonjour. All the Macs are running Snow Leopard. The computer with the printer connected via USB prints just fine. All of the other computers don't work.
So, let me ask this. If you open up the Sharing System Preference, and select Printer Sharing, Printer Sharing is turned on, the printer you want to share is listed in the list with a checkmark next to it, and the Users is setup so Everyone Can Print. Also when you open up the Print & Fax System Preference and click on your printer, the "Share this printer on the network" checkbox is on as well.
Next make sure that all the computer are running the HP Drivers version 2.2 from Apple Software Update (or downloaded from [Apple.com|http://support.apple.com/kb/DL907]).
If all of this is true, let me ask if you connect the device to Ethernet (if possible at least temporarily) if all of the computers can find and print to the CM1312? This might help narrow things down.
Just trying to help.
Andrew
Message was edited by: HP Mac Architect

Color LaserJet Pro MFP M176n installed but not printing

Hello Everyone,
I have problem with my printer Color LaserJet Pro MFP M176n.
at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
Please help......
- Windows is windows XP 32bit
- Printer name Color LaserJet Pro MFP M176n PCLms
Thanks
I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will not print but when run Scan doctor it will print on enternal print .....
Wael Hilal

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HP Color Laserjet 4600dn - presets don't save

We have an HP Color Laserjet 4600dn which is networked and is using Appletalk.
The printer has two paper trays-- #1 is a pulldown rack which will hold various paper sizes and #2 is a 500 sheet tray for letter size paper.
In OS X 10.4 we could go into the "Paper Feed" feature in the Print menu (in MS Word, for example), set the feed to Tray #2 and save this as a "preset" we called "Main Tray".
In OS X Leopard I can no longer save the preset so the paper is always fed out of tray #1 unless (1) there is no paper in tray #1 or (2) I manually set the paper feed feature each time.
HP does not have a newer drive on its website and Leopard has the CLJ 4600 in its list of printer drivers and has settings for features such memory and duplex.
Anyone have an idea how to get the very useful "presets" function working again?
Thanks
Rich

This is a known problem and will most likely have to wait for an update from Apple.
http://discussions.apple.com/message.jspa?messageID=5685294#5685294
http://discussions.apple.com/message.jspa?messageID=5684428#5684428

HP Color LaserJet CM1312nfi MEP

Similar Messages

Maybe you are looking for