Hp color laserjet cm1312nfi mfp misprint

Good day.
I have a HP Color Laserjet CM1312nfi MFP, when printing, it prints 2 to 3 pages and then displays cleaning on the lcd display and after it runs through with the cleaning it comes up with the error "Misprint, Press okay to continue" and if you do so it carries on printing the rest of the pages and the quality is 100%. Just annoying that you have to keep getting up and pressing continue on the printer all the time. It does not jam or anything.
Any suggestions to why the printer is doing this?
Regards
Aron

The HP drivers won't load on my 10.10.x (10.10.1 thru 10.10.4) OSX macbook pro. The install says the version of OSX isn't supported even thought I've tried 1.5.0 dmg file which is for 10.7 and greater. I did the math and I believe 10.10.x is greater than any version of 10.7. I also tried HP Easy Scan and it doesn't even see my scanner. Printing works fine, but I scan a lot of paper. Also, I've found that the Mac OSX version of the HP software (when it still worked) creates obscenely large PDF files. I can get around this by opening Adobe Acrobat Pro and re-saving the file as a reduced file size with the same name. I can take a 25 MB file HP creates and get it down to about 300KB or so. I found a way around all this but you won't like it. I've loaded Parallels (installed windows 7 ultimate 64 bit) and installed the windows client in my parallels image. The windows client works fine. Not a solution I prefer, but this is an HP issue not an apple issue .... HP hasn't put out a driver for this printer in the better part of 3.5 years. Lastly, I'm not hooking up a USB cable to my printer/fax/scanner .... what's the point of having a dhcp network capable printer if I have to hard wire to a PC? I've used HP printers since the mid-'90s, but I guess it's time to find a company that supports OSX.

Similar Messages

Can't install HP Color LaserJet CM1312nfi MFP at notebook HP Pavilion

I bought new notebook HP Pavilion 13-a051sr with Windows 8.1 (x64) onboard.
I'm trying to install HP Scan.
While installing all-in-one HP Color LaserJet CM1312nfi MFP using "CM1312series-win7-full-solution-AM-EMEA1-v5.1.exe" can not get after the dialog window "Locating the printer". Printer could not be found even if I write down printer' IP-address. The latest printer firmware is already installed. Firewall is disabled, antivirus is closed.
I installed printer without any problems using it IP-address. What can I do in order to install scanner module?

HP Print Drivers

Software for HP Color LaserJet CM1312nfi MFP is not currently available from the Software Update server.

I recently upgraded to Mountain Lion, and found that I could no longer print to my HP CM1312nfi.
This is usually a problem with HP at every upgrade, but this time, they appear to have offloaded the driver download process to Apple.
My printer is connected wirelessly through a time capsule by IP address—the physical, not the virtual, e.g: 169.254.xx.xx instead of 10.0.1.x.
When I try to download the driver by bonjour or IP, I get the following error message:
Can't install the software for the Hewlett-Packard HP Color LaserJet CM1312nfi MFP because it is not currently available from the Software Update server.
Is this truly a Software Update server error, and if so, any clue when it will be resolved?
I am able to print with the generic driver as of now, but fax and scan capabilites are gone. The add fax dialog lists no devices.
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?
Thanks for your time and attention.

Of course, once I posted this, I tried again and downloaded the driver without issue.
My second question still stands, however:
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?

HP Color Laserjet CM1312nfi MFP and OSX Yosemite

Hello all. I have a HP Color Laserjet CM1312nfi MFP, and i can't install it on OSX 10.10 Yosemite. When i plug in the USB cable, nothing happens. My Mac does not find the printer, and i can't install driver from HP's website. All USB ports in my Mac works, and i can plug the cable in a Windows computer, where there is no problem at all. I tried to update the firmware through a Windows computer, but it did not helped. Any suggestions?

The HP drivers won't load on my 10.10.x (10.10.1 thru 10.10.4) OSX macbook pro. The install says the version of OSX isn't supported even thought I've tried 1.5.0 dmg file which is for 10.7 and greater. I did the math and I believe 10.10.x is greater than any version of 10.7. I also tried HP Easy Scan and it doesn't even see my scanner. Printing works fine, but I scan a lot of paper. Also, I've found that the Mac OSX version of the HP software (when it still worked) creates obscenely large PDF files. I can get around this by opening Adobe Acrobat Pro and re-saving the file as a reduced file size with the same name. I can take a 25 MB file HP creates and get it down to about 300KB or so. I found a way around all this but you won't like it. I've loaded Parallels (installed windows 7 ultimate 64 bit) and installed the windows client in my parallels image. The windows client works fine. Not a solution I prefer, but this is an HP issue not an apple issue .... HP hasn't put out a driver for this printer in the better part of 3.5 years. Lastly, I'm not hooking up a USB cable to my printer/fax/scanner .... what's the point of having a dhcp network capable printer if I have to hard wire to a PC? I've used HP printers since the mid-'90s, but I guess it's time to find a company that supports OSX.

What is the IP address for the HP Color Laserjet CM1312nfi MFP?

I need to install my HP printer that is hooked up to a wireless network to an iMac. (as a shared printer)
What is the IP address for the HP Color Laserjet CM1312nfi MFP in order for me to install in the apple? Thanks.

AirPort Utility can be used to configure and change the settings on any of the AirPorts.
If you have a Mac, AirPort Utility is here:
Macintosh HD > Applications > Utiltiies > AirPort Utility
If you have a PC, AirPort Utility for Windows is on the disk that came with the AirPort Express

HP Color Laserjet CM1312nfi MFP cannot scan

Dear HP support,
I use a MacBook and my printer is an HP Color Laserjet CM1312nfi MFP. When doing the HP setup assitant I connect the printer to the MacBook with a USB cable but the assistant does not recognize the printer and I cannot carry on with the setup process. What do I need to do? My OSX version is 10.10.2
kind regards.

Hi,
Scanning is no longer supported on Yosemite, only printing and faxing are available for the operating system as you may find listed by this chart for the HP Color LaserJet CM1312 MFP Series:
http://support.apple.com/en-us/HT201465#HP
The HP setup assitant is not a part of the software provided for 10.10, it is intended for older verisons of the OS and therefore it does not work
You may try the 3rd party Vuescan scanning software which seems to support your scanner with no need for any other driver:
http://www.hamrick.com/vuescan/hp_laserjet_cm1312.html
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp color laserjet cm1312nfi mfp doesn´t scan with yosemite

I can´t do work the scan of this machine

Hi @mesocost ,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English:                                 http://h30434.www3.hp.com
Spanish:                               http://h30467.www3.hp.com
French:                                 http://h30478.www3.hp.com
Portuguese:                       http://h30487.www3.hp.com
German:                              http://h30492.www3.hp.com
Korean:                                http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese:         http://h30471.www3.hp.com/t5/community/communitypage
I work for HP

HP Color LaserJet CM1312nfi MFP driver for OSX 10.9.2

I recently updated my operating system to OSX 10.9.2 and now I can't scan. Scanning function in HP director is greyed out and my Apple scanning utilities do not detect a scanner installed. Tried switching from network to PC connection to no avail. When will HP have a new driver that updates full printer function compatibility with OSX 10.9.2?

Hello maili911,
Welcome to the HP Forums!
I understand your concerns. Unfortunately, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP.

Scanning Software for HP Color LaserJet CM1312nfi MFP

Has anybody noticed the difference between download drivers with scanning software and the orginal CD PC Setup scanning software. It seems to me that the downloads of drivers and softwares are only the light version of scanning software whereas; 1. there is no toolbar wh about help to see which version of scanning software is installed. 2. The orginal setup has a full version of scanning software.My xp box died xmas and since 2010 I setup the prnt drvs/scan software and I never though this would be a problem if I had to setup again using the downloads from HP. Thank you in advance!

Hi,
The original CD is not intended for Windows 7, however you may download the software for Windows 7 below:
http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3562007&swItemId=tw_77243_2&swEnvOid=4063
Be sure to unplug the USB if it is directly connected and uninstall any installed HP Software of the printer from Programs and Features prior installing the software above.
Hope that helps.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Color LaserJet CM1312nfi MFP Mystery Wake on LAN

The printer wakes unexpectedly, and unpredictably on the network. I cannot determine what, if anything, is waking it. The printer wakes and goes into calibration without any users on the network and without any print jobs. Mystery wake on LAN.

The HP drivers won't load on my 10.10.x (10.10.1 thru 10.10.4) OSX macbook pro. The install says the version of OSX isn't supported even thought I've tried 1.5.0 dmg file which is for 10.7 and greater. I did the math and I believe 10.10.x is greater than any version of 10.7. I also tried HP Easy Scan and it doesn't even see my scanner. Printing works fine, but I scan a lot of paper. Also, I've found that the Mac OSX version of the HP software (when it still worked) creates obscenely large PDF files. I can get around this by opening Adobe Acrobat Pro and re-saving the file as a reduced file size with the same name. I can take a 25 MB file HP creates and get it down to about 300KB or so. I found a way around all this but you won't like it. I've loaded Parallels (installed windows 7 ultimate 64 bit) and installed the windows client in my parallels image. The windows client works fine. Not a solution I prefer, but this is an HP issue not an apple issue .... HP hasn't put out a driver for this printer in the better part of 3.5 years. Lastly, I'm not hooking up a USB cable to my printer/fax/scanner .... what's the point of having a dhcp network capable printer if I have to hard wire to a PC? I've used HP printers since the mid-'90s, but I guess it's time to find a company that supports OSX.

Lost scanning functionality on HP Color LaserJet CM1312nfi MFP

I am running OSX 10.9.2 on my late 2009 iMac and all of a sudden my printer software does not work and the Apple software does not provide scanning support for my printer. Is this going to be fixed any time soon???

Try using Image Capture, it is in your Application Folder.
Also see > Problems scanning with HP printer and Mavericks and "More Like This" just to your right.

Color LaserJet Pro MFP M176n installed but not printing

Hello Everyone,
I have problem with my printer Color LaserJet Pro MFP M176n.
at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
Please help......
- Windows is windows XP 32bit
- Printer name Color LaserJet Pro MFP M176n PCLms
Thanks
I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will not print but when run Scan doctor it will print on enternal print .....
Wael Hilal

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HP Color LaserJet Pro MFP M177fw - PostScript support?

Hi,
I'm looking to purchase a new printer/scanner/copier(/fax is a nice to have, but not mandatory), and I'm deciding between the following models:
HP LaserJet Pro 100 color MFP M175nw
HP Color LaserJet Pro MFP M177fw
PostScript support is important for me, and I know that the 175 has this. However, I'm not sure about the 177, even after digging through several web pages and documents. Here's what I found:
- The main specs page for the 177 says that it supports "PCLm". I'm not familiar with this PCL variant, so I don't know how it compares to PCL5 or PCL6, etc. I was unable to find more information on "PCLm".
- The "Software Included" section of Page 2 of the PDF datasheet for the 177 mentions "HP PostScript" driver. This is the only place where I've seen any potential indication that the 177 supports PostScript. This section also mentions a "PCLmS" driver. I could not find any further information on "PCLmS".
- The for User Guide the 177 only mentions PostScript in a section that refers to ePrint. However, it does not imply that the 177 itself supports PostScript.
- The Product Specifications page (in the Support section of the HP site) for the 177 has a "Printing Specifications" section which lists only "PCL3 GUI" next to "Device languages".
I'm guessing that the 177 does not support PostScript, but does anyone have any more definitive information? Also, is there a description of PCLm / PCLmS somewhere?
Thanks!
This question was solved.
View Solution.

Hi Clent
Here is some information on both printers.
Here is a url for the printer specifications for the Color LaserJet Pro MFP M177fw
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03901180&tmp_task=prodinfoCategory&cc=us&dlc=en...
Data Sheet also.
http://www.shopping.hp.com/shopping/pdf/cz165a.pdf
Fonts and typefaces Depend on Operating System fonts and typefaces.
Print languages
PCLm
Laserjet Pro 100 color MFP M175nw
http://www.shopping.hp.com/shopping/pdf/ce866a.pdf
Print languages
HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF (v1.7), HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF (v1.7), AirPrint™ compatible
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color LaserJet Pro MFP M177fw fax to pc

I have just bought this printer and want to msend faxes to my pc. I was told by PC world that it had this function. So far I cant find it can anyone help. Many thanks

Hi ,  I would be happy to help shed some light on the issue your are having with trying to setup this Color LaserJet Pro MFP M177fw to receive your faxes on your PC.  I have looked into this further for you, and I'm pretty sure this model doesn't support receiving faxes on your PC. You can double check to make sure I haven't missed it in the COLOR LASERJET PRO MFP M177 User Guide.
I did however locate a different model, where in the manual does provide instructions on how to set this feature up but it is a black only printer. Its the LaserJet Pro MFP M225dw (again black only, no colour.)
Step 5 (Optional): Configure settings for receiving digital faxes (Windows) The product can save incoming digital faxes to a computer folder. Use the HP Digital Fax Setup Wizard to configure the settings. This feature is available only for Windows. 1. Click Start, and then click Programs. 2. Click HP, click the name of the product, and then click Digital Fax Setup Wizard. 3. Follow the on-screen instructions to configure the settings.  HP also has this feature available on it's HP Officejet Pro 8610/8620/8630 e-All-in-One Printers, which are Colour Inkjets. Some of the commerical products also support this feature but I'm unsure of which ones. I would really suggest contacting HP Shopping for more information on these models.  Hopefully this has answered your questions, and please let me know if there is anything else I can do to help.   Thanks,

Hp color laserjet pro mfp m177fw (Cant open SCANNER on computer)

Hi there,
I am using a desktop 27 inch Mac with OS X Yosemite 10.10.1
When I go to system preferences and click on printers/scanners I can see my mfp m177fw laserjet printer (wirelessly connected fine). But unlike on my Macbook Pro laptop on my desktop there is no SCANNER option to open up? Thus I am unable to scan from the printer to this desktop. I have the latest HP driver installed on the desktop computer for my m177fw printer.
Any ideas? Any help would be greatly appreciated
thanks!
Simon

Hello @Simonjayh,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the scan issue that you're experiencing since installing your HP Color LaserJet Pro MFP M177fw on your Mac OS X 10.10 computer. Can I please have you run through the steps below to get this product functioning properly again for you.
Step 1: Uninstall Drivers:
First, can I please have you click here and run through the steps provided to Reset the Print System on your Mac OS X 10.10 computer. Please refer to the section under 'Resetting the printing system in OS X Lion' as the steps are the same for your Mac OS X 10.10 Operating System. Resetting the Print System will remove every printer from your Print & Scan window on your computer. However, this does not uninstall the devices. Therefore, should you use other printers on your Mac OS X 10.10 computer simply ensure that they are plugged in with a USB Cable or Network connected and add (+) them back in. Do not add your HP Laserjet printer back in at this time.
Next, please click here to access the steps on how to properly uninstall the Software and Driver Package for your printer. Once the website opens select the dropdown for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for your Mac OS X 10.10 Operating System. Once the uninstall has completed successfully, please proceed to the next step.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
Lastly, please click here to download the appropriate Mac OS X 10.10 Full Feature Software and Driver package for you printer. Once the website opens select the Download button on the top left. Once the Download is complete please follow the onscreen steps to reinstall you printer.
Once your printer has been successfully reinstalled, please test the HP Scan functions again. For additional scan information, you may want to refer to : Scanning with the Full Feature HP Software in OS X v10.10 Yosemite
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Hp color laserjet cm1312nfi mfp misprint

Similar Messages

Maybe you are looking for