HP Color LaserJet CM2320fxi MFP - Full Duplex Problem

Hello!
I've got LaserJet CM232 and Win7 (x64). My problem is that when I'm printing for example 4 pages of a document it's printing only in full duplex, so 2 pages printed on both sides. I can't find where can I fix this duplex problem, I'd like to choose manually if it will be printing in full duplex or not. Help me find a solution, please.
Second problem refers to the time of printing. When I print something I have to wait several minutes to print it. Is that a RAM problem? More RAM memory will resolve this problem?
Thanks a lot for your replies! I'd really appreciate any help!
Best regards,
Kuba
Sorry for my English.

Hi Leela,
You may get the details from below HP link
http://h22168.www2.hp.com/us/en/partners/sap/drivers-for-sap-printing.aspx
HP Color LaserJet CM2320n
4.5A & higher
ZHPLJCM1
Hope this helps.
Regards,
Deepak Kori

Similar Messages

SAP Device typr for HP Color LaserJet CM2320fxi MFP

Hi Experts,
What would be the best suited SAP device type for HP Color LaserJet CM2320fxi MFP?
Regards,
Leela.

Hi Leela,
You may get the details from below HP link
http://h22168.www2.hp.com/us/en/partners/sap/drivers-for-sap-printing.aspx
HP Color LaserJet CM2320n
4.5A & higher
ZHPLJCM1
Hope this helps.
Regards,
Deepak Kori

Color LaserJet CM1015 mfp photo printing problem

I am running a Color LaserJet CM1015 mfp utilizing only HP print cartridges and HP Color Laser Photo Paper, glossy, yet I cannot seem to get a decent photo to print. There is always a black smear or two on the front of the printed page. It prints black and white and color just fine on plain paper but I cannot get a decent print on glossy. This has happened since day one so I don't think it's a dirty print roller,,etc. issue.
Thanks for any ideas!
Michael

Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Undesirable and random GET_CONFIG pages printing from HP Color LaserJet CM2320fxi

An HP Color LaserJet CM2320fxi MFP is printing at what seems as random times two pages. The first page is a GET_CONFIG page and the second page is a two line page of random giberish characters much like the Windings font.
Error logs on the printer don't reveal anything is wrong. It apears that the printer is not aware of these printing events or is not recording them in the logs.
Something similar to this has been encountered and was a result of bad memory or a corrupted firmware load.
This sort of behavior was found posted online in a very brief message on HP's site. Different model of course. http://h30499.www3.hp.com/t5/Printers-LaserJet/get-config-pages-on-models-CP2025/td-p/1095046 The problem apeared not to be resolved.
I dislike the event log of these printers. It doesn't define datetime stamp of the events.
Copied event log:
Number Code Page
8 54.2500 2606
7 54.2500 2598
6 13.0000 2324
5 13.0000 2264
4 13.0000 1503
3 13.0000 888
2 13.0000 812
1 54.2100 0
The number of events with these symptoms seem pretty sparse. At least those that are reported. http://h30434.www3.hp.com/t5/Other-printing-questions/CM2320fxi-Locks-up-when-printing-from-Ubuntu-9...
Also, the error 54.xxxx doesn't appear to be documented which makes identifying the problem rather difficult.
The "Get_Config" occurrences were taking place shortly after the scheduled calibration process occurred. This was discovered by chance when i just happened to walk by and heard the printer spin up and watched it give birth to the get_config pages. Almost like it was trying to communicate with me.. Perhapse I need to "get_config". LOL
As a last resort I reset the NVRAM. The reset of the NVRAM didn't resolve the problem. There is not enough information available from HP to find a resolution to this problem. This is an attempt to open up a support request with HP or knowledeable HP guru types via this forum.
Suggestions other than that of watching and reenacting Office Space are welcome.

Phillip -- that did seem to work. Thanks!
One thing of note, after sleuthing it out a bit more, I realized that this happened after I was prompted by Apple's Software update to update the driver to version 1.1.1 (I think that was the number). that update seems to have broken Acrobat, so returning to the one on the Adobe site restores the functionality.
Perhaps this will be an alert to others not to install the Apple driver when prompted, though it's easy to let that slip by.
Randy

HP Color laserJet CM1015 MFP printing problem

Till now my HP Color laserJet CM1015 MFP printer was working perfectly and suddenly prints miss aligned colors. Each color prints a little bit below another. I uninstalled printer’s software and reinstalled again but it didn’t help. There is no error messages. Printer’s alignment didn’t help either. Can anyone help me with this problem?
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Can't install HP Color LaserJet CM1312nfi MFP at notebook HP Pavilion

I bought new notebook HP Pavilion 13-a051sr with Windows 8.1 (x64) onboard.
I'm trying to install HP Scan.
While installing all-in-one HP Color LaserJet CM1312nfi MFP using "CM1312series-win7-full-solution-AM-EMEA1-v5.1.exe" can not get after the dialog window "Locating the printer". Printer could not be found even if I write down printer' IP-address. The latest printer firmware is already installed. Firewall is disabled, antivirus is closed.
I installed printer without any problems using it IP-address. What can I do in order to install scanner module?

HP Print Drivers

Hp color laserjet cm1017 mfp

hp color laserjet cm1017 mfp
software

Hi,
You may install the HP UPD for printing functionality:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=1846084&swItemId=ds_99374_10&swEnvOid=413...
A Full Feature software for scanning is not available, however you may use the Windows Vista software as a workaround.
If you would like scan capabilties follow these steps insead the UPD driver above.
To get scan capabilities follow these steps:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03506225
The software for Windows Vista can be downloaded from the following link:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=1846084&swItemId=ly_51851_1&swEnvOid=2100
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Doesn't feed paper. color laserjet pro mfp m177fw

I just bought the Color Laserjet Pro MFP M177fw. I removed all the packing as instructed in the installation guide.
While initializing the printer makes a strange noise. When I try to print it gives me a message to load paper. No matter how much paper I load in tray 1 it gives me the same message. I removed the paper and tray 1. Then using a torch I looked in the bin and I don't even see the white metallic rod moving when I give a print command. I suspect that there is something stopping the metalic rod from rotating. I see two black clips on both ends of the rod. Manual didn't mention it but was I suppose to take them out? Or there is another problem?
Need help.
Thanks
FKK

Hi @fkk ,
I read your post and see that the new printer is initializing and the printer makes a strange noise. You are also getting the message to "load paper". I would really like to be able to help you resolve this issue.
It sounds like there might be some more packing material inside the printer. Please check and remove any packaging material inside the printer. Here is a document for Setting Up the Printer Hardware for HP Color LaserJet Pro M177fw MFP Printers.
Disconnect the USB/Network/FAX and power the printer on Standalone.
Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
Try and update the printer's firmware. HP Color LaserJet Pro MFP M177fw.
Please check your private messages for additional steps to try.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet/Wireless)
If you appreciate my efforts, please click the Thumbs up button below.
Thank You. I look forward to hearing from you.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Software for HP Color LaserJet CM1312nfi MFP is not currently available from the Software Update server.

I recently upgraded to Mountain Lion, and found that I could no longer print to my HP CM1312nfi.
This is usually a problem with HP at every upgrade, but this time, they appear to have offloaded the driver download process to Apple.
My printer is connected wirelessly through a time capsule by IP address—the physical, not the virtual, e.g: 169.254.xx.xx instead of 10.0.1.x.
When I try to download the driver by bonjour or IP, I get the following error message:
Can't install the software for the Hewlett-Packard HP Color LaserJet CM1312nfi MFP because it is not currently available from the Software Update server.
Is this truly a Software Update server error, and if so, any clue when it will be resolved?
I am able to print with the generic driver as of now, but fax and scan capabilites are gone. The add fax dialog lists no devices.
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?
Thanks for your time and attention.

Of course, once I posted this, I tried again and downloaded the driver without issue.
My second question still stands, however:
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?

Color LaserJet Pro MFP M176n installed but not printing

Hello Everyone,
I have problem with my printer Color LaserJet Pro MFP M176n.
at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
Please help......
- Windows is windows XP 32bit
- Printer name Color LaserJet Pro MFP M176n PCLms
Thanks
I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will not print but when run Scan doctor it will print on enternal print .....
Wael Hilal

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Hp color laserjet pro mfp m177fw (Cant open SCANNER on computer)

Hi there,
I am using a desktop 27 inch Mac with OS X Yosemite 10.10.1
When I go to system preferences and click on printers/scanners I can see my mfp m177fw laserjet printer (wirelessly connected fine). But unlike on my Macbook Pro laptop on my desktop there is no SCANNER option to open up? Thus I am unable to scan from the printer to this desktop. I have the latest HP driver installed on the desktop computer for my m177fw printer.
Any ideas? Any help would be greatly appreciated
thanks!
Simon

Hello @Simonjayh,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the scan issue that you're experiencing since installing your HP Color LaserJet Pro MFP M177fw on your Mac OS X 10.10 computer. Can I please have you run through the steps below to get this product functioning properly again for you.
Step 1: Uninstall Drivers:
First, can I please have you click here and run through the steps provided to Reset the Print System on your Mac OS X 10.10 computer. Please refer to the section under 'Resetting the printing system in OS X Lion' as the steps are the same for your Mac OS X 10.10 Operating System. Resetting the Print System will remove every printer from your Print & Scan window on your computer. However, this does not uninstall the devices. Therefore, should you use other printers on your Mac OS X 10.10 computer simply ensure that they are plugged in with a USB Cable or Network connected and add (+) them back in. Do not add your HP Laserjet printer back in at this time.
Next, please click here to access the steps on how to properly uninstall the Software and Driver Package for your printer. Once the website opens select the dropdown for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for your Mac OS X 10.10 Operating System. Once the uninstall has completed successfully, please proceed to the next step.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
Lastly, please click here to download the appropriate Mac OS X 10.10 Full Feature Software and Driver package for you printer. Once the website opens select the Download button on the top left. Once the Download is complete please follow the onscreen steps to reinstall you printer.
Once your printer has been successfully reinstalled, please test the HP Scan functions again. For additional scan information, you may want to refer to : Scanning with the Full Feature HP Software in OS X v10.10 Yosemite
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Color Laserjet PRO MFP M177FW Cannot connect to web services

I bought a HP Color Laserjet PRO MFP M177FW today and I set up it. It can print and scan over wireless network. However, It cannot connect to web services correctly. I set the DNS numbers with google DNS addresses. I changed its IP address with manually. The IP address is unique. Normally It doesn't enable/remove webservices. But when I restart it, it can do for few minutes. It can take an e-mail address but It doesn't print any information sheet. When I try to print a sheet It says "Connection Problem" at first few minutes and later it says "Connecting"and it waits, there is no error message. What am I suppossed to do? Please help me.
This question was solved.
View Solution.

Hello rasitbolukcu,
Welcome to the HP Support forums. I understand that you are having difficulties enabling the web services for your Laserjet Pro MFP M177fw printer.
I appreciate all the information you gave me, it makes it much easier to assist you with the troubleshooting. I have included the Getting the Latest Firmware and Product Updates document. It will walk you through ensuring the printer has the latest firmware. Once you have updated the printer, please try to enable the web services again.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Color LaserJet Pro MFP M177fw Scanning

I bought and jsut setup an HP Color LaserJet Pro MFP M177fw.
We are a Mac household, and we connect via wireless to the printer, which works great.
My issue is scanning. On the little screen on the printer, I can copy, print and even fax. No option for scanning. There is some bullsh*t app that I've had to download via HP called Readiris, which is useless. There is no apparent way to initiate a scan via this app.
So I've bought a multifunction printer that doesn't scan. Any help?

It doesn't scan?!
Below is the text from the first page of the first link one clicks on about this printer. How _on earth_ is one supposed to deduce pre-purchase that it doesn't scan from the main menu? Argh. As an HP employee myself, this is aggravating in the extreme.
Ok, venting aside, this link <http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03967506#N229> is not offering a solution.
I am running OSX 10.9.1. I am unable to find the Full Driver to donwload in order to connect to this printer in a manner that would enable any of the 3 methods of scanning (Via Preview, Image Capture, etc.) to work. Can you please provide a link to the Full Driver for this MFP M177fw for Mac OSX 10.9? Thanks.
*** Start copied text from online website on HP printer ***
This affordable HP Color LaserJet Pro MFP brings vibrant color printing
in-house, and boosts productivity with Ethernet connectivity. Enable easy
printing at work, home, or on the go with mobile printing features.1
Print speed:4
Black: Up to 17 ppm; Color: Up to 4 ppm
Scan resolution: Up to 1200 x 1200 dpi (hardware); Up to 1200 x 1200 dpi
(optical)
Copy resolution: Black (text): Up to 300 x 300 dpi; Black (graphics): Up to
400 x 600 dpi; Color (text and graphics): Up to 300 x 300 dpi
Display: 3.0" LCD (color graphics)
Standard connectivity: Hi-Speed USB 2.0 port; built-in Fast Ethernet
10/100Base-TX network port; Wireless 802.11b/g/n
Duty cycle:5
Up to 20,000 pages

HP Color LaserJet Pro MFP M177fw screen frozen on hp logo and energy star icon

My HP Color LaserJet Pro MFP M177fw screen is frozen on hp logo and energy star icon. It has only printed the test page, and will not print otherwise. I have tried unplugging for 60 seconds, and even uninstalled it and reinstalled it with the latest download - still no change. None of the other icons outside the screen work either (home, help, etc.) about all i can do is turn it off and on. Also, I obviously cannot make copies etc since I cannot access any of the functions. Please help! and thanks in advance!

Hi , I read your post and see that the printer is frozen on the HP Logo and Energy Star Icon. I would really like to be able to help you resolve this issue.
I have provided some steps to try to see if we can resolve this issue. Disconnect the USB/Network/FAX and power the printer on Standalone. Check and remove any packaging material inside the printer and toner. Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation. If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord. Update the printer's firmware, make sure you run this through a USB connection. It may not detect the printer in this error state though. Software and Drivers. Select Option 2 and wait for the page to load and then select the link for firmware. I can send a private message with some another step to try.
In the forum beside your handle name just click on the envelope to view it. How is the printer connected? (USB/Ethernet/Wireless) Please let me know the outcome. Have a nice day!
Thank You.

New HP color laserjet pro mfp supply low

I just setup a new HP color laserjet pro mfp and it says the cartridge supply is low and won't print.

Hi @PamJones1 ,
I see that you are getting a "Low Supply", error message. I would like to help you out.
Make sure all the packing material is removed from the toner and inside the printer.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
How is the printer connected? (USB/Ethernet/Wireless)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color LaserJet CM2320fxi MFP - Full Duplex Problem

Similar Messages

Maybe you are looking for