HP Color LaserJet CP1518ni STOPPED WORKING!

Will the print driver for HP Color LaserJet CP151ni be included with the MAC OS X 10.6 updates anytime soon? I just bought this printer two months and what a waste if it will not be supported by the updated OS. Really disappointed! Need to print....!

Never mind. Just realized that it was a network issue. Was able to use the included driver with the 10.6 OS (CP1510 series)

Similar Messages

[HP Color LaserJet CP1518ni] Stopped printing black ink documents when Magenta toner finished

Hi there,
I have a HP Color LaserJet CP1518ni.
I just printed about 200 pages of black ink documentation. The black ink cartridge is still about 38% full.
Although none of these printouts involved colour, the printer started flashing the message: "Replace magenta cartridge".
Since then, it would no longer print. Again, I am only attempting to print black ink docs, and I even tried turning off the colour print option to no avail.
The printer queue on my macbook shows the doc as 'printing' and 'sending', and then it disappears, with nothing happening on the printer itself.
If I push the 'X' button on the printer, it says 'cancelling print' or something like that.
Is there any way around the problem of the printer not printing anything once one of its cartridges runs to empty, even though the printjob does not need that colour cartridge?
Thank you!
Steve

How can I find the Toolbox FX on Windows 7 Professional? I can only find information about Windows XP and Windows Vista. When I go to my Start button, and go to All Programs , there is no HP option or folder;therefore,I can't find the Toolbox FX.
My printer ran out of magenta toner, but all I want to do is print in black ink (which I have plenty of).
Can anyone please help me?

HP Color Laserjet printer stopped working after 10.4.10 upgrade

I upgraded other night to 10.4.10 and I'm now unable to print to my USB connected HP Color Laserjet 3500 printer. Anyone have any idea what might be the cause and how to fix it?
FYI, I already tried reinstalling the driver and fix the permission but no luck.

Hello,
Same problem here, with a HP aio 3015.
Does anyone have any ideas?
C.

HP Color LaserJet CP1518ni - Network connect on Windows 7 64-bit operating system.

For a temporary fix, I've connect an HP Color LaserJet CP1518ni for network use by my department. The printer is printer over the network, but it is not printing in color - just black and white/grayscale. The demo page prints in color, but nothing sent over the network will print in color. Is there a fix for this?

Hello SoonerGirl, and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Hp color laserjet cp1518ni color does not align???

I recently posted at the beginning of the month saying I was having problems with my hp color laserjet cp1518ni and the whole left side printing blurry. After cleaning the rollers, running it through the cleaning mode, restoring the defaults and calibrating the colors, it miraculously worked.
But less than a month into the fix and I am once again having problems. I have done all of the following (I have windows vista 64bit):
*updated firmware and confirmed that it is updated to most current version 20120110
*restarted computer
*turned off printer - more than once
*disconnected printer - more than once
*restored defaults - more than once
*calibrated color - more than once
*run it through the cleaning mode - more than once
I have taken each toner cartridge out and carefully placed them back in again making sure they were firmly in place.
My husband has tried connecting it to his computer and printing it, but has gotten the same results.
I was trying to print out a job when I noticed that the color was horribly off from what was on my computer screen. Since I was 5 prints away from needing to change the cyan cartridge, I changed it, thinking this would fix the color. Not only did it not fix the color, but that's when the alignment problems started happening. I am so completely frustrated. It is ridiculous to have this kind of problems with a printer every time you try to print and I've spent the last 3 hours fighting with it.
I am absolutely, without a doubt, certain it is the printer. I don't know what it is, with the printer, so if anyone has any advice, I would greatly appreciate it. I just opened a 3 pack of toner (to put the cyan in) so now not only can I not use the printer, but I am out money for the other 2 toners.
The reason I know it is the printer, is because I finally I printed the same exact piece I had been printing on the hp color laserjet cp1518ni that looked horrible in both color and color alignment, onto a Canon MG6120 inkjet. The color was exactly as it appeared on my computer screen and there were no problems with misalignment. I just prefer to do my jobs on laserjet printing, so this is frustrating to have a large, expensive doorstop in my computer room.
Any help is much appreciated.

I wanted to add one more thing, as I was looking through the Resolving Print Quality Issues page
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01691481&tmp_task=solveCategory&cc=us&dlc=en&lc...
I have printed out a Diagnostics Report and it's obvious that there is a problem. Under Solution #11, it tells you how to
Identify and replace the problem print cartridge
Because it allows you to print and see:
The page prints five bands of color, which are divided into four overlapping sections. By examining each section, you can isolate the problem to a particular print cartridge.
I have done a search on my computer for:
HP Color LaserJet CP1510 Series ToolboxFX and it does not come up. I am able to do everything through the printer itself (run the cleaning mode, etc), but as far as finding anything on my computer under a folder, there doesn't appear to be anything.
I'd like to be able to print out these pages so that I can see which colors are giving me problems. Is there a way to do that from the printer?
Thank you!

I can't change the display language on my HP Color LaserJet CP1518ni

I have a HP Color LaserJet CP1518ni printer that I inherited from an employee who is no longer at the company. The display screen on the printer is not showing in English, it's in some language I do not recognize (and neither does anyone else). I want to change the display language to English but the manual only shows you how to do that on the display, which I cannot read because it's not in English, hence my dilemma. Does anyone know of a way to change the display language through the computer?
Thanks

InventoryLady,
Yes that is what I did. I do not know the language that it is currently set at, so the recommendations were from using the front panel menu. The OK button is the OK button on the front panel, that would not be in another language, it is the button in between the left and right arrow- See image below #6:
Once you have hit the OK button, you can complete the steps in my earlier recommendation. Again because I do not know which language it is currently set at, I am guiding you the best I can. As for selecting the English language, I suggest using Google Translate to find out which language it is currently set at and see what their word for English is.
If you have any more questions, please let me know.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Color Laserjet CP1518ni color alignment problem

Hi, We bought an Hp Color Laserjet CP1518ni printer about 6 months ago, It worked fine until recently, when the colors started printing out of alignment. We tried calibrating and we updated the firmware to the latest one available on HP's website. This did not help. We contacted the supplier we bought it from, since it is still under warranty, but they told us to contact HP directly.
What should we do now?

I have the same problem. Very disappointed in HP

HP Color LaserJet CP1518ni & Windows 7 via network

I have a HP Color LaserJet CP1518ni connected to the network, not via a USB cable. How to I setup this printer so I can print to it from my WIndows 7 machine? Will HP be coming out with anything other than the Universal Print Drivers for this printer? If so, when?

The full feature download for your printer supporting windows 7 will be available for your product in late January 2010.
While I am an HP employee, I am not a expert on all our products. When I offer advice, I'm not speaking for HP.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

HP Color LaserJet CP1518ni toolbox error

HP Color LaserJet CP1518ni, when I try to open the toolbox, I get an error message, "HP ToolboxFX has encountered an error and can not recover. Please restart HP Toolbox FX, or restart you PC." I have restarted my PC and it hasn't changed the situation. I don't know how to restart the toolbox as it suggests. How is this done?

I have the same problem. Have you found a solution? My printer is LAN-attached. My OS is Windows Vista.

Can I fix the alignment problems my Color LaserJet CP1518ni is having? The red does not line up.

Can I fix the alignment problems my Color LaserJet CP1518ni is having? The red does not line up. I have installed the latest updates, etc. Calibrating does not help. The printer is only a few years old. What gives?
This question was solved.
View Solution.

Please be aware that this forum is a peer to peer support forum, it is not a direct link to HP support.
I have a similar issue with a Laserjet cp1525nw, it was mostly corrected by removing and reseating the toner cartridges.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Laserjet p1505 stopped working

I have a laserjet p1505 that stopped working on my pc (window vista ultimate, 32 bit). When I check the printer queue, it shows the document is waiting to print, but nothing happens.
I checked and switched the usb and connections, deleted and reinstalled the drivers. Eventually (and because it had to be done anyway), I reformatted my hard drive and once again reinstalled the software from scratch. Again, the same problem. Interestingly, when I connect my laptop (same operating system) directly to the printer, it works.
Any suggestions?
Thanks,
Kathy

I would like to clarify that you have 2 computer, the same OS, one is PC and another is the laptop, you installed the same driver on both of them, via the same kind of connection - USB connection, but PC doesn't work,, and the laptop works. Is it the problem you are facing now? If it is the case, I suspect that issue is related to your PC itself.
To help your diagnostic this issue, I suggest that you can install the PDU (printing diagnostic utility) on your PC to do some troubleshooting. You can get the tool from P1505's product page:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-69712-2&lc=en&dlc=en&cc=us&...
Hope it helps.
I am an employee of HP but I only speak for myself and not for the company.

Hp laserjet 2605 stop working

Hi all... After one of latest upgrades (I don't know wich exactly), I'm unable to print with my HP Color Laserjet 2605dn, as a network printer. I tryed to reinstall hplip but nothing. I tryed to remove the printer (I use only cups web interface to admin printers) and add a new printer. All fine, but when I clic on printer model and "add printer" button receive this error: "Unable to copy PPD file!", and printer don't add.
Edit: Tryed with success to add printer with a separate ppd file (extracting from cups folder), but I don't be able to set options of the printer; the cups error is: "Error: Missing value string"
Cups version 1.3.8
Hplip version 2.8.2-2
Thanks in advance for your help.
Silvio.
Last edited by SilvioTO (2008-07-25 22:27:03)

A piece of cups error log when I adding a printer...
I [29/Jul/2008:10:22:05 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=6299)
I [29/Jul/2008:10:22:10 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6303)
I [29/Jul/2008:10:22:22 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6310)
I [29/Jul/2008:10:22:22 +0200] Started "/usr/lib/cups/daemon/cups-deviced" (pid=6311)
I [29/Jul/2008:10:22:34 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6332)
I [29/Jul/2008:10:22:41 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6336)
I [29/Jul/2008:10:22:41 +0200] Started "/usr/lib/cups/daemon/cups-driverd" (pid=6337)
I [29/Jul/2008:10:22:48 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6345)
I [29/Jul/2008:10:22:48 +0200] Started "/usr/lib/cups/daemon/cups-driverd" (pid=6346)
I [29/Jul/2008:10:23:06 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6360)
E [29/Jul/2008:10:23:06 +0200] CUPS-Add-Modify-Printer: Unauthorized
I [29/Jul/2008:10:23:13 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6364)
E [29/Jul/2008:10:23:13 +0200] CUPS-Add-Modify-Printer: Unauthorized
I [29/Jul/2008:10:23:13 +0200] Setting hp_color_laserjet device-uri to "socket://192.168.1.90:9100" (was "file:/dev/null".)
I [29/Jul/2008:10:23:13 +0200] Setting hp_color_laserjet printer-is-accepting-jobs to 1 (was 0.)
I [29/Jul/2008:10:23:13 +0200] Setting hp_color_laserjet printer-state to 3 (was 5.)
I [29/Jul/2008:10:23:19 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6369)

"Out of Memory" message from hp color laserjet cp1518ni

While printing an 8.5x11 sheet of bookmarkers (5 on a sheet), the first page prints, the second page comes out blank with a message in the top left hand corner: Out of memory. Turn machine off and then. And It stops printing all together. HELP!!!!!! I have had problem after problem with this machine. I want to get rid of it, but it cost me #$384 and I haven't gotten 1/4 of usage or production.

Answering your questions... MS Pub is the most graphics rich program I use, however I do print quite a bit of full color 8x10 .jpg/.bmp/.tiff/et.al. photos from programs such as Word without any issue. Most of the graphics printed with Pub are Raster graphics if that makes any difference. Notepad/Wordpad, obviously being text based, never create an issue. They always print. In fact whenever I want to conduct a printer test, I send it a notepad text file. When I get the "Low Memory" message, it will NOT print. Period~! Restarting, rebooting, nothing will get it to print a file if the file shows up as too large. Knowing all this, any problematic file which will not print on the CP1518ni, will ALWAYS print fine if I switch the job to our Office Jet Pro L7555~! Back to the memory... if it really is memory, WHY? In light the L7555 works fine. If I need memory, could you provide specifics about the memory? Thanks again, ~Michael

HP Color LaserJet CP1518ni - Colour Alignment Issue

I'm having an issue with the alignment of the different colours with my HP CP1518ni printer. Basically the colours don't really print in the same spot, like the Red(Magenta) printing is never aligned with the Black / Yellow / Blue(Cyan) (so I can have Red text with a Black/Yellow shadow 0.5-1 mm below or Blue text with a red shadow 0.5-1 mm above for example).
Troubleshooting always just gets me to calibrate, but I've calibrated many, many times over many months, and it doesn't help.
Does anyone know of any other solutions? Or should I just buy a new Magenta cartridge and see what happens?
My cartridges are:
Magenta - CB543a
Cyan - CB541a
Yellow - CB542a
Black - CB540a
This question was solved.
View Solution.

Make sure you update to the latest Firmware. HP just recently released a newer version which as helped with a more concise callibration with the color plane alignment. Many folks have reported these issues resolved after running the update.
The XP update (english) can be found here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=34224...
Though I work for HP, My posts express MY opinion, and not those of HP.

My HP Laserjet 1200 stopped working I have downloaded and installed the pcl5 x64 5.3.1 driver.

I have run the troubleshooting several times and there are no issues found, yet every time I try to print
I get Error in the print que. Anyone know of a way to actually see the error message?
This was the default printer for this laptop and it has worked fine for years then today it just stopped.

Hi smurfie407,
Welcome to Apple Support Communities.
Try running through the troubleshooting tips in the article linked below, they should help you resolve the communication issue between your iMac and LaserJet printer.
Troubleshooting printer issues in OS X - Apple Support
Take care,
-Jason

HP Color LaserJet CP1518ni STOPPED WORKING!

Similar Messages

Maybe you are looking for