HP Color LaserJet CP3525n Printer

Hey
My HP Color LaserJet CP3525n is starting to make a lot of noise when its printing and warming up. And on the prints is there white stripes.
What can i do ?

My assumption is you want to connect the printer to a wireless access point and not with a hardwired cable. If so you can, but it is pricey. The printer has a EIO hardware slot and you can purchase a EIO jet direct card. See the link below. Now if you just want wireless devices to attach to the printer where the printer is hardwired to a switch or router you just add the printer using the ip address of the printer to each wireless device. http://www.amazon.com/J8007G-HP-Jetdirect-Wireless-Internal/dp/B001AM52SC

Similar Messages

Printing problem with HP Color Laserjet 3000 printer

I am using HP Color Laserjet 3000 printer, it is configured in SAP ECC6 with SPAD with device type "HPLJ4 : HP Laserjet 4 series PCL and access method = L: Print Locally Using LP
At HPUX level printer in configured with proper driver also.
When I print from SAP, I get following error
"Invalid option, Please refer to MAN page for valid options" as attached
Other then above line , nothing else comes
Please help,
Al Mamun

Hi,
Make a try using the device type HKSAPWIN and the access method is front end prinitng.
Also make sure that you are able to take the print out using the os(printer should be configured at os level first).
Regards,
Vamshi.

HT1338 i can't attach my hp color laserjet cp1215 printer.

i can't attach my hp color laserjet cp1215 printer.

Adhvaresh,
"attach" is a word we usually use for plugging in cables - but I don't think that is what you mean.
If you want a driver for that model laserjet, I suggest you use the foo2hp set of drivers. Install Foomatic and ghostscript from here:
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/foomat ic
Then, install foo2HP from:
http://foo2hp.rkkda.com/

HP Color LaserJet 1600 Printer

I really love my HP Color LaserJet 1600 printer but haven't been able to successfully install it in my brand new MacBook Air 1.7 despite several attempts.
I have downloaded the correct Firmware Upgrade 20120928 v2.4 from HP Drivers web page. Unlocked RFU to ON position and installed the firmware. Added HP Color LaserJet 1600 Printer via USB, as required and my MacBook correctly identifies it as such. Though the driver I have chosen is HP Color LaserJet 2605 since the one for 1600 is not available in the database. The printer responds positively during the upgrade but later does not print. I can see the print command being transmitted to the printer but it stays dead.
Please help and let me know stepwise how to do it correctly.

Just upgraded my printer to HP Color LaserJet Pro 200 M251nw.... Problem solved.

Bad photo prints on HP Color LaserJet CP5225dn Printer

Hey all,
Having an issue outputting photos on my new HP Color LaserJet P5225dn printer from Adobe products. Am curious if anyone else might have run across the same issue and possibly found a solution. Here's the background information...
Running Windows 8.1 Pro.
HP Envy Phoenix w/Intel core i7-4770 CPU @ 3.40 GHz
32 GB RAM
2TB Raid 0 HD
NVIDIA GeForce GT 640
Spyder-profiled HP Pavilion 25xi monitors (dual setup)
Running Adobe Creative Cloud (latest builds--issue present in prior versions, too).
Using HP Universal Print Driver PS (latest version--only option on Windows 8), but have tried PCL 4 and 5 drivers as well.
When printing from Adobe products, any photo seems to print without the yellow color. Color swatches and vector files print correctly. This issue seems to only apply to raster images--greens print blue, browns print purple, oranges print magenta. I have had HP support out to examine hardware of printer and everything checks out.
I have tried every combination of ICC profile, paper setting imaginable. Have tried printing as CMYK and RGB. Have reset preferences in Adobe software. Color issues are present in InDesign, Photoshop, and Illustrator, and the images print consistently off in all products (is purple in INDD is also purple in PSD, etc.). I have reset printer to defaults. I have tried removing color management and printing. I have tried printer diagnostics. I have tried having the printer manage color. I have tried having the application manage color. Everything prints consistently wrong.
I've updated video drivers, searched for ICC profiles specific to the printer, recalibrated monitors, no dice. Funny thing is that when you take that same file and send it to another printer, it prints accurately.
Any ideas for troubleshooting are much appreciated. Any solutions would be fantastic.
Matt

Yeah, tried printing from PDF and image issues persist. I'm not sure what's going on if everything checks out from hardware standpoint. Appreciate your suggestions though.
Thumbs up!
Matt Schroeder
Chief Creative Monkey
Big Opposable Thumb
O: (719) 373-1887
M: (719) 761-9672
"Intelligent Design for Evolved Marketing."
Sent from my mobile device. Please excuse brevity and typos.

Hp color LaserJet 3500n printer driver

I just got a new iMac and have marveled at how EASY everything's been ... so far. Of course, Murphy just couldn't resist and I can't get my oldie but goodie hp color LaserJet 3500n printer to print.
I clicked + in the Print & Fax System Preferences. It found the printer. Then, the automatic driver selector chose hp color LaserJet 2.0.2. Well, that didn't work.
I went to the hp site and the driver they have is OLD, but I tried it anyway. No luck.
Any ideas short of a new printer?

Try the three-part hpijs driver from here:
http://www.linuxfoundation.org/en/OpenPrinting/macosx

HP Color LaserJet CP2025 Printing Issue

HP Color LaserJet CP2025 - prints only in B&W - how do I set the printer to print in color?
The latest driver has been installed.

Hi Yahootie,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP Color LaserJet CP1215 Printer drivers location

Where on my hard drive has the ljcP1215-HB-pnp-win32-en.exe file from the HP Color LaserJet CP1215 Printer support page installed the needed drivers?

Hi @zenny ,
I can help you with locating the drivers on the computer.
Here are the instructions for running the Plug and Play drivers.
Click the Download only button and save this file.
Double click on the downloaded file. The self-extracting process will appear.
Click to accept the terms in the license agreement. Click Next.
Driver installation begins. Driver files are pre-installed during this process.
A screen pops up to prompt to connect the USB cable. Insert the USB cable.
Device is connected, waiting for PnP to finish installing driver.
Click Finish to complete software installation.
They extract to the temp folder on the computer.
Press the Windows key and R at the same time, to show the run command line.Type in %temp%. The folder should start with 7z.....
Depending which operating system you are using, I would suggest downloading the Full Feature Software and Drivers if you are still having issues with the Plug and Play drivers.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color LaserJet 2550ln printer displaying error massage

I was trying to print a page of tickets (6) containing graphics, but my hp color laserjet 2550ln printer printed a page with the following message:
ERROR: limitcheck
OFFENDING COMMAND: showpage
STACK:
(r)
( Sys / Start )
( Sys / Start )

Found this on the discussion posted 06-03-2010 01:55 PM It worked for me.
I just went through this fix yesterday. I can't remember where I found it on hp.com, though. Here it is:
Turn printer on.
On your printer, press the Menu button
Press 2 (on the fax dial pad)
Press the right arrow (next to Enter button) until you arrive at "High Speed USB.
Press Enter
Press right arrow to select "Off."
Press Enter.
Press Enter again.
Printer will then reboot. I used to get this error occasionally with Windows XP. I wish I would have taken the time to fix this a long time ago!

HP Color LaserJet CP2025 Printer - Vertical Yellow Band printing on every page

For the last several weeks whenever I print from my HP Color LaserJet CP2025 Printer the pages print with a vertical yellow band on the right hand side of each page. I checked the supplies status and it says each ink cartridge has plenty of ink left so I'm at a loss as to what could be causing this yellow band. I'm wondering if it has something to do with the printer's hardware (inside roller perhaps)?
Any insight would be most appreciated.

Hi there cdyson44, Welcome to the Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My HP Color Laserjet CP3525dn printer is only printing parts of my document in colour.

Hi All
I am having a problem with the office HP Color Laserjet CP3525dn printer. I am a novice and the tech guy we use is on holidays! We are using windows 7 with hardwired connection. The problem is that it is only printing some parts of my documents in colour. Some documents are being printed completely in B & W! Any ideas? Thanks

Hi trixie49,
The link below is to the guided troubleshooting utility. Since this is a commercial LaserJet printer you should also post your question to the second link below.
http://h20584.www2.hp.com/hpgt/guides/select?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3690646&lan...
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP Color LaserJet CP1514n Printer paper jam in tray 2 - How to clear same?

HP Color LaserJet CP1514n Printer
A page was torn in printing. Message: Clear jam in tray 2.
Have been trying to do just that for over 2 hours.
Any hint?

Lets try the following:
You will need access to both front and back of printer
Power off and unplug printer
After printer has cooled down (nothing is hot inside printer), slide out bottom tray
Slide out print cartridge tray. No need to remove cartridges. Be careful not to touch bottom of cartridges.
Open back of printer. Back door is opened by pulling back/away from device using notch at top. Should pop open with little effort.
From back of printer, with flashlight/Smartphone, look for jammed paper.
Be careful for edges. Not a lot of space.
Hope this help you find jammed paper.
I work for HP

HP color laserjet 3500 print blue arrows on right margin

HP color laserjet 3500 print blue arrows on right margin abouti 3 in apart and middle of the page yellow blotches
tried to clean and calibrate nothing changed. dont see any extra blue or yellow toner powerder anywhere.
please help.
does this on test pages and anything eles printed

@dwropp
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

HP Color LaserJet CP2025dn Printer Wired Connectivity and have USB simultaneously?

Hello to all;
Thank you in advance.
I have a HP Color LaserJet CP2025dn Printer.
The question, can I use ethernet connection and have USB simultaneously? Ethernet is faster, right?
Currently, I have the printer connected to network via Ethernet Wired Connectivity through an Apple Aiirport Extreme base station. I have several Mac's all operating under 10.9.1, and two PC's (one is WIN XP, and the other WIN 8.1), which all operate fine with 2008 wired/wireless technology. I know what a dinosour. I am in the process of upgrading the household to current wireless technology with a NetGear AC1900 Nighthawk Smart WiFi Router (Model: R7000), 802.11ac Dual Band Gigabit, with two USB ports ((1) 2.0 and (1) 3.0) . I connected the printer directly into the Netgrar router, and it wouldn't print, ran setup through the Mac and Win computers and still wouldnt pring. One of the reasons that sold me on the Netgear router was the ReadySHARE® USB access—Wirelessly access & share. In order for me to utilize the ReadySHARE® feature is to connect via a USB cable. Sob story, the longest USB cable off the shelf usually 16", and to reach where the printer is now, I need @25-28 feet of cable. Is ther a maximum length of USB that I can use with out suffering loss of speed/functionality?
Again thank you for your time

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
Here is the HP Color LaserJet CP2025 Printer series Support page.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Networking a HP color laserjet 2600n printer on windows 7 (64-bit)?

Hello,
Have an HP Color Laserjet 2600n printer and are running Microsoft Windows 7 (64-bit). I installed >> HP Color LaserJet 2600n Plug and Play Package off of HP website [ http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=446154&p... ]. The drivers work fine if you connect via USB port but unfortunately there's no way to connect via network. Can anyone give me guidance on how to connect the 2006n via a network on windows 7 (64-bit)?
Thanks
This question was solved.
View Solution.

Have you plugged the printer into your router and does it have a proper IP address? If so:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Color LaserJet CP3525n Printer

Similar Messages

Maybe you are looking for