HP Color LaserJet MFP M570dw and HP Web Services

Hi,
I have a HP Color LaserJet MFP M570dw printer and have tried to enable the HP Web Services, but without success.
My printer is configured on a fixed ip-address, with a default gateway and of course with static DNS servers (8.8.8.8 and 8.8.4.4).
Every time when I try to enable the Web Services feature I get the error message "Connection error. Check your internet connection.".
My internet connection is working fine and the printer is able to communicate thru the firewall fine too. When I do some tracing I see the printer communicating to the public ip-address "23.21.172.122" but there is no response comming back. So I assume the problem is external and not related to my internal configuration. I have tested this with a fully opened firewall (allowing all communications from my LAN to the Internet) with exactly the same results. There is no answer comming back from the ip "23.21.172.122".
Also I can't find the HP Color LaserJet MFP M570dw printer in the supported HP ePrint printerlist.
The 400-series is supported, the 500-serie is not mentioned.
But since the webinterface of my HP Color LaserJet MFP M570dw printer is giving me the HP Web Services configuration page, I asumed this type would be supported too...
Does anyone have a clue how to get ePrint working on the HP Color LaserJet MFP M570dw printer?
Is there anyone who got the HP Web Services working on a HP Color LaserJet MFP M570dw printer?
Kind regards,
Rene.
This question was solved.
View Solution.

Hi Rene,
Have you tried updating its firmware version?
The latest firmware should improve the web services connectivity and may help resolving such an issue:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5210913&sp...
Also be sure to follow its steps which may help resolving a connection issue:
• Improvements made for connecting to HP Web Services.
NOTE: After updating from firmware datecode 20121002 to firmware datecode 20121019, if a connection to HP's Web Services cannot be established a Security Reset should be performed. Use the following steps to perform a Security Reset.
1. At the printer's touch screen control panel press the wrench & gear icon (Setup menu) at the top of the touch screen.
2. Using the scroll arrows on the right side, scroll until Network Setup appears then press Network Setup.
3. In the Network Setup menu select Security
4. Using the scroll arrows on the right side, scroll until Reset All Security appears and then press Reset All Security. Allow the reset to complete before attempting to connect to HP's Web Services.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

HP Color LaserJet MFP M476dn - Impossibly slow ethernet

Win7 - 64 bit on typical small office network setup (Comcast internet, Linksys Router, half computers on wifi, half wired).
Upgraded from terrible old Brother multi-function printer.
We print some files from remote desktop (using redirected printers.. as in, the remote desktop session has the ability to print through our computers to our local printer).
Sometimes the files are large (10-20mb).. and the Brother printer sends it right over in about 1 second.
New HP Color LaserJet MFP M476dn goes as slow as you can imagine.. I can sit a watch the printing dialog box and watch it 256kb........512kb........768kb.......... out of 15mb.
I have tried a bunch of combinations of different drivers (PCL5 etc), link speeds on the printer, RAW processor, Port types, and so on, but can't find the right combination..
I should mention that we are using the exact same ethernet cord as the old Brother printer. Also, the HP is set to a Static IP.
Please help!
Thanks,
Eric

I had this exact problem. I've had the printer for about a month and it was very fast at first. I really like the printer, especially the duplex ability. Over the past week or so it became excruciatingly slow. I just finished downloading the new firmware and drivers but before installing them something made me check the Ethernet cable which is plugged into my Airport Extreme 802.11n Gigabit router. It was loose and partially pulled out so I plugged it back in all the way and the printer went back to printing the way it is supposed to.
You might want to give this a try. Perhaps try another Ethernet cable or direct connection via USB if that doesn't work.
Frank

Hp color laserjet mfp 177fw digital fax setup

Dear Folks,
Does hp color laserjet MFP 177 fw supports digital fax ( receive fax to network folders or email without printing both color and black) .please help me in this regard.
Binjack

Hi,The M177fw model do not support recieving faxes digitally to a computer, it only allow a recieved fax to be printed. You may find the Fax smart software features section below, Fax to PC is not a feature of the software for your printer:http://store.hp.com/UKStore/Merch/Product.aspx?id=CZ165A&opt=B19&mastersku=CZ165A&masteropt=B19&sel=BPRN&#merch-tech-specs (Just to compare, below are the same specifications for the M225dw which do offer a such)... Regards,Shlomi

SSO and ABAP Web Services

I am opening this thread on behalf of my colleague Bala regarding SSO and ABAP Web Services.
We have gone through single sign on options and found several options are available within 5.0.
We would like to know the options available for SAP ABAP web services access from a Non-SAP system with user authorization but without Portal/ITS installation.
Also I would like to avoid any hard coding of user id in Non-SAP system .
Could you provide any information.
Thanks,
Bala

We have gone through single sign on options and found several options are available within 5.0.
Tell me what are the several options and what is your Non-SAP system?
without Portal/ITS installation.
ITS is now an integral part of ECC 5.0 system. So would not need a seperate installation, unlike earlier versions.
AB

Front End internal and external web services

Hi all,
Can someone explain the purpose of internal and external web services URL in front end server. what does it do and what is it used for? and why the external traffic goes directly to it and not through reverse proxy?
Thanks,

They're for multiple purposes. Address books, autodiscovery, meeting urls, mobile clients, etc. There are two because they respond slightly differently based on whether the client is internal or external. External traffic should always reach
it through a reverse proxy, that reverse proxy should proxy traffic received on port 443 to port 4443 on your front end pool.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Standard Web Service and Customized Web Services with or without PI?

Hi All,
I want to know how I can use Standard Web Service available in SAP and customized Web Services
without PI Interface?
And what is the best practice to expose services ,via PI Interface or directly?
Thanks in advance!!
Pushkar

This is purely based on your requirement. If you use PI middleware to expose web services, you get standard functionalities such as certificate authentication, logging, message reprocessing for the failed messages etc. If your requirement is so simple, then you might not need PI. In this case you can develop simple webdynpro for abap program to create webservice and expose the webservice in ECC webservice runtime. You can let anyone to consume within your network. other ways like exposing BAPI/RFC as webservice. I would recommend going with PI.

Timestamp Error when calling Encrypt and Signed Web Service

Hello,
I maked one Web Service in the Oracle Service Bus 10gR3 that supports Encryption and Sign, basically inserting (manually) this on WSDL Contract:
This two namespaces:
xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
This Declarations:
<wsp:UsingPolicy Required="true"/>
<input>
<wsp:Policy>
<wsp:PolicyReference URI="policy:Encrypt.xml"/>
</wsp:Policy>
<soap:body use="literal" />
</input>
<wsp:Policy>
<wsp:PolicyReference URI="policy:Sign.xml"/>
</wsp:Policy>
The above declarations was inserted in the correct points inside the WSDL Contract and the Web Service is working correctly.
The Problem is related to Sign.xml declaration, when i insert this declaration:
<wsp:Policy>
<wsp:PolicyReference URI="policy:Sign.xml"/>
</wsp:Policy>
Then, the Web Service shows an error. Following the Request and Resonse (That shows the error):
Request:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ger="http://www.abc.com.br/Service">
<soapenv:Header/>
<soapenv:Body>
<ger:gerarHashSenha>
<arg0>123456</arg0>
</ger:gerarHashSenha>
</soapenv:Body>
</soapenv:Envelope>
Response:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault>
<faultcode>env:Server</faultcode>
*<faultstring>Can not retrieve header: {http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd}Timestamp</faultstring>*
</env:Fault>
</env:Body>
</env:Envelope>
Observation: I was invoking the WebService using the soapUI Tool.
I Tryed change the request to bellow code, but doesn't work:
<soapenv:Envelope xmlns:ger="http://www.abc.com.br/Service" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Header>
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsu:Timestamp wsu:Id="Timestamp-447" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsu:Created>2010-05-27T21:40:55.667Z</wsu:Created>
<wsu:Expires>2010-05-27T21:41:55.667Z</wsu:Expires>
</wsu:Timestamp>
</wsse:Security>
</soapenv:Header>
<soapenv:Body>
<ger:gerarHashSenha>
<arg0>123456</arg0>
</ger:gerarHashSenha>
</soapenv:Body>
</soapenv:Envelope>
Thanks.
Victor Jabur.

someone has any idea ?
Thanks

EBS11i to provide Web services and receive Web services

Our corporate direction is to have all major systems internal has to communicate to each other using web services. No more using pl/sql, dblink, FTP to communicate.
we are using EBS 11i.
1) Is that possible to have our EBS 11i able to receive web service call and make web service call to other systems?
2) Will 'Oracle AS Adapter for Oracle Applications' is the solution for this? is this adapter install at EBS box to receive web service call and make web service call to other systems?

Hi,
WebDynPro Java/ABAP are primarily User Interface technologies. Webservices are faceless (without UI ) components that provide certain functionality. Using UI technologies like WebDynPro Java/ABAP etc, we can build a face( UI ) to the webservices.
DnyPro itself means a screen & WebDynPro is for building web based applciations.
Hope this resolves your question.
Well, if you still want to use it as provider & if you have an existing web-service, the way to do it is, Right click on your WebDynPro ABAP component & select CREATE->Service Call. Build a Custom Controller or use the Component Controller to get the service using service type = Webservice proxy for your webservice. You can use this Component as a Used component in any other webdynpro components & use this to access webservices.
Thanks,
Phani
Edited by: Phani Rajesh Mullapudi on Oct 8, 2009 10:41 PM

Lync control panel and internal web Services

Hi,
In our Lync 2013 deployment for web services we have set override FQDN for internal Web Services asialyncpool.corp.contoso.com and External web services as web.contoso.com. The Control Panel URL has been set to https://admin.contoso.com
When i launch Control panel, in the IE https://admin.contoso.com the control panel opens and but the url get changed to internal web services ie sialyncpool.corp.contoso.com. When i enter https://admin.contoso.com/cscp in the IE it ask for logon
credentials and doen't accept the credentials at all, how many times i may try.

Thanks for the response.
https://admin.contoso.com,
it will redirect to the URL of: https://asialyncpool.corp.contoso.com/cscp -
This is exactly what is happening.
When i use - https://asialyncpool.corp.contoso.com/cscp,
it doesn't accept the credentials, it keep asking for right credentials, when i use Lync control panel, it does accept the credentials.

How to Create and Deploy Web Services Using Oracle 9i JDeveloper

Hi,
My Question is how to create and deploy Web Services using Oracle 9i JDeveloper.Anybody please give me a detailed Reply.Please Reply to [email protected]
Hopr to Hear From you,
Regards,
G Sreekumar

You could use datasources. You should do this in your BC4J Configuration. Then when deploying your applicaiton use the command -installDataSource (from admin.jar) to create the right datasource.
You could probably use the name of your connection + "DS" so you can also use it locally in JDeveloper as JDev seesm to create this automaticly for your Connections.

ANN: Contest open, new tutorial and new Web services software

The OTN Web Services Challenge is now open and accepting entries. Read the details, rules and requirements at:
http://otn.oracle.com/tech/webservices/htdocs/challenge/content.html
You could win a Dell Notebook worth USD$5,000 :-) First 500 real entries (that is one with source code and works) will get an Oracle Press book (my understanding is that it is one on Oracle9iAS).
There are also a number of new things also available on the OTN Web Services Center:
- A new Oracle9i Reports tutorial at:
http://otn.oracle.com/tech/webservices/htdocs/series/reports/content.html
- The Oracle9iAS Containers for J2EE Developer Preview (9.0.3) now supports document style Web Services and asynchronous Web services. Read all the content off the main page in the center:
http://otn.oracle.com/tech/webservices/
- A new paper talking about the Java XML Pack from Sun which Oracle is iterating its Oracle9iAS implementation towards:
http://otn.oracle.com/tech/webservices/htdocs/standards/jax.html
Mike.

Currently the patch is only available on MetaLink (metalink.oracle.com) which requires a support account with Oracle. The patch number is 2367149 - see this post for instructions of how to get it from MetaLink:
Re: Database or Client Level?
Mike.

JDeveloper and Database Web Service Connection

Hi all,
I'm trying to publish a Java class as a web service. However, I'm getting the following error for the sample code below. Please help me out pubish this class as a Web service.
The error:
No methods were selected. Select one or more methods to publish as a web service.
My code is below:
package hr;
import java.sql.Connection;
import java.sql.SQLException;
import oracle.jdbc.pool.OracleDataSource;
import java.sql.Statement;
import java.sql.ResultSet;
import oracle.xml.sql.query.OracleXMLQuery;
import oracle.xml.parser.v2.*;
public class DataHandler {
public DataHandler() {
String jdbcUrl = "jdbc:oracle:thin:@127.0.0.1:1521:orcl";
String userid = "hr";
String password = "mohammed";
Connection conn;
Statement stmt;
ResultSet rset;
String query;
String sqlString;
public void getDBConnection() throws SQLException{
OracleDataSource ds;
ds = new OracleDataSource();
ds.setURL(jdbcUrl);
conn=ds.getConnection(userid,password);
public ResultSet getAllEmployees() throws SQLException{
getDBConnection();
stmt = conn.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE,
ResultSet.CONCUR_READ_ONLY);
query = "SELECT * FROM Employees ORDER BY employee_id";
System.out.println("\nExecuting query: " + query);
rset = stmt.executeQuery(query);
return rset;
}

Dear dvohra16,
Thank you for the great book you're recommended. It's really a powerful tool that makes things much better for me.
I've noticed that you're the author of this book. I'm really honered to discuss with the problems I have and
I'm so lucky to get your responses for my questions.
My current question is based on this book. How do I orchestrate a web service that inserts into an oracle database table and a web service that reads
the contents of that table?
In other words, the first web service inserts some values into a table and the second should read these values.
So, how does BPEL orchestrate these web service such that the output of the first one is the input of the second?
Your assistance is truly appreciated.
Thank you for your time.

Color shift between Ai and the web ... again

Hi there,
Classic problem again ... color never seems to let me rest in peace
Well, I copied colors hex numbers from this palette
http://www.colourlovers.com/palette/2077685/Stargazer
When I fill 5 squares in Illustrator, each one with the palette's colors, the 2nd (#592997) and the 3rd (#7208FE) are showing completely different in Illy (more magenta) than in Chrome (more blue).
I need help here since :
- my screen is calibrated (5 days ago with Spyder3)
- the color profile in Ai is set to sRGB
- the document color mode is set to RGB
- as far as I know, Chrome supports color management & the palette comes from a site about color which I suppose does things right
Is it the same for any of you if you try out ?
Any idea about what's going on ?
Thanks.
(Sorry, it's being late, maybe I'm just tired & dizzy and just cannot see the evidence anymore )

Oh good god !
Did not know that !
I am so used to work with my mac on Safari and here I am on a PC using Chrome & Firefox which were both completely off after checking.
Apparently it is off by default in Firefox too.
I had to go to G. Ballard's website to see that I needed to set the following parameters as such :
gfx.color_management.enablev4 = true
gfx.color_management.mode = 1
And I also found that you can force Chrome to display according to the monitor's profile by using this trick
http://www.binaryturf.com/enable-color-management-google-chrome/
Well, now everything seems ok.
Thanks. I think I need to go to bed now

Issues with Using Data Dashboard and Using Web Service

After running a system for many months it has suddenly decided to not work at all. I am using Data Dashboard to read variables on a host. I'll outline the system here to get a baseline:
I'm running LV 2012 SP1 f5.
I collect data from one Ethernet port and interfact it to another Ethernet port to form a proxy.
I use a fixed IP address from my DSL along with port forwarding/port triggering in my router for data observation and control.
So, what have I done so far?
1. Repaired my original LV 2012 SP1 and tested system.
2. Upgraded to LV 2012 SP1 f5 and tested system.
3. Ran service.msc and checked all the NI services that should be operational. Started and stopped several of them and rebooted computer.
4. Deployed all my SVs (multiple times)
5. Disconnected second Ethernet interface becasue sometimes the variables would deploy to this IP address.
6. Turned off my wireless because sometimes the variables would deploy to this IP address.
7. Checked "Web Server Configuration" "Application Web Server" for correct port number.
8. Checked "Web Services Management" and under "Deployed Web Services" there is one category: SV is marked as running. NOTE!! WebService is NOT listed and this could be a problem
I can use the following to retrieve data&colon; localhost:<port number>/sv/variable. But when I substitute my DSL IP number, I can no longer get any data.
So, what am I missing?
Thanks,
Paul.

Siana,
Thanks for your response.
I haven't touched the NI code in months. It is running on an XP laptop and I have the Windows updates turned off. McAfee is running on it and of course that updates regularily. This laptop is a dedicated machine that I only use for this function, nothing else. I haven't added or subtracted any programs for many months.
There have been no changes to the DSL from me. AT&T is constantly trying to get us to upgrade to U-Verse but we have resisted. All DSL modem and router hardware is the same.
Confusing, huh?

Problem with java and flex web service

Hi,
I have a basic web service written in java using jax ws 2.1
ri. I need to call it from Flex using the WebService class
Annotations for the java web method :
@WebMethod
public void Login(
@WebParam(name="server") String serverURL,
@WebParam(name=AUTHENTICATE_HEADER,header=true,mode=WebParam.Mode.INOUTHolder<Authenticate Header>
authHeader)
When I try and call the service from Flex , it can't find the
login method and attempts to call it fail. If I set the web service
to RPC based using @SOAPBinding , the method is found but then
there are issues with the authentication header.
What do I need to do to get flex web services communicating
succesfully with java ?
Are there are any known compatibility issues ? Or guidelines
for going about this ?
Any help would be appreciated

well Shay,
i've used JDev's tools to developer and to deploy the web service: the war and ear files are automatically generates you to the end of the process.
I have included all the files java and the compiled classes, but I do not have files jar.
But don't works: if i create only one java class with all code inside then it works fine!!
Daniele

HP Color LaserJet MFP M570dw and HP Web Services

Similar Messages

Maybe you are looking for