HP color laserjet pro cm1415 stopped printing on my wifi network.

It used to print fine, then about 2 weeks ago, just stopped. The print job sends OK, but then sits in the queue for a minute or so, and then it says "error". I've removed and re-installed the software, rebooted the routers, computers, and printer, but it didn't help. I also tried Microsoft fix-it utility and HP Print & Scan Doc, but nothing helps. Any ideas?

It sounds like there may be a communication issue with the computer and printer.
Try using the HP Print and Scan Doctor as it is designed to resolve many printing issues. It will try to correct any issues automatically. If it does not, then it will give more information about how to correct the issue.
The link provided also has some information about how to use the tool.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

HP Color LaserJet Pro MFP M177fw Printer always cool-down mode

Hi there, i am also meeting with the same issues like the cooldown mode printing.

Hi , I found something written by that you may find helpful regarding the printer going into cool down mode: I have provided a document with Resolving Control Panel Messages. Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation. Update the printer's firmware. HP Color LaserJet Pro MFP M177fw Drivers. Where is the printer located? (enclosed shelf, desk)How many pages are you printing when you get this message?What is the paper's weight and what kind of paper are you using? If the issue persists, please post back with the answer to the above questions. Thanks.

Color Laserjet Pro 200 MFP Print Menu

When I use my iMac 27 with this printer, I don't see all the print options in the print menu in Preview etc. that are mentioned in the User Guide. No "Color/Quality" options/Advanced etc. to change. I have downloaded and installed the latest drivers from HP. I am using OS X 10.9.4. Am I doing something incorrectly or missing something. The product is working fine otherwise.
This question was solved.
View Solution.

Hi jerryoster,
It sounds to me from your description that you might be using the Mac AirPrint driver instead of the HP driver. I suggest the follow;
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
hen you add the printer, ensure you are using the HP driver, not the AirPrint driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
Please let me know if this resolves the issue. If you require further assistance, let me know which LJ 200 model you have (How Do I Find My Model Number or Product Number?), and if you have downloaded and installed the full feature software and driver from the HP website.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Color LaserJet Pro MFP M177fw How to Scan

I just bout the HP Color LaserJet Pro MFP M177fw printer today and don't know how to use the scanner. I use Windows 8 operating system. Please advise how to use th scanner function. Thanks.

Hi, From page #38 of the manual: Scan by using the HP Scan software (Windows)
Use the HP Scan software to initiate scanning from software on your computer. You can save the scanned image as a file or send it to another software application.
1. Load the document on the scanner glass according to the indicators on the product.
NOTE: For best results, load small-size paper (Letter, A4, or smaller) with the long edge of the paper along the left side of the scanner glass.
2. Click Start, and then click Programs (or All Programs in Windows XP).
3. Click HP, and then select your product.
4. Click HP Scan, select a scanning shortcut, and then adjust the settings if necessary.
5. Click Scan.
NOTE: Click Advanced Settings to gain access to more options.
Click Create New Shortcut to create a customized set of settings and save it in the list of shortcuts. Regards.

Trouble initializing color laserjet Pro MFP M177fw wireless connection

color laserjet Pro MFP M177fw - Printer was working for several months, now it will not print and when you power cycle it just shows initializing... but never finishes. Using wireless network connection to a Windows 7 pc.

Hello,
I have provided the URL for doing a firmware update on the printer, but do it through a USB connection. Since the printer is in a error state though, it might not detect the printer to do the update. HP Color LaserJet Pro MFP M177fw.
Select your operating system, click Submit, click the link for firmware and then click on the Download button.
I have provided some steps to try to see if we can resolve this issue.
Disconnect the USB/Network/FAX and power the printer on Standalone.
Check and remove any packaging material inside the printer and toner.
Do a hard reset to see if that will resolve the issue, if you haven't already.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
I can send a private message with some another step to try.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet/Wireless)
What operating system are you using?
Please let me know the outcome.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Color LaserJet Pro MFP M176n installed but not printing

Hello Everyone,
I have problem with my printer Color LaserJet Pro MFP M176n.
at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
Please help......
- Windows is windows XP 32bit
- Printer name Color LaserJet Pro MFP M176n PCLms
Thanks
I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will not print but when run Scan doctor it will print on enternal print .....
Wael Hilal

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Hp Color Laserjet pro M177fw won't print double sided anymore

Hello. I have a Hp Color Laserjet pro M177fw until about three weeks ago it would print double sided no problems. I have used this printer on my pc and now my mac with no problems previously. I am running a Macbook Pro (less then six months old) which is running 10.10.1 (Yosemite). I attend college and I know at the end of last quarter during finals week (Dec. 15th) I still had the ability to do 2 sided printing. Sometime between then and the new quarter starting last monday I lost the ability to do 2 sided printing. After scouring the internet I have tried everything they suggest:
Uninstalling printer and reinstalling
resetting the printer setting on the mac and then reinstalling printer
resetting the printer settings on mac, rebooting and then reinstalling printer
installing older drivers( hp automatically installs newest drivers even if you use an older driver file)
resetting physical printer to factory default and reconnecting to wireless network.
repairing the disk permissions
The only new software I have installed on the computer in the last three weeks is Adobe Creative Cloud and the printing problem preexisted that installation.

Hi @Arboria9 ,
I see that you are experiencing issues printing two-sided from Yosemite. I would like to help you resolve this issue.
You have pretty much have done all the steps that I would have provided.
Are you still able to print two-sided from the Windows computer?
Are you missing the option to select two-sided printing in the print driver?
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Officejet 6500)
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
How was the printer name listed?
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw. It displays "No AirPrint Printers Found'.

My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw.
It displays "No AirPrint Printers Found."
Same thing for iPhone 5S iOS 8.2.
Both iPhone and printer on the same wifi network.
I tried printing from different applications. AirPrint does not work.
I tried turning off and back on, reset, printing from different applications, ...
iPhone 6 prints through HP Wireless Direct printing.
Sony laptop works via wifi.

Hi mtotonji,
Thank you for using the Apple Support Community. Given the nature of the issues you are describing and your current configuration, you may be better served by reaching out to one of Apple's other available resources for more direct assistance - https://getsupport.apple.com/GetproductgroupList.action
Sincerely,
- Brenden

Color Laserjet Pro M277dw making weird noises when printing

Hello Everyone, At my office we bought the Color Laserjet Pro M277dw printer last week, and since then everytime we print, the printer makes really weird noises. We checked inside but everything inside looks to be okay . Here you have the link with an audio I recorded with the sound it makes. Thank you very much and it would be great if you guys could help us to find a solution! Best, Lorena

Grinding can only mean physical damage to the printer. You need to isolate the sound and replace the part to resolve the problem. The good news is that this is a new printer and will be covered by the warranty. Contact HP directly and have them run you through the options. It shouldnt cost you anything, but you do need to contact them directly.

HP Color Laserjet Pro MFP M177fw going cool down mood after printing every pages.

I have bought Color Laserjet Pro MFP M177fw before only 3days. From the very begining It says printing.... cooldown mood, and take a long paus. This issue occures after printing each page. I am using HP Toners. And my directly connected with wall socket(Electric). Please help me. It is urgent for me. Thanks in advance.

Afternoon , I found some information about the cool-down mode on your Laserjet Pro MFP M177fw. The product is too hot to continue printing at normal speed.
The product will pause longer between printed pages until it cools down.
Overheating occurs when the product lacks air ventilation or when it prints continuously for a long period of time. To prevent overheating, place the product in a well-ventilated area, and divide very large print jobs into smaller print jobs.Other than using it in a well ventilated room, you could see if there are any firmware updates available. You can click on this link to Getting Printer Updates for HP LaserJet Pro. If the issue continues, I would Contact HP Support for further assistance. Fill in the model number and the form to receive a case number. You can view all other ways of contacting HP from their list of Support Options. Thanks,

HP Color LaserJet Pro MFP M177fw doesn't print under user account. Windows 7 Pro x86

Dear Sirs,
We found a bug using HP CLJ Pro MFP M177fw on windows 7 pro 32-bit edition.
In our company we use custom folder to keep temporary files of all user accounts. It is C:\temp. So in the environment variables window we have user variables TEMP and TMP with the C:\temp path. System variables TEMP/TMP are the same.
After installing MFP's driver, under accounts with administrator rights we can print normally. But when we use account with user rights print doesn't work. Trying to print windows test page, we receive error message "Test page failed to print" and spooler state is clean. When we change user variables TEMP/TMP on default %USERPROFILE%\AppData\Local\Temp, we can print testpage successfully.
With older model HP CLJ Pro MFP M175 we have no trouble at our customized operating systems.
Can we hope on fixing print driver with regard to this problem?
Regards,
Evgeniy [edited personal information by moderator]

Hello rasitbolukcu,
Welcome to the HP Support forums. I understand that you are having difficulties enabling the web services for your Laserjet Pro MFP M177fw printer.
I appreciate all the information you gave me, it makes it much easier to assist you with the troubleshooting. I have included the Getting the Latest Firmware and Product Updates document. It will walk you through ensuring the printer has the latest firmware. Once you have updated the printer, please try to enable the web services again.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Can't install Color Laserjet Pro MFP M177fw

I'm having trouble installing the drivers for my new Color Laserjet Pro MFP M177fw AIO printer. I'm using a Sony Vaio VPCX118LG running Windows 7. I initially successfully installed the software from the disk provided some weeks ago, and had the printer running satisfactorily. About 3 weeks ago, I attempted unsuccessfully to install Office 2013 on the 32 system, and finally gave up trying and went back to Office 2010. Since about that time, I've been unable to use either of my M177s (I have two printers in my two offices in different cities; the one in Sydnay is working fine with my HP Pavilion desktop up there, but now won't work with my laptop, as won't the other identical printer in Canberra). I've tried uninstalling the software (using the Uninstall utility on the disk provided with the printer) and reinstalling. The install process seems to be proceeding normally but at about 99% complete stops with a message about a "Fatal Error". When monitoring the process using the Windows dialogue, the failure appears to coincide withthe installation of the last driver (after the Scan, Fax, USB Printer, etc...the one called, "HP Color Laserjet Pro MFP m177fw"). I've tried downloading the installation files and drivers from the HP website and installing from the disk provided, but neither method works. Can someone there offer any help, please? Claude

Hi , I think it's time to take the proverbial gloves off. I suggest you try a selective start up on your PC working directly with MSCONFIG to try and determine what, if any Windows service or program is interfering with your ability to install the drivers. Here's how: Click on the Start menuIn the 'search programs and files' box right above Start, type msconfig and hit enter on your keyboardWhen the System Configuration Window opens click 'Selective Startup' and uncheck Load Startup ItemsClick the Services tab. Check the box at the bottom for Hide All Microsoft ServicesSelect Disable AllSelect Apply and OKRestart your computer when promptedAfter you reboot, try the install again. If you're able to finish the setup we can safely assume there is a background program or service on your computer blocking the install. You will need to enable one service at a time on your computer to locate the program that's blocking your printer from printing. Here's how to undo the above-noted MSCONFIG steps: Click the Start icon.In the 'search programs and files' box right above Start, type msconfig and hit enter on your keyboardWhen the System Configuration Window opens click 'Normal Startup'Click Apply and OKRestart your computer as prompted. If this approach falls short I recommend you reach out to our tech support team. You can click on the following link to initiate a case: www.hp.com/contacthp/
Once you fill out the online form to create your case you can choose from different direct contact methods. Best of luck,

HP Color Laserjet Pro MFP M277 will not install on Lenovo ThinkPad X1 Windows 7 64 bit

I tried to install printer driver software for my completely new HP Color LaserJet Pro MFP on my Lenovo ThinkPad X1 laptop. Lenovo runs on Windows 7 64 bit. The installation failed during Installation preparation (77% complete). The process stopped saying an error occured without indication of the cause of the error. I have tried installion both from the CD following the printer product and downloading from the HP web, with the same result. I then then turned on my old computer, a Dell Precision M2400 with Windows XP. The installation went perfect without problems on this computer. Is there a bug in the SW for Windows 7 (64), or is some part of the printer SW sensitive to HW variaton between PC companies even if the OS is the same?

I have the same problem with my Lenovo ThinkPad T420 running Windows 7 64 bit. Tried absolutely everything I could find on the blogs and nothing worked. To me, seems like a software problem (glaring, given the popularity of Lenovos and the Windows 7 64 bit systems). Returning the printer tomorrow and will not buy another HP printer.

Doesn't feed paper. color laserjet pro mfp m177fw

I just bought the Color Laserjet Pro MFP M177fw. I removed all the packing as instructed in the installation guide.
While initializing the printer makes a strange noise. When I try to print it gives me a message to load paper. No matter how much paper I load in tray 1 it gives me the same message. I removed the paper and tray 1. Then using a torch I looked in the bin and I don't even see the white metallic rod moving when I give a print command. I suspect that there is something stopping the metalic rod from rotating. I see two black clips on both ends of the rod. Manual didn't mention it but was I suppose to take them out? Or there is another problem?
Need help.
Thanks
FKK

Hi @fkk ,
I read your post and see that the new printer is initializing and the printer makes a strange noise. You are also getting the message to "load paper". I would really like to be able to help you resolve this issue.
It sounds like there might be some more packing material inside the printer. Please check and remove any packaging material inside the printer. Here is a document for Setting Up the Printer Hardware for HP Color LaserJet Pro M177fw MFP Printers.
Disconnect the USB/Network/FAX and power the printer on Standalone.
Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
Try and update the printer's firmware. HP Color LaserJet Pro MFP M177fw.
Please check your private messages for additional steps to try.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet/Wireless)
If you appreciate my efforts, please click the Thumbs up button below.
Thank You. I look forward to hearing from you.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

New color laserjet pro mfp m177 will not scan or copy

Product is new. The problem is that this unit will not scan or copy. I downloaded the latest drivers, but they would not install completely. I also ran thru some trouble shooting guides on the HP website, but still it doesn't work. It tries to make a copy, but it acts like it starts and then stops without completing the function. It's almost like the scanner mechanism is stuck. Anyone ever have this problem with a brand new printer?

Hello , Thanks for posting in the HP Forums, and welcome! I understand you are unable to make a copy or scan on your new HP Color LaserJet Pro M177fw MFP. I'd like to help you with this. Firstly, do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
^ This is not limited to Laserjet printers. If the issue persists, I would suggest download and installing the most recent firmware for your unit. You can download the firmware update utility here:HP Color LaserJet Pro MFP M177fw Firmware UpdateNote: You will need to connect the printer via USB to update the firmware, as any interruption during the firmware update can cause more issues. If this still does not resolve the issue, please let me know if you are getting some sort of error message on the screen or any blinking lights to indicate what the problem may be. Hope this helps!

HP color laserjet pro cm1415 stopped printing on my wifi network.

Similar Messages

Maybe you are looking for