HP Color Laserjet PRO MFP M177FW Cannot connect to web services

I bought a HP Color Laserjet PRO MFP M177FW  today and I set up it. It can print and scan over wireless network. However, It cannot connect to web services correctly. I set the DNS numbers with google DNS addresses. I changed its IP address with manually. The IP address is unique. Normally It doesn't enable/remove webservices. But when I restart it, it can do for few minutes. It can take an e-mail address but It doesn't print any information sheet. When I try to print a sheet It says "Connection Problem" at first few minutes and later it says "Connecting"and it waits, there is no error message. What am I suppossed to do? Please help me. 
This question was solved.
View Solution.

Hello rasitbolukcu,
Welcome to the HP Support forums.  I understand that you are having difficulties enabling the web services for your Laserjet Pro MFP M177fw printer.
I appreciate all the information you gave me, it makes it much easier to assist you with the troubleshooting. I have included the Getting the Latest Firmware and Product Updates document.  It will walk you through ensuring the printer has the latest firmware.  Once you have updated the printer, please try to enable the web services again. 
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

  • HP Color LaserJet Pro MFP M177fw cannot scan or copy

    My HP Color LaserJet Pro MFP M177fw cannot scan or copy. Screen on the printer just show calibrating only
    Bsically an't scan or copy, the printer is just showing a message on the display of "calibrating".
    Thank you for help

    Hi @Ern88 , I can help you with not being able to scan or copy. The printer is showing that it is stuck calibrating.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    Try to make a copy again.
    Please check your private messages for additional steps to try.
    In the forum beside your handle name just click on the envelope to view it.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Trouble initializing color laserjet Pro MFP M177fw wireless connection

    color laserjet Pro MFP M177fw - Printer was working for several months, now it will not print and when you power cycle it just shows initializing... but never finishes.  Using wireless network connection to a Windows 7 pc.

    Hello,
    I have provided the URL for doing a firmware update on the printer, but do it through a USB connection. Since the printer is in a error state though, it might not detect the printer to do the update. HP Color LaserJet Pro MFP M177fw.
    Select your operating system, click  Submit, click the link for firmware and then click on the Download button.
    I have provided some steps to try to see if we can resolve this issue.
    Disconnect the USB/Network/FAX and power the printer on Standalone.
    Check and remove any packaging material inside the printer and toner.
    Do a hard reset to see if that will resolve the issue, if you haven't already.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
    I can send a private message with some another step to try.
    In the forum beside your handle name just click on the envelope to view it.
    How is the printer connected? (USB/Ethernet/Wireless)
    What operating system are you using?
    Please let me know the outcome.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Mac cannot detect scanner option on HP Color LaserJet Pro MFP M177fw after trying every method

    Hello,
    I have recently purchased the new printer HP Color LaserJet Pro MFP M177fw and I am having a lot of trouble trying to scan. I have spend hours trying to fix this.
    I have tried all the methods on this website, (trying through preview, printers and scanners (no scanner option showing) image capture, etc. I have also installed all the necessary drivers with no luck (CD and from HP website)
    Then I tried all the other methods that were listed, I have tried restarting, deleting drivers and proceeding through image capture, preview and sanner and printers,  it just does not have scan option anywhere.
    The printer is working fine though, and I am connected to the printer through wifi
    I do not know what else to try, please help.
    Kinds regards
    Zhanna

    Hi @student ,
    I see by your post that you aren't able to scan through the wireless network. I would really like to be able to help you resolve this issue.
    When you added the printer, did you add it as a Bonjour printer or did you have to type in the IP address and add it through IP Protocal? The reason I am asking is because when adding the printer through IP Protocal you can only print, your not able to scan with the printer added this way.
    Check the driver name that is installed for the printer. It should list just the printer's name. (HP Color LaserJet Pro MFP M177fw )
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
    If the printer name isn't listed properly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver. (you might have to click the drop down to select the printer's name to add it in)
    If you are still having issues, uninstall the printer software.
    Uninstalling the Printer Software.
    Repair the Disk Permissions on the Mac:
    Close all applications.
    On the Apple menu bar, click Go, click Applications and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left.
    Click Verify and then Repair Disk Permissions.
    Restart the computer.
    Empty the trash.
    Reset the Printing System:
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Click the Apple icon and then click System Preferences.
    Click Printers & Scanners.
    Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system.
    Then install the printer software again. HP Color LaserJet Pro MFP M176/M177 Series Software.
    If the issue persists, connect the printer directly to the Mac and try and scan through a USB connection. Just to rule out a network issue.
    Please let me know the outcome.
    Have a fantastic day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Color LaserJet Pro MFP M177fw screen frozen on hp logo and energy star icon

    My HP Color LaserJet Pro MFP M177fw screen is frozen on hp logo and energy star icon.  It has only printed the test page, and will not print otherwise.  I have tried unplugging for 60 seconds, and even uninstalled it and reinstalled it with the latest download - still no change.   None of the other icons outside the screen work either (home, help, etc.)  about all i can do is turn it off and on.  Also,  I obviously cannot make copies etc since I cannot access any of the functions. Please help! and thanks in advance!

    Hi , I read your post and see that the printer is frozen on the HP Logo and Energy Star Icon. I would really like to be able to help you resolve this issue.
    I have provided some steps to try to see if we can resolve this issue. Disconnect the USB/Network/FAX and power the printer on Standalone. Check and remove any packaging material inside the printer and toner. Do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation. If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord. Update the printer's firmware, make sure you run this through a USB connection. It may not detect the printer in this error state though. Software and Drivers. Select Option 2 and wait for the page to load and then select the link for firmware. I can send a private message with some another step to try.
    In the forum beside your handle name just click on the envelope to view it. How is the printer connected? (USB/Ethernet/Wireless) Please let me know the outcome. Have a nice day!
    Thank You.

  • Hp color laserjet pro mfp m177fw (Cant open SCANNER on computer)

    Hi there,
    I am using a desktop 27 inch Mac with OS X Yosemite 10.10.1
    When I go to system preferences and click on printers/scanners I can see my mfp m177fw laserjet printer (wirelessly connected fine). But unlike on my Macbook Pro laptop on my desktop there is no SCANNER option to open up?  Thus I am unable to scan from the printer to this desktop. I have the latest HP driver installed on the desktop computer for my m177fw printer.
    Any ideas? Any help would be greatly appreciated
    thanks!
    Simon

    Hello @Simonjayh,
    Welcome to the HP Support Forums!
    I would like to assist you today with resolving the scan issue that you're experiencing since installing your HP Color LaserJet Pro MFP M177fw on your Mac OS X 10.10 computer. Can I please have you run through the steps below to get this product functioning properly again for you.
    Step 1: Uninstall Drivers:
    First, can I please have you click here and run through the steps provided to Reset the Print System on your Mac OS X 10.10 computer. Please refer to the section under 'Resetting the printing system in OS X Lion' as the steps are the same for your Mac OS X 10.10 Operating System. Resetting the Print System will remove every printer from your Print & Scan window on your computer. However, this does not uninstall the devices. Therefore, should you use other printers on your Mac OS X 10.10 computer simply ensure that they are plugged in with a USB Cable or Network connected and add (+) them back in. Do not add your HP Laserjet printer back in at this time.
    Next, please click here to access the steps on how to properly uninstall the Software and Driver Package for your printer. Once the website opens select the dropdown for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for your Mac OS X 10.10 Operating System. Once the uninstall has completed successfully, please proceed to the next step.
    Step 2: Verify and Repair your Disk Permissions on the Mac:
    Open Macintosh HD and go to Applications
    Go to the Utilities Folder
    Open the Disk Utility
    Select the Hard Drive volume you are using (usually on the left)
    Select Verify Disk Permissions
    Once that process is done, select Repair Disk Permissions
    Step 3: Check for Apple Updates:
    Go to Apple
    Select System Preferences
    Select Software Update
    Click Update Now
    Install your available updates
    Restart your computer
    Step 4: Reinstall your Software and Drivers:
    Lastly, please click here to download the appropriate Mac OS X 10.10 Full Feature Software and Driver package for you printer. Once the website opens select the Download button on the top left. Once the Download is complete please follow the onscreen steps to reinstall you printer.
    Once your printer has been successfully reinstalled, please test the HP Scan functions again. For additional scan information, you may want to refer to : Scanning with the Full Feature HP Software in OS X v10.10 Yosemite
    Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • HP Color LaserJet Pro MFP M177fw don't go to sleep mode

    Hi and sorry for my english In settings of HP Color LaserJet Pro MFP M177fw I tryed 15 and 5 minutes before sleep mode. After 15 or 5 minutes printer going to sleep, but if I'm used printer even only one time, after that he don't sleep ( printer's screen not dim), not after 5 and 15 minutes. Printer is connected through wi-fi, Windows 8.1 x64. Any ideas?)

    Hi Denis88,
    I see by your post that the printer isn't going into sleep mode.
    I can help you with this issue.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
    I would update the printer's firmware if the printer won't go into sleep mode.
    HP Color LaserJet Pro MFP M177fw Drivers.
    Select your operating system, click next, click the link for firmware.
    I have provided some information from the manual for the sleep mode that you can check out.
    COLOR LASERJET PRO MFP.
    EcoSMART Console: Change the default times for entering Sleep mode or Auto Power
    Down mode. Configure which events cause the product to wake.
    Printer Settings Auto-off Configure the product to automatically turn off after a period of
    inactivity. You can adjust the number of minutes after which the product turns off.
    Touchscreen control panel:
    1. From the Home screen on the product control panel, touch the Setup button.
    2. Open the following menus:
     System Setup
     Energy Settings
     Sleep/Auto Off After
    3. Select the time for the Sleep/Auto Off delay.
    NOTE: The default value is 15 Minutes.
    4. The product automatically wakes when it receives jobs or when you touch the screen on the product
    control panel.
    You can change which events cause the product to wake. Open the following menus:
     System Setup
     Energy Settings
     Wake/Auto On Events
    To turn off a wake event, select the event, and then select the No option.
    Hope this helps resolve your issue.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Color LaserJet Pro MFP M177fw Scanning

    I bought and jsut setup an HP Color LaserJet Pro MFP M177fw.  
    We are a Mac household, and we connect via wireless to the printer, which works great. 
    My issue is scanning.  On the little screen on the printer, I can copy, print and even fax.  No option for scanning.  There is some bullsh*t app that I've had to download via HP called Readiris, which is useless.  There is no apparent way to initiate a scan via this app. 
    So I've bought a multifunction printer that doesn't scan.  Any help?  

    It doesn't scan?! 
    Below is the text from the first page of the first link one clicks on about this printer.  How _on earth_ is one supposed to deduce pre-purchase that it doesn't scan from the main menu?  Argh.  As an HP employee myself, this is aggravating in the extreme. 
    Ok, venting aside, this link <http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03967506#N229> is not offering a solution. 
    I am running OSX 10.9.1. I am unable to find the Full Driver to donwload in order to connect to this printer in a manner that would enable any of the 3 methods of scanning (Via Preview, Image Capture, etc.) to work.  Can you please provide a link to the Full Driver for this MFP M177fw for Mac OSX 10.9?  Thanks.
    ***  Start copied text from online website on HP printer ***
    This affordable HP Color LaserJet Pro MFP brings vibrant color printing
    in-house, and boosts productivity with Ethernet connectivity. Enable easy
    printing at work, home, or on the go with mobile printing features.1
    Print speed:4
    Black: Up to 17 ppm; Color: Up to 4 ppm
    Scan resolution: Up to 1200 x 1200 dpi (hardware); Up to 1200 x 1200 dpi
    (optical)
    Copy resolution: Black (text): Up to 300 x 300 dpi; Black (graphics): Up to
    400 x 600 dpi; Color (text and graphics): Up to 300 x 300 dpi
    Display: 3.0" LCD (color graphics)
    Standard connectivity: Hi-Speed USB 2.0 port; built-in Fast Ethernet
    10/100Base-TX network port; Wireless 802.11b/g/n
    Duty cycle:5
    Up to 20,000 pages

  • Color laserjet pro MFP M177fw loses IP address

    New Color Laserjet Pro MFP M177fw keeps losing the IP address so my computer won't print via wireless. What to do?

    Hi markfanderson12,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand the printer keeps losing the IP address.
    I will be happy to help you.
    When the printer is installed on a network, (wired or wireless) the router assigns it an IP address.
    However this IP address can change for various reasons. Most of the time the printer software will often adapt to the new IP address and printing functions will carry on as normal but the scanner software will not.
    I would setup a static IP address for the printer once it is back on the network again to resolve this issue.
    Printer Does Not Maintain Wireless Connection. Go to Solution three: Assign the printer a static IP address.
    At the bottom, select Additional information for Tips for troubleshooting  a wireless connection.
    Hope this helps.
    Thank you for posting on the HP Forums.
    Have a nice day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Color LaserJet Pro MFP M177fw Not working with Fedora 14

    Our ERP is compactible up to Fedora 14. But I newly purchased Printer(
    HP Color LaserJet Pro MFP M177fw) is not working with this OS.
    Give me a urgent solution

    Hi @HealthITLadyRed,
    I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
    I have provided some steps to try to see if we can resolve this issue.
    Check and remove any packaging material inside the printer and toner.
    Disconnect the USB/Network/FAX and power the printer on Standalone.
    Do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
    Update the printer's firmware by a USB connection. Software and Drivers.
    Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
    I can send a private message with another step to try.
    In the forum beside your handle name just click on the envelope to view it.
    How is the printer connected? (USB/Ethernet/Wireless)
    What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
    Is this a new printer?
    If you appreciate my efforts, please click the Thumbs up button below.
    If there is anything else I can help you with, just let me know. Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Doesn't feed paper. color laserjet pro mfp m177fw

    I just bought the Color Laserjet Pro MFP M177fw. I removed all the packing as instructed in the installation guide.
    While initializing the printer makes a strange noise. When I try to print it gives me a message to load paper. No matter how much paper I load in tray 1 it gives me the same message.  I removed the paper and tray 1. Then using a torch I looked in the bin and I don't even see the white metallic rod  moving when I give a print command. I suspect that there is something stopping the metalic rod from rotating. I see two black clips on both ends of the rod. Manual didn't mention it but was I suppose to take them out? Or there is another problem?
    Need help.
    Thanks
    FKK

    Hi @fkk ,
    I read your post and see that the new printer is initializing and the printer makes a strange noise. You are also getting the message to "load paper". I would really like to be able to help you resolve this issue.
    It sounds like there might be some more packing material inside the printer.  Please check and remove any packaging material inside the printer. Here is a document for Setting Up the Printer Hardware for HP Color LaserJet Pro M177fw MFP Printers.
    Disconnect the USB/Network/FAX and power the printer on Standalone.
    Do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
    Try and update the printer's firmware. HP Color LaserJet Pro MFP M177fw.
    Please check your private messages for additional steps to try.
    In the forum beside your handle name just click on the envelope to view it.
    How is the printer connected? (USB/Ethernet/Wireless)
    If you appreciate my efforts, please click the Thumbs up button below.
    Thank You. I look forward to hearing from you.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Un able to install Scan to Email app on Color LaserJet Pro MFP M177fw

    Hello!
    I recently purchased  Color LaserJet Pro MFP M177fw as my home printer.
    Main thing i was looking for was Scan to Email feature.
    As I read in specifications provided in this product description I see:
    http://www.shopping.hp.com/shopping/pdf/cz165a.pdf
    Digital sending standard features: Scan to E-mail by HP SW; scan to application by HP SW ; scan to file by HP SW
    Once I try to install Scan to Email app i get following message once i try to install app:
    What is wrong, that i cannot install app that was one of main choice points of this printer.
    TWAIN and using computer scanning process is clear, so no need instructions how to scan using computer.
    I especially need fucntion that i scan document on printer, then enter email and its emailed.
    Thank You in advance for clarification,
    Martins

    Hi MrJansons,
    There are a numerous ways to scan and email from your printer. Please go through the below links.
    Make sure you have installed the software driver for your printer on your machine and then follow any of the methods to scan and email.
    http://support.hp.com/us-en/document/c03476857
    Kind Regards,
    Oliver
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.

  • Scan to email on Color LaserJet Pro MFP M177fw

    I am trying to download the Printable "Scan to Email" onto my  Color LaserJet Pro MFP M177fw but It keeps throwing an error?
    When I  bought the printer (yesterday) i was told that I could set it up to Scan in a document and have it automatically send out as an email to a recipient.  How do I accomplish this?
    thanks!
    This question was solved.
    View Solution.

    Step by step -
    I want to walk up to my M177FW
    place a document on it
    scan it to either an email address or a folder on a server on my network
    My old unit the OfficeJet 6500 could do this - i cannot believe the newer tech cannot.  Please tell me what i'm doing wrong and please do not ask me to walk to a PC and run special software.  Use the scenario above - thank you

  • HP Color LaserJet Pro MFP M177fw Printer always cool-down mode

    Hi there, i am also meeting with the same issues like the cooldown mode printing.

    Hi , I found something written by  that you may find helpful regarding the printer going into cool down mode: I have provided a document with Resolving Control Panel Messages. Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation. Update the printer's firmware. HP Color LaserJet Pro MFP M177fw Drivers. Where is the printer located? (enclosed shelf, desk)How many pages are you printing when you get this message?What is the paper's weight and what kind of paper are you using?  If the issue persists, please post back with the answer to the above questions.  Thanks.   

  • HP Color Laserjet Pro MFP M177fw going cool down mood after printing every pages.

    I have bought Color Laserjet Pro MFP M177fw before only 3days. From the very begining It says printing.... cooldown mood, and take a long paus. This issue occures after printing each page. I am using HP Toners. And my directly connected with wall socket(Electric).  Please help me. It is urgent for me. Thanks in advance.

    Afternoon , I found some information about the cool-down mode on your Laserjet Pro MFP M177fw. The product is too hot to continue printing at normal speed.
    The product will pause longer between printed pages until it cools down.
    Overheating occurs when the product lacks air ventilation or when it prints continuously for a long period of time. To prevent overheating, place the product in a well-ventilated area, and divide very large print jobs into smaller print jobs.Other than using it in a well ventilated room, you could see if there are any firmware updates available. You can click on this link to Getting Printer Updates for HP LaserJet Pro. If the issue continues, I would Contact HP Support for further assistance. Fill in the model number and the form to receive a case number. You can view all other ways of contacting HP from their list of Support Options.  Thanks, 

Maybe you are looking for