HP Compaq 4000 Desktop - New e1000e Driver

We just received a large shipment of HP Compaq 4000 SFF desktops. The Intel e1000e network cards in them were not recognized by the PXE boot (even after we used the March 2011 Imaging Drivers update.) We did some checking and found that the "newid" parameter for these cards is "0x8086 0x1525,e1000e". I thought I would let everyone know in case someone else runs into it. Maybe this can be added in the April Imaging Update?

jmlester,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

HPE Desktop New Hard Drive/No Bootable Drive

After receiving a "Hard Drive Failure Imminent" message, I saved files, made recovery disks, and installed a new hard drive. All specs for new HD meet requirements. I couldn't get my recovery disks to work and ordered a set from HP. When attempting to boot with Disk 1, process goes normally until "Insert Disk One" message appears while it's still in the drive. I inserted Disk 2 just for giggles but "Insert Disk 1" message still appears.
I found a fix for "recovery disks from HP won't work" and downloaded the cyberlink software to dvd (on laptop) but booting with that only results in Reboot error message.
HP Diagnostics passed tests for both the new HD and DVD drives. The "boot path" fails with BIOHD-3 error and the message "no bootable path".
In setup, HD appears in drive 1 and DVD in drive 2--both enabled.
Any help on recovery would be greatly appreciated. I'm at my wits end.

Hi,
Do you have the boot order in the BIOS set to boot to the DVD drive first?
To open the BIOS Setup utility, turn on the computer and immediately press the F10 key repeatedly, about once every second, until the BIOS setup utility screen opens.
Choose menu screens by pressing the left or right arrow keys. Use the up or down arrow keys to move up or down through the list of items on a menu screen. Press the Enter key to select an item for modification. For certain items, pressing the Enter key opens a submenu. After you have selected a menu item, use the arrow keys to modify the settings. Press the Esc key to exit from a submenu. Help is shown on the right side of the screen.
Jaco
Errare humanum est.

No hard drive icon on desktop - new hard drive

I just upgraded the hard drive on my macbook pro. Now, when I look at the desktop there is no icon for the hard drive (Macintosh HD). What do I need to do to be able to have a hard drive icon on the desktop?

In both the general section (desktop) as well as the sidebar section. The Lions think they're some sort of iPhone or iPad and hide everything.

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive.

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive. It said my computer is not authorized. I want to move all the old c to the new c drive, or get the itune to open my old c drive when I log in.

might be some help on one of these links.
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

New hard drive install on compaq cq56-115dx laptop

the 250gb hard drive on my compaq presario cq56-115dx failed after 3 years. i have installed a new hard drive and used the compaq recovery disks 1-4 to do a system install option. everything ran fine during the installs of the disks and even prompted me to remove disks so the rest of the configuration could take place.
right now, the laptop has been on over an hour with the lcd screen lit up but it is blank. the fan is running and i have yet to see the indicator light flash for the hard drive.
i cannot tell if anything is going on. really nervous about this.
how long can this go on?
how will i know if the recovery has failed in any way?
is there anyway to restart the process over again?
what are my options?

I have a Compaq Presario CQ 56-115DX that has just turned 3 years old and the hard drive apparently has gone bad . I'm trying to fond instructions on how to install the new upgrade , and where the best place close to me would be to find one would be ! I'm in central Florida in the 33880 area code . And what about the installation ? I can't seem to find anything on this pc . I really like the pc and want to keep it ! I hate Windows 8 ! Sheesh

My iMac (late 2010 model) desktop's hard drive is fried (was about 200GB). How much am I expecting to pay for a new one and retrieve my information?

My iMac (late 2010 model) desktop's hard drive is fried (was about 200GB). How much am I expecting to pay for a new one and retrieve my information?

As you can see Erin, trying to recover information from a hosed drive can be very expensive.
I would suggest first the OWC site as well. You can get a new drive of choice in size there.
I would also get the voyager http://eshop.macsales.com/item/Newer%20Technology/VOYQHDB1.0T/
and..
http://eshop.macsales.com/item/Prosoft%20Engineering/DGDR3BUN/
http://eshop.macsales.com/item/NewerTech/TOOLKIT11/
Wth your lap top and these folllowing tools your are set to change out the drive, reload OS and then with
the voyager pop in the old iMac drive and with the Prosoft software, try to mount and recover the files. Data Rescue is very good at this " if " the drive is not totally mechanically hosed. Drive Genius is very good at a number of things too. Nothing replaces the old adage of Back Up Back up Back up.
The voyage I listed can become the new backup drive for you.. your choice of tools: Time Machine or by cloning via CarbonCopyCloner or by what I use SuperDuper! IF you want to be really kewl.. both. By that I mean cloning and Time Machine.
It will take you an hour to swap out the drive and spring clean the iMac.. there is a hundred how too,s on you tube.
Hope this helps. Remember if is always when a drive will fail..they all do. I tell the people I support that Harddrives are good for 15 min.. to when they don't work. They will all fail.
Apple Geniuses are very limited to what they can and will do as far as file recovery.
Your best bet is to try to do it your self first. There is lots of help out here and you are not the first.
Don

I have Windows 8.1. I have had MageMaker 7.0.1 working fine on desktop for MANY years. Had to get a new hard drive. Now computer doesn't read the PM DVD. so I can't reinstall it. Can anyone help?

I have Windows 8.1. I have had PageMaker 7.0.1 working fine on desktop for MANY years. Had to get a new hard drive. Now computer doesn't read the PM DVD. so I can't reinstall it. Can anyone help?

Sorry, but the chance of ever getting PM to work on Windows 8 is somewhere
near zero.
Buy a very old computer or move to a new application.

I bought a GoFlex desktop external hard drive and when I attached to my old mac toer and transfered all my files they are all in asian text? It took all weekend to tranfer and when I attached it to my new mini allthe transfered files are in asian ... what

I bought a GoFlex desktop external hard drive and when I attached to my old mac and transfered all my files they are all in asian text? It took all weekend to transfer and when I attached it to my new mini all the transfered files are in asian ... what can I do to change them into English?

What kind of files are these?
Are the Filenames in asian also?
Can you paste some of the asian here so we can have a better guess at what's going on?

How to install Windows XP on a new hard drive in desktop computer

Have a Lenovo desktop. I replaced the defective hard drive. Obtained Windows XP installation disks from Lenovo. I received recovery two
Recovery CDs, namely Rescue and Recovery CD and Product Recovery CD along with 5 CD Roms ( 1of 5 through 5of 5).
I want to install Windows XP in my new Hitachi hard drive. Should I use only the 5 CD ROMS 1 thru 5, leaving out the Recovery and Rescue CD
and Product Recovery CD Rom.
How to I install Window XP in my new hard drive? I am not a computer
wizard. As a retired IBM senior citizen I need some help from the community. I am not cognizant with the steps to follow. I am a new
member of this great community.
Thanks a bunch ! padman
personal informations removed for your own security

padman215, welcome to the forum,
you need to boot from the Rescue and Recovery cd and select to recover the system and then to recover to factory state. It will then eventually ask for the other discs.
Please be sure that you read the messages carefully; if it asks for a supplementary disc, (which you don't seem to have), you need to click on "no" should it ask for one - this throws alot of people.
Happy installing
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Palm Desktop reinstall on new hard drive

Configuration: Palm 515, Windows XP Pro, Palm Desktop 4.1.4, Hotsync 4.0.4
Installed new hard drive on PC, reinstalled Windows, installed Palm Desktop and copied existing files (address, etc) onto new drive.
Problem - User 1's contacts did not appear on Palm Desktop, and User 2's contacts were not current.
Is Hotsynching the only way to update Palm Desktop? Why didn't the newly installed Palm Desktop simply reference the existing files that I copied?
Post relates to: Palm m515

Your computer should have come with, or you upgraded with a 10.6 disk which either contains the full OS X, however the 10.6.3 white upgrade disk doesn't contain the free iLife that's on the colored machine specific disks.
If you don't have either, then call Apple via phone (only) to order your 10.6 disks.
How to erase and install Snow Leopard 10.6
However if your pleased with what's on your present boot drive, you can use Carbon Copy Cloner to copy it to a blank external powered drive and even hold the option key down while booting to boot from it.
Then when you switch hard drives, simply reverse clone onto the new one.
Save you having to backup and reinstall everything new, but a lot of people do that extra work to get a "clean" machine again.
Most commonly used backup methods
..Step by Step to fix your Mac
While your inside you might as well bump your RAM up to the max as well.
Install/upgrade RAM or storage drive in Mac's
If this is all too much for you, any local PC/Mac repair shop can do the work. Apple charges a fortune and you don't get the drive you want in a lot of cases.

Trouble Restoring Compaq Presario C762NR After New Hard Drive

I installed a new hard drive in the laptop and bought the recovery disks. The recovery runs for hours and then fails. It gave me a whole list of (Pass/Fail) items and it seems that the only part that failed had to do with .systemlogs
I wish I could just copy and paste the message but I can't. The error did not give any codes. My friend can't afford a new computer at this time and I was really hoping I could fix this one. Is there any solution? Is there a way to copy and paste the error report to make this easier?
Thank you

If the original operating system is changed to a non-Windows 7 OS, or if the PC cannot access the Windows desktop, or the Recovery Manager cannot be started by selecting the f11 key on startup, you can use either the personalized recovery disc that you created, or you can order a replacement recovery disc from HP to start the PC and restore the hard drive to its original operating condition.
NOTE:Performing the recovery process using the personalized recovery disc that you created may take less than an hour. Using replacement discs ordered directly from HP may take four to six hours and includes several restarts.
If the HP Recovery Manager on the disc can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt is displayed to continue running the recovery using the Recovery Manager on the hard drive. If the program on the hard drive cannot be repaired, continue using the recovery disc in the optical disc drive.
Use the recovery disc to restore the PC by following the steps below.
Insert the recovery disc in the optical disc drive and start the computer.
If the computer is running, insert the recovery disc and immediately click Start and select Restart to force the computer to start from the recovery disc.
When prompted, Press any key to boot from CD or DVD, press any key on the keyboard.
Allow the recovery disc to start and load the required files while the Microsoft loading screen is displayed. It may take several minutes to load the required files.
When the HP Recovery Manager window displays, click System recovery .
Follow the on-screen instructions and perform the required actions.
NOTE:Do not interrupt the recovery process even though the computer may restart, or the Windows desktop may display, or the process may appear to pause for several minutes at various times.
When prompted, follow the on-screen instructions to back up the user files.
After performing the backup, when prompted, re-insert the recovery disc, and then click Next to continue the recovery process.
A status box is displayed to indicate the status of the recovery and the estimated time remaining.
If you used multiple discs when you created the personalized recovery discs, follow the prompts to remove the first disc and insert any requested discs.
When prompted to Insert the Supplemental driver disc , take one of the following actions:
If you purchased a replacement recovery disc from HP, and it included a Supplemental driver disc, insert the disc and click OK or Next . The recovery program checks the supplemental disc and installs the specific needed files.
After the Supplemental files are installed, a prompt is displayed to remove the Supplemental disc and insert the original recovery disc.
If you purchased a replacement recovery disc from HP, and it did not include a Supplemental driver disc, click Skip or Cancel . The recovery program will ignore the request and install the next file on the recovery disc.
If you created a personal recovery disc, press Next to continue.
Continue following the on-screen instructions to complete the recovery process.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Migrate my old hard drive to my new SDD drive with them both install in my desktop

hi is it possible to migrate my old hard drive to my new SDD drive with them both install in my desktop at the same time? also where can I download the software? I cant find any on SanDisk website Thanks

yes you can migrate with both the SSD and HDD connected internally to your desktop. SanDisk offers a one time use cloning software for free in the SSD Dashboard. Use the link below to install the SSD Dahboard and on the Tool tab there will be an option for Apricorn cloning software.
http://kb.sandisk.com/app/answers/detail/a_id/15108

Just got a new hard drive w system X 10 8 2 - don't see my hard disk on the desktop - is this new or am I missing something?

Hi, just had to get a new hard drive for my Imac. Installed Mountain Lion 1 8 2 - I do not see my hard disk on the desktop. Is this new? or am I missing something?

Open the General tab of the Finder's preferences and check the box for it.
(74393)

Creating A New Boot Drive For Mac Pro Desktop

I have a Mac Pro 1,1 using Lion:
I would like to create a new and bigger boot drive but having not done this before I would appreciate any direction that would make this as painless as possible. I will continue to use Lion but am a little lost when it comes to doing this with the download process of Lion as well as transferring what has been created on the current HD in the MacPro. I have a new WD Black 2 TB SATA that I would like to use as the new boot drive. Again, thank you for the help.

Don't. Use. 2TB for system. Seriously.
Use that for data.
Get yourself a $89 Samsung 840 120GB instead along with Icy Dock $15. You will. Love it.
You don't need a large drive for the system. All you need to do is MOVE all the data and media files and every thing else, just leave the small 4GB /Users/myuseraccount/Library on the boot drive with the OS and apps. Everything else gets off loaded.
Leave your drive you ahve now as is for backup. Move data and clone the system.
Clone your system:
How to Clone a Volume
Using Cloning as a Backup Strategy
See also Erasing a Drive, How and Why to Partition a Drive, RAID.
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://macperformanceguide.com/Mac-HowToClone.html
http://www.dummies.com/how-to/content/how-to-partition-your-hard-drive-on-mac-os -x-snow-.html
http://pondini.org/OSX/DU.html
How to relocate system and user data to another drive:
http://support.apple.com/kb/HT4337http://chris.pirillo.com/how-to-move-the-home-folder-in-os-x-and-why/To successfully relocate your operating system, user accounts and data from one storage device to another, meet the following conditions:
The destination storage device (SSD drive or hard drive) you are migrating to should be physically located in the same computer. Moving operating system files from one computer to another computer using software not specifically designed for that computer can cause issues due to software, hardware, and firmware version mismatches.
Always back up your storage device with Time Machine or Disk Utility before you start.
Icy Dock $15
http://www.amazon.com/2-5-3-5-Ssd-sata-Convert/dp/B002Z2QDNE/
SSD: Samsung 840 EVO 128GB
http://www.amazon.com/Samsung-Electronics-2-5-Inch-Internal-MZ-7TE120BW/dp/B00E3 W15P0/
2x2GB FBDIMM DDR2 667MHz @ $25
http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/

Problem to get 3d work on HP Compaq Business Desktop dx2000

I bought a brand new HP with linux - mandrake - a month ago. I installed mandrake but then I got so confused that I through it all away and started on again with Archlinux that I have become used to.
Everything (well, of course not everything but most :? ) works all right but a few things doesn't.
First I couldn't get CUPS to work properly but that I solved - but don't ask me how. I think I did the same things over 5 times and then suddenly it worked as it should.
Then I had problems with the sound - but that worsk now after following the wiki.
Then I had problems with playing CD and DVD but that I managed to get to work.
But now I am stuck.
The 3d doesn't work. I tried to install all 3d modules I could find in arch but no result. I tried through hwd -e and lokalsed the modules named there with no result. I even tried NVIDIA (the computer have a intel graphics on board and no Nvidia-card) with the result that now the CD can't play sound-CD and the DVD doesn't work for multimedia despite newest xine and mplayer, koffeine etc I installed.
So I have 3 major problems:
1) the 3d card I want to start working
2) the CD-rom should be able to play sound-CD
3) the DVD should be able to play dvd-films.
Some hard-data:
HP Compaq Business Desktop dx2000
Intel celeron with MMX technology 2.6 Ghz and 400 Mhz system bus
Integrated ADI AD1888 Audio
Integrated Intel extreme Graphics 2 with GDI/GDI+ and Direct Show controller
Graphics memory 16 Mb + extra through Intel Dynamic Video Memory. Complete OpenGL 1.3 support.
2 DVD-drives installed Toshiba Samsung
Any one that could giv me a hint on how to start the solving of this?

These modules I have loaded:
% lsmod
odule Size Used by
dummy 3460 0
ehci_hcd 35332 0
i810 86420 0
snd_pcm_oss 56612 0
snd_mixer_oss 21120 1 snd_pcm_oss
snd_intel8x0 34336 1
snd_ac97_codec 78176 1 snd_intel8x0
snd_pcm 101252 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 27140 1 snd_pcm
snd 59108 8 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 10848 1 snd
snd_page_alloc 10244 2 snd_intel8x0,snd_pcm
parport_pc 28996 1
lp 12296 0
parport 38600 2 parport_pc,lp
usb_storage 71232 0
uhci_hcd 34576 0
eepro100 30988 0
e100 36992 0
mii 5760 2 eepro100,e100
usbserial 31336 0
usbcore 125560 5 ehci_hcd,usb_storage,uhci_hcd,usbserial
when I try hwd -e this results come:
% hwd -e
HARDWARE DETECT ver 4.1.2
Starting... (expert mode)
Detecting pci, usb, and pcmcia devices.
PCI DEVICE
VendID DevID Module Description
8086 1050 "e100" "Intel Corp.|82801EB (ICH5) PRO/100 VE Ethernet Controller"
8086 1229 8086 1050 "eepro100" "Intel Corp.|EtherExpress PRO/100 S Server Adapter"
8086 244e "hw_random" "Intel Corp.|82820 815e (Camino 2) Chipset PCI"
8086 24d0 "i810-tco" "Intel Corp.|82801EB ISA Bridge (LPC)"
8086 24d2 "usb-uhci" "Intel Corp.|USB Controller"
8086 24d3 "i2c-i801" "Intel Corp.|82801EB SMBus"
8086 24d4 "usb-uhci" "Intel Corp.|USB Controller"
8086 24d5 "snd-intel8x0" "Intel Corp.|82801EB AC'97 Audio"
8086 24d7 "usb-uhci" "Intel Corp.|USB Controller"
8086 24db "ata_piix" "Intel Corp.|82801EB ICH5 IDE"
8086 24dd "ehci-hcd" "Intel Corp.|USB Enhanced Controller"
8086 24de "unknown" "Intel Corp.|82801EB USB EHCI Controller #2"
8086 2570 "intel-agp" "Intel Corp.|82865G [Springdale-G] Chipset HostBridge"
8086 2572 "Card:Intel 865" "Intel Corp.|865 Chipset Graphics Controller"
PCMCIA DEVICE
no pcmcia driver in /proc/devices
VendID DevID Module Description
USB DEVICE
VendID DevID Module Description
Press any key to continue...
HD PARITIONS
/dev/hda /dev/hda1 /dev/hda2 /dev/hda3 /dev/hdc /dev/hdd
MODULES
dummy ehci_hcd i810 snd_pcm_oss snd_mixer_oss snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd soundcore snd_page_alloc parport_pc lp parport usb_storage uhci_hcd eepro100 e100 mii usbserial usbcore
INFORMATION
hwd -s - generates howto and sample X configure.
% hwd - s
HARDWARE DETECT ver 4.1.2
Starting... : (simple mode)
Kernel : 2.6.10-ARCH
CPU & Cache: Processor 0 is Intel(R) Celeron(R) CPU 2.53GHz 2534MHz, 256 KB Cache
ALSA(sound): Intel Corp.|82801EB AC'97 Audio module: snd-intel8x0
Video : Intel Corp.|865 Chipset Graphics Controller server: Xorg (i810)
Monitor : MAX1b6c H:28.0-96.0kHz V:50.0-75.0Hz
Mouse : Generic PS/2 Wheel Mouse device: /dev/psaux
Hard Disk : SAMSUNG SP0411N device: /dev/hda
SCSI : No scsi disk
Swap : Swap found device: /dev/hda2
Scanner : No scanner
CDROM 1 : TSSTcorpDVD-ROM TS-H352A device: /dev/hdc
CDROM 2 : TSSTcorpDVD-ROM TS-H352A device: /dev/hdd
Floppy : 3.5 1.44MB floppy drive device: /dev/fd0
USB : USB found module: ehci-hcd
Ethernet : Intel Corp.|82801EB (ICH5) PRO/100 VE Ethernet Controller module: e100 device: eth0
PCMCIA : Detect PCMCIA cards run hwd -d
Modem : No pci modem
Howto : View howto run hwd -h
Testing : File /etc/X11/xorg.conf already exist!!
: Read more in howto.
in hwd - h the following part is about monitor:
XWindows:
Video Card : Intel Corp.|865 Chipset Graphics Controller
Monitor : MAX1b6c
H kHz : 28.0-96.0
V Hz : 50.0-75.0
Xserver : Xorg
Xmodule : i810
Mouse : Generic PS/2 Wheel Mouse at /dev/psaux module: msintellips
/2
anyone that can help me on?

HP Compaq 4000 Desktop - New e1000e Driver

Similar Messages

Maybe you are looking for