HP compaq 6720s fun none-stop

HP compaq 6720s
OS: Windows 7
Fun is running all the time and CPU temperature is 80 to 88 Celsius degrees
Probably one of drivers wrongly installed since first time OS was installed

slumslayer wrote:Maybe you can try to compile your own kernel. My 6720s is working fine with 2.6.31-rc*
Where did you get that kernel?
I tried to compile my own kernel once, not that I needed to, but I thought it would be fun. Unfortunately, all those options overwhelmed me (do I need support for foo or is it safe to disable that? should it be built in, or a module?) Just too many options about which I knew nothing. For this reason I'd rather not have to compile it myself. Plus, I don't know if it would actually help with my problem.

Similar Messages

Compaq Laptop CQ60-615DX Little white light beside the dc jack blinking repeatedly non-stop

Compaq Laptop CQ60-615DX white light next to where you plug in the power cable keeps blinking. Never stops Blinking. Computer doesn't power on.
The DC jack is loose, took the laptop apart, pressed down on the dc jack to hold it in place, and stuck the power cable back in. Tried to wiggle the cable around to see if the jack is bad. But it feels pretty solid, it's just the housing holding the dc jack in place that's broken.
But I'm still getting the little white light beside the dc jack blinking repeatedly non-stop. No system power.
Question is.
1. Is the DC power jack bad and needs to be replaced or.
2. There is a short in the motherboard and the motherboard needs to be replaced.
I have check all over the internet for what the white light blinking means. I've found no answer.
Could someone please tell me what is wrong with this computer?

I already encouted this problem yesterday and I want to share this information on how I was able to fix this issue where in the dc jack blinking repeatedly and the laptop wont turn on. This issue is resulted due to overheat so laptop automatically shutdown and results to some kind of hibernation.
1. First you need to dissamble your laptop (compaq cq60). To clean the exhaust fan. I cleaned it because it was very dirty. I used my laptop for almost five years. If you dont know how to dissamble your laptop, you can check the tutorial from youtube. Just be very careful.
2. After Removing all the parts you can use a brush to remove all the dust inside your laptop. After cleaning all the dirt inside the laptop you need to let the motherboard cool for 1 to 1.5 hrs.
3. When you put the dc jack dont put the battery. So once you plugged the DC jack you can see if the light beside the jack still blinking or steady.
4. Once the light is steady., you can now power on your laptop. and a message will appear that your laptop overheated.
5. You can use cooling fan to prevent from heating.
6. Clean the parts inside your laptop every half year. to remove dust that cause the exhaust fan not to work properly.
Now I was able to use my laptop again.
Best Regards to All!
Algerico

I am very annoyed at the Creative Cloud set up and the non-stop issues and problems

I am very annoyed at the Creative Cloud set up and the non-stop issues and problems! I am paying monthly for this service and it is constantly failing in some way! So far in three months I have had to uninstall and re-install Photoshop THREE times because it stopped working properly and Illustrator I have had to do that same to TWICE! That isn't including the other apps that have had issues! I don't have the time to constantly be un-installing and re-installing all or some of the Creative Cloud because your developers are not making a product that works consistently for the money you are charging! It is costing me more than just this monthly fee! And I am even less impressed with the fact that I cannot email someone for assistance in resolving these issues. Really Adobe?

Adobe contact information - http://helpx.adobe.com/contact.html may help

Firefox 4 freezes after i open it (keeps loading the page non-stop and i cant click or do anything

firefox 4 freezes after i open it (keeps loading the page non-stop and i cant click or do anything, plus there is no option to report an error so i cant even get this checked and this seems to be the case on 3 different computers i use all have windows 7 32bit.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

When SLEEP is selected manually the fan spins at maximum speed non-stop

Hi,
I have HP Pavilion Elite HPE-180t PC, WIndows 7, Home Premioum, 64 bits.
Occasionally, I put the PC into sleep mode manually if I am finished with my work. Here are the steps I do:
1. Press Start
2. On the Shut down drop down list select Sleep
3. PC turns the fan speed up for a few seconds and then goes to sleep with the power button changing color from blue to yellow.
But once in a while on the third step the fan speed is cranked up to maximum (quite noisy), the button goes from blue to yellow, but the fan keeps running at maximum speed non-stop.
In these situations pressing any key on the keyboard doesn't affect this state i.e. the fan keeps running, and the PC is unresponsive to any keyboard or mouse input.
The only way I found to remedy this case is to press and hold down the power button until the fan stops and the PC shuts down completely.
Any suggestions on how to avoid the freeze up while going to sleep mode manually?

Hi,
I have the same motherboard in my HP e9280t. Open up your PC and use a can of compressed air and blow the dust out of the CPU heat sink, power supply, video card and system fans.
Open up the RUN window and enter: msinfo32
If msinfo32 doesn't show the bios level then you will have to boot into computer setup and find the bios level.
Look for the bios level. Bios version 5.29 is the latest and I have been running that level for a long time without issues.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Just got a new macbook air I added 2 google email accounts to the mail program. The mail downloaded thousands of emails and now on the top right hand corner I get bombarded by notification of these emails from 3-4 years ago and it is non stop.

When I added 2 gmail accounts to my new macbook air. The email program download thousands of emails and now I am getting notifications non stop on the top right hand corner from years ago it is non stop notification for the emails from like 2007 really old emails. I am not sure why it is notifying me of old emails I know it is new just downloaded in the program but it should only notify me of recent emails shouldn't it?

If your email client (Mail) it set to never delete emails from the server, they stay there waiting. The server doesn't track what you've already downloaded, so a new setup of Mail just grabs whatever it finds on the server. You can change this in Settings, but for now, you have all your old emails to sort.

Problem with non-stop looping

This file has been supposedly changed from As2 to As3. It seems as if it used to stop when I first got it. But the links didn't work. When I followed troubleshooting protocols, it started looping non-stop.
Please help. I can't seem to attach the flv and the action script files. All I get from the output window is "Fonts should be embedded for any text that may be edited at runtime, other than text with the "Use Device Fonts" setting. Use the Text > Font Embedding command to embed fonts."
Please help. I paid a coder to switch the file from as2 to as3 and this is what he gave me...

contact that coder and let them know the problem. if it's a problem with their code, they should fix it without charge.

Curve 8520 Non-Stop Rebooting and stuck on reboot mode. HELP

My phone is on this weird state now that it freezes and nothing happens, not even the little watch comes out and so I have to reboot it. But when I do, I have to use it non stop doing whatever for about 3 hours or so, not being able to leave it alone because if I do, even for a minute it will freeze all over again and the process will start over.
But also, sometimes when I reboot it, it doesn't being to reboot. It just stays with the screen shut off and eventually the little red light would turn on and off but nothing else will happen. I left it in that state for about 10 hours and nothing.
Right now it has been frozen for almost an hour, Ive had to reboot it about 25times today and I´m beginning to give up and getting scared for my phone.
Can't anyone please help me with a solution or proposition?
Thanks in advance.

Hello AnaVS and welcome to the BlackBerry Support Community Forums.
I would suggest you reinstall your BlackBerry device software. It sounds like something is malfunction causing the rebooting.
Do you have the Desktop Software installed? If not, you can download it at www.blackberry.com/software/desktop
After it is installed, connect your BlackBerry and back up your data.
Once you have backed up, follow the steps in KB11320 to reinstall your BlackBerry device data. Once the reinstall completes, test before restoring ANY data.
If the same thing happens without any data on it, you will want to contact your mobile carrier for further investigation.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Running The Mac Mini Non-stop

Does anyone have experience or an opinion on running the Mac Mini continuously non-stop for long periods of time (e.g. months)? Let's assume that sleep mode is disabled.
How will this affect the reliability of the machine?
I do this to my PC and they seem fine. Just wondering if the Mac Mini will do okay.
Mac Mini Intel Core Duo 1.66GHz; 2 GB RAM; OS X 10.4.6

A few quick items:
1) I agree with all who posted. You should have no problem leaving the Mini on indefinitely.
2) Go to your System Preferences and select the Energy Saving Option (It looks like a light bulb). Check off to turn the Hard Drive off when possible, Select Sleep, Never and set your monitor to power down when you want it to.
3) If you have a broadband internet connection where it is always on, you want to make sure your firewall is up. Go to System Preferences, select Sharing and then select Firewall. Turn it on for your protection. You probably don't need it if you have a router, but just in case.
Good luck!

Can an error in battery cause a slow CPUS and the fan to run non-stop?

tthe battery need serviced but my computer runs slow and the fan is running non-stop. MacBook Pro 13" purchased around 2011.

OK, you really need to dump that Windows attitude quickly, because what worked over there is completely useless here. I never understood the "upgrade didn't work obviously, because this or that happened, so how do I downgrade." I hang out around here, and I haven't seen many comments about fans running full blast after the updates. I did them, and nothing happened.
First, you can't downgrade the firmware EFI update. I think if you tried, it would brick your MBP.
You could reinstall Lion if you wanted, but that's really a pain, and once again, one of those Windows things that people always do that wastes time. A security update and Remote Desktop Client (which only runs if you start it up) would not effect your fan speed.
Apple does have "restore points", but it's a real backup system that requires a backup drive. It's called Time Machine and it's preinstalled on your Mac, easy to use, and allows you to go as far back in time on your Mac as the size of your backup drive will allow.
Now, after all that, let's try to figure out what's going on with your fans. First, did you do the EFI update correctly? Meaning did you do it when the MBP was actually plugged into the wall? What are you running? Games? Videos? Something else?

IPhone 3g non stop rebooting itself. Please help!

Hi, I have a iPhone 3g, and last night i replace the batter on it. After 12 hrs later the phone is non stop rebooting itself. Please help!

EDIT- what do I do to fix this? I have no Apple care, but I might just go to an Apple store in a mall over twenty miles away if there is no solution

WL 7.0 on HP Non-Stop platform

Where can I find out information on WLS 7.0 on the Non-Stop platform. I understand
its suppose to be released on June 30.
Who's JVM is it using? What version of Java?
Who is testing it and are there any Beta customers for it?
Thanks
Tom

Tom:
I don't know that anyone on the newsgroups can answer this in a ton of
detail, I do suggest you contact your sales rep. From what I know we (the
WLS engineer team across 4 sites) worked very closely with the Non-stop guys
to get their VM up and running and we "fixed" a couple of bugs along the
way.
http://h71033.www7.hp.com/object/BEAWLSDS.html
Cheers
mbg
"Tom Gerber" <[email protected]> wrote in message
news:3ef756e2$[email protected]..
>
Where can I find out information on WLS 7.0 on the Non-Stop platform. Iunderstand
its suppose to be released on June 30.
Who's JVM is it using? What version of Java?
Who is testing it and are there any Beta customers for it?
Thanks
Tom

I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything

Hi, I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything. My ipad rebooting every 2 or three minutes

See Here
iPad Unable to Update or Restore
http://support.apple.com/kb/ht4097

Why is iPhoto doing this none stop?

My iPhoto does this none stop.
I've restarted.
I've restarted the computer, deleted the plist file and it still does it none stop no matter how long I leave it open.
Is there a quick fix. It started this after I created another library.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

As described in the header, my Apple TV (120GB) has its LED blinking amber non-stop, no video, no audio. It is about 2 months old and I have never had issue with it before.

As described in the header, my Apple TV (40GB) has its LED blinking amber non-stop, no video, no audio. It is about 2 months old and I have never had issue with it before.

They stopped making that model four years ago. There is no way it is two months old. Trying connecting it to a computer with iTuens via a USB cable to see if you can re-install the firmware.

HP compaq 6720s fun none-stop

Similar Messages

Maybe you are looking for