HP Compaq 8000 Elite power supply upgarde

I have a 2010 HP Compaq 8000 Elite and need to upgrade the power supply in order to run my new Radeon HD 6850 Graphics card. After much research i found that this particular computer's motherboard does not have a normal 20-pin or 24-pin power supply but instead uses 2 separate 4-pin connections for the PWR and PWRCPU supplies and a third cable which i believe to be an ancient and outdated 6 pin auxiliary power cable (http://www.playtool.com/pages/psuconnectors/connectors.html#aux) for the PWRCMD supply. I Also found that all power is run through the motherboard to each separate piece of hardware in the computer and therefor most likely has a limit for the max power supply possible. Is there some sort of power supply that will both fit in the PSU slot (which is not the standard PSU size, but instead measures about 6" x 5.75" x 3.75") and will also be able to connect to and supply enough power to the mother board?!? Or am i stuck with a lousy 320W??? Please Help!!!
Service Map: (http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01944841/c01944841.pdf)
Similar Case: (http://h30434.www3.hp.com/t5/Desktop-Hardware/replacing-PSU-on-HP-COMPAQ-8000-ELITE-Convertible-Mini...)
This question was solved.
View Solution.

Maverickv2,
You will not be able to upgrade that PSU, model # 508154-001. It is not possible with those connectors. The most absurd item was that the hardware (drives) actually are powered off the motherboard. (Just like you said).
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

HP Compaq 8200 Elite Microtower Power Supply

Hi, can help me to recomended some Power Supply product to replace mine on my pc HP Compaq 8200 Elite Microtower.. I'm having trouble finding the appropriate product to buy.. i've confused with 6pin Aux. In this PSU just have contained 3 cable connector. 1 x 4 Pin CPU 1 x 6 Pin PCI-e 1 x 6 Pin Aux I'm in Indonesia, is HP Indonesia office supply spare parts to buy? Please help me.. Thanks.. 

Hello joaquinn07,
I understand that you are looking to replace your power supply and are seeking advise. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Business PCs - Compaq, Elite, Pro.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Do I need to replace video graphic card or power supply unit on hp compaq presario sr2180nx

hello all
i saw a similar post over 4 years ago, however it doesn't address my issue.
my pc started stalling when i attempt to turn it on. It wouldn't come on. Then after several tries every now and then it would come on. I was told through searching that it could be the video graphic card or the power supply. Therefore once i had the computer back on. I never shut it off. However, i could reboot and it would come on.
Now it won't come on again. So i don't know what to replace. The video graphic card or the power supply. If it is the graphic card, do i replace the one previously installed or add a new one. And if adding a new one, what is recommended to be compatible with my 300 watt supply unit? I'm lost as what route to take and how.Below are the details of my unit.
HP/Compaq Presario SR2180NX desktop PC with a P5LP-LE motherboard with an Integrated graphics using Intel GMA 950.
*Integrated video is not available if a graphics card is installed.
Also supports PCI Express x16 graphics cards
300 watt supply.
thank you in advance for any help you can give me.

Is there an add-in video card in the slot? If so, remove it and try to turn on. If the problem is the video card it will turn on. If not it is the power supply.

I need help to replace my power supply for the hp pavilion elite m9510f

This computer has given me many problems since I bought it in '09. From graphic card fan issues, a hard drive crash, and now the power supply has failed.
I did the blow dryer trick but it still ends up breaking a week later. I want to know what new power supply should I buy. One that will be able to fit in the hp pavilion elite m9510f and is an upgrade to the 350w that it has. Maybe somthing under 60-70 dollars if possible. Thanks for any help.

It appears to be a normal case and motherboard. A normal ATX supply should work: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=50001333&IsNodeId=1&Description=Computer...
Just an example of what is availble, but most any should work as long the physical dimensions match the one installed now.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Replace Compaq power supply

I need to replace the power supply on my computer
Compaq dx2450 Microtower
The current PWS is a Bestec ATX0300P5WC
Thanks to indicate me a solution for replacement
This question was solved.
View Solution.

Hi,
It use 300W PSU, pleae use the following link for part #:
   http://partsurfer.hp.com/Search.aspx?SearchText=KA574UT
You can try (for the first part):
   http://www.amazon.com/HP-463317-001-Power-supply-Watts/dp/B00DUG5L3C
or second part:
   http://www.amazon.com/463318-001-Hewlett-Packard-300Watt-Power-Supply/dp/B00HJKOK9G
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Compaq CQ56-115DX Recalled Power Supply & Dead Motherboard

Hello,
We currently have a Compaq CQ56-115DX in our shop that we are diagnosing. Currently the computer turns on and sits at a black screen while the caps lock light blinks repeatedly. Upon further research we have found that it may have an issue with the bios. We are unable to get anywhere past that black screen so we cannot update the bios. We have tried pulling the CMOS battery and letting it sit for a bit in hopes that it might reset the bios. Unfortunately that didn't work. We believe the motherboard is bad. Looking at the support page for more resources I saw that there was a recall on the power supply for this machine. I went through the confirmation pages and the adapter is one of the affected models. Is there a possibility that the power supply could have caused the motherboard issue?
Thanks,
ST

It is actually a recall on the cord from the power supply brick to the wall plug, not the brick itself. If that goes bad you just get no power at all so the power supply is not the likely culprit. Is there any evidence of melting or arcing on the power supply at the place where the wall cord plugs into the brick? Does it put out power to specs? I would agree with your motherboard diagnosis, by the way.

Compaq PDP124P Power Supply

Hello. I have a few computers HP Compaq DC5000 HP Compaq D530, they all got burnt power supply. Could you send block circuit diagram so that I could repair these power supplies and computers to bring them into working condition. Model unit Compaq PDP124P.
This question was solved.
View Solution.

I have posted my final versions of the schematics of the power supply.
I may add a block diagram later this year.
You may find my drawings on my Dropbox public folder by clicking on the following link.
https://www.dropbox.com/sh/bamvvcypfego3sm/AADVSj5NLXpoi7sSjkeF_vs0a?dl=0
I do not offer repair services.

Is there any way to change the power supply on a hp elite 8100 sff

hello . Is there any way to upgrade the power supply from the standerd 240W psu . the pc is a hp elite 8100 sff ( quad i7 2.8ghz nvidia quadro 295 nvs and 8 gb ram )

Joleney-
I do not know of any way to turn off the Sleep button. If yours does not work, there might be an internal problem like a loose connection in the iPad.
One thing you can try is to hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow if it appears. If successful, the iPad will restart after a couple of minutes.
If the Apple logo never appears, it is likely your Sleep button is bad. If the iPad is still in warranty, show it to an Apple Store Genius. You may get a replacement iPad if the Genius can not fix it.
If the iPad is out of warranty or there is no Apple Store near you, look for an Apple Authorized Repair Center near you. There may be one in your city. If out of warranty, the cost of a repair would most likely be less than Apple's replacement price. <Apple Authorized Repair Centers>
Fred

New power supply and graphic card for Compaq CQ3232L

Hi all,
I am using Compaq CQ3232L and would like to upgrade the graphic card with one of the HD 5770, Sapphire HD 5770 Vapor-X 1Gb 128Bit DDR5 to be exact.
My current power supply (Bestec Model ATX01...) specs are:
+12V/11A, peak 13A
+5V/10A, +3.3V/10A,
-12V/0.3A, 180W according the manual.
I've been looking a replacement for the power supply but not sure which one will fit the case? And how much power will be need to run the Sapphire card and future upgrade (Blu-Ray drive and another HDD)?
Regards,
Eko

WSH, besides measuring the PSU, you should assure that there is sufficient space for the video card. Open the case. Measure from the edge of the case to the opposite side of the motherboard where the PCIE slot is located. This is the approximate length of the card that will fit.
Also, I like OCZ and Corsair PSU's. They are both enthusiast/gamer manufacturers. Their products will provide clean, stable power for your system.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Elite m9200t. Just quit working. Does not go into bios. new power supply - nothing but fans.

HP Elite M9200t
Windows 7 32-bit
Error Messages: None
No changes made to system.
I hit the turn-on button one morning and nothing happened. Looked in the case and was running except the case fan. No lights were on. I tested the power supply and it tested good. Tried again - nothing. Connected a new power supply and tried again; Lights worked and cpu fan worked, but no attempt at boot.
I have disconnected everything - same result.
Does this sound like a bad ASUS mortherboard?

Heather, the PSU for the first gen G5 iMacs and the ALS models are the same physical size, but the ALS PSU is an auto-switching 110-220v model. Nice to have, but not the cause of the problem if it is working correctly.
Is your first gen one of those effected by the Repair Extension Program? If so, you actually have 2 years on problems related to the PSU and video.
Give Apple a call back and see if they have any suggestions, but don't let them put you off as you are still within the warrantee.

Compaq Presario Cq1-2025. Do These Have A Power Supply?

Have one of these that just stopped powering on. I get a little green light in the back, but no sounds or beeps or images. On a regular desktop computer I'd just replace the power supply and I'd be good to go, but I don't think these have a separate PS, and are more like an overgrown laptop, with a chunk of the mobo dedicated to providing the power.
Is this a candidate for the local recycling bin?
This question was solved.
View Solution.

Hi,
It IS the power supply. As in my first reply, it uses a similar PSU with a laptop.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Picolit Power Supply Unit

I have the following PSU in my Envy 750xt: IPS,ATX,Picolit,500W,EStarBronze,5Vsb/4A - 746177-002
My question is will this PSU work with an uninterruptable power supply that outputs a stepped sine wave (only when on battery power)? I am also curious if this PSU uses Active PFC.
Thank you.

The P/S requirements are overstated.
The card draws a max of 29 Watts and is a favorite to install in the HP business desktops with the 240 W P/S.
It is also the optional graphics card on the HP Elite 8200 SFF with the 240 W P/S.
You can see this thread for more info.
http://h30434.www3.hp.com/t5/Desktop-Hardware/DC7800-Memory-Compatibility/m-p/2547399/highlight/true...
http://h30434.www3.hp.com/t5/Desktop-Hardware/graphics-card-for-HP-Compaq-dc7800/m-p/1228843/highlig...
There are many other threads like the above two.

Help! power supply

i bought a compaq CQ5110Y and wanted to get a ati radeonHD 4650 1gb ddr2 pci E video card but this video card
needs 400W. I have a LC-B450 E power supply from my other pc and i was wondering if i could replace it with this one.

Hi, Rennwerkes.
have a look here:
http://discussions.apple.com/message.jspa?messageID=9285919#9285919
here
http://discussions.apple.com/thread.jspa?threadID=1967590&tstart=30
and here:
http://jimwarholic.com/2008/11/apple-imac-g5-power-supply-issues-and.php.
I think i saw new PSUs in the US offered for about $140. Here in Europe they are twice as expensive...
however, temperature problems might indicate a different source for the problems. Are the venting channels clean and the fans running? The G5 processor is quite hot - since short i have an Intel, and it's much less heating up! - especially if you have graphics or many windows open. (It depends also n which model you have)
There are also DVM's (Digital Voltmeters) with which one can measure a capacitor, but my attempt to do this with the capacitors on the PSU was not successful, probably due to the residual capacity of the surround print parts.
If you have access to a decent fast oscilloscope, you can check the PS voltages. If they are stable and without spikes, then the PSU is fine. If they are spikey, then a new capacitor can help.
Hope this helps
Thomas

I need help finding a power supply

I need to find a power supply that is compatible with my Compaq Presario SR5816F
It needs to have a minimum output of 12v @ 18 amps and have at leaast 350 wattts...
thanks.
This question was solved.
View Solution.

See my reply to your later thread:
http://h30434.www3.hp.com/t5/Desktop-Hardware/Will-this-power-supply-work-with-my-PC/m-p/4292292#M85...
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Power supply reuse

Hi,
I'm trying to give my good old Compaq Presario Windows 95 computer a new life. That is to use the cabinet and the power supply (+12V, +5V, both very interesting) for a project for which I was to buy a power supply anyway.
So I was thinking, let's give this old beast a new life. Af least it saved the environment of another part of electronic waste.
By the way, the power supply is a MITAC SPU-75.
I am aware that the reuse of PC power supplies usually requires a few rules to follow. There should be some load on the +5v and one of the connecting wires needs to be put to ground to convince the power supply it is supposed to be "on".
That's what I thought until I tried it with this little beast. Being an old Compag the connectors are non standard, 2x 6 pin.
Does anyone have experience in reusing this type of power supply?
Regards,
Reinhold
This question was solved.
View Solution.

Could you please give me the exact product number for your computer?
If you need help finding it, you can use the following link:
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=c00033108&...
Thanks,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP Compaq 8000 Elite power supply upgarde

Similar Messages

Maybe you are looking for