HP Compaq d330 uT d330m/P2.8C/40bc/128F/4

Dear Sirs,
We are getting message INPUT NOT SUPPORTED on the display
Kindly advice why we are getting message INPUT NOT SUPPORTED, IN CASE IT IS IS BECAUSE OF DRIVER FOR VIDEO,
request to let us have the driver
S/N of CPU[edited by Moderator], P/N PD409PA#ACJ
Best Regards,

Hello MRishikesh,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are looking for what inputs are supported on your HP Compaq Business Desktop d330. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

Trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on

trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on help a newbie please
This question was solved.
View Solution.

You can try removing and reseating the memory and see if that works.
If that doesn't work, remove all but one memory module (if the PC has more than one), and see if the PC runs normally with one memory chip. If it beeps, remove and replace with the memory you removed and keep doing that until you find the bad memory chip.

Installing win 8 or 10 operating system

Hello,i'v got a compaq d330 ut desktop Pc to arrange for free to a needed student with the promess to format all/ however, as i don't have the original cd's of this machine ' i tryed to install win 8 os and the process is stop in the middle with an error code 0xc0000428 popup ps. how can i fix
sorry for my English

Hi:
That PC is too old to run W8/8.1 or W10. The BIOS will not support it.
It might be able to run W7 but you would need to install an experimental graphics driver.

Compaq 615 crashed. Cannot install the recovery from the partition

Hi,
I got a crash on my compaq 615. I want to restore my comp/windows by using my recovery on the partition but it didn't work.
I want to put a new windows 7 on my comp by usb/dvd but it also didn't work. During the install the windows fily copy is ready(100%) in a few seconds but the next step: windows file extracting stays on 0%. Every time i try.
When i turn the laptop off and start it again there is the following message:
1720-smart hard drive detects imminent failure (failing attr C8)
What can i do? What's the problem? Can anyone help me out?

Hi:
Your hard drive has conked out, and you need to purchase a new one.
Then you should be able to reinstall W7.
Paul

Hi,please suggest me some games for Compaq CQ62-105TU Laptop.Can I upgrade my laptop's graphics card

Hi,please suggest me some games for Compaq CQ62-105TU Laptop.Can I upgrade my laptop's graphics card

Unfortunately, you cannot upgrade the processor or graphics card on this laptop.
Here is a page from CPU-World that gives the specs for your processor:
http://www.cpu-world.com/CPUs/Bobcat/AMD-E%20Series%20E2-1800.html
You will see down near the bottom of the page that it is not upgradeable. Some laptops come with the processor soldered to the motherboard. Almost all laptop graphics are this way. The only way that you would be able to get a faster processor/better graphics for this laptop would be to purchase a brand new motherboard. You can do an Ebay search for 'HP G6 motherboard' to see what average prices are if you want to go this route.

Hp compaq nc4200 drivers for windows 8 iam very sad because am not found thise drivers

hp compaq nc4200 drivers for windows 8 iam very sad because am not found thise drivers in any sits please anser me quq
thanx

Hi,
Besides britishdhez's suggestion, we also try to get your apps and devices working in
Windows 8.1 in compatibility mode:
Get your apps and devices working in Windows 8.1
http://windows.microsoft.com/en-IN/windows-8/get-apps-devices-working
Karen Hu
TechNet Community Support

Memory upgrade for HP Compaq 6000 Pro SFF

Hi all!.
I've got a problem for upgrading RAM memory on my HP Compaq 6000 Pro SFF. In fact, upgrading is from 2GB to 4GB.
I think all technical details are the same ones. So, there're two memory modules on my PC (ELPIDA 1GB 1Rx8 64 bit DDR3 1333 PC3-10600 CL9 240 DIMM).
Now, I'd like to install only a new 4GB memory module from Kinsgton (KVR13N9S8/4 - 4GB 1Rx8 512M x 64-Bit PC3-10600
CL9 240-Pin DIMM).
Finally, there's a 5 beeps cycle sound at PC power on. So, machine doesn't work. Would you mind to write down what's the problem?
Thanks very much.

Do you have a black memory slot and 3 white ones? Which slot are you putting the 4 gig DIMM into? Have you tried it with the 4 gig in the black slot and the 2 x 1 gig modules in the white slots?
Your Manual

Problem to get 3d work on HP Compaq Business Desktop dx2000

I bought a brand new HP with linux - mandrake - a month ago. I installed mandrake but then I got so confused that I through it all away and started on again with Archlinux that I have become used to.
Everything (well, of course not everything but most :? ) works all right but a few things doesn't.
First I couldn't get CUPS to work properly but that I solved - but don't ask me how. I think I did the same things over 5 times and then suddenly it worked as it should.
Then I had problems with the sound - but that worsk now after following the wiki.
Then I had problems with playing CD and DVD but that I managed to get to work.
But now I am stuck.
The 3d doesn't work. I tried to install all 3d modules I could find in arch but no result. I tried through hwd -e and lokalsed the modules named there with no result. I even tried NVIDIA (the computer have a intel graphics on board and no Nvidia-card) with the result that now the CD can't play sound-CD and the DVD doesn't work for multimedia despite newest xine and mplayer, koffeine etc I installed.
So I have 3 major problems:
1) the 3d card I want to start working
2) the CD-rom should be able to play sound-CD
3) the DVD should be able to play dvd-films.
Some hard-data:
HP Compaq Business Desktop dx2000
Intel celeron with MMX technology 2.6 Ghz and 400 Mhz system bus
Integrated ADI AD1888 Audio
Integrated Intel extreme Graphics 2 with GDI/GDI+ and Direct Show controller
Graphics memory 16 Mb + extra through Intel Dynamic Video Memory. Complete OpenGL 1.3 support.
2 DVD-drives installed Toshiba Samsung
Any one that could giv me a hint on how to start the solving of this?

These modules I have loaded:
% lsmod
odule Size Used by
dummy 3460 0
ehci_hcd 35332 0
i810 86420 0
snd_pcm_oss 56612 0
snd_mixer_oss 21120 1 snd_pcm_oss
snd_intel8x0 34336 1
snd_ac97_codec 78176 1 snd_intel8x0
snd_pcm 101252 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 27140 1 snd_pcm
snd 59108 8 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 10848 1 snd
snd_page_alloc 10244 2 snd_intel8x0,snd_pcm
parport_pc 28996 1
lp 12296 0
parport 38600 2 parport_pc,lp
usb_storage 71232 0
uhci_hcd 34576 0
eepro100 30988 0
e100 36992 0
mii 5760 2 eepro100,e100
usbserial 31336 0
usbcore 125560 5 ehci_hcd,usb_storage,uhci_hcd,usbserial
when I try hwd -e this results come:
% hwd -e
HARDWARE DETECT ver 4.1.2
Starting... (expert mode)
Detecting pci, usb, and pcmcia devices.
PCI DEVICE
VendID DevID Module Description
8086 1050 "e100" "Intel Corp.|82801EB (ICH5) PRO/100 VE Ethernet Controller"
8086 1229 8086 1050 "eepro100" "Intel Corp.|EtherExpress PRO/100 S Server Adapter"
8086 244e "hw_random" "Intel Corp.|82820 815e (Camino 2) Chipset PCI"
8086 24d0 "i810-tco" "Intel Corp.|82801EB ISA Bridge (LPC)"
8086 24d2 "usb-uhci" "Intel Corp.|USB Controller"
8086 24d3 "i2c-i801" "Intel Corp.|82801EB SMBus"
8086 24d4 "usb-uhci" "Intel Corp.|USB Controller"
8086 24d5 "snd-intel8x0" "Intel Corp.|82801EB AC'97 Audio"
8086 24d7 "usb-uhci" "Intel Corp.|USB Controller"
8086 24db "ata_piix" "Intel Corp.|82801EB ICH5 IDE"
8086 24dd "ehci-hcd" "Intel Corp.|USB Enhanced Controller"
8086 24de "unknown" "Intel Corp.|82801EB USB EHCI Controller #2"
8086 2570 "intel-agp" "Intel Corp.|82865G [Springdale-G] Chipset HostBridge"
8086 2572 "Card:Intel 865" "Intel Corp.|865 Chipset Graphics Controller"
PCMCIA DEVICE
no pcmcia driver in /proc/devices
VendID DevID Module Description
USB DEVICE
VendID DevID Module Description
Press any key to continue...
HD PARITIONS
/dev/hda /dev/hda1 /dev/hda2 /dev/hda3 /dev/hdc /dev/hdd
MODULES
dummy ehci_hcd i810 snd_pcm_oss snd_mixer_oss snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd soundcore snd_page_alloc parport_pc lp parport usb_storage uhci_hcd eepro100 e100 mii usbserial usbcore
INFORMATION
hwd -s - generates howto and sample X configure.
% hwd - s
HARDWARE DETECT ver 4.1.2
Starting... : (simple mode)
Kernel : 2.6.10-ARCH
CPU & Cache: Processor 0 is Intel(R) Celeron(R) CPU 2.53GHz 2534MHz, 256 KB Cache
ALSA(sound): Intel Corp.|82801EB AC'97 Audio module: snd-intel8x0
Video : Intel Corp.|865 Chipset Graphics Controller server: Xorg (i810)
Monitor : MAX1b6c H:28.0-96.0kHz V:50.0-75.0Hz
Mouse : Generic PS/2 Wheel Mouse device: /dev/psaux
Hard Disk : SAMSUNG SP0411N device: /dev/hda
SCSI : No scsi disk
Swap : Swap found device: /dev/hda2
Scanner : No scanner
CDROM 1 : TSSTcorpDVD-ROM TS-H352A device: /dev/hdc
CDROM 2 : TSSTcorpDVD-ROM TS-H352A device: /dev/hdd
Floppy : 3.5 1.44MB floppy drive device: /dev/fd0
USB : USB found module: ehci-hcd
Ethernet : Intel Corp.|82801EB (ICH5) PRO/100 VE Ethernet Controller module: e100 device: eth0
PCMCIA : Detect PCMCIA cards run hwd -d
Modem : No pci modem
Howto : View howto run hwd -h
Testing : File /etc/X11/xorg.conf already exist!!
: Read more in howto.
in hwd - h the following part is about monitor:
XWindows:
Video Card : Intel Corp.|865 Chipset Graphics Controller
Monitor : MAX1b6c
H kHz : 28.0-96.0
V Hz : 50.0-75.0
Xserver : Xorg
Xmodule : i810
Mouse : Generic PS/2 Wheel Mouse at /dev/psaux module: msintellips
/2
anyone that can help me on?

Memory Upgrade on Compaq Presario V3839TU

I want to upgrade my laptop Compaq Presario V3839TU memory from 1GB to 2GB.. Is it possible to upgrade memory for this laptop? I don't know how many slots on this laptop, and what kind of memory should I buy if it has available memory slot? Can this laptop hold 2GB memory? Anyone ever upgrade memory for this laptop? Please help me.. Thx before..
This question was solved.
View Solution.

Hi,
kenzhong2 wrote:
I want to upgrade my laptop Compaq Presario V3839TU memory from 1GB to 2GB.. Is it possible to upgrade memory for this laptop? I don't know how many slots on this laptop, and what kind of memory should I buy if it has available memory slot? Can this laptop hold 2GB memory? Anyone ever upgrade memory for this laptop? Please help me.. Thx before..
Your laptop has two DIMM slots. The maximum amount of memory others have upgraded to is 4GB. The maximum recommended by HP is 2 GB. The replacement memory will need to be PC2-5300, 667Mhz ,1.8v
Here is a link to memory at Crucial.com. Only use replacement modules from major memory makers who produce guaranteed compatible memory modules to avoid the risk of buying incompatible modules.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Memory upgrade on Compaq 15-h050nl

I would like to know if it's possible to upgrade the ram memory on the Compaq 15-H050nl. I still can't find the maximum supported ram. My model runs Windows 8.1 64bit with 4 gb of ram. Is it possible to install 8gb? Thanks for the info.
This question was solved.
View Solution.

Robert.
Your manual here.
http://h10032.www1.hp.com/ctg/Manual/c04513485.pdf
Supports single-channel memory
DDR3L-1600-MHz Single Channel Support
DDR3L-1333-MHz Single Channel Support (DDR3-1600 downgrade to DDR3-1333)
Supports up to 8 GB of system RAM in the following configurations:
● 8192-MB total system memory (8192×1) or (4096×2)
● 6144-MB total system memory (4096×1) + (2048×1)
● 4096-MB total system memory (4096×1) or (2048×2)
● 2048-MB total system memory (2048×1)
Looks like 8GB max.
This link may apply to your model laptop???
http://h30434.www3.hp.com/t5/Notebook-Hardware/More-RAM-for-HP-Pavilion/m-p/4746402#M156507
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

I have a Presario SR5450F. Recently, it is very slow to boot up. It hangs up on the Compaq screen

I have a Presario SR5450F. Recently, it is very slow to boot up. It hangs up on the Compaq screen (Setup, Boot Menu, System Recovery, Diagnostics). It hangs up on that screen for at least 10 minutes, which is unacceptable. It just started doing this. Can someone please help me? Thanks.
This question was solved.
View Solution.

You're welcome goldcanyon1
Glad I could help. Thanks for sharing your problem and what device was causing it for you. Sometimes having too many USB devices can cause problems. Your camera might work if only the mouse and keyboard are connected. It is worth a try if you need to get photos from it. I have seen even on my custom built PC occasional "odd" issues that can arise from having a variety of different USB devices connected.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Microphone not working after upgrading to windows 7 on Compaq Mini 730EA.

My Compaq Mini 730EA came with Wins XP and I have just upgraded to Wins 7 Ultimate 32 bit. My Mic is not working with Windows 7, but it can play sound. When I roll back to Windows XP the mic works, but does not with Wins 7.
Where can I get the appropriate driver for the mic, please. Not driver? Then What should I do?
Thanks much in anticipation.

Since there isn't a driver to download the only thing you can possible do is delete the windows driver that the notebooks installs for the feature.
This is what it will look like.
Go under Human Interface Devices and delete every USB INPUT DEVICE.
Then restart the notebook and it should install the drivers back.
Also, you can follow this document. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01926155&tmp_task=solveCategory&cc=us&dlc=en&lc...
THX

I am trying to do a destructive recovery to a HP Compaq 6830s – XP Professional-

I am trying to do a destructive recovery to a HP Compaq 6830s – XP Professional-
I backed up my entire system to an external hard drive.
I made sure that I was set to start from cd drive.
I put disk 1 in and started computer, click on any key to boot from cd
Windows setup came up
Bottom of screen says Setup is loading files and it started loading a bunch of files took about 5 minutes
I get the error:
BLUE SCREEN
A problem has been detected and windows has been shutdown to prevent damage.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check for viruses on your computer. Remove any newly installed hard drive or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and restart your computer.
Technical Information
STOP: 0x0000007B (0xF78D2524, 0xc0000034, 0x0000000, 0x00000000)
I have checked for viruses, ran CHKDSK /F, and restarted my computer 5 times.

Hi:
That is interesting. I would have thought the recovery disks would have the SATA AHCI drivers installed.
Go into the BIOS and change the sata emulation mode from AHCI to IDE.
Save your settings there by hitting the F10 key and save again upon exiting.
Try your XP disk that way. It should install.
Then post back and I will give you the step by step instructions to change the BIOS setting back so the hard drive can perform a little better in AHCI mode which is why it is the default setting.
I may not be able to get back to you tonight, though.

Do I need to replace video graphic card or power supply unit on hp compaq presario sr2180nx

hello all
i saw a similar post over 4 years ago, however it doesn't address my issue.
my pc started stalling when i attempt to turn it on. It wouldn't come on. Then after several tries every now and then it would come on. I was told through searching that it could be the video graphic card or the power supply. Therefore once i had the computer back on. I never shut it off. However, i could reboot and it would come on.
Now it won't come on again. So i don't know what to replace. The video graphic card or the power supply. If it is the graphic card, do i replace the one previously installed or add a new one. And if adding a new one, what is recommended to be compatible with my 300 watt supply unit? I'm lost as what route to take and how.Below are the details of my unit.
HP/Compaq Presario SR2180NX desktop PC with a P5LP-LE motherboard with an Integrated graphics using Intel GMA 950.
*Integrated video is not available if a graphics card is installed.
Also supports PCI Express x16 graphics cards
300 watt supply.
thank you in advance for any help you can give me.

Is there an add-in video card in the slot? If so, remove it and try to turn on. If the problem is the video card it will turn on. If not it is the power supply.

Compaq Presario v6346ea: Which type of SATA controller?

I've recently bought an Intel X25-M/G2 Solid State Drive and was expecting read speeds of 200 MB/s on my Compaq Presario v6346ea notebook. Instead of that the maximum speed I get from CrystalDiskMark is 135 MB/s.
Now I'm suspecting the SATA controller of my notebook to not being able to handle the speeds of this Solid State Drive.
I've looked on HP's website to find out which type of SATA controller is used in my Compaq Presario v6346ea but can't find find any clear info on that subject.
From what I read at http://en.wikipedia.org/wiki/Serial_ATA there are 3 types:
SATA Revision 1.0 (SATA 1.5Gb/s, max 150 MB/s throughput minus overhead.)
SATA Revision 2.0 (SATA 3Gb/s, max 300 MB/s minus overhead.)
SATA Revision 3.0 (SATA 6Gb/s, max 600 MB/s and up minus overhead)
Does anybody know which type of SATA controller is used in this Compaq Presario v6346ea notebook?

Thank you for the additional info. I ran SISoft Snadra and found some interesting stuff. For instance, it IDed the chipset as a mcp78s not a mcp77. It also indicates that it can use DDR3 memory. I'm not sure if that's accurate, as it conflicts with specs I've read elsewhere. If true, I wish I'd known that when I upgraded my RAM to 8GB. :-p Anyway, I've tried to determine the SATA revision, but I'm not sure if I'm going about it the right way. I went to "Storage Devices" and clicked the only available button: "Physical Disks , Storage adapters and devices". From there I can choose my internal hard drive from a menu, and it shows the maximum SATA mode as G2 / SATA300. But I'm not sure if this is in reference to the controller or the drive. I know that the drive is a SATA-II, so it would show that if it's displaying the drive's capabilities. It certainly tells me everything else I'd ever want to know about the drive. When I switch to my external USB HDD, it shows the maximum SATA as G3 / SATA600. For the DVD drive it shows G1 / SATA150. So I kind of think it's showing me the maximum capabilities of the drives, not the controllers. Is there some other way to check the maximum SATA capabilities of the hard drive controller? Sorry. I'm not too familiar with SISoft Sandra, and it's not really obvious to me. And given what it's turned up about the chipset and the memory support, I want to be sure here. Thanks.

HP Compaq d330 uT d330m/P2.8C/40bc/128F/4

Similar Messages

Maybe you are looking for