Hp compaq d610 d40 laptop network port doesn't wake up

I have tried looking for a fix for this and can't find one so if there is one and i've missed, it my apologies but basically...
I have a hp compaq d610 model d40 and with the basic windows xp installation and the default drivers (hp) on, when the system goes into stand and then is brought out of the standby mode everything wakes up except for the network port and the only way to get this to wake up is to go into device manage and scan for hardware changes or reboot.
I have tried different drivers, bios changes (not update) with no luck but strangelly enough the other 3 makes and models of the same laptop work fine.
Now, before I look into bios updates has anybody come across this?
Cheers

You might consider sending it in for repairs
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260674058980
Symptoms may include the following:
Weird colored screen (grey, green, red etc..
Scrambled or pixelated screen
Divided split screen (2 screens up to 12 split screens)
Screen black however backlit
Screen black with no backlight however blue lights come on the quickplay panel
Turns on then shuts off immediatly
Turns on and beeps 3 times (1 long and 2 short)
Turns on, black screen and keeps restarting by itself
White or grey screen sometimes with horizontal lines
Press power button and nothing happens what so ever (seems dead) (mostly on DV2000 models)
Intel models boot to backlight but no screen
Cant load Nvidia driver, can only run in VGA mode
Screen works but no WiFi (does not show up in device manager)

Similar Messages

Network Port Doesn't Seem to worl - EVER

Hi yall,
I have an Airport Express. I originaly just wanted it to stream music to my stereo. But now that my TV, Blu-Ray and Wii all have network connections, I wanted to extend my wireless network.
I have a Dell XPS One computer with Vista and a Westell/Verizon Wireless DSL Router.
My computer is connected via cable to the router and I have no problem connecting laptops wirelessly to the network.
I used "join existing network" and the Air Tunes function works flawlessly.
Shouldn't I be able to plug into the ethernet port and get network connectivity from the Airport too?
Jason C

Does it make sense that Airtunes works perfectly?
Yes
Is another option to get a second Airport Express and connect with ethernet wire to the router? Then the two Airport epxresss should talk to each other, right?
Yes that will work.

Wake for network access doesn't wake

I have my computer set to wake for network access, but when my other computers in the house try to access the the Itunes library stored on my Mac, it won't wake up.

Do you have a Apple AirPort Base Station or Time Capsule?
Mac OS X v10.6: About Wake on Demand:
Wake on Demand requires an Apple AirPort Base Station or Time Capsule with firmware 7.4.2 or later installed.
Is the option on the computer: Wake for network access, Wake for Ethernet network access, or Wake for AirPort network access ?
Is the effected computer running 10.6?

Compaq Presario 1714EA (Laptop) (BIOS Update and/or Wake-on-Lan)

Hi guys, can anyone tell me if there is a way to update the BIOS on that Laptop or a way to make Wake-on-Lan work on this Laptop? Thank You

I'm fairly certain that there is not. HP locks out certain features from the BIOS, and there isn't much you can do to get them back.
Though I am an HP employee, I am not here as a representative for them. I am here of my own accord to help those requesting it.
Please demonstrate any appreciation for help with a kudos!

AT300SE doesn't charge if connected to Laptop USB port ?!!

Dear All,
I've just purchased Toshiba Excite AT300SE, it charges normally when connected to Power Outlet, but when I connect it to my Laptop USB port it doesn't charge, is that normal or I miss something ??
Thanks in advance

The AT300SE will "trickle" charge if it is connected to a powered USB port. Many laptops do not put out enough power via their USBs to charge.

LaserJet Pro 400 MFP not working on the network port that works HELP !!!

I have a new LaserJet Pro 400 MFP (M425dn) USB works fine. When I remove the USB and plug it into the network Port no network can be found - It doesn't pick up any activity. So I test the network with my laptop ( connectivity is confirmed ). The network port is working properly- I plug in the LaserJet Pro 400 MFP (M425dn) and restart it - no network activity. I tried several ports in the front office and the printer can't connect to the network. BUT HERES THE FUNNY THING . If I take the printer to the back room where the router/switch is and plug it directly into the switch
( the same port as the front port ) it works !!!!! so why doesn't the printer work at the front office network port, where all the other devices work just fine using the same port ? But it will work, at the router/switch using the same port lol this is drving me crazy
any help ? ? ?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Open additional network ports while running FileVault

I'm trying to run web based applications using non-standard network ports on my MacPro and having issues accessing the services locally from the laptop it's self.
I've enabled the builtin FileVault to encrypt the SSD to protect the laptop along with enabling the firewall, after which I've experienced the problem. Disabling the firewall doesn't allow access to the services however disabling the FileVault allows services on network ports to be accessible again.
This leads me to believe FileVault isn't just 'Disk Encryption' as I initially thought, but includes elements of firewall-ing non Apple approved applications/ports. There seems to be very little information about this anywhere on the web, unless I'm looking in the wrong place.
If this is the case, are there any commands that will allow me to 'register' an application or port with Mavericks as being allowed?

Thanks Linc that's what I needed confirmation of, I'll keep digging and comment back once I've solved.

Upgrading Compaq Presario V2000 laptop

hello everyone,
I am planning on upgrading a Compaq presario V2000 laptop i currently own. I heard that it cna can only run on PC2700 RAM with a max of 1gb per slot. Currently, I have 2 X 256mb sticks installed so i plan to remove one of them and install a 1GB stick and i was wondering whether this is compatible with the laptop:
http://www.shoppingsquare.com.au/p_3274_PNY_Sodimm_1GB_DDR333_PC_2700_for_Laptop
I also wanted to upgrade the hard-drive as 40gbs just doesn't cut it for me. Does anyone know whether the V2000 can hold two hard-drives? Also what hard-drives are supported by the V2000? Will any IDE 2.5" hard-drive fit in or does it only support 5400rpm drives?
Thank you,
Babaquazi

Your max memory is 2 gigs or 2 x 1 gb and yes it uses DDR333 SO-DIMM memory. Here is the Crucial.com page for it:
memory
Here is the Manual:
Manual
Turn to Page 5-6 for hard drive replacement. Don't forget to save the little connector piece that goes over the hard drive pins and place it on the new drive. There is only room for one (1) drive.
You can use any IDE (PATA) 2.5 inch laptop drive of any size and rotation speed. A 7200 rpm drive will boost performace significantly.
Not sure if you have the Intel or AMD version of the V2000 but the processor is also upgradeable if you happen to have one using the Celeron or Sempron processor.

Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5.

Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5. Dont know if I changed settings or something.

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

ThinkPad USB 3.0 dock network port has problems with our Cisco 6509 switch

We purchased a ThinkPad USB 3.0 dock for and X1 carbon and the main issue we are having is the network port does not seem to work with our Cisco 6509 switch. I tried updating the firmware on the dock but it still hasn't fixed the issue. I was wondering if anyone else had run into this problem with any other networks out there.

I'm seeing the same issue with a ThinkPad W520. When I connect my ethernet cable directly to the laptop, my internet speeds are on par with my service provider of 18 Mbps. When I move that cable to the dock, I will only see 1.5 Mbps. I have two displays attached to the dock and I'm running Windows 7. I've updated the dock firmware and have installed the latest system drivers. Is there anything else to try?

Compaq CQ61-407 Laptop

Hi, I'm thinking of buying a Compaq CQ61-407 Laptop but I need a fire-wire port on it.
Does anyone know if it is possible to upgrade the laptops ports to include fire-wire.
Thanks

HI ,you may need to change one .you can buy on HP office site ,if you don't want to pay too much you can buy online .and here is a suggestion http://www.askbattery.com/compaq-presario-cq61.html

HP Probook 6445b LAN port doesn't connect

I have a HP Probook 6445b and the LAN port doesn't seem to connect when I plug a cable in. Any Ideas????

try going to the "search programs" filed at the bottom of the Windows start menu and type in cmd and then right click the little black box icon and select run as administrator and then type in the "DOS box" the following and hit enter
ipconfig /all
And see what the output is. Let us know. I assume if you connect the same cable to a different computer it gets on the internet, etc?
You may want to check network properties of the wired ethernet connection to see if perhaps someone set a static network configuration that is not compatible with your router's settings.

How to recover from network port configuration deletion (airport)

a couple of years ago, i accidently deleted the network port configuration for AirPort in the Show pop-up menu. No big deal, i thought at the time. I don't have an AirPort card and I won't be using AirPort in this computer. Ok, I now have an old-style AirPort card (powerbook G3 firewire, 10.2.8) and the AirPort utility doesn't see that it's installed. I realized right away, the network doesn't have a port... so the system doesn't see it, right? So, how do I get this port back? Do I have to reload a new System entirely and not save previous network settings... or is there an easier way to recover from my blunder?

Thanks Rob,
Glad to be here. Yeah, 10.2 works the same as 10.4. The problem with what you suggest is that I can no longer get airport as an option in Network port configs... so when I go to the new button all the other options are there EXCEPT AirPort. This is what I need to restore. I haven't checked, but I'm assuming I've nuked the pref panel out of the master library. So, I've messed up big time. I was looking for a way to recover that didn't involve reloading the whole system. This isn't like OS 9 and older where you can go and pick a little piece and stick it back into your system folder... I think. Thanks for the reply.

Hi,please suggest me some games for Compaq CQ62-105TU Laptop.Can I upgrade my laptop's graphics card

Hi,please suggest me some games for Compaq CQ62-105TU Laptop.Can I upgrade my laptop's graphics card

Unfortunately, you cannot upgrade the processor or graphics card on this laptop.
Here is a page from CPU-World that gives the specs for your processor:
http://www.cpu-world.com/CPUs/Bobcat/AMD-E%20Series%20E2-1800.html
You will see down near the bottom of the page that it is not upgradeable. Some laptops come with the processor soldered to the motherboard. Almost all laptop graphics are this way. The only way that you would be able to get a faster processor/better graphics for this laptop would be to purchase a brand new motherboard. You can do an Ebay search for 'HP G6 motherboard' to see what average prices are if you want to go this route.

My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help!

My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.

Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk. Duh! The application for the home is in the mail.

Hp compaq d610 d40 laptop network port doesn't wake up

Similar Messages

Maybe you are looking for