Hp compaq dc5100 sff vs sapphire hd5450 512mb graphics card with lp bracket (11166-08-20r).

Can I install ATI radeon 3450(512 mb) in HP Compac DC5100 ?
Or would you please recommnd me that how could I play heavy games in my HP DC 5100!

Hi,W7 Professional 32-bit160Gb hard drive, 2.25Gb RAM Long story but was given this HP computer by a friend when a custom built Intel i5 over-clocked computer ceased to function. On receiving the i5 item I realised I could not hook it up to my existing screens and so my local computer shop sold me the above graphics card. i5 computer has now gone back to manufacturer leaving me with a graphics card that does not seem to fit in the HP motherboard despite its LP bracket. I am no computer expert but when I opened the HP case to offer up the graphics card it appears to have incompatible "contact surfaces" (don't know proper name); can anyone confirm that this is true?I don't want to force it or fit LP bracket etc if the card will not work with the HP computer.ThanksAndrew

Similar Messages

Fan runs super fast. HP Compaq dc5100 SFF

The last several days HP Compaq dc5100 SFF-- fan(s) have been running apparently superfast fan speed.
Was full of dust (to the point of blocking the intake on the front fan)
Used a AIR CAN blow dust out with cover open. We also had a brief power blip in the last few days--caused a shut down. And we updated some business software. Has been rebooted.
We have 3 other of same model which are OK
Thanks for any help
This question was solved.
View Solution.

The dc5100 SFF is notorious for bad capacitors on the motherboard. I had one where the fan ran at top speed all the time. There was a swollen capacitor located at the end of PCI slot 1. I believe it is C469. It is a 1000uF 6.3volt cap. I replaced the capacitor and that fixed the problem. Keeping the computer cool will lengthen the life of the capacitors. It is wise to periodically remove the dust so cooling air will flow. How ever, once a capacitor goes bad, the only fix is to replace it. A blown capacitor will be swollen. The normally flat top will be curved upward and possibly leaking a brown crusty material.

Drivers for HP 599980-001 ATI HD5450 512MB graphics video card

I am looking for the Windows 7 Drivers for a
HP 599980-001 ATI HD5450 512MB graphics video card
if someone could please help

Bocajoe, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Is the ATI Radeon HD 4870 512mb Graphics card good

I'm thinking about getting a new mac pro and i've been looking a this graphic card and i've also been reading comments about this card and just wondering is this card good at all.
null

I don't want to sound like a jerk but don't want people to wast their money because
You said
"If you have a 2006-07 mac pro, and want the most power you can get, crossfire two flashed pc 4870s."
That is wrong because a 2006-2007 mac pro only has ONE PCI.1.1 X16 slot you can only make it so you have two X8 slots or one X16 & one X8 To get anything from a CrossFire or SLI setup using any PCI X16 card you need two card slots that are X16.
I do agree & know if you have a 2006-2007 mac pro, then yes the apple 4870 is most likely the best you can get, besides going a flashing route. (I don't like to flash & the 4870 WORKS IN THE 2007 Mac Pro)
I have a 2,1. Mac Pro 8 Core 2007 & just got the New 2009 8 Core with 2.93 GHz Duel CPUs & I got the new GTX 285 came in the mail before the Mac Pro I got the 4870 from the 2009 to work in the 2007. But I have not tried the GTX 285 in the 2007 as the drivers have to be loaded from the disk that comes with it first & I did not take the time to do that & had the reformat the 2009 after trying to put the GTX 285 in the 2009 I found myself removing the 4870 I had just put in the 2007 then back in the 2009 then reinstall OS X 10.5.7 after that loading the driver disk from the GTX 285 first in the 2009 before placing the card the new Mac.
So I will when I have less work try the GTX 285 in the 2007 Mac Pro & let you know what happens.
I hope I was of Help
Thomas

Is My 512Mb graphics card enough to run Premiere Pro on Creative Cloud?

My graphics card on My 2009 Macbook Pro is :
NVIDIA GeForce 9600M GT
Will it be enough to allow me to run CC?

Even the cheapest current laptops would have far better performance with Adobe than that MBP. I would definitely start looking at a new solution.
Eric
ADK

No sound in Compaq dc5100 with XP Pro after system install

Hello
I got ahold of a Compaq DC5100 SFF desktop and installed a fresh copy of XP Pro using the key provided. I was able to retrieve all drivers except for the multimedia audio controller. I searched and searched for hours with no luck. Any suggestion on how to get the sound to work? I dont have the original install disk. XP Pro loaded with service pack 3
Thanks for any help
Kevin
This question was solved.
View Solution.

Try this Intel utility update then go to audio device and uninstall the driver and reboot.
Intel Driver Update Utility Intel Driver Update Utility
After you reboot then go back into Device Manager and find your audio drive and right mouse click then update driver and now search for driver on the network.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

New power supply and graphic card for Compaq CQ3232L

Hi all,
I am using Compaq CQ3232L and would like to upgrade the graphic card with one of the HD 5770, Sapphire HD 5770 Vapor-X 1Gb 128Bit DDR5 to be exact.
My current power supply (Bestec Model ATX01...) specs are:
+12V/11A, peak 13A
+5V/10A, +3.3V/10A,
-12V/0.3A, 180W according the manual.
I've been looking a replacement for the power supply but not sure which one will fit the case? And how much power will be need to run the Sapphire card and future upgrade (Blu-Ray drive and another HDD)?
Regards,
Eko

WSH, besides measuring the PSU, you should assure that there is sufficient space for the video card. Open the case. Measure from the edge of the case to the opposite side of the motherboard where the PCIE slot is located. This is the approximate length of the card that will fit.
Also, I like OCZ and Corsair PSU's. They are both enthusiast/gamer manufacturers. Their products will provide clean, stable power for your system.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How do i find a graphics driver for my hp compaq dc7100 sff

My computer is a Hp compaq dc7100 sff, the operating system that is install is windows 7 32bit
This question was solved.
View Solution.

Hi:
Please follow these instructions and see if the video driver installs.
Your onboard graphics adapter (GMA 900) is not Windows 7 capable.
I can send you the link to a driver that should make it work much better but you will never have Aero.
Here is the link to the driver.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=ob-472...
You need to run the package. It will extract the drivers and it will then give you an Operating system not supported error.
Close the error window and then manually install the driver by clicking on the video controller in the device manager. Then click on the driver tab. Click on update driver. Select the "Browse my computer for software method.
Browse to: C:\SWSetup\sp34749, make sure the include subfolders box is checked and the driver should install.
It should be a whole lot better than what you have now.
Paul

HP Compaq d530 SFF not recognizing DIMMs. Windows Vista Home Premium 32bit - BIOS version 02.44

Hello HP community!
I recently received a HP Compaq d530 SFF, from the company, where I had my work experience.
I gladly took their offer and took the PC home, all was going well until I bought myself some new DIMMs, from ebuyer.com.
I new for a fact, the computer needs DDR 333MHz, PC2700 and it had to be in DIMM format, so I went and bought 3x1GB modules. A few days later they arrived and I inserted them into the computer, making sure that two DIMMs were in the blue slots, and the others (I wanted to keep a 256MB module in) in the black slots.
I re-inserted the power cable and tried to boot the PC, it showed me a BIOS message, showing the amount of memory had changed, since the last boot. Once the configuration showed up, it only recognized the 256MB module. I then powered down the computer, to then remove the 256MB module, to see what would happen. I then rebooted the PC and it gave me an error tone (No picture). To which I then (rotatingly) tried each different DIMM, to see if one of them was defect. They all gave me the same error tone. Since then, I have been running Windows Vista Home Premium, with 1GB (4x256MB DIMM).
Does anyone maybe have a suggestion, how to solve this problem?
I have already updated the BIOS version to 02.44 (Latest I could find).
Thanks in advance!
Yours sincerely Simon Cahill
This question was solved.
View Solution.

Beatsleigher,
Not all memory is the same, even when picking PC2700. Did you purchase non-ECC?
Here is a guide on memory config for the D530SSF
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Video drivers HP compaq dc5100 MT

Can somebody give me the Multimedia videocontroller drivers for a HP Compaq dc5100 MT computer with a Microsoft Windows XP 32 bit system ?

Hi: That device is not standard or optional equipment on the dc5100. It decodes to a Pinnacle Studio DC10Plus video device. This site claims to have a driver for it and I was able to download it but I cannot open it to check its contents. https://driverscollection.com/?file_cid=40216920018b43ac3dfe953c930

How do i get my computer to boot up? Working fine yesterday. Compaq 100B SFF PC

Product name and number is Compaq PROMO 100BS/A350/500hq2V28f US [Compaq 100B SFF PC (Adina)]
Operating System is Windows 7 SP1
S.M.A.R.T. Test Diagnostics said - Failed Error Code - BIOHD8
Yesterday computer working fine. Was transferring documents and pictures from old computer to this one, using an HP memory stick. Shut down after I was done, and today it won't boot up.

Antz, welcome to the forum.
The error message that you received is due to a failed hard drive. I suggest running the test again from the BIOS to see if you have the same outcome.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Drivers-Compaq cd7700 SFF

Hi,I am looking for drivers for Hp compaq cd7700 SFF (network, video, audio, board and any other relevant). My operating system (recently changed) is Windows 7. Thanks

I see no mention of 32bit or 64bit but HERE are the drivers for 32bit.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Microcode update error 1801 in hp compaq dc5800 sff

Dear sir,
we have facing a problem like in intial display sowing eror microcode update error 1801 in hp compaq dc5800 sff.
Please find the resulation.

Hi:
Did you install a different processor than the one that came with the PC?
If so, what processor did you install?
A microcode error means there is an unsupported processor installed or you need to install a microcode update to allow for support of the processor you installed if it can be supported in your dc5800.
Paul

HP compaq 5100 sff -hardware issue

Dear Sir/Madam
kindly be informed that i face problem with the hp compaq 5100 sff so many time , and what i want to do to make sure that there is problem with the hardware is to run diagnostic cd for it .
but i couldn't find in the hp download page diagnostic cd for it , and all the diagnostic cd that i found it in HP official website doesn't seem to working with this model and every time i tried to test it i get message to contact with the vender to get support .
so please advise me what i should do to avoid this issue.
many thanks

Hello,
Typically, this type of error is due to the RAM memory modules being used. There is more information here: http://support.microsoft.com/kb/101272
I suggest cleaning out your system with compressed air to ensure that the RAM is properly making contact with the system board.
-Chris
I work for HP.
Support Forums are now on your mobile phone: http://m.hp.com/supportforum

Audio drivers for HP Compaq dc5100 Base Model Small Form Factor PC

Hi guys cant get sound drivers for HP Compaq dc5100 please help

Hello Exodusme
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Hp compaq dc5100 sff vs sapphire hd5450 512mb graphics card with lp bracket (11166-08-20r).

Similar Messages

Maybe you are looking for