Hp compaq mini 110 bios pasword

hi there i am trying to recover my netbook boot i set a bios password and cant remember as it was a while ago
i tried it three times it comes up with password check error code CNU9403TGS could you help please with a reset code any help appriciated thankyou
This question was solved.
View Solution.

Try-- e9lov1fahn
Third character is small case L
regards,
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Similar Messages

Compaq mini 110 Bios pasword reset

compaq mini 110 CNU9275YOM pls master code... Thanks

Remove the bios battery and the battery waited for 2 days. When I try to reinsert the password again asked me.

Compaq mini 110 BIOS password help!!

Hi. Someone please help me. I just inherited a Compaq mini 110 from my grandmother and its asking for a current bios password it gives me this code CNU9423NXW. I tried the code I got from bios-pw.org but it doesn't work. What can I do? Help please!.

Hi, Firstly they are all lower cases, secondly the third character is a lower case of letter L and thirdly what is your keyboard ? You must use English (US) or English (International) keyboard. Regards.

Mini 110 bios pasword problem Can you give me a Bios unlock code for CNU9443DVL

Can you give me a Bios unlock code for CNU9443DVL
Tnank you in advace
Branko
This question was solved.
View Solution.

Welcome App. Try.
e 9 l o v v f t 6 k
Third letter lowercase L.
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Compaq Mini 110 won't start after cleaning Think Point virus

Hi
I'm helping my daughter with the following problem with her Compaq mini 110.
After removing the Think Point virus according to advice in different places the mini 110 don't boot after power on. The choice of pressing F10 (BIOS setup) and F9 (boot order) appears. If I don't touch any key at startup it starts accessing the hard disk for a few seconds, according to the hard disk LED and hard disk sound. Then it stops the boot procedure. Somewhere on the HP web site I read that pressing F11 repeatedly during boot would give the opportunity to choose operatings system recovery from the recovery partition. It doesn't respond to F11. Setting boot device priority doesn't seem to be a solution, since there is only one choice, so I can't force it into the recovery. I would appreciate any advice how to proceed. Below I add som additional facts.
Some threads on the forum mentions pressing F6 for recovery funktions, but it doesn't respond. There also ought to be some function on F12, but I can't figure out what. Doesn't respond anyway. Any explanation for F6 or F12?
Thanks,
Per
FACTS:
Computer model: Compaq Mini 110c-1100SO
OS is Windows XP as supplied with the computer and was never changed.
Hard disc diagnostics in BIOS setup performed without error reports (160 GB, disc type suggests Seagate hard disc)
RAM diagnostics in BIOS setup performed without error reports (1 GB)
Pressing F9 at startup gives no choices apart from the hard disk, no choice for partitions or USB boot.
I have set the delay for the user to press F10 to 5 seconds.
The display/screen works properly during BIOS setup
Power adaptor connected, and charging LED lights constantly (as I expect it to do)
Power on LED lights constantly
Wireless network LED lights constantly
Caps lock LED flashes briefly at start up, then gets dark.
When booting stops, background light on display is on, no text or symbols are shown at this state.
BIOS password has never been activated
BIOS Administrator Password has never been activated
Internal Network Adapter Boot never enabled

Hi,
On the link below is a brief guide ( and the download ) to create a bootable Antivirus disk. Create this disk on another PC and when done, start the infected PC so that you can open the DVD drive, insert the Antivirus CD you've created and then restart the infected PC to initiate the process.
http://www.techmixer.com/kaspersky-rescue-disk-load-kaspersky-antivirus-2009-using-dos/
Let me know how you get on.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Compaq mini 110

compaq mini 110 is saying enter CURRENT password
the code that comes up is CNU9354VZ1
please help, thanks

Hi,
Try a Hard Reset as follows.
Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Plug in the AC Adapter ( leave the battery out for the moment ).
Tap away at the esc key as soon as you start the notebook to enter the Start-up Menu, then select f10 to enter the Bios Menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Compaq Mni 110 Bios password

I have a HP Compaq Mini 110 with a BIOS password that prevent the OS loading. I have tried disconnecting the CMOS Battery and Power Battery etc and that dont work , the password still remains.
The system hault code is:
CNU9365QJB
If anyone can generate a Master Password for this please, I'd appreciate it.

Ravioli try.
e9lofgq5wp
Third letter lowercase L.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Compaq mini 110 CNU927BB89 ŞİFRESİNİ BULAMIYORUM

compaq mini 110 CNU927BB89 ŞİFRESİNİ BULAMIYORUM
This question was solved.
View Solution.

Hi,
Enter: e9lo7xppuo ( 3rd character is a lower case L )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I need to unlock compaq mini cq10 bios password code is CNU027599F, please help

i need to unlock compaq mini cq10 bios password code is CNU027599F, please help

Ash.
Check your other post.
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

How to recover compaq mini 110c bios password.

Hi, Please help unlock compaq mini 110c bios password.
Fatal error code generated CNU9313F9X
Thanks

Hi,
Please try this (under HP or Compaq),
Good luck,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP(Compaq) mini 110 has lights but won't turn on

My Compaq mini 110 won't power up. The light where the plug attaches is lit. The wite and blue leds on the front are lit. When the power switch is activated, the internal fan bumps but immediately stops. No noises of any kind. Battery is unplugged - just the power cord used. Main system board just replaced and it does the same thing so that is not it unless I got a bad replacement board. The powerboard has 19V at the main 4 pin connector (2 red and 2 black wires). I cannot find a pin out of voltages for the 18 wire connector running to the mainboard. Could the power board be bad but still light all lights? Not sure what to try next.

Hi,
I have the same problem. Started to night... Computer operated normaly and then just gave a bluescreen... Now works for 30min and then shuts off. I dont hear the fan work at all. I cleaned the fan with air and still dont work. How to make sure that the fan works? and how to replace if it dosent work.
- Mika

HP Mini 110 bios is asking for a password after MoBo battery got unplugged !!??

I just got the "suprise-we-gave-you-bios-password" error after I was trying to fix a hard drive & keyboard for a HP Mini 110 1116ca. The on-board battery got unpluged and now it asks for a bios password.. grrrr!
Why does HP do this!!?? re-seating a mobo battery & jumper is suppose to reset bios passwords not give you one.
Much thanks if you can help!
error:
CNU9425WSM
This question was solved.
View Solution.

Hi,
Try entering: e9lofxu0hp ( Note that the 3rd character is a lower case L and the 8th is Zero )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Need Mini 110 BIOS (binary version)

Hi,
I'm hoping someone from HP is monitoring this forum and is willing to assist.
I'm attempting to repair a Mini 110 (VF704AV, mobo #579568-001) for a friend of mine who, after attempting to upgrade the machine, could no longer get past the HP logo. Like others I've found on various forums who have had this exact problem, this one refuses to go past POST and hangs on said logo, allowing no further input from the user (a brief AMI screen confirms "CMOS checksum error" before this occurs).
After hours of trying to get around this error, I've concluded a new BIOS chip to be the only solution. However, I need the binary (.ROM) version of the file as contained with HP's SP47135.exe package. I've found a few close renditions of this file on the 'net, but prefer to have the correct version before committing to have an IC flashed.
As an electronics/computer person who dates back to the Atari days (first job), I must say I've seen more robust upgrade processes. But being unable to extract the binary file is what pushed me over the edge here. I expect better from a company of your stature.
If someone at HP can e-mail this critical file to me, I would greatly appreciate it. Thank you.

M-dog,
Thanks very much for taking the time to write. I had tried Winrar with no success, and just for yuks tried 7zip now. Same result: Both will expand the SP47135.exe file, but inside (along with a couple of .sys and .vxd files) is ANOTHER executable (308F0F19.exe) which cannot be decompressed.
As for what I've tried...everything I could find on the 'net. I had near success using a DOS-bootable USB flash drive containing a generic version of the binary file, renamed AMIBOOT.rom to supposedly trick the BIOS into some sort of "limp mode" using CTRL+Home upon power up. However, in each of 4 tries doing this, the BIOS file attempted to load and claimed to have done so successfully. But the promised "rebooting now" never occurs; rather, the fan speed goes into a gradual ramp up and nothing more. Next power cycle leads to the exact same HP logo and locked keyboard. (I've read of this scenario at least twice on other forums.)
Not caring and having nothing to lose at this point, I decided to pull the power midway through the 5th attempt at flashing in this manner. Well, that did it. I now have a totally black screen and can no longer access the flash drive. What this leads me to believe is that the others who have had this problem did not (necessarily) lose power during their failed flash attempt, hence my "less than robust" comment originally. I think the process is flawed and HP knows it.
A BIOS chip company on eBay will sell me the IC, but I have to provide the ROM data file in binary format, which is proving disgustingly difficult. Hence, my presence on this forum.
But again, thanks for your post.

Mini 110 Bios Password

i have a Hp mini 110 & I need a bios password My code is:CNU9252M4K
Hi Friend.
This question was solved.
View Solution.

First thing I need to know from the forums Admin. or a Moderator that I can give out master passwords on this forum???
I do not want to be blacklisted for doing so.
Would a PM be acceptable???
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Hp mini 110 bios password reset

When I turn on my daughters computer it goes straight to bios password, Since i never added a password this is a problem!
I tried pulling the cmos battery and that seems to have made the problem worse, any help would be greatly appreciated

Hi,
Please check your other post:
http://h30434.www3.hp.com/t5/Notebook-Recovery/bios-password-reset-on-hp-mini-110-error-code-CNU0040...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hp compaq mini 110 bios pasword

Similar Messages

Maybe you are looking for